- 26 6月, 2018 1 次提交
-
-
由 Sean Young 提交于
If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not possible to attach, detach or query IR BPF programs to /dev/lircN devices, making them impossible to use. For embedded devices, it should be possible to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled. This change requires some refactoring, since bpf_prog_{attach,detach,query} functions are now always compiled, but their code paths for cgroups need moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c, moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not require #ifdefs since that is already conditionally compiled. Fixes: f4364dcf ("media: rc: introduce BPF_PROG_LIRC_MODE2") Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 25 6月, 2018 1 次提交
-
-
由 Jakub Kicinski 提交于
Stopping offload completely if replace of program failed dates back to days of transparent offload. Back then we wanted to silently fall back to the in-driver processing. Today we mark programs for offload when they are loaded into the kernel, so the transparent offload is no longer a reality. Flags check in the driver will only allow replace of a driver program with another driver program or an offload program with another offload program. When driver program is replaced stopping offload is a no-op, because driver program isn't offloaded. When replacing offloaded program if the offload fails the entire operation will fail all the way back to user space and we should continue using the old program. IOW when replacing a driver program stopping offload is unnecessary and when replacing offloaded program - it's a bug, old program should continue to run. In practice this bug would mean that if offload operation was to fail (either due to FW communication error, kernel OOM or new program being offloaded but for a different netdev) driver would continue reporting that previous XDP program is offloaded but in fact no program will be loaded in hardware. The failure is fairly unlikely (found by inspection, when working on the code) but it's unpleasant. Backport note: even though the bug was introduced in commit cafa92ac ("nfp: bpf: add support for XDP_FLAGS_HW_MODE"), this fix depends on commit 441a3303 ("net: xdp: don't allow device-bound programs in driver mode"), so this fix is sufficient only in v4.15 or newer. Kernels v4.13.x and v4.14.x do need to stop offload if it was transparent/opportunistic, i.e. if XDP_FLAGS_HW_MODE was not set on running program. Fixes: cafa92ac ("nfp: bpf: add support for XDP_FLAGS_HW_MODE") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 22 6月, 2018 5 次提交
-
-
由 Yonghong Song 提交于
On one of our production test machine, when running bpf selftest test_sockmap, I got the following error: # sudo ./test_sockmap libbpf: failed to create map (name: 'sock_map'): Operation not permitted libbpf: failed to load object 'test_sockmap_kern.o' libbpf: Can't get the 0th fd from program sk_skb1: only -1 instances ...... load_bpf_file: (-1) Operation not permitted ERROR: (-1) load bpf failed The error is due to not-big-enough rlimit struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY}; The test already includes "bpf_rlimit.h", which sets current and max rlimit to RLIM_INFINITY. Let us just use it. Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jeffrin Jose T 提交于
The test_kmod.sh script require root privilege for the successful execution of the test. This patch is to notify the user about the privilege the script demands for the successful execution of the test. Signed-off-by: NJeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Daniel Borkmann 提交于
Jakub Kicinski says: ==================== Two small fixes for error handling in bpftool prog load, first patch removes a duplicated message, second one frees resources correctly. Multiple error messages break JSON: { "error": "can't pin the object (/sys/fs/bpf/a): File exists" },{ "error": "failed to pin program" } ==================== Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
Remembering to close all descriptors and free memory may not seem important in a user space tool like bpftool, but if we were to run in batch mode the consumed resources start to add up quickly. Make sure program load closes the libbpf object (which unloads and frees it). Fixes: 49a086c2 ("bpftool: implement prog load command") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
do_pin_fd() will already print out an error message if something goes wrong. Printing another error is unnecessary and will break JSON output, since error messages are full objects: $ bpftool -jp prog load tracex1_kern.o /sys/fs/bpf/a { "error": "can't pin the object (/sys/fs/bpf/a): File exists" },{ "error": "failed to pin program" } Fixes: 49a086c2 ("bpftool: implement prog load command") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 21 6月, 2018 13 次提交
-
-
由 Anders Roxell 提交于
sha: 702353b5 ("selftest: add test for TCP_INQ") forgot to add tcp_inq to .gitignore. Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harini Katakam 提交于
When delta passed to gem_ptp_adjtime is negative, the sign is maintained in the ns_to_timespec64 conversion. Hence timespec_add should be used directly. timespec_sub will just subtract the negative value thus increasing the time difference. Signed-off-by: NHarini Katakam <harini.katakam@xilinx.com> Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Commit 296d4856 ("ipvlan: inherit MTU from master device") adjusted the mtu from the master device when creating a ipvlan device, but it would also override the mtu value set in rtnl_create_link. It causes IFLA_MTU param not to take effect. So this patch is to not adjust the mtu if IFLA_MTU param is set when creating a ipvlan device. Fixes: 296d4856 ("ipvlan: inherit MTU from master device") Reported-by: NJianlin Shi <jishi@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
Currently it is incrementing SctpFragUsrMsgs when the user message size is of the exactly same size as the maximum fragment size, which is wrong. The fix is to increment it only when user message is bigger than the maximum fragment size. Fixes: bfd2e4b8 ("sctp: refactor sctp_datamsg_from_user") Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
After commit 9facc336 ("bpf: reject any prog that failed read-only lock") offsetof(struct bpf_binary_header, image) became 3 instead of 4, breaking powerpc BPF badly, since instructions need to be word aligned. Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Tenart 提交于
When injecting frames in the Ocelot switch driver an injection header (IFH) should be used to configure various parameters related to a given frame, such as the port onto which the frame should be departed or its vlan id. Other parameters in the switch configuration can led to an injected frame being sent without an IFH but this led to various issues as the per-frame parameters are then not used. This is especially true when using multiple ports for injection. The IFH was injected with the wrong endianness which led to the switch not taking it into account as the IFH_INJ_BYPASS bit was then unset. (The bit tells the switch to use the IFH over its internal configuration). This patch fixes it. In addition to the endianness fix, the IFH is also fixed. As it was (unwillingly) unused, some of its fields were not configured the right way. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bartosz Golaszewski 提交于
Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ville Syrjälä 提交于
Pass the correct thing to rtl8169_interrupt() from netpoll. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: netdev@vger.kernel.org Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Fixes: ebcd5daa ("r8169: change interrupt handler argument type") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vakul Garg 提交于
In function strp_data_ready(), it is useless to call queue_work if the state of strparser is already paused. The state checking should be done before calling queue_work. The change reduces the context switches and improves the ktls-rx throughput by approx 20% (measured on cortex-a53 based platform). Signed-off-by: NVakul Garg <vakul.garg@nxp.com> Acked-by: NDave Watson <davejwatson@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anders Roxell 提交于
Add fragments to pass bridge and vlan tests. Fixes: 33b01b7b ("selftests: add rtnetlink test script") Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
Use $(OBJDUMP) instead of literal 'objdump' to avoid using host toolchain when cross compiling. Fixes: 421780fd ("bpfilter: fix build error") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Reported-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Jason Gunthorpe: "Here are eight fairly small fixes collected over the last two weeks. Regression and crashing bug fixes: - mlx4/5: Fixes for issues found from various checkers - A resource tracking and uverbs regression in the core code - qedr: NULL pointer regression found during testing - rxe: Various small bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/rxe: Fix missing completion for mem_reg work requests RDMA/core: Save kernel caller name when creating CQ using ib_create_cq() IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()' RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM IB/mlx5: Fix return value check in flow_counters_set_data() IB/mlx5: Fix memory leak in mlx5_ib_create_flow IB/rxe: avoid double kfree skb
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann. 2) Fix ATM VCC memory accounting, from David Woodhouse. 3) fib6_info objects need RCU freeing, from Eric Dumazet. 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern. 5) Fix clobbered error code in enic_open() failure path, from Govindarajulu Varadarajan. 6) Propagate dev_get_valid_name() error returns properly, from Li RongQing. 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski. 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from Davide Caratti. 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) ip: limit use of gso_size to udp stmmac: fix DMA channel hang in half-duplex mode net: stmmac: socfpga: add additional ocp reset line for Stratix10 net: sungem: fix rx checksum support bpfilter: ignore binary files bpfilter: fix build error net/usb/drivers: Remove useless hrtimer_active check net/sched: act_ife: preserve the action control in case of error net/sched: act_ife: fix recursive lock and idr leak net: ethernet: fix suspend/resume in davinci_emac net: propagate dev_get_valid_name return code enic: do not overwrite error code net/tcp: Fix socket lookups with SO_BINDTODEVICE ptp: replace getnstimeofday64() with ktime_get_real_ts64() net/ipv6: respect rcu grace period before freeing fib6_info net: net_failover: fix typo in net_failover_slave_register() ipvlan: use ETH_MAX_MTU as max mtu net: hamradio: use eth_broadcast_addr enic: initialize enic->rfs_h.lock in enic_probe MAINTAINERS: Add Sam as the maintainer for NCSI ...
-
- 20 6月, 2018 20 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke - fix for hibernation in Intel ISH driver, from Even Xu - crash fix for hid-steam driver, from Rodrigo Rivas Costa - new device ID addition to google-hammer driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation HID: steam: use hid_device.driver_data instead of hid_set_drvdata() HID: google: Add support for whiskers
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping rename from Christoph Hellwig: "Move all the dma-mapping code to kernel/dma and lose their dma-* prefixes" * tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move all DMA mapping code to kernel/dma dma-mapping: use obj-y instead of lib-y for generic dma ops
-
由 Jason Gerecke 提交于
The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains a typo which defines an incorrect logical maximum Y value. This causes a small portion of the bottom of the tablet to become unusable (both because the area is below the "bottom" of the tablet and because 'wacom_wac_event' ignores out-of-range values). It also results in a skewed aspect ratio. To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites the data with the correct value. Signed-off-by: NJason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Even Xu 提交于
Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by: NEven Xu <even.xu@intel.com> Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Rodrigo Rivas Costa 提交于
When creating the low-level hidraw device, the reference to steam_device was stored using hid_set_drvdata(). But this value is not guaranteed to be kept when set before calling probe. If this pointer is reset, it crashes when opening the emulated hidraw device. It looks like hid_set_drvdata() is for users "avobe" this hid_device, while hid_device.driver_data it for users "below" this one. In this case, we are creating a virtual hidraw device, so we must use hid_device.driver_data. Signed-off-by: NRodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by: NMariusz Ceier <mceier+kernel@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Linus Torvalds 提交于
The rewrite of the cmdline fetching missed the fact that we used to also return the final terminating NUL character of the last argument. I hadn't noticed, and none of the tools I tested cared, but something obviously must care, because Michal Kubecek noticed the change in behavior. Tweak the "find the end" logic to actually include the NUL character, and once past the eend of argv, always start the strnlen() at the expected (original) argument end. This whole "allow people to rewrite their arguments in place" is a nasty hack and requires that odd slop handling at the end of the argv array, but it's our traditional model, so we continue to support it. Repored-and-bisected-by: NMichal Kubecek <mkubecek@suse.cz> Reviewed-and-tested-by: NMichal Kubecek <mkubecek@suse.cz> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Willem de Bruijn 提交于
The ipcm(6)_cookie field gso_size is set only in the udp path. The ip layer copies this to cork only if sk_type is SOCK_DGRAM. This check proved too permissive. Ping and l2tp sockets have the same type. Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to exclude ping sockets. v1 -> v2 - remove irrelevant whitespace changes Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Reported-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhadram Varka 提交于
HW does not support Half-duplex mode in multi-queue scenario. Fix it by not advertising the Half-Duplex mode if multi-queue enabled. Signed-off-by: NBhadram Varka <vbhadram@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dinh Nguyen 提交于
The Stratix10 platform has an additional reset line, OCP(Open Core Protocol), that also needs to get deasserted for the stmmac ethernet controller to work. Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build dwmac-socfpga. Also, remove the redundant check for the reset controller pointer. The reset driver already checks for the pointer and returns 0 if the pointer is NULL. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), sungem owners reported the infamous "eth0: hw csum failure" message. CHECKSUM_COMPLETE has in fact never worked for this driver, but this was masked by the fact that upper stacks had to strip the FCS, and therefore skb->ip_summed was set back to CHECKSUM_NONE before my recent change. Driver configures a number of bytes to skip when the chip computes the checksum, and for some reason only half of the Ethernet header was skipped. Then a second problem is that we should strip the FCS by default, unless the driver is updated to eventually support NETIF_F_RXFCS in the future. Finally, a driver should check if NETIF_F_RXCSUM feature is enabled or not, so that the admin can turn off rx checksum if wanted. Many thanks to Andreas Schwab and Mathieu Malaterre for their help in debugging this issue. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMeelis Roos <mroos@linux.ee> Reported-by: NMathieu Malaterre <malat@debian.org> Reported-by: NAndreas Schwab <schwab@linux-m68k.org> Tested-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is enabled, add it to .gitignore to avoid committing it. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
bpfilter Makefile assumes that the system locale is en_US, and the parsing of objdump output fails. Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns only 2 processes instead of 7. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
The code does: if (hrtimer_active(&t)) hrtimer_cancel(&t); However, hrtimer_cancel() checks if the timer is active, so the test above is pointless. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
in the following script # tc actions add action ife encode allow prio pass index 42 # tc actions replace action ife encode allow tcindex drop index 42 the action control should remain equal to 'pass', if the kernel failed to replace the TC action. Pospone the assignment of the action control, to ensure it is not overwritten in the error path of tcf_ife_init(). Fixes: ef6980b6 ("introduce IFE action") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
a recursive lock warning [1] can be observed with the following script, # $TC actions add action ife encode allow prio pass index 42 IFE type 0xED3E # $TC actions replace action ife encode allow tcindex pass index 42 in case the kernel was unable to run the last command (e.g. because of the impossibility to load 'act_meta_skbtcindex'). For a similar reason, the kernel can leak idr in the error path of tcf_ife_init(), because tcf_idr_release() is not called after successful idr reservation: # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No such file or directory We have an error talking to the kernel # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No space left on device We have an error talking to the kernel # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47 IFE type 0xFEFE RTNETLINK answers: No space left on device We have an error talking to the kernel Since tcfa_lock is already taken when the action is being edited, a call to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock again. On the other hand, tcf_idr_release() needs to be called in the error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation. Fix both problems in tcf_ife_init(). Since the cleanup() routine can now be called when ife->params is NULL, also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu). [1] ============================================ WARNING: possible recursive locking detected 4.17.0-rc4.kasan+ #417 Tainted: G E -------------------------------------------- tc/3932 is trying to acquire lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife] but task is already holding lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&p->tcfa_lock)->rlock); lock(&(&p->tcfa_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by tc/3932: #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife] #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] stack backtrace: CPU: 3 PID: 3932 Comm: tc Tainted: G E 4.17.0-rc4.kasan+ #417 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x9a/0xeb __lock_acquire+0xf43/0x34a0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? __mutex_lock+0x62f/0x1240 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_acquire+0x10b/0x330 lock_acquire+0x10b/0x330 ? tcf_ife_cleanup+0x19/0x80 [act_ife] _raw_spin_lock_bh+0x38/0x70 ? tcf_ife_cleanup+0x19/0x80 [act_ife] tcf_ife_cleanup+0x19/0x80 [act_ife] __tcf_idr_release+0xff/0x350 tcf_ife_init+0xdde/0x13c0 [act_ife] ? ife_exit_net+0x290/0x290 [act_ife] ? __lock_is_held+0xb4/0x140 tcf_action_init_1+0x67b/0xad0 ? tcf_action_dump_old+0xa0/0xa0 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? memset+0x1f/0x40 tcf_action_init+0x30f/0x590 ? tcf_action_init_1+0xad0/0xad0 ? memset+0x1f/0x40 tc_ctl_action+0x48e/0x5e0 ? mutex_lock_io_nested+0x1160/0x1160 ? tca_action_gd+0x990/0x990 ? sched_clock+0x5/0x10 ? find_held_lock+0x39/0x1d0 rtnetlink_rcv_msg+0x4da/0x990 ? validate_linkmsg+0x680/0x680 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 netlink_rcv_skb+0x127/0x350 ? validate_linkmsg+0x680/0x680 ? netlink_ack+0x970/0x970 ? __kmalloc_node_track_caller+0x304/0x3a0 netlink_unicast+0x40f/0x5d0 ? netlink_attachskb+0x580/0x580 ? _copy_from_iter_full+0x187/0x760 ? import_iovec+0x90/0x390 netlink_sendmsg+0x67f/0xb50 ? netlink_unicast+0x5d0/0x5d0 ? copy_msghdr_from_user+0x206/0x340 ? netlink_unicast+0x5d0/0x5d0 sock_sendmsg+0xb3/0xf0 ___sys_sendmsg+0x60a/0x8b0 ? copy_msghdr_from_user+0x340/0x340 ? lock_downgrade+0x5e0/0x5e0 ? tty_write_lock+0x18/0x50 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_downgrade+0x5e0/0x5e0 ? lock_acquire+0x10b/0x330 ? __audit_syscall_entry+0x316/0x690 ? current_kernel_time64+0x6b/0xd0 ? __fget_light+0x55/0x1f0 ? __sys_sendmsg+0xd2/0x170 __sys_sendmsg+0xd2/0x170 ? __ia32_sys_shutdown+0x70/0x70 ? syscall_trace_enter+0x57a/0xd60 ? rcu_read_lock_sched_held+0xdc/0x110 ? __bpf_trace_sys_enter+0x10/0x10 ? do_syscall_64+0x22/0x480 do_syscall_64+0xa5/0x480 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fd646988ba0 RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0 RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003 RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000 R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100 Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding") Fixes: ef6980b6 ("introduce IFE action") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bartosz Golaszewski 提交于
This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") and adds a comment which should stop anyone from reintroducing the same "fix" in the future. We can't use bus_find_device_by_name() here because the device name is not guaranteed to be 'davinci_mdio'. On some systems it can be 'davinci_mdio.0' so we need to use strncmp() against the first part of the string to correctly match it. Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") Cc: stable@vger.kernel.org Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
if dev_get_valid_name failed, propagate its return code and remove the setting err to ENODEV, it will be set to 0 again before dev_change_net_namespace exits. Signed-off-by: NLi RongQing <lirongqing@baidu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e26 ("enic: enable rq before updating rq descriptors") Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups need to fail if dev_match is not true. Currently, a packet to a given port can match a socket bound to device when it should not. In the VRF case, this causes the lookup to hit a VRF socket and not a global socket resulting in a response trying to go through the VRF when it should not. Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups") Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups") Reported-by: NLou Berger <lberger@labn.net> Diagnosed-by: NRenato Westphal <renato@opensourcerouting.org> Tested-by: NRenato Westphal <renato@opensourcerouting.org> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
getnstimeofday64() is deprecated and getting replaced throughout the kernel with ktime_get_*() based helpers for a more consistent interface. The two functions do the exact same thing, so this is just a cosmetic change. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-