Found by static analysis tool, this was harmless as the pt was not
used out of scope though.

Introduced by commit 678d96fb
("drm/i915: Track GEN6 page table usage").

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl, so that it
is different from the DRM_IOCTL_I915_SET_SPRITE_COLORKEY ioctl.

Note that this is just for accuracy, the ioctl implementation itself is totally
unused and already ripped out.
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
[danvet: Add note that this is a dead ioctl.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's completely unused and Tommi noticed that the #define is borked
since forever. I've done a git search in userspace and only found
broken definitions and no users anywhere.

Cc: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Move towards atomic by using the legacy modeset's drm_atomic_state
instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move towards atomic by using the legacy modeset's drm_atomic_state
instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of using connector->new_encoder, get the same information from
the pipe_config, thus making the function ready for the atomic
conversion.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move towards atomic by using the legacy modeset's drm_atomic_state
instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move towards atomic by using the legacy modeset's drm_atomic_state
instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move towards atomic by using the legacy modeset's drm_atomic_state
instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Keep the if (!connector) continue; separate so that it's
easier to eventually extract a for_each_connector_in_state iterator.
And because of the upcast it's also safer.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move towards atomic by using the legacy modeset's drm_atomic_state
instead.

v2: Move call to drm_atomic_add_affected_connectors() to
    intel_modeset_compute_config(). (Daniel)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Resurrect the ret local variable which I've dropped from an
earlier patch and which is now needed.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With this in place, we can start converting pieces of the modeset code
to look at the connector atomic state instead of the staged config.

v2: Handle the load detect staged config changes too. (Ander)
    Remove unnecessary blank line. (Daniel)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Keep that state updated so that we can write code that depends on it on
the follow up patches.

v2: Fix BUG due to stale connector_state->crtc value. (Chandra)

v3: Update comment about dummy state connectors. (Chandra)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So that we can add connector states to the drm_atomic_state used in the
legacy modeset.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_pm.c:2913:4-5: Unneeded semicolon

 Removes unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For consistency, allocate a new crtc_state for a crtc that is being
disabled. Previously only the enabled value of the current state would
change.

v2: Rebase on v5 of previous patch. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Resolve rebase conflict.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For the atomic conversion, the mode set paths need to be changed to rely
on an atomic state instead of using the staged config. By using an
atomic state for the legacy code, we will be able to convert the code
base in small chunks.

v2: Squash patch that adds stat argument to intel_set_mode(). (Ander)
    Make every caller of intel_set_mode() allocate state. (Daniel)
    Call drm_atomic_state_clear() in set config's error path. (Daniel)

v3: Copy staged config to atomic state in force restore path. (Ander)

v4: Don't update ->new_config for disabled pipes in __intel_set_mode(),
    since it is expected to be NULL in that case. (Ander)

v5: Don't change return type of intel_modeset_pipe_config(). (Chandra)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Remove spurious ret local variable due to changes in v5.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For now this is not necessary since intel_set_mode() doesn't acquire any
new locks. However, once that function is converted to atomic, that will
change, since we'll pass an atomic state to it, and that needs to have
the right acquire context set.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The pattern of getting the crtc state with drm_atomic_get_crtc_state()
and then converting it to intel_crtc_state will repeat quite often in
the following patches, so add a helper function to save some typing.

v2: Fix upcasting so that crtc_state base field could be moved. (Daniel)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we only set preserve_bios_swizzling when the initial fb is
shared and totally miss the single-screen case. Fix this by
consolidating all the logic for both cases.

This seems to go back to when swizzle preservation was originally
merged in

commit d9ceb816
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Oct 9 12:57:43 2014 -0700

    drm/i915: preserve swizzle settings if necessary v4

Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

In spirit with

commit 5724dbd1
Author: Damien Lespiau <damien.lespiau@intel.com>
Date:   Tue Jan 20 12:51:52 2015 +0000

    drm/i915: Rename plane_config to initial_plane_config

to make it clear that this code is all special-purpose for the initial
plane takeover.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

psr.active is being unset out of the if so this here is useless and
duplicated.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is a very similar bug in the load detect code fixed in

commit 9128b040
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Mar 3 17:31:21 2015 +0100

    drm/i915: Fix modeset state confusion in the load detect code

But this time around it was the initial fb code that forgot to update
the plane->crtc pointer. Otherwise it's the exact same bug, with the
exact same restrains (any set_config call/ioctl that doesn't disable
the pipe papers over the bug for free, so fairly hard to hit in normal
testing). So if you want the full explanation just go read that one
over there - it's rather long ...

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-and-tested-by: NJosh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This flag was being mostly used as a meta flag in some
cases and not covering other cases.

One of the risks is that it was masking some frontbuffer
trackings without disabling PSR.

So, better to kill this at once and avoid umbrella parameters.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Drop unused out: label to appease gcc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The faulting virtual address is >32bits and has been moved
to different registers. Add to error state and output upper
register first, in the same line for easy reconstruction of
the fault address.

v2: correct gen masking (Michel)
v3: s/TBL/TLB (Ville)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It should have been negative since it is returned with ERR_PTR().

Introduced in new code commit:

   commit 50470bb0
   Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
   Date:   Mon Mar 23 11:10:36 2015 +0000

    drm/i915/skl: Support secondary (rotated) frame buffer mapping
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Or users can just spam the log all they want.

Issue introduced in

commit 9a8f0a12
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Fri Feb 27 11:15:24 2015 +0000

    drm/i915/skl: Allow Y (and Yf) frame buffer creation

References: https://bugs.freedesktop.org/show_bug.cgi?id=89628Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As part of allocation of the drm_i915_private variable, drrs capability
enum is initialized to DRRS_NOT_SUPPORTED. Hence need not initialize at
each connector init.

Moreover initializing this enum at connector init will reset
the successful DRRS initialization of previous connector, as we have
the DRRS support for only one panel at a time.
Signed-off-by: NRamalingam C <ramalingam.c@intel.com>
Reviewed-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The logical place for clearing the RPS latched interrupt bits is when
resetting the RPS interrupts, so move the corresponding part from the RPS
disable function to the reset function. During resetting we already
cleared the IIR bits, so the only thing missing there was clearing pm_iir.

Note that we call gen6_disable_rps_interrupts() also during driver load
and resume time via intel_uncore_sanitize() when i915 interrupts are
still not installed. If there are any pending RPS bits at this point
(which after this patch wouldn't be cleared) they will be cleared by the
reset code via the interrupt preinstall hooks.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When disabling RPS interrupts there is a race where we disable RPS
inerrupts while the interrupt handler is running and the handler has
already latched the pending RPS interrupt from the master IIR register.
Afterwards the disabling path clears the PM IIR bits, making the state
of pending interrupts inconsistent from the interrupt handler's point of
view. This triggers the following warning: "The master control interrupt
lied (PM)!".

To fix this make sure that any running interrupt handler (which may
have already latched the master IIR) finishes before clearing the IIR
bits.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87347Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Pass in rotation info to sprite plane updates as well.

v3: Use helper to determine 90/270 rotation. (Michel Thierry)

v4: Rebased for fb modifiers and atomic changes.

For: VIZ-4546
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v3)
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Need to do this in order to support 90/270 rotated display.

v2: Pass in drm_plane instead of plane index to intel_obj_display_address.

v3:
    * Renamed intel_obj_display_address to intel_plane_obj_offset.
      (Chris Wilson)
    * Simplified rotation check to bitwise AND. (Chris Wilson)

v4:
    * Extracted 90/270 rotation check into a helper function. (Michel Thierry)

v5:
    * Rebased for ggtt view changes.

For: VIZ-4545
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

90/270 rotated scanout needs a rotated GTT view of the framebuffer.

This is put in a separate VMA with a dedicated ggtt view and wired such that
it is created when a framebuffer is pinned to a 90/270 rotated plane.

Rotation is only possible with Yb/Yf buffers and error is propagated to
user space in case of a mismatch.

Special rotated page view is constructed at the VMA creation time by
borrowing the DMA addresses from obj->pages.

v2:
    * Do not bother with pages for rotated sg list, just populate the DMA
      addresses. (Daniel Vetter)
    * Checkpatch cleanup.

v3:
    * Rebased on top of new plane handling (create rotated mapping when
      setting the rotation property).
    * Unpin rotated VMA on unpinning from display plane.
    * Simplify rotation check using bitwise AND. (Chris Wilson)

v4:
    * Fix unpinning of optional rotated mapping so it is really considered
      to be optional.

v5:
   * Rebased for fb modifier changes.
   * Rebased for atomic commit.
   * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter)

v6:
   * Rebased after preparatory work has been extracted out. (Daniel Vetter)

v7:
   * Slightly simplified tiling geometry calculation.
   * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter)

v8:
   * Do not use i915_gem_obj_size to get object size since that actually
     returns the size of an VMA which may not exist.
   * Rebased for ggtt view changes.

v9:
   * Rebased after code review changes on the preceding patches.
   * Tidy function definitions. (Joonas Lahtinen)

For: VIZ-4726
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4)
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For now only default implementation defaulting to normal view.

v2: Some code review cleanups. (Joonas Lahtinen)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Plane state carries the rotation information which is needed for determining
the appropriate GGTT view type.

This just adds the parameter with the actual usage coming in future patches.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To support frame buffer rotation we need to be able to pass on the information
on what kind of GGTT view is required for display.

This patch just adds the parameter and makes all the callers default to the
normal view.

v2: Rebased for ggtt view changes.
v3: Don't limit PIN_MAPPABLE to normal views just yet. (Joonas Lahtinen)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v3)
[danvet: s/BUG/WARN/ in the patch hunk because. At least where the
BUG_ON isn't fatal right away.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It will be used in a later patch and also convert all height parameters
from int to unsigned int.

v2: Rebased for fb modifiers.
v3: Fixed v2 rebase.
v4:
   * Height should be unsigned int.
   * Make it take pixel_format for consistency and simplicity.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v4)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

msleep() can sleep for way too long, so switch wait_for() to use
usleep_range() instead. Following a totally unscientific method
I just picked the range as W-2W.

This cuts the i915 init time on my BSW to almost half:
- initcall i915_init+0x0/0xa8 [i915] returned 0 after 419977 usecs
+ initcall i915_init+0x0/0xa8 [i915] returned 0 after 238419 usecs

Note that I didn't perform any other benchmarks on this so far.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

While running kmemleak chasing a different memleak, I saw that the
capture_error_state function was leaking some objects, for example:

unreferenced object 0xffff8800a9b72148 (size 8192):
  comm "kworker/u16:0", pid 1499, jiffies 4295201243 (age 990.096s)
  hex dump (first 32 bytes):
    00 00 04 00 00 00 00 00 5d f4 ff ff 00 00 00 00  ........].......
    00 30 b0 01 00 00 00 00 37 00 00 00 00 00 00 00  .0......7.......
  backtrace:
    [<ffffffff811e5ae4>] create_object+0x104/0x2c0
    [<ffffffff8178f50a>] kmemleak_alloc+0x7a/0xc0
    [<ffffffff811cde4b>] __kmalloc+0xeb/0x220
    [<ffffffffa038f1d9>] kcalloc.constprop.12+0x2d/0x2f [i915]
    [<ffffffffa0316064>] i915_capture_error_state+0x3f4/0x1660 [i915]
    [<ffffffffa03207df>] i915_handle_error+0x7f/0x660 [i915]
    [<ffffffffa03210f7>] i915_hangcheck_elapsed+0x2e7/0x470 [i915]
    [<ffffffff8108d574>] process_one_work+0x144/0x490
    [<ffffffff8108dfbd>] worker_thread+0x11d/0x530
    [<ffffffff81094079>] kthread+0xc9/0xe0
    [<ffffffff817a2398>] ret_from_fork+0x58/0x90
    [<ffffffffffffffff>] 0xffffffffffffffff

The following objects are allocated in i915_gem_capture_buffers, but not
released in i915_error_state_free:
  - error->active_bo_count
  - error->pinned_bo
  - error->pinned_bo_count
  - error->active_bo[vm_count] (allocated in i915_gem_capture_vm).

The leaks were introduced by
commit 95f5301d
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Jul 31 17:00:15 2013 -0700

    drm/i915: Update error capture for VMs

v2: Reuse iterator and add culprit commit details (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Write the PLANE_SURF register instead of PLANE_CTL to arm the double
buffer regisrter update.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace the RMW access with explicit initialization of the entire plane
control register, as was done for primary planes in:

 commit f45651ba
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Fri Aug 8 21:51:10 2014 +0300

    drm/i915: Eliminate rmw from .update_primary_plane()

The automagic primary plane disable is still doing RMWs, but that will
require more work to untangle, so leave it alone for now.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>