- 25 9月, 2008 7 次提交
-
-
由 Larry Finger 提交于
If the system is misconfigured with CONFIG_RFKILL set but CONFIG_RFKILL_INPUT not set, the built-in radio LEDs will not work. In the current code, no warning is issued. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Luis added the regulatory hint stuff to this file without observing that __ieee80211_get_channel and ieee80211_get_channel really belong together. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The statically defined regdomains are used in a very convoluted way, use them instead to prime the information we have and then continue operating normally. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
A few pointers and structures in the regulatory code are const, but because it wasn't done properly a whole bunch of bogus casts were needed to compile without warning. Mark everything const properly to avoid that kind of junk code. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The recent code from Luis is an #ifdef hell and contains lots of code that's stuffed into the wrong file making a whole bunch of things needlessly non-static, and besides, what is it doing in core.c?? Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When Luis added the static regdomains back he used +/-20 of the centre frequencies to account for 40MHz bandwidth neglecting the fact that 40MHz bandwidth cannot be used on the channels close to the allowed band edges. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
The SIOCSIWSCAN handler is passed data in an iw_point structure. Some drivers erronously use an iw_param instead. On 32 bit architectures the difference isn't noticed as the flags parameter tends to be the only one used by scan handlers and is at the same offset. On 64 bit architectures the pointer in the iw_point structure means the flag parameter is at different offsets in these structures. Thanks to Jean Tourrilhes for tracking this down for orinoco, and Pavel Roskin for confirming the fix and identifying other suspect handlers. Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Acked-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 9月, 2008 2 次提交
-
-
由 David S. Miller 提交于
Reported by Thomas Graf. If we don't unlink the SKB from the queue when we send it out in aoenet_xmit(), dev_hard_start_xmit() will see skb->next as non-NULL and interpret this to mean the SKB is part of a GSO segment list. Add __skb_unlink() call to fix that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Hartkopp 提交于
This patch adds a usage documentation for the virtual CAN driver (vcan). Signed-off-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2008 31 次提交
-
-
由 David S. Miller 提交于
We must check tcp_skb_is_last() before doing a tcp_write_queue_next(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
tcp_write_queue_next() must only be made if we know that tcp_skb_is_last() evaluates to false. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
The current check wrongly uses the state of one (currently the first) tx queue for all tx queues in case of non-default qdiscs. This check mainly prevented requeuing loop with __netif_schedule(), but now it's controlled inside __qdisc_run(), while dequeuing. The wrongness of this check was first noticed by Herbert Xu. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These will be used by TCP write queue handling and elsewhere. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
A lot of code wants to iterate over an SKB queue at the top level using it's own control structure and iterator scheme. Provide skb_queue_next(), which is only valid to invoke if skb_queue_is_last() returns false. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Several bits of code want to know "is this the last SKB in a queue", and all of them implement this by hand. Provide an common interface to make this check. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Check in dequeue_skb() the state of tx_queue for requeued skb to save on locking and re-requeuing, and possibly remove the current check in qdisc_run(). Based on the idea of Alexander Duyck. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
There is no reason to call into the complicated qdiscs just to remember the last SKB where we found the device blocked. The SKB is outside of the qdiscs realm at this point. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The idea is that we can use this to get rid of ->requeue(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Handle the case of head being non-empty, by adding list->qlen to head->qlen instead of using direct assignment. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This patch add support for keeping an additional character alias associated with an network interface. This is useful for maintaining the SNMP ifAlias value which is a user defined value. Routers use this to hold information like which circuit or line it is connected to. It is just an arbitrary text label on the network device. There are two exposed interfaces with this patch, the value can be read/written either via netlink or sysfs. This could be maintained just by the snmp daemon, but it is more generally useful for other management tools, and the kernel is good place to act as an agreed upon interface to store it. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
When there is no listener socket for a received packet, send an error back to the sender. Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
Phonet endpoints are bound to individual ports. This provides a /proc/sys/net/phonet (or sysctl) interface for selecting the range of automatically allocated ports (much like the ip_local_port_range with IPv4). Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
This provides the basic SOCK_DGRAM transport protocol for Phonet. Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
This provides the socket API for the Phonet protocols family. Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
This provides support for configuring Phonet addresses, notifying Phonet configuration changes, and dumping the configuration. Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
This provides support for adding Phonet addresses to and removing Phonet addresses from network devices. Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
This is the basis for the Phonet protocol families, and introduces the ETH_P_PHONET packet type and the PF_PHONET socket family. Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-