Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 12月, 2019 1 次提交
    • G
      alios: mm: Support kidled · fd952d8c
      由 Gavin Shan 提交于 
      This enables scanning pages in fixed interval to determine their access
frequency (hot/cold). The result is exported to user land on basis of
memory cgroup by "memory.idle_page_stats". The design is highlighted as
below:

   * A kernel thread is spawn when this feature is enabled by writing
     non-zero value to "/sys/kernel/mm/kidled/scan_period_in_seconds".
     The thread sequentially scans the nodes and their pages that have
     been chained up in LRU list.

   * For each page, its corresponding age information is stored in the
     page flags or array in node. The age represents the scanning intervals
     in which the page isn't accessed. Also, the page flag (PG_idle) is
     leveraged. The page's age is increased by one if the idle flag isn't
     cleared in two consective scans. Otherwise, the page's age is cleared out.
     Also, the page's age information is cleared when it's free'd so that
     the stale age information won't be fetched when it's allocated.

   * Initially, the flag is set, while the access bit in its PTE is cleared
     out by the thread. In next scanning period, its PTE access bit is
     synchronized with the page flag: clear the flag if access bit is set.
     The flag is kept otherwise. For unmapped pages, the flag is cleared
     when it's accessed.

   * Eventually, the page's aging information is updated to the unstable
     bucket of its corresponding memory cgroup, taking as statistics. The
     unstable bucket (statistics) is copied to stable bucket when all pages
     in all nodes are scanned for once. The stable bucket (statistics) is
     exported to user land through "memory.idle_page_stats".

TESTING
=======

   * cgroup1, unmapped pagecache

     # dd if=/dev/zero of=/ext4/test.data oflag=direct bs=1M count=128
     #
     # echo 1 > /sys/kernel/mm/kidled/use_hierarchy
     # echo 15 > /sys/kernel/mm/kidled/scan_period_in_seconds
     # mkdir -p /cgroup/memory
     # mount -tcgroup -o memory /cgroup/memory
     # echo 1 > /cgroup/memory/memory.use_hierarchy
     # mkdir -p /cgroup/memory/test
     # echo 1 > /cgroup/memory/test/memory.use_hierarchy
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # dd if=/ext4/test.data of=/dev/null bs=1M count=128
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfei
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfei
       cfei   0   0   0   134217728   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep cfei
       cfei   0   0   0   134217728   0   0   0   0

   * cgroup1, mapped pagecache

     # < create same file and memory cgroups as above >
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # < run program to mmap the whole created file and access the area >
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfei
       cfei   0   134217728   0   0   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep cfei
       cfei   0   134217728   0   0   0   0   0   0

   * cgroup1, mapped and locked pagecache

     # < create same file and memory cgroups as above >
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # < run program to mmap the whole created file and mlock the area >
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep cfui
       cfui   0   134217728   0   0   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep cfui
       cfui   0   134217728   0   0   0   0   0   0

   * cgroup1, anonymous and locked area

     # < create memory cgroups as above >
     #
     # echo $$ > /cgroup/memory/test/cgroup.procs
     # < run program to mmap anonymous area and mlock it >
     # < wait a few minutes >
     # cat /cgroup/memory/test/memory.idle_page_stats | grep csui
       csui   0   0   134217728   0   0   0   0   0
     # cat /cgroup/memory/memory.idle_page_stats | grep csui
       csui   0   0   134217728   0   0   0   0   0

   * Rerun above test cases in cgroup2 and the results are no exceptional.
     However, the cgroups are populated in different way as below:

     # mkdir -p /cgroup
     # mount -tcgroup2 none /cgroup
     # echo "+memory" > /cgroup/cgroup.subtree_control
     # mkdir -p /cgroup/test
Signed-off-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
      fd952d8c
  3. 31 8月, 2018 1 次提交
  5. 08 6月, 2018 1 次提交
    • M
      mm: restructure memfd code · 5d752600
      由 Mike Kravetz 提交于 
      With the addition of memfd hugetlbfs support, we now have the situation
where memfd depends on TMPFS -or- HUGETLBFS.  Previously, memfd was only
supported on tmpfs, so it made sense that the code resided in shmem.c.
In the current code, memfd is only functional if TMPFS is defined.  If
HUGETLFS is defined and TMPFS is not defined, then memfd functionality
will not be available for hugetlbfs.  This does not cause BUGs, just a
lack of potentially desired functionality.

Code is restructured in the following way:
- include/linux/memfd.h is a new file containing memfd specific
  definitions previously contained in shmem_fs.h.
- mm/memfd.c is a new file containing memfd specific code previously
  contained in shmem.c.
- memfd specific code is removed from shmem_fs.h and shmem.c.
- A new config option MEMFD_CREATE is added that is defined if TMPFS
  or HUGETLBFS is defined.

No functional changes are made to the code: restructuring only.

Link: http://lkml.kernel.org/r/20180415182119.4517-4-mike.kravetz@oracle.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: NKhalid Aziz <khalid.aziz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Marc-Andr Lureau <marcandre.lureau@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5d752600
  7. 06 4月, 2018 1 次提交
  9. 18 11月, 2017 1 次提交
  11. 16 11月, 2017 1 次提交
  13. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  15. 09 9月, 2017 2 次提交
  17. 21 6月, 2017 1 次提交
  19. 28 2月, 2017 1 次提交
  21. 25 2月, 2017 1 次提交
  23. 23 2月, 2017 1 次提交
    • T
      mm/swap: add cache for swap slots allocation · 67afa38e
      由 Tim Chen 提交于 
      We add per cpu caches for swap slots that can be allocated and freed
quickly without the need to touch the swap info lock.

Two separate caches are maintained for swap slots allocated and swap
slots returned.  This is to allow the swap slots to be returned to the
global pool in a batch so they will have a chance to be coaelesced with
other slots in a cluster.  We do not reuse the slots that are returned
right away, as it may increase fragmentation of the slots.

The swap allocation cache is protected by a mutex as we may sleep when
searching for empty slots in cache.  The swap free cache is protected by
a spin lock as we cannot sleep in the free path.

We refill the swap slots cache when we run out of slots, and we disable
the swap slots cache and drain the slots if the global number of slots
fall below a low watermark threshold.  We re-enable the cache agian when
the slots available are above a high watermark.

[ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access]
[tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h]
  Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com
Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Reviewed-by: NMichal Hocko <mhocko@suse.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      67afa38e
  25. 13 10月, 2016 1 次提交
    • L
      Disable the __builtin_return_address() warning globally after all · ef6000b4
      由 Linus Torvalds 提交于 
      This affectively reverts commit 377ccbb4 ("Makefile: Mute warning
for __builtin_return_address(>0) for tracing only") because it turns out
that it really isn't tracing only - it's all over the tree.

We already also had the warning disabled separately for mm/usercopy.c
(which this commit also removes), and it turns out that we will also
want to disable it for get_lock_parent_ip(), that is used for at least
TRACE_IRQFLAGS.  Which (when enabled) ends up being all over the tree.

Steven Rostedt had a patch that tried to limit it to just the config
options that actually triggered this, but quite frankly, the extra
complexity and abstraction just isn't worth it.  We have never actually
had a case where the warning is actually useful, so let's just disable
it globally and not worry about it.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ef6000b4
  27. 27 7月, 2016 2 次提交
  29. 21 5月, 2016 1 次提交
  31. 26 3月, 2016 1 次提交
    • A
      mm, kasan: SLAB support · 7ed2f9e6
      由 Alexander Potapenko 提交于 
      Add KASAN hooks to SLAB allocator.

This patch is based on the "mm: kasan: unified support for SLUB and SLAB
allocators" patch originally prepared by Dmitry Chernenkov.
Signed-off-by: NAlexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7ed2f9e6
  33. 23 3月, 2016 1 次提交
    • D
      kernel: add kcov code coverage · 5c9a8750
      由 Dmitry Vyukov 提交于 
      kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing).  Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system.  A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/).  However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.

kcov does not aim to collect as much coverage as possible.  It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g.  scheduler, locking).

Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes.  Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch).  I've
dropped the second mode for simplicity.

This patch adds the necessary support on kernel side.  The complimentary
compiler support was added in gcc revision 231296.

We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:

  https://github.com/google/syzkaller/wiki/Found-Bugs

We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation".  For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.

Why not gcov.  Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat.  A
typical coverage can be just a dozen of basic blocks (e.g.  an invalid
input).  In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M).  Cost of
kcov depends only on number of executed basic blocks/edges.  On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.

kcov exposes kernel PCs and control flow to user-space which is
insecure.  But debugfs should not be mapped as user accessible.

Based on a patch by Quentin Casasnovas.

[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: NDmitry Vyukov <dvyukov@google.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5c9a8750
  35. 18 3月, 2016 1 次提交
    • J
      mm/page_ref: add tracepoint to track down page reference manipulation · 95813b8f
      由 Joonsoo Kim 提交于 
      CMA allocation should be guaranteed to succeed by definition, but,
unfortunately, it would be failed sometimes.  It is hard to track down
the problem, because it is related to page reference manipulation and we
don't have any facility to analyze it.

This patch adds tracepoints to track down page reference manipulation.
With it, we can find exact reason of failure and can fix the problem.
Following is an example of tracepoint output.  (note: this example is
stale version that printing flags as the number.  Recent version will
print it as human readable string.)

<...>-9018  [004]    92.678375: page_ref_set:         pfn=0x17ac9 flags=0x0 count=1 mapcount=0 mapping=(nil) mt=4 val=1
<...>-9018  [004]    92.678378: kernel_stack:
 => get_page_from_freelist (ffffffff81176659)
 => __alloc_pages_nodemask (ffffffff81176d22)
 => alloc_pages_vma (ffffffff811bf675)
 => handle_mm_fault (ffffffff8119e693)
 => __do_page_fault (ffffffff810631ea)
 => trace_do_page_fault (ffffffff81063543)
 => do_async_page_fault (ffffffff8105c40a)
 => async_page_fault (ffffffff817581d8)
[snip]
<...>-9018  [004]    92.678379: page_ref_mod:         pfn=0x17ac9 flags=0x40048 count=2 mapcount=1 mapping=0xffff880015a78dc1 mt=4 val=1
[snip]
...
...
<...>-9131  [001]    93.174468: test_pages_isolated:  start_pfn=0x17800 end_pfn=0x17c00 fin_pfn=0x17ac9 ret=fail
[snip]
<...>-9018  [004]    93.174843: page_ref_mod_and_test: pfn=0x17ac9 flags=0x40068 count=0 mapcount=0 mapping=0xffff880015a78dc1 mt=4 val=-1 ret=1
 => release_pages (ffffffff8117c9e4)
 => free_pages_and_swap_cache (ffffffff811b0697)
 => tlb_flush_mmu_free (ffffffff81199616)
 => tlb_finish_mmu (ffffffff8119a62c)
 => exit_mmap (ffffffff811a53f7)
 => mmput (ffffffff81073f47)
 => do_exit (ffffffff810794e9)
 => do_group_exit (ffffffff81079def)
 => SyS_exit_group (ffffffff81079e74)
 => entry_SYSCALL_64_fastpath (ffffffff817560b6)

This output shows that problem comes from exit path.  In exit path, to
improve performance, pages are not freed immediately.  They are gathered
and processed by batch.  During this process, migration cannot be
possible and CMA allocation is failed.  This problem is hard to find
without this page reference tracepoint facility.

Enabling this feature bloat kernel text 30 KB in my configuration.

   text    data     bss     dec     hex filename
12127327        2243616 1507328 15878271         f2487f vmlinux_disabled
12157208        2258880 1507328 15923416         f2f8d8 vmlinux_enabled

Note that, due to header file dependency problem between mm.h and
tracepoint.h, this feature has to open code the static key functions for
tracepoints.  Proposed by Steven Rostedt in following link.

https://lkml.org/lkml/2015/12/9/699

[arnd@arndb.de: crypto/async_pq: use __free_page() instead of put_page()]
[iamjoonsoo.kim@lge.com: fix build failure for xtensa]
[akpm@linux-foundation.org: tweak Kconfig text, per Vlastimil]
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      95813b8f
  37. 16 3月, 2016 1 次提交
    • L
      mm/page_poison.c: enable PAGE_POISONING as a separate option · 8823b1db
      由 Laura Abbott 提交于 
      Page poisoning is currently set up as a feature if architectures don't
have architecture debug page_alloc to allow unmapping of pages.  It has
uses apart from that though.  Clearing of the pages on free provides an
increase in security as it helps to limit the risk of information leaks.
Allow page poisoning to be enabled as a separate option independent of
kernel_map pages since the two features do separate work.  Because of
how hiberanation is implemented, the checks on alloc cannot occur if
hibernation is enabled.  The runtime alloc checks can also be enabled
with an option when !HIBERNATION.

Credit to Grsecurity/PaX team for inspiring this work
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8823b1db
  39. 11 9月, 2015 1 次提交
    • V
      mm: introduce idle page tracking · 33c3fc71
      由 Vladimir Davydov 提交于 
      Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g.  by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced.  However,
this method has two serious shortcomings:

 - it does not count unmapped file pages
 - it affects the reclaimer logic

To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g.  by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.

The Young page flag is used to avoid interference with the memory
reclaimer.  A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.

Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Reviewed-by: NAndres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      33c3fc71
  41. 05 9月, 2015 1 次提交
  43. 17 8月, 2015 1 次提交
  45. 15 4月, 2015 2 次提交
    • V
      mm: move memtest under mm · 4a20799d
      由 Vladimir Murzin 提交于 
      Memtest is a simple feature which fills the memory with a given set of
patterns and validates memory contents, if bad memory regions is detected
it reserves them via memblock API.  Since memblock API is widely used by
other architectures this feature can be enabled outside of x86 world.

This patch set promotes memtest to live under generic mm umbrella and
enables memtest feature for arm/arm64.

It was reported that this patch set was useful for tracking down an issue
with some errant DMA on an arm64 platform.

This patch (of 6):

There is nothing platform dependent in the core memtest code, so other
platforms might benefit from this feature too.

[linux@roeck-us.net: MEMTEST depends on MEMBLOCK]
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4a20799d
    • S
      mm: cma: debugfs interface · 28b24c1f
      由 Sasha Levin 提交于 
      I've noticed that there is no interfaces exposed by CMA which would let me
fuzz what's going on in there.

This small patchset exposes some information out to userspace, plus adds
the ability to trigger allocation and freeing from userspace.

This patch (of 3):

Implement a simple debugfs interface to expose information about CMA areas
in the system.

Useful for testing/sanity checks for CMA since it was impossible to
previously retrieve this information in userspace.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      28b24c1f
  47. 18 2月, 2015 1 次提交
  49. 17 2月, 2015 1 次提交
    • M
      vfs: remove get_xip_mem · e748dcd0
      由 Matthew Wilcox 提交于 
      All callers of get_xip_mem() are now gone.  Remove checks for it,
initialisers of it, documentation of it and the only implementation of it.
 Also remove mm/filemap_xip.c as it is now empty.  Also remove
documentation of the long-gone get_xip_page().
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e748dcd0
  51. 14 2月, 2015 2 次提交
    • A
      mm: slub: add kernel address sanitizer support for slub allocator · 0316bec2
      由 Andrey Ryabinin 提交于 
      With this patch kasan will be able to catch bugs in memory allocated by
slub.  Initially all objects in newly allocated slab page, marked as
redzone.  Later, when allocation of slub object happens, requested by
caller number of bytes marked as accessible, and the rest of the object
(including slub's metadata) marked as redzone (inaccessible).

We also mark object as accessible if ksize was called for this object.
There is some places in kernel where ksize function is called to inquire
size of really allocated area.  Such callers could validly access whole
allocated memory, so it should be marked as accessible.

Code in slub.c and slab_common.c files could validly access to object's
metadata, so instrumentation for this files are disabled.
Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: NDmitry Chernenkov <dmitryc@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Signed-off-by: NAndrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0316bec2
    • A
      kasan: add kernel address sanitizer infrastructure · 0b24becc
      由 Andrey Ryabinin 提交于 
      Kernel Address sanitizer (KASan) is a dynamic memory error detector.  It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.

KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required.  v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.

This patch only adds infrastructure for kernel address sanitizer.  It's
not available for use yet.  The idea and some code was borrowed from [1].

Basic idea:

The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.

Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.

Here is function to translate address to corresponding shadow address:

     unsigned long kasan_mem_to_shadow(unsigned long addr)
     {
                return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
     }

where KASAN_SHADOW_SCALE_SHIFT = 3.

So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible.  Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).

To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.

These functions check whether memory region is valid to access or not by
checking corresponding shadow memory.  If access is not valid an error
printed.

Historical background of the address sanitizer from Dmitry Vyukov:

	"We've developed the set of tools, AddressSanitizer (Asan),
	ThreadSanitizer and MemorySanitizer, for user space. We actively use
	them for testing inside of Google (continuous testing, fuzzing,
	running prod services). To date the tools have found more than 10'000
	scary bugs in Chromium, Google internal codebase and various
	open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
	lots of others): [2] [3] [4].
	The tools are part of both gcc and clang compilers.

	We have not yet done massive testing under the Kernel AddressSanitizer
	(it's kind of chicken and egg problem, you need it to be upstream to
	start applying it extensively). To date it has found about 50 bugs.
	Bugs that we've found in upstream kernel are listed in [5].
	We've also found ~20 bugs in out internal version of the kernel. Also
	people from Samsung and Oracle have found some.

	[...]

	As others noted, the main feature of AddressSanitizer is its
	performance due to inline compiler instrumentation and simple linear
	shadow memory. User-space Asan has ~2x slowdown on computational
	programs and ~2x memory consumption increase. Taking into account that
	kernel usually consumes only small fraction of CPU and memory when
	running real user-space programs, I would expect that kernel Asan will
	have ~10-30% slowdown and similar memory consumption increase (when we
	finish all tuning).

	I agree that Asan can well replace kmemcheck. We have plans to start
	working on Kernel MemorySanitizer that finds uses of unitialized
	memory. Asan+Msan will provide feature-parity with kmemcheck. As
	others noted, Asan will unlikely replace debug slab and pagealloc that
	can be enabled at runtime. Asan uses compiler instrumentation, so even
	if it is disabled, it still incurs visible overheads.

	Asan technology is easily portable to other architectures. Compiler
	instrumentation is fully portable. Runtime has some arch-dependent
	parts like shadow mapping and atomic operation interception. They are
	relatively easy to port."

Comparison with other debugging features:
========================================

KMEMCHECK:

  - KASan can do almost everything that kmemcheck can.  KASan uses
    compile-time instrumentation, which makes it significantly faster than
    kmemcheck.  The only advantage of kmemcheck over KASan is detection of
    uninitialized memory reads.

    Some brief performance testing showed that kasan could be
    x500-x600 times faster than kmemcheck:

$ netperf -l 30
		MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
		Recv   Send    Send
		Socket Socket  Message  Elapsed
		Size   Size    Size     Time     Throughput
		bytes  bytes   bytes    secs.    10^6bits/sec

no debug:	87380  16384  16384    30.00    41624.72

kasan inline:	87380  16384  16384    30.00    12870.54

kasan outline:	87380  16384  16384    30.00    10586.39

kmemcheck: 	87380  16384  16384    30.03      20.23

  - Also kmemcheck couldn't work on several CPUs.  It always sets
    number of CPUs to 1.  KASan doesn't have such limitation.

DEBUG_PAGEALLOC:
	- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
	  granularity level, so it able to find more bugs.

SLUB_DEBUG (poisoning, redzones):
	- SLUB_DEBUG has lower overhead than KASan.

	- SLUB_DEBUG in most cases are not able to detect bad reads,
	  KASan able to detect both reads and writes.

	- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
	  bugs only on allocation/freeing of object. KASan catch
	  bugs right before it will happen, so we always know exact
	  place of first bad read/write.

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies

Based on work by Andrey Konovalov.
Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NAndrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0b24becc
  53. 11 2月, 2015 1 次提交
    • K
      mm: replace remap_file_pages() syscall with emulation · c8d78c18
      由 Kirill A. Shutemov 提交于 
      remap_file_pages(2) was invented to be able efficiently map parts of
huge file into limited 32-bit virtual address space such as in database
workloads.

Nonlinear mappings are pain to support and it seems there's no
legitimate use-cases nowadays since 64-bit systems are widely available.

Let's drop it and get rid of all these special-cased code.

The patch replaces the syscall with emulation which creates new VMA on
each remap_file_pages(), unless they it can be merged with an adjacent
one.

I didn't find *any* real code that uses remap_file_pages(2) to test
emulation impact on.  I've checked Debian code search and source of all
packages in ALT Linux.  No real users: libc wrappers, mentions in
strace, gdb, valgrind and this kind of stuff.

There are few basic tests in LTP for the syscall.  They work just fine
with emulation.

To test performance impact, I've written small test case which
demonstrate pretty much worst case scenario: map 4G shmfs file, write to
begin of every page pgoff of the page, remap pages in reverse order,
read every page.

The test creates 1 million of VMAs if emulation is in use, so I had to
set vm.max_map_count to 1100000 to avoid -ENOMEM.

Before:		23.3 ( +-  4.31% ) seconds
After:		43.9 ( +-  0.85% ) seconds
Slowdown:	1.88x

I believe we can live with that.

Test case:

        #define _GNU_SOURCE
        #include <assert.h>
        #include <stdlib.h>
        #include <stdio.h>
        #include <sys/mman.h>

        #define MB	(1024UL * 1024)
        #define SIZE	(4096 * MB)

        int main(int argc, char **argv)
        {
                unsigned long *p;
                long i, pass;

                for (pass = 0; pass < 10; pass++) {
                        p = mmap(NULL, SIZE, PROT_READ|PROT_WRITE,
                                        MAP_SHARED | MAP_ANONYMOUS, -1, 0);
                        if (p == MAP_FAILED) {
                                perror("mmap");
                                return -1;
                        }

                        for (i = 0; i < SIZE / 4096; i++)
                                p[i * 4096 / sizeof(*p)] = i;

                        for (i = 0; i < SIZE / 4096; i++) {
                                if (remap_file_pages(p + i * 4096 / sizeof(*p), 4096,
                                                0, (SIZE - 4096 * (i + 1)) >> 12, 0)) {
                                        perror("remap_file_pages");
                                        return -1;
                                }
                        }

                        for (i = SIZE / 4096 - 1; i >= 0; i--)
                                assert(p[i * 4096 / sizeof(*p)] == SIZE / 4096 - i - 1);

                        munmap(p, SIZE);
                }

                return 0;
        }

[akpm@linux-foundation.org: fix spello]
[sasha.levin@oracle.com: initialize populate before usage]
[sasha.levin@oracle.com: grab file ref to prevent race while mmaping]
Signed-off-by: N"Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Armin Rigo <arigo@tunes.org>
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c8d78c18
  55. 14 12月, 2014 2 次提交
    • J
      mm/page_owner: keep track of page owners · 48c96a36
      由 Joonsoo Kim 提交于 
      This is the page owner tracking code which is introduced so far ago.  It
is resident on Andrew's tree, though, nobody tried to upstream so it
remain as is.  Our company uses this feature actively to debug memory leak
or to find a memory hogger so I decide to upstream this feature.

This functionality help us to know who allocates the page.  When
allocating a page, we store some information about allocation in extra
memory.  Later, if we need to know status of all pages, we can get and
analyze it from this stored information.

In previous version of this feature, extra memory is statically defined in
struct page, but, in this version, extra memory is allocated outside of
struct page.  It enables us to turn on/off this feature at boottime
without considerable memory waste.

Although we already have tracepoint for tracing page allocation/free,
using it to analyze page owner is rather complex.  We need to enlarge the
trace buffer for preventing overlapping until userspace program launched.
And, launched program continually dump out the trace buffer for later
analysis and it would change system behaviour with more possibility rather
than just keeping it in memory, so bad for debug.

Moreover, we can use page_owner feature further for various purposes.  For
example, we can use it for fragmentation statistics implemented in this
patch.  And, I also plan to implement some CMA failure debugging feature
using this interface.

I'd like to give the credit for all developers contributed this feature,
but, it's not easy because I don't know exact history.  Sorry about that.
Below is people who has "Signed-off-by" in the patches in Andrew's tree.

Contributor:
Alexander Nyberg <alexn@dsv.su.se>
Mel Gorman <mgorman@suse.de>
Dave Hansen <dave@linux.vnet.ibm.com>
Minchan Kim <minchan@kernel.org>
Michal Nazarewicz <mina86@mina86.com>
Andrew Morton <akpm@linux-foundation.org>
Jungsoo Son <jungsoo.son@lge.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      48c96a36
    • J
      mm/page_ext: resurrect struct page extending code for debugging · eefa864b
      由 Joonsoo Kim 提交于 
      When we debug something, we'd like to insert some information to every
page.  For this purpose, we sometimes modify struct page itself.  But,
this has drawbacks.  First, it requires re-compile.  This makes us
hesitate to use the powerful debug feature so development process is
slowed down.  And, second, sometimes it is impossible to rebuild the
kernel due to third party module dependency.  At third, system behaviour
would be largely different after re-compile, because it changes size of
struct page greatly and this structure is accessed by every part of
kernel.  Keeping this as it is would be better to reproduce errornous
situation.

This feature is intended to overcome above mentioned problems.  This
feature allocates memory for extended data per page in certain place
rather than the struct page itself.  This memory can be accessed by the
accessor functions provided by this code.  During the boot process, it
checks whether allocation of huge chunk of memory is needed or not.  If
not, it avoids allocating memory at all.  With this advantage, we can
include this feature into the kernel in default and can avoid rebuild and
solve related problems.

Until now, memcg uses this technique.  But, now, memcg decides to embed
their variable to struct page itself and it's code to extend struct page
has been removed.  I'd like to use this code to develop debug feature, so
this patch resurrect it.

To help these things to work well, this patch introduces two callbacks for
clients.  One is the need callback which is mandatory if user wants to
avoid useless memory allocation at boot-time.  The other is optional, init
callback, which is used to do proper initialization after memory is
allocated.  Detailed explanation about purpose of these functions is in
code comment.  Please refer it.

Others are completely same with previous extension code in memcg.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eefa864b
  57. 11 12月, 2014 2 次提交
    • J
      mm: page_cgroup: rename file to mm/swap_cgroup.c · 5d1ea48b
      由 Johannes Weiner 提交于 
      Now that the external page_cgroup data structure and its lookup is gone,
the only code remaining in there is swap slot accounting.

Rename it and move the conditional compilation into mm/Makefile.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5d1ea48b
    • J
      mm: memcontrol: lockless page counters · 3e32cb2e
      由 Johannes Weiner 提交于 
      Memory is internally accounted in bytes, using spinlock-protected 64-bit
counters, even though the smallest accounting delta is a page.  The
counter interface is also convoluted and does too many things.

Introduce a new lockless word-sized page counter API, then change all
memory accounting over to it.  The translation from and to bytes then only
happens when interfacing with userspace.

The removed locking overhead is noticable when scaling beyond the per-cpu
charge caches - on a 4-socket machine with 144-threads, the following test
shows the performance differences of 288 memcgs concurrently running a
page fault benchmark:

vanilla:

   18631648.500498      task-clock (msec)         #  140.643 CPUs utilized            ( +-  0.33% )
         1,380,638      context-switches          #    0.074 K/sec                    ( +-  0.75% )
            24,390      cpu-migrations            #    0.001 K/sec                    ( +-  8.44% )
     1,843,305,768      page-faults               #    0.099 M/sec                    ( +-  0.00% )
50,134,994,088,218      cycles                    #    2.691 GHz                      ( +-  0.33% )
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
 8,049,712,224,651      instructions              #    0.16  insns per cycle          ( +-  0.04% )
 1,586,970,584,979      branches                  #   85.176 M/sec                    ( +-  0.05% )
     1,724,989,949      branch-misses             #    0.11% of all branches          ( +-  0.48% )

     132.474343877 seconds time elapsed                                          ( +-  0.21% )

lockless:

   12195979.037525      task-clock (msec)         #  133.480 CPUs utilized            ( +-  0.18% )
           832,850      context-switches          #    0.068 K/sec                    ( +-  0.54% )
            15,624      cpu-migrations            #    0.001 K/sec                    ( +- 10.17% )
     1,843,304,774      page-faults               #    0.151 M/sec                    ( +-  0.00% )
32,811,216,801,141      cycles                    #    2.690 GHz                      ( +-  0.18% )
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
 9,999,265,091,727      instructions              #    0.30  insns per cycle          ( +-  0.10% )
 2,076,759,325,203      branches                  #  170.282 M/sec                    ( +-  0.12% )
     1,656,917,214      branch-misses             #    0.08% of all branches          ( +-  0.55% )

      91.369330729 seconds time elapsed                                          ( +-  0.45% )

On top of improved scalability, this also gets rid of the icky long long
types in the very heart of memcg, which is great for 32 bit and also makes
the code a lot more readable.

Notable differences between the old and new API:

- res_counter_charge() and res_counter_charge_nofail() become
  page_counter_try_charge() and page_counter_charge() resp. to match
  the more common kernel naming scheme of try_do()/do()

- res_counter_uncharge_until() is only ever used to cancel a local
  counter and never to uncharge bigger segments of a hierarchy, so
  it's replaced by the simpler page_counter_cancel()

- res_counter_set_limit() is replaced by page_counter_limit(), which
  expects its callers to serialize against themselves

- res_counter_memparse_write_strategy() is replaced by
  page_counter_limit(), which rounds down to the nearest page size -
  rather than up.  This is more reasonable for explicitely requested
  hard upper limits.

- to keep charging light-weight, page_counter_try_charge() charges
  speculatively, only to roll back if the result exceeds the limit.
  Because of this, a failing bigger charge can temporarily lock out
  smaller charges that would otherwise succeed.  The error is bounded
  to the difference between the smallest and the biggest possible
  charge size, so for memcg, this means that a failing THP charge can
  send base page charges into reclaim upto 2MB (4MB) before the limit
  would have been reached.  This should be acceptable.

[akpm@linux-foundation.org: add includes for WARN_ON_ONCE and memparse]
[akpm@linux-foundation.org: add includes for WARN_ON_ONCE, memparse, strncmp, and PAGE_SIZE]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3e32cb2e
  59. 11 10月, 2014 1 次提交
  61. 10 10月, 2014 2 次提交
  63. 18 8月, 2014 1 次提交
    • J
      mm: Support compiling out madvise and fadvise · d3ac21ca
      由 Josh Triplett 提交于 
      Many embedded systems will not need these syscalls, and omitting them
saves space.  Add a new EXPERT config option CONFIG_ADVISE_SYSCALLS
(default y) to support compiling them out.

bloat-o-meter:
add/remove: 0/3 grow/shrink: 0/0 up/down: 0/-2250 (-2250)
function                                     old     new   delta
sys_fadvise64                                 57       -     -57
sys_fadvise64_64                             691       -    -691
sys_madvise                                 1502       -   -1502
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
      d3ac21ca
  65. 07 8月, 2014 1 次提交