Nothing sets function_trace_stop to disable function tracing anymore.
Remove the check for it in the arch code.

Link: http://lkml.kernel.org/r/53C54D32.6000000@zytor.comAcked-by: NH. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

function_trace_stop is no longer used to disable function tracing.
This means that archs are no longer limited if it does not support
checking this variable in the mcount trampoline.

No need to use the list_func for archs that do not support this
obsolete method.
Acked-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

function_trace_stop is no longer used to stop function tracing.
Remove the check from __ftrace_ops_list_func().

Also, call FTRACE_WARN_ON() instead of setting function_trace_stop
if a ops has no func to call.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When function tracing is being updated function_trace_stop is set to
keep from tracing the updates. This was fine when function tracing
was done from stop machine. But it is no longer done that way and
this can cause real tracing to be missed.

Remove it.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are no more kernel users of ftrace_stop() and ftrace_start().
Remove them.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

All archs now use ftrace_graph_is_dead() to stop function graph
tracing. Remove the usage of ftrace_stop() as that is no longer
needed.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Cc: Anton Blanchard <anton@samba.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Link: http://lkml.kernel.org/r/53B08317.7010501@gmx.de

Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Cc: Ralf Baechle <ralf@linux-mips.org>
Tested-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Link: http://lkml.kernel.org/r/53C8D874.9090601@monstr.euTested-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Link: http://lkml.kernel.org/r/53C54D18.3020602@zytor.comAcked-by: NH. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing.

A new function is created called ftrace_graph_is_dead(). This is called
in strategic paths to prevent function graph from doing more harm and
allowing at least a warning to be printed before the system crashes.

NOTE: ftrace_stop() is still used until all the archs are converted over
to use ftrace_graph_is_dead(). After that, ftrace_stop() will be removed.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() and ftrace_start() were added to the suspend and hibernate
process because there was some function within the work flow that caused
the system to reboot if it was traced. This function has recently been
found (restore_processor_state()). Now there's no reason to disable
function tracing while we are going into suspend or hibernate, which means
that being able to trace this will help tremendously in debugging any
issues with suspend or hibernate.

This also means that the ftrace_stop/start() functions can be removed
and simplify the function tracing code a bit.

Link: http://lkml.kernel.org/r/1518201.VD9cU33jRU@vostro.rjw.lanAcked-by: N"Rafael J. Wysocki" <rjw@rjwysocki.net>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_stop() is used to stop function tracing during suspend and resume
which removes a lot of possible debugging opportunities with tracing.
The reason was that some function in the resume path was causing a triple
fault if it were to be traced. The issue I found was that doing something
as simple as calling smp_processor_id() would reboot the box!

When function tracing was first created I didn't have a good way to figure
out what function was having issues, or it looked to be multiple ones. To
fix it, we just created a big hammer approach to the problem which was to
add a flag in the mcount trampoline that could be checked and not call
the traced functions.

Lately I developed better ways to find problem functions and I can bisect
down to see what function is causing the issue. I removed the flag that
stopped tracing and proceeded to find the problem function and it ended
up being restore_processor_state(). This function makes sense as when the
CPU comes back online from a suspend it calls this function to set up
registers, amongst them the GS register, which stores things such as
what CPU the processor is (if you call smp_processor_id() without this
set up properly, it would fault).

By making restore_processor_state() notrace, the system can suspend and
resume without the need of the big hammer tracing to stop.

Link: http://lkml.kernel.org/r/3577662.BSnUZfboWb@vostro.rjw.lanAcked-by: N"Rafael J. Wysocki" <rjw@rjwysocki.net>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The function graph trampoline is called from the function trampoline
and both do a save and restore of registers. The save of registers
done by the function trampoline when only the function graph tracer
is running is a waste of CPU cycles.

As the function graph tracer trampoline in x86 is dependent from
the function trampoline, we can call it directly when a function
is only being traced by the function graph trampoline.
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently if an arch supports function graph tracing, the core code will
just assign the function graph trampoline to the function graph addr that
gets called.

But as the old method for function graph tracing always calls the function
trampoline first and that calls the function graph trampoline, some
archs may have the function graph trampoline dependent on operations that
were done in the function trampoline. This causes function graph tracer
to break on those archs.

Instead of having the default be to set the function graph ftrace_ops
to the function graph trampoline, have it instead just set it to zero
which will keep it from jumping to a trampoline that is not set up
to be jumped directly too.

Link: http://lkml.kernel.org/r/53BED155.9040607@nvidia.comReported-by: NTuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: NTuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Needed 099ed151 "tracing: Remove ftrace_stop/start() from
 reading the trace file" for the removal of ftrace_start/stop().

Disabling reading and writing to the trace file should not be able to
disable all function tracing callbacks. There's other users today
(like kprobes and perf). Reading a trace file should not stop those
from happening.

Cc: stable@vger.kernel.org # 3.0+
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It was missing the description of set_graph_notrace file.  Add it.

Link: http://lkml.kernel.org/p/1402590233-22321-5-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When there's no entry in set_ftrace_notrace, it'll print nothing, but
it's better to print something like below like set_graph_notrace does:

  #### no functions disabled ####

Link: http://lkml.kernel.org/p/1402644246-4649-1-git-send-email-namhyung@kernel.orgReported-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When there's no entry in set_graph_notrace, it'll print below message

  #### all functions enabled ####

While this is technically correct, it's better to print like below:

  #### no functions disabled ####

Link: http://lkml.kernel.org/p/1402590233-22321-3-git-send-email-namhyung@kernel.orgReported-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ftrace_graph_notrace option is for specifying notrace filter for
function graph tracer at boot time.  It can be altered after boot
using set_graph_notrace file on the debugfs.

Link: http://lkml.kernel.org/p/1402590233-22321-2-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Convert pr_warning to standard pr_warn
Define pr_fmt(fmt) fmt to avoid any future default fmt definition

Link: http://lkml.kernel.org/p/1402141388-21144-1-git-send-email-fabf@skynet.beSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a filter file is open for writing and O_TRUNC is set, there's no
need to copy and free the filter entries.

Link: http://lkml.kernel.org/p/1402474014-28655-2-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As struct ftrace_page is managed in a single linked list, it should
free from the start page.

Link: http://lkml.kernel.org/p/1402474014-28655-1-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It seems like it's a leftover from commit 4104d326 ("ftrace:
Remove global function list and call function directly").  As it
isn't updated at all, checking its value is meaningless.

Let's get rid of it.

Link: http://lkml.kernel.org/p/1402584972-17824-1-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There's several locations in the kernel that open code the calculation
of the next location in the trace_seq buffer. This is usually done with

  p->buffer + p->len

Instead of having this open coded, supply a helper function in the
header to do it for them. This function is called trace_seq_buffer_ptr().

Link: http://lkml.kernel.org/p/20140626220129.452783019@goodmis.orgAcked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This fixes checkpatch warning:

"WARNING: debugfs_remove(NULL) is safe this check is probably not required"
Link: http://lkml.kernel.org/p/1403802871-8599-1-git-send-email-fabf@skynet.beSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

trace_seq_reserve() has no users in the kernel, it just wastes space.
Remove it.

Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently trace_seq_putmem_hex() can only take as a parameter a pointer
to something that is 8 bytes or less, otherwise it will overflow the
buffer. This is protected by a macro that encompasses the call to
trace_seq_putmem_hex() that has a BUILD_BUG_ON() for the variable before
it is passed in. This is not very robust and if trace_seq_putmem_hex() ever
gets used outside that macro it will cause issues.

Instead of only being able to produce a hex output of memory that is for
a single word, change it to be more robust and allow any size input.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

For using trace_seq_*() functions in NMI context, I posted a patch to move
it to the lib/ directory. This caused Andrew Morton to take a look at the code.
He went through and gave a lot of comments about missing kernel doc,
inconsistent types for the save variable, mix match of EXPORT_SYMBOL_GPL()
and EXPORT_SYMBOL() as well as missing EXPORT_SYMBOL*()s. There were
a few comments about the way variables were being compared (int vs uint).

All these were good review comments and should be implemented regardless of
if trace_seq.c should be moved to lib/ or not.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace_seq_*() functions are a nice utility that allows users to manipulate
buffers with printf() like formats. It has its own trace_seq.h header in
include/linux and should be in its own file. Being tied with trace_output.c
is rather awkward.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Simplify ftrace_hash_disable/enable path in ftrace_hash_move
for hardening the process if the memory allocation failed.

Link: http://lkml.kernel.org/p/20140617110442.15167.81076.stgit@kbuild-fedora.novalocalSigned-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Strings should be copied with strlcpy instead of strncpy when they will
later be printed via %s. This guarantees that they terminate with a
NUL '\0' character and do not run pass the end of the allocated string.

This is only for sample code, but it should stil represent a good
role model.

Link: http://lkml.kernel.org/p/51C2E204.1080501@huawei.comSigned-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The enabled_functions is used to help debug the dynamic function tracing.
Adding what trampolines are attached to files is useful for debugging.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Function graph tracing is a bit different than the function tracers, as
it is processed after either the ftrace_caller or ftrace_regs_caller
and we only have one place to modify the jump to ftrace_graph_caller,
the jump needs to happen after the restore of registeres.

The function graph tracer is dependent on the function tracer, where
even if the function graph tracing is going on by itself, the save and
restore of registers is still done for function tracing regardless of
if function tracing is happening, before it calls the function graph
code.

If there's no function tracing happening, it is possible to just call
the function graph tracer directly, and avoid the wasted effort to save
and restore regs for function tracing.

This requires adding new flags to the dyn_ftrace records:

  FTRACE_FL_TRAMP
  FTRACE_FL_TRAMP_EN

The first is set if the count for the record is one, and the ftrace_ops
associated to that record has its own trampoline. That way the mcount code
can call that trampoline directly.

In the future, trampolines can be added to arbitrary ftrace_ops, where you
can have two or more ftrace_ops registered to ftrace (like kprobes and perf)
and if they are not tracing the same functions, then instead of doing a
loop to check all registered ftrace_ops against their hashes, just call the
ftrace_ops trampoline directly, which would call the registered ftrace_ops
function directly.

Without this patch perf showed:

  0.05%  hackbench  [kernel.kallsyms]  [k] ftrace_caller
  0.05%  hackbench  [kernel.kallsyms]  [k] arch_local_irq_save
  0.05%  hackbench  [kernel.kallsyms]  [k] native_sched_clock
  0.04%  hackbench  [kernel.kallsyms]  [k] __buffer_unlock_commit
  0.04%  hackbench  [kernel.kallsyms]  [k] preempt_trace
  0.04%  hackbench  [kernel.kallsyms]  [k] prepare_ftrace_return
  0.04%  hackbench  [kernel.kallsyms]  [k] __this_cpu_preempt_check
  0.04%  hackbench  [kernel.kallsyms]  [k] ftrace_graph_caller

See that the ftrace_caller took up more time than the ftrace_graph_caller
did.

With this patch:

  0.05%  hackbench  [kernel.kallsyms]  [k] __buffer_unlock_commit
  0.04%  hackbench  [kernel.kallsyms]  [k] call_filter_check_discard
  0.04%  hackbench  [kernel.kallsyms]  [k] ftrace_graph_caller
  0.04%  hackbench  [kernel.kallsyms]  [k] sched_clock

The ftrace_caller is no where to be found and ftrace_graph_caller still
takes up the same percentage.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The usage of uprobe_buffer_enable() added by dcad1a20 is very wrong,

1. uprobe_buffer_enable() and uprobe_buffer_disable() are not balanced,
   _enable() should be called only if !enabled.

2. If uprobe_buffer_enable() fails probe_event_enable() should clear
   tp.flags and free event_file_link.

3. If uprobe_register() fails it should do uprobe_buffer_disable().

Link: http://lkml.kernel.org/p/20140627170146.GA18332@redhat.comAcked-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Fixes: dcad1a20 "tracing/uprobes: Fetch args before reserving a ring buffer"
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

I do not know why dd9fa555 "tracing/uprobes: Move argument fetching
to uprobe_dispatcher()" added the UPROBE_HANDLER_REMOVE, but it looks
wrong.

OK, perhaps it makes sense to avoid store_trace_args() if the tracee is
nacked by uprobe_perf_filter(). But then we should kill the same code
in uprobe_perf_func() and unify the TRACE/PROFILE filtering (we need to
do this anyway to mix perf/ftrace). Until then this code actually adds
the pessimization because uprobe_perf_filter() will be called twice and
return T in likely case.

Link: http://lkml.kernel.org/p/20140627170143.GA18329@redhat.comAcked-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add WARN_ON's into uprobe_unregister() and uprobe_apply() to ensure
that nobody tries to play with the dead uprobe/consumer. This helps
to catch the bugs like the one fixed by the previous patch.

In the longer term we should fix this poorly designed interface.
uprobe_register() should return "struct uprobe *" which should be
passed to apply/unregister. Plus other semantic changes, see the
changelog in commit 41ccba02.

Link: http://lkml.kernel.org/p/20140627170140.GA18322@redhat.comAcked-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>