Pull arm64 perf fix from Catalin Marinas:
 "Perf fix (user-mode PC recording)"

* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  perf: arm64: Record the user-mode PC in the call chain.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip,
and the corresponding change in arch/arm.
Signed-off-by: NJed Davis <jld@mozilla.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We need to pick up the definition of raw_smp_processor_id() from
asm/smp.h.  For the !SMP case, we need to supply a definition of
raw_smp_processor_id().

Because of the include dependencies we cannot use smp_call_func_t in
asm/smp.h, but we do need linux/thread_info.h
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull sparc fixes from David Miller:
 "Various sparc bug fixes, in particular:

  1) TSB hashes have to be flushed before TLB on sparc64, from Dave
     Kleikamp.

  2) LEON timer interrupts can get stuck, from Andreas Larsson.

  3) Sparc64 needs to handle lack of address-congruence devicetree
     property, from Bob Picco"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: tsb must be flushed before tlb
  sparc,leon: Convert to use devm_ioremap_resource
  sparc64 address-congruence property
  sparc32, leon: Enable interrupts before going idle to avoid getting stuck
  sparc32, leon: Remove separate "ticker" timer for SMP
  sparc: kernel: using strlcpy() instead of strcpy()
  arch: sparc: prom: looping issue, need additional length check in the outside looping
  sparc: remove inline marking of EXPORT_SYMBOL functions
  sparc: Switch to asm-generic/linkage.h

Pull parisc fixes from Helge Deller:
 "This contains a kernel segfault fix when reading /proc/kpageflags or
  /proc/kpagecount, two fixes for the serial port and PCI graphic card
  support on C8000 workstations and a fix to use unshadowed registers
  for flushing D- and I-caches."

* 'parisc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm
  parisc: provide pci_mmap_page_range() for parisc
  parisc: fix serial ports on C8000 workstation
  parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2)

Commit 106c992a ("mm/hugetlb: add more arch-defined huge_pte
functions") added an include of <asm-generic/hugetlb.h> to each
architecture's <asm/hugetlb.h> (except s390).  Unfortunately metag was
missed which resulted in build errors when hugetlbfs is enabled (see
below).

Add the include for metag too to fix the build errors:

  mm/hugetlb.c In function 'make_huge_pte':
  mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkwrite'
  mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkdirty'
  ...
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARM fixes from Russell King:
 "The larger changes this time are

   - "ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page"
     which fixes more data corruption problems with O_DIRECT

   - "ARM: 7759/1: decouple CPU offlining from reboot/shutdown" which
     gets us back to working shutdown/reboot on SMP platforms

   - "ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect"
     which fixes a shutdown regression found in v3.10 on Versatile
     Express platforms.

  The remainder are the quite small, maybe one or two line changes"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7759/1: decouple CPU offlining from reboot/shutdown
  ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean
  ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
  ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B
  ARM: 7753/1: map_init_section flushes incorrect pmd
  ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect

This fixes a race where a cpu may re-load a tlb from a stale tsb right
after it has been flushed by a remote function call.

I still see some instability when stressing the system with parallel
kernel builds while creating memory pressure by writing to
/proc/sys/vm/nr_hugepages, but this patch improves the stability
significantly.
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: NBob Picco <bob.picco@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 75096579 ("lib: devres: Introduce devm_ioremap_resource()")
introduced devm_ioremap_resource() and deprecated the use of
devm_request_and_ioremap().

While at it, also remove the error message as devm_ioremap_resource()
also prints similar error message.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
CC: sparclinux@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Machine Description (MD) property "address-congruence-offset" is
optional. According to the MD specification the value is assumed 0UL when
not present. This caused early boot failure on T5.
Signed-off-by: NBob Picco <bob.picco@oracle.com>
CC: sparclinux@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This enables interrupts for Leon before having the CPU enter power-down mode.

Commit 87fa05ae, "sparc: Use generic idle loop",
gets the CPU stuck on idle for Leon systems. On Leon, disabling interrupts and
powering down the processor will get the processor stuck waiting for an
interrupt that will never be reacted to.
Signed-off-by: NAndreas Larsson <andreas@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reduces the need from two timers to one timer.

Moreover, without this patch, when the "ticker" timer triggers timer_cs_read via
tick_periodic it reads the value of the usual timer it can get an wrapped timer
value without timer_cs_internal_counter having been updated leading to the clock
going backwards. This effectively hangs one cpu that gets stuck in
update_wall_time with an offset slightly smaller than 0xffffffffffffffff.
Signed-off-by: NAndreas Larsson <andreas@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'boot_command_line' and 'full_boot_str' has a fix length, 'cmdline_p' and
'boot_command' maybe larger than them. So use strlcpy() instead of strcpy()
to avoid memory overflow.
Signed-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When "cp >= barg_buf + BARG_LEN-2", it breaks internel looping 'while',
but outside loop 'for' still has effect, so "*cp++ = ' '" will continue
repeating which may cause memory overflow.

So need additional length check for it in the outside looping.

Also beautify the related code which found by "./scripts/checkpatch.pl"
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm

The comment at the start of pacache.S states that the base and index
registers used for fdc,fic, and pdc instructions should not use shadowed
registers. Although this is probably unnecessary for tmpalias flushes,
there is also no reason not to comply.
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Signed-off-by: NHelge Deller <deller@gmx.de>

pci_mmap_page_range() is needed for X11-server support on C8000 with ATI
FireGL card.

Signed-off-by Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NHelge Deller <deller@gmx.de>

The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NHelge Deller <deller@gmx.de>

Make sure that we really return -1 (instead of 0x00ff) as node id for
page frame numbers which are not physically available.

This finally fixes the kernel panic when running
cat /proc/kpageflags /proc/kpagecount.

Theoretically this patch now limits the number of physical memory ranges
to 127 instead of 254, but currently we have MAX_PHYSMEM_RANGES
hardcoded to 8 which is sufficient for all existing parisc machines.
Signed-off-by: NHelge Deller <deller@gmx.de>

Pull ia64 build fix from Tony Luck:
 "Fix ia64 build breakage by adding newly needed #include"

We're still debating the patch that caused the build breakage, but this
fix seems like a good idea regardless of how that ends up being handled.

* tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Fix include dependency in asm/irqflags.h

Pull SLAB fix from Pekka Enberg:
 "A slab regression fix by Sasha Levin"

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slab: prevent warnings when allocating with __GFP_NOWARN

Pull sound fixes from Takashi Iwai:
 "Only driver/device-specific small fixes that are pretty safe to apply:

   - USB-audio Android and Logitech webcam fixes
   - HD-audio MacBook Air 4,2 quirk
   - Complete Dell headset quirk entries that were introduced in 3.10"

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add models for Dell headset jacks
  ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310
  ALSA: hda - Fix pin configurations for MacBook Air 4,2
  ALSA: usb-audio: work around Android accessory firmware bug
  ALSA: hda - Headset mic support for three more machines

Pull media fixes from Mauro Carvalho Chehab:
 "Series of fixes for 3.10.  There are some usual driver fixes (mostly
  on s5p/exynos playform drivers), plus some fixes at V4L2 core"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (40 commits)
  [media] soc_camera: error dev remove and v4l2 call
  [media] sh_veu: fix the buffer size calculation
  [media] sh_veu: keep power supply until the m2m context is released
  [media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted
  [media] v4l2-ioctl: don't print the clips list
  [media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls
  [media] cx88: fix NULL pointer dereference
  [media] DocBook/media/v4l: update version number
  [media] exynos4-is: Remove "sysreg" clock handling
  [media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev
  [media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured
  [media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded
  [media] s5p-mfc: Add NULL check for allocated buffer
  [media] s5p-mfc: added missing end-of-lines in debug messages
  [media] s5p-mfc: v4l2 controls setup routine moved to initialization code
  [media] s5p-mfc: separate encoder parameters for h264 and mpeg4
  [media] s5p-mfc: Remove special clock usage in driver
  [media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function
  [media] v4l2: mem2mem: save irq flags correctly
  [media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support
  ...

Pull clock framework fixes from Mike Turquette:
 "Half of the fixes here are for Exynos5, fixing regressions in CPUfreq
  due to the common clock framework conversion as well as one fix which
  allows the platform to properly reboot again.

  One core framework fix patches up a memory leak, another fixes a build
  error for the SPEAr platform and finally a Tegra-specific fix allows
  PCIe to initialize properly on that platform again"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  ARM: tegra30: clocks: Fix pciex clock registration
  clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock
  clk: spear: fix build error for spear3xx
  clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properly
  clk: exynos5250: Add sclk_mpll to the parent list of mout_cpu clock
  clk: exynos5250: Update cpufreq related clocks for EXYNOS5250
  clk: remove notifier from list before freeing it

asm/kregs.h isn't always included first, so we need an explicit include.

[Fix build breakage introduced by f21afc25
 smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu().]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Add comments to machine_shutdown()/halt()/power_off()/restart() that
describe their purpose and/or requirements re: CPUs being active/not.

In machine_shutdown(), replace the call to smp_send_stop() with a call to
disable_nonboot_cpus(). This completely disables all but one CPU, thus
satisfying the requirement that only a single CPU be active for kexec.
Adjust Kconfig dependencies for this change.

In machine_halt()/power_off()/restart(), call smp_send_stop() directly,
rather than via machine_shutdown(); these functions don't need to
completely de-activate all CPUs using hotplug, but rather just quiesce
them.

Remove smp_kill_cpus(), and its call from smp_send_stop().
smp_kill_cpus() was indirectly calling smp_ops.cpu_kill() without calling
smp_ops.cpu_die() on the target CPUs first. At least some implementations
of smp_ops had issues with this; it caused cpu_kill() to hang on Tegra,
for example. Since smp_send_stop() is only used for shutdown, halt, and
power-off, there is no need to attempt any kind of CPU hotplug here.

Adjust Kconfig to reflect that machine_shutdown() (and hence kexec)
relies upon disable_nonboot_cpus(). However, this alone doesn't guarantee
that hotplug will work, or even that hotplug is implemented for a
particular piece of HW that a multi-platform zImage runs on. Hence, add
error-checking to machine_kexec() to determine whether it did work.
Suggested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NZhangfei Gao <zhangfei.gao@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make sure hyp-stub.S gets removed during make distclean,
this left over file was introduced in commit:

424e5994 ARM: zImage/virt: hyp mode entry support for the zImage loader
Signed-off-by: NMagnus Damm <damm@opensource.se>
Acked-by: NDave Martin <dave.martin@linaro.org>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit f8b63c18 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only.  However, for
example when doing direct I/O, pages with user space mappings may
occur.

Thus, continue to do lazy flushing if there are no user space
mappings.  Otherwise, flush the kernel cache lines directly.
Signed-off-by: NSimon Baatz <gmbnomis@gmail.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # 3.2+
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This commit fixes the ID and mask for the PJ4B which was too
restrictive and didn't match the CPU of the Armada 370 SoC.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This bug was introduced in commit e651eab0.
Some v4/v5 platforms failed to boot due to this.
Signed-off-by: NPo-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On Cortex-A9 before version r1p0, the LoUIS bit field of the CLIDR
register returns zero when it should return one. This leads to cache
maintenance operations which rely on this value to not function as
intended, causing data corruption.

The workaround for this errata is to detect affected CPUs and correct
the LoUIS value read.
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJon Medhurst <tixy@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

These headset jacks keep coming in on more and more platforms, and
it's possible I don't catch them all. Make it easier to test and
verify by making models.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just like the previous fix for LogitechHD Webcam c270 in commit
11e7064f, c310 model also requires the
same workaround for avoiding the kernel warning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

MacBook Air 4,2 requires the whole default pin configuration table to
be overridden by the driver, as usual, as Apple's machines don't set
up properly after boot.  Otherwise mic won't work, and other ill
effect may happen.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59381Reported-and-tested-by: NPeter John Hartman <peterjohnhartman@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the Android firmware enables the audio interfaces in accessory
mode, it always declares in the control interface's baInterfaceNr array
that interfaces 0 and 1 belong to the audio function.  However, the
accessory interface itself, if also enabled, already is at index 0 and
shifts the actual audio interface numbers to 1 and 2, which prevents the
PCM streaming interface from being seen by the host driver.

To get the PCM interface interface to work, detect when the descriptors
point to the (for this driver useless) accessory interface, and redirect
to the correct one.
Reported-by: NJeremy Rosen <jeremy.rosen@openwide.fr>
Tested-by: NJeremy Rosen <jeremy.rosen@openwide.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

They need these quirks to have headset mic support.

BugLink: https://bugs.launchpad.net/bugs/1189363Tested-by: NShawn Wang <shawn.wang@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Registering pciex as peripheral clock instead of fixed clock
as tegra_perih_reset_assert(deassert) api of this clock api
gives warning and ultimately does not succeed to assert(deassert)
Signed-off-by: NJay Agarwal <jagarwal@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

When you copy some code, you are supposed to read it.  If nothing else,
there's a chance to spot and fix an obvious bug instead of sharing it...

X-Song: "I Got It From Agnes", by Tom Lehrer
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
[ Tom Lehrer? You're dating yourself, Al ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>