The remote node context should only signal a device reset condition
in a suspended state.
Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Walk through the list of pending requests being careful to consider that
multiple requests can be terminated when the lock is dropped (i.e.
invalidating the 'next' reference established by
list_for_each_entry_safe).

Also noticed that all callers to isci_terminate_pending_requests()
specifying terminating, so just drop the parameter.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

In the situation where a termination of an I/O times-out,
make sure that the linkage from the request to the task
is severed completely.  Also make sure that the selection
of tasks to terminate occurs under scic_lock.
Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Requests that fail at start because of a reset pending condition
must be set to complete in order to allow for later cleanup.
Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

There are situations with slow expanders in which a first attempt
to execute an SMP request will fail with a timeout.  Immediate
subsequent retries will generally succeed.  This change makes sure
SMP I/O failures are immediately failed to libsas so that retries
happen with no discovery process timeout delay.
Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

When resetting a sata device in the domain we have seen occasions where
libsas prematurely marks a device gone in the time it takes for the
device to re-establish the link.  This plays badly with software raid
arrays.  Other libsas drivers have non-uniform delays in their reset
handlers to try to cover this condition, but not sufficient to close the
hole.  Given that a sata device can take many seconds to recover we
filter bcns and poll for the device reattach state before notifying
libsas that the port needs the domain to be rediscovered.  Once this has
been proven out at the lldd level we can think about uplevelling this
feature to a common implementation in libsas.
Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com>
[ use kzalloc instead of kmem_cache ]
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
[ use eventq and time macros ]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Delay after bringing up the RNC to allow for resumption latency.
Signed-off-by: NJeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The old 'core' had aspirations of running in severely memory constrained
environments like bios option-rom, it's not needed for Linux and gets in
the way of other cleanups (like unifying/reducing the number of structure
members in scic_sds_controller/isci_host).

This also fixes a theoretical bug in that the driver would blindly override
the silicon advertised limits for number of ports, task contexts, and remote
node contexts.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

C0 silicon updates the pci revision id and requires new AFE parameters
for phy signal integrity.  Support for previous silicon revisions is
deprecated (it's also broken for the theoretical case of multiple
controllers at different silicon revisions, all the more reason to get
it removed as soon as possible)
Signed-off-by: NAdam Gruchala <adam.gruchala@intel.com>
[fixed up deprecated silicon support]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Additional state machine cleanups:

 o Remove static functions sci_state_machine_exit_state() and
   sci_state_machine_enter_state()
 o Combines sci_base_state_machine_construct() and
   sci_base_state_machine_start() into a single function,
   sci_init_sm()
 o Remove sci_base_state_machine_stop() which is unused.
 o Kill state_machine.[ch]
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
[fixed too large to inline functions]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This cleans up several areas of the state machine mechanism:

 o Rename sci_base_state_machine_change_state to sci_change_state
 o Remove sci_base_state_machine_get_state function
 o Rename 'state_machine' struct member to 'sm' in client structs
 o Shorten the name of request states
 o Shorten state machine state names as follows:
        SCI_BASE_CONTROLLER_STATE_xxx to SCIC_xxx
        SCI_BASE_PHY_STATE_xxx to SCI_PHY_xxx
        SCIC_SDS_PHY_STARTING_SUBSTATE_xxx to SCI_PHY_SUB_xxx
        SCI_BASE_PORT_STATE_xxx to SCI_PORT_xxx and
        SCIC_SDS_PORT_READY_SUBSTATE_xxx to SCI_PORT_SUB_xxx
        SCI_BASE_REMOTE_DEVICE_STATE_xxx to SCI_DEV_xxx
        SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_STP_DEV_xxx
        SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_SMP_DEV_xxx
        SCIC_SDS_REMOTE_NODE_CONTEXT_xxx_STATE to SCI_RNC_xxx
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Newer gcc's are better at identifying "set, but not used" variables.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

We can call the EFI get_variable service routine directly to retrieve
the EFI variable that holds the OEM parameters table.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

It doesn't look like there is any reason to do a kmalloc. We can do the
byte swap in place and avoid the allocation. This allow us to remove
a kmalloc and a memcpy.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Delete code which is no longer used.
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Replace the timeout_timer in the isci_tmf with a call to
wait_for_completion_timeout
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Convert the sata_timeout_timer in the scic_sds_phy struct to
use a struct sci_timer
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
[squashed collateral cleanups]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Rather than preallocating a list of timers and doling them out at runtime,
embed a struct timerlist in each object that needs one.  A struct sci_timer
interface is introduced to manage the timer cancellation semantics which
currently need to guarantee the timer is cancelled while holding
spin_lock(ihost->scic_lock).  Since the timeout functions also need to acquire
the lock it currently prevents the driver from using del_timer_sync() for
runtime cancellations.

del_timer_sync() is used however before the objects go out of scope.
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Now that any given object type only has one state_machine we can use
container_of() to get back to the given state machine owner.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify rnc start{io|task} handlers and delete the state handler
infrastructure.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify rnc suspend/resume handlers and delete the state handlers.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify rnc destruct handlers and delete the state handler.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify rnc event handlers and delete the state handler.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify the handlers and kill the state handler infrastructure.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify the handlers and kill the state handler implementations.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unused infrastructure.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify the implementations and remove the state handlers.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The handler was never used.
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Implement the stop handlers directly in scic_sds_port_stop()
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

remove the handler from the port state handler table and implement the
logic directly in scic_sds_port_start().
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
[remove a level of indirection]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This conversion was complicated by the fact that the ready state exit routine
took unconditional action beyond just stopping the substate machine (like in
previous conversions).  In order to ensure identical behaviour every state
transition needs to be instrumented to catch ready-->!ready transitions and
execute scic_sds_port_invalidate_dummy_remote_node()
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
[fix ready state exit handling]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Name the table fields for consistancy and clarity.
Signed-off-by: NPiotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

While cleaning up the driver it is very tempting to convert scic_sds_get_*
macros to their open coded equivalent.  They are all just pointer dereferences
*except* scic_sds_phy_get_port() which returns NULL if the phy is assigned to
the dummy port.  Clarify this by renaming it to phy_get_non_dummy_port().
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify the implementations in scic_sds_phy_consume_power_handler(), and kill
the state handler plus infrastructure.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify the implementations in scic_sds_phy_event_handler(), and kill the state handler
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Unify the implementations in scic_sds_phy_frame_handler(), and kill the state handler
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>