1. 23 5月, 2011 1 次提交
    • P
      apm-emulation: apm_mutex breaks ACK; remove it · fda5fe19
      Paul Parsons 提交于
      apm_mutex is locked by a process (e.g. apm -s) at the start of apm_ioctl() and
      remains locked while pm_suspend() is called. Any subsequent process trying to
      ACK the suspend (e.g. apmd) is then blocked at the start of apm_ioctl(),
      causing the suspend to be delayed for 5 seconds in apm_suspend_notifier()
      while the ACK times out. In short, ACKs don't work.
      
      The driver's data structures are sufficiently protected by assorted locks. And
      pm_suspend() has its own mutex to prevent reentrancy. Consequently there is no
      obvious requirement for apm_mutex, which evolved from earlier BKL calls. So
      let's remove it.
      Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
      Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
      Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      fda5fe19
  2. 18 10月, 2010 1 次提交
  3. 15 10月, 2010 1 次提交
    • A
      llseek: automatically add .llseek fop · 6038f373
      Arnd Bergmann 提交于
      All file_operations should get a .llseek operation so we can make
      nonseekable_open the default for future file operations without a
      .llseek pointer.
      
      The three cases that we can automatically detect are no_llseek, seq_lseek
      and default_llseek. For cases where we can we can automatically prove that
      the file offset is always ignored, we use noop_llseek, which maintains
      the current behavior of not returning an error from a seek.
      
      New drivers should normally not use noop_llseek but instead use no_llseek
      and call nonseekable_open at open time.  Existing drivers can be converted
      to do the same when the maintainer knows for certain that no user code
      relies on calling seek on the device file.
      
      The generated code is often incorrectly indented and right now contains
      comments that clarify for each added line why a specific variant was
      chosen. In the version that gets submitted upstream, the comments will
      be gone and I will manually fix the indentation, because there does not
      seem to be a way to do that using coccinelle.
      
      Some amount of new code is currently sitting in linux-next that should get
      the same modifications, which I will do at the end of the merge window.
      
      Many thanks to Julia Lawall for helping me learn to write a semantic
      patch that does all this.
      
      ===== begin semantic patch =====
      // This adds an llseek= method to all file operations,
      // as a preparation for making no_llseek the default.
      //
      // The rules are
      // - use no_llseek explicitly if we do nonseekable_open
      // - use seq_lseek for sequential files
      // - use default_llseek if we know we access f_pos
      // - use noop_llseek if we know we don't access f_pos,
      //   but we still want to allow users to call lseek
      //
      @ open1 exists @
      identifier nested_open;
      @@
      nested_open(...)
      {
      <+...
      nonseekable_open(...)
      ...+>
      }
      
      @ open exists@
      identifier open_f;
      identifier i, f;
      identifier open1.nested_open;
      @@
      int open_f(struct inode *i, struct file *f)
      {
      <+...
      (
      nonseekable_open(...)
      |
      nested_open(...)
      )
      ...+>
      }
      
      @ read disable optional_qualifier exists @
      identifier read_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      expression E;
      identifier func;
      @@
      ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
      {
      <+...
      (
         *off = E
      |
         *off += E
      |
         func(..., off, ...)
      |
         E = *off
      )
      ...+>
      }
      
      @ read_no_fpos disable optional_qualifier exists @
      identifier read_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      @@
      ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
      {
      ... when != off
      }
      
      @ write @
      identifier write_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      expression E;
      identifier func;
      @@
      ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
      {
      <+...
      (
        *off = E
      |
        *off += E
      |
        func(..., off, ...)
      |
        E = *off
      )
      ...+>
      }
      
      @ write_no_fpos @
      identifier write_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      @@
      ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
      {
      ... when != off
      }
      
      @ fops0 @
      identifier fops;
      @@
      struct file_operations fops = {
       ...
      };
      
      @ has_llseek depends on fops0 @
      identifier fops0.fops;
      identifier llseek_f;
      @@
      struct file_operations fops = {
      ...
       .llseek = llseek_f,
      ...
      };
      
      @ has_read depends on fops0 @
      identifier fops0.fops;
      identifier read_f;
      @@
      struct file_operations fops = {
      ...
       .read = read_f,
      ...
      };
      
      @ has_write depends on fops0 @
      identifier fops0.fops;
      identifier write_f;
      @@
      struct file_operations fops = {
      ...
       .write = write_f,
      ...
      };
      
      @ has_open depends on fops0 @
      identifier fops0.fops;
      identifier open_f;
      @@
      struct file_operations fops = {
      ...
       .open = open_f,
      ...
      };
      
      // use no_llseek if we call nonseekable_open
      ////////////////////////////////////////////
      @ nonseekable1 depends on !has_llseek && has_open @
      identifier fops0.fops;
      identifier nso ~= "nonseekable_open";
      @@
      struct file_operations fops = {
      ...  .open = nso, ...
      +.llseek = no_llseek, /* nonseekable */
      };
      
      @ nonseekable2 depends on !has_llseek @
      identifier fops0.fops;
      identifier open.open_f;
      @@
      struct file_operations fops = {
      ...  .open = open_f, ...
      +.llseek = no_llseek, /* open uses nonseekable */
      };
      
      // use seq_lseek for sequential files
      /////////////////////////////////////
      @ seq depends on !has_llseek @
      identifier fops0.fops;
      identifier sr ~= "seq_read";
      @@
      struct file_operations fops = {
      ...  .read = sr, ...
      +.llseek = seq_lseek, /* we have seq_read */
      };
      
      // use default_llseek if there is a readdir
      ///////////////////////////////////////////
      @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier readdir_e;
      @@
      // any other fop is used that changes pos
      struct file_operations fops = {
      ... .readdir = readdir_e, ...
      +.llseek = default_llseek, /* readdir is present */
      };
      
      // use default_llseek if at least one of read/write touches f_pos
      /////////////////////////////////////////////////////////////////
      @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier read.read_f;
      @@
      // read fops use offset
      struct file_operations fops = {
      ... .read = read_f, ...
      +.llseek = default_llseek, /* read accesses f_pos */
      };
      
      @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier write.write_f;
      @@
      // write fops use offset
      struct file_operations fops = {
      ... .write = write_f, ...
      +	.llseek = default_llseek, /* write accesses f_pos */
      };
      
      // Use noop_llseek if neither read nor write accesses f_pos
      ///////////////////////////////////////////////////////////
      
      @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier read_no_fpos.read_f;
      identifier write_no_fpos.write_f;
      @@
      // write fops use offset
      struct file_operations fops = {
      ...
       .write = write_f,
       .read = read_f,
      ...
      +.llseek = noop_llseek, /* read and write both use no f_pos */
      };
      
      @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier write_no_fpos.write_f;
      @@
      struct file_operations fops = {
      ... .write = write_f, ...
      +.llseek = noop_llseek, /* write uses no f_pos */
      };
      
      @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier read_no_fpos.read_f;
      @@
      struct file_operations fops = {
      ... .read = read_f, ...
      +.llseek = noop_llseek, /* read uses no f_pos */
      };
      
      @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      @@
      struct file_operations fops = {
      ...
      +.llseek = noop_llseek, /* no read or write fn */
      };
      ===== End semantic patch =====
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Cc: Julia Lawall <julia@diku.dk>
      Cc: Christoph Hellwig <hch@infradead.org>
      6038f373
  4. 05 10月, 2010 1 次提交
    • A
      drivers: autoconvert trivial BKL users to private mutex · 613655fa
      Arnd Bergmann 提交于
      All these files use the big kernel lock in a trivial
      way to serialize their private file operations,
      typically resulting from an earlier semi-automatic
      pushdown from VFS.
      
      None of these drivers appears to want to lock against
      other code, and they all use the BKL as the top-level
      lock in their file operations, meaning that there
      is no lock-order inversion problem.
      
      Consequently, we can remove the BKL completely,
      replacing it with a per-file mutex in every case.
      Using a scripted approach means we can avoid
      typos.
      
      These drivers do not seem to be under active
      maintainance from my brief investigation. Apologies
      to those maintainers that I have missed.
      
      file=$1
      name=$2
      if grep -q lock_kernel ${file} ; then
          if grep -q 'include.*linux.mutex.h' ${file} ; then
                  sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
          else
                  sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
          fi
          sed -i ${file} \
              -e "/^#include.*linux.mutex.h/,$ {
                      1,/^\(static\|int\|long\)/ {
                           /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
      
      } }"  \
          -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
          -e '/[      ]*cycle_kernel_lock();/d'
      else
          sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                      -e '/cycle_kernel_lock()/d'
      fi
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      613655fa
  5. 17 5月, 2010 1 次提交
  6. 02 10月, 2009 1 次提交
  7. 17 7月, 2008 1 次提交
  8. 21 6月, 2008 1 次提交
  9. 29 4月, 2008 1 次提交
  10. 21 11月, 2007 1 次提交
    • R
      Freezer: Fix APM emulation breakage · cb43c54c
      Rafael J. Wysocki 提交于
      The APM emulation is currently broken as a result of commit
      83144186
      "Freezer: make kernel threads nonfreezable by default"
      that removed the PF_NOFREEZE annotations from apm_ioctl() without adding
      the appropriate freezer hooks.  Fix it and remove the unnecessary variable flags
      from apm_ioctl().
      
      Special thanks to Franck Bui-Huu <vagabon.xyz@gmail.com> for pointing out the
      problem.
      Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      Cc: Pavel Machek <pavel@ucw.cz>
      Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
      Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      cb43c54c
  11. 19 10月, 2007 1 次提交
    • R
      PM: Move definition of struct pm_ops to suspend.h · 95d9ffbe
      Rafael J. Wysocki 提交于
      Move the definition of 'struct pm_ops' and related functions from <linux/pm.h>
      to <linux/suspend.h> .
      
      There are, at least, the following reasons to do that:
      * 'struct pm_ops' is specifically related to suspend and not to the power
        management in general.
      * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it
        causes the entire kernel to be recompiled, which is unnecessary and annoying.
      * Some suspend-related features are already defined in <linux/suspend.h>, so it
        is logical to move the definition of 'struct pm_ops' into there.
      * 'struct hibernation_ops', being the hibernation-related counterpart of
        'struct pm_ops', is defined in <linux/suspend.h> .
      Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      Acked-by: NPavel Machek <pavel@ucw.cz>
      Cc: Len Brown <lenb@kernel.org>
      Cc: Greg KH <greg@kroah.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      95d9ffbe
  12. 18 7月, 2007 1 次提交
    • R
      Freezer: make kernel threads nonfreezable by default · 83144186
      Rafael J. Wysocki 提交于
      Currently, the freezer treats all tasks as freezable, except for the kernel
      threads that explicitly set the PF_NOFREEZE flag for themselves.  This
      approach is problematic, since it requires every kernel thread to either
      set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
      care for the freezing of tasks at all.
      
      It seems better to only require the kernel threads that want to or need to
      be frozen to use some freezer-related code and to remove any
      freezer-related code from the other (nonfreezable) kernel threads, which is
      done in this patch.
      
      The patch causes all kernel threads to be nonfreezable by default (ie.  to
      have PF_NOFREEZE set by default) and introduces the set_freezable()
      function that should be called by the freezable kernel threads in order to
      unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
      threads call set_freezable(), so it shouldn't cause any (intentional)
      change of behaviour to appear.  Additionally, it updates documentation to
      describe the freezing of tasks more accurately.
      
      [akpm@linux-foundation.org: build fixes]
      Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net>
      Cc: Pavel Machek <pavel@ucw.cz>
      Cc: Oleg Nesterov <oleg@tv-sign.ru>
      Cc: Gautham R Shenoy <ego@in.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      83144186
  13. 10 2月, 2007 1 次提交
  14. 14 12月, 2006 1 次提交
    • R
      [PATCH] getting rid of all casts of k[cmz]alloc() calls · 5cbded58
      Robert P. J. Day 提交于
      Run this:
      
      	#!/bin/sh
      	for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
      	  echo "De-casting $f..."
      	  perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
      	done
      
      And then go through and reinstate those cases where code is casting pointers
      to non-pointers.
      
      And then drop a few hunks which conflicted with outstanding work.
      
      Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Jeff Dike <jdike@addtoit.com>
      Cc: Greg KH <greg@kroah.com>
      Cc: Jens Axboe <jens.axboe@oracle.com>
      Cc: Paul Fulghum <paulkf@microgate.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Cc: Karsten Keil <kkeil@suse.de>
      Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
      Cc: Jeff Garzik <jeff@garzik.org>
      Cc: James Bottomley <James.Bottomley@steeleye.com>
      Cc: Ian Kent <raven@themaw.net>
      Cc: Steven French <sfrench@us.ibm.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Neil Brown <neilb@cse.unsw.edu.au>
      Cc: Jaroslav Kysela <perex@suse.cz>
      Cc: Takashi Iwai <tiwai@suse.de>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      5cbded58
  15. 30 11月, 2006 3 次提交
  16. 28 9月, 2006 1 次提交
  17. 01 7月, 2006 1 次提交
  18. 22 3月, 2006 1 次提交
  19. 12 1月, 2006 1 次提交
  20. 06 1月, 2006 1 次提交
  21. 14 11月, 2005 1 次提交
  22. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds 提交于
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4