this enables the workaround for compilers that generate warnings when
compiling libsubcmd.
Signed-off-by: NChris Phlipot <cphlipot0@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1467349955-1135-3-git-send-email-cphlipot0@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This enables the workaround for compilers that generate warnings when
compiling libapi.
Signed-off-by: NChris Phlipot <cphlipot0@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1467349955-1135-2-git-send-email-cphlipot0@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding a missing license descriptopn header to files in libbpf, make it
LGPL-2.1.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Leblond <eleblond@stamus-networks.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467630162-193121-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently we call unwind__prepare_access for map event.  In case we
report fork event the thread inherits its parent's maps and
unwind__prepare_access is never called for the thread.

This causes unwind__get_entries seeing uninitialized
unwind_libunwind_ops and thus returning no callchain.

Adding unwind__prepare_access calls for fork even processing.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding initialized arg into unwind__prepare_access to get feedback about
the initialization state.

It's not possible to get it from error code, because we return 0 even in
case we don't recognize dso, which is valid.

The 'initialized' value is used in following patch to speedup
unwind__prepare_access calls logic in fork path.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-4-git-send-email-jolsa@kernel.org
[ Remove ; after static inline function signatures, fixes build break ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

User's values from .perfconfig could overload the default callchain
setup and cause this test to fail.  Making sure the test is using
default callchain_param values.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Storing NUMA info within struct numa_node instead of strings. This way
it's usable in future patches.

Also it turned out it's slightly less code involved than using strings.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf buildid-cache --add <binary> scans given binary and add
the SDT events to probe cache. "sdt_" prefix is appended for
all SDT providers to avoid event-name clash with other pre-defined
events. It is possible to use the cached SDT events as other cached
events, via perf probe --add "sdt_<provider>:<event>=<event>".

e.g.
  ----
  # perf buildid-cache --add /lib/libc-2.17.so
  # perf probe --cache --list | head -n 5
  /usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392):
  sdt_libc:setjmp=setjmp
  sdt_libc:longjmp=longjmp
  sdt_libc:longjmp_target=longjmp_target
  sdt_libc:memory_heap_new=memory_heap_new
  # perf probe -x /usr/lib/libc-2.17.so \
    -a sdt_libc:memory_heap_new=memory_heap_new
  Added new event:
    sdt_libc:memory_heap_new (on memory_heap_new
   in /usr/lib/libc-2.17.so)

  You can now use it in all perf tools, such as:

          perf record -e sdt_libc:memory_heap_new -aR sleep 1

  # perf probe -l
    sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so)
  ----

Note that SDT event entries in probe-cache file is somewhat different
from normal cached events. Normal one starts with "#", but SDTs are
starting with "%".
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow user to set group name for adding new event.  Note that user must
ensure that the group name doesn't conflict with existing group name
carefully.

E.g. Existing group name can conflict with other events.  Especially,
using the group name reserved for kernel modules can hide kernel
embedded events when loading modules.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736024091.27797.9471545190066268995.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch serves the initial support to identify and list SDT events in
binaries.  When programs containing SDT markers are compiled, gcc with
the help of assembler directives identifies them and places them in the
section ".note.stapsdt".

To find these markers from the binaries, one needs to traverse through
this section and parse the relevant details like the name, type and
location of the marker. Also, the original location could be skewed due
to the effect of prelinking. If that is the case, the locations need to
be adjusted.

The functions in this patch open a given ELF, find out the SDT section,
parse the relevant details, adjust the location (if necessary) and
populate them in a list.

A typical note entry in ".note.stapsdt" section is as follows :

                                 |--nhdr.n_namesz--|
                ------------------------------------
                |      nhdr      |     "stapsdt"   |
        -----   |----------------------------------|
         |      |  <location>       <base_address> |
         |      |  <semaphore>                     |
nhdr.n_descsize |  "provider_name"   "note_name"   |
         |      |   <args>                         |
        -----   |----------------------------------|
                |      nhdr      |     "stapsdt"   |
                |...

The above shows an excerpt from the section ".note.stapsdt".  'nhdr' is
a structure which has the note name size (n_namesz), note description
size (n_desc_sz) and note type (n_type).

So, in order to parse the note note info, we need nhdr to tell us where
to start from.  As can be seen from <sys/sdt.h>, the name of the SDT
notes given is "stapsdt".  But this is not the identifier of the note.

After that, we go to description of the note to find out its location, the
address of the ".stapsdt.base" section and the semaphore address.
Then, we find the provider name and the SDT marker name and then follow the
arguments.
Signed-off-by: NHemant Kumar <hemant@linux.vnet.ibm.com>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736022628.27797.1201368329092908163.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That appeared after 0.140, and will be used in the SDT code, so, to
avoid bisection break on older systems, add a feature detection and
provide a stub with a pr_debug() to keep it building.

Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-80y0eldgweorqnwha9rvfxjr@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf probe --del' removes caches when '--cache' is given.  Note that
the delete pattern is not the same as for normal events.

If you cached probes with event name, --del "eventname" works as
expected. However, if you skipped it, the cached probes doesn't have
actual event name. In that case --del "probe-desc" is required (wildcard
is acceptable).  For example a cache entry has the probe-desc "vfs_read
$params", you can remove it with --del 'vfs_read*'.

  -----
  # perf probe --cache --list
  /[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
  vfs_read $params
  /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
  getaddrinfo $params

  # perf probe --cache --del vfs_read\*
  Removed cached event: probe:vfs_read

  # perf probe --cache --list
  /[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
  /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
  getaddrinfo $params
  -----
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736021651.27797.10250879847070772920.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf probe --list shows all cached probes when --cache is given. Each
caches are shown with on which binary that probed. E.g.:

  -----
  # perf probe --cache vfs_read \$params
  # perf probe --cache -x /lib64/libc-2.17.so getaddrinfo \$params
  # perf probe --cache --list
  [kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
  vfs_read $params
  /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
  getaddrinfo $params
  -----

Note that $params requires debuginfo.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736020674.27797.13488316780383460180.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before analyzing debuginfo, try to find a corresponding entry from probe
cache always. This does not depend on --cache, the --cache enables to
store/update cache, but looking up the cache is always enabled.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736019226.27797.16366402884098398857.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20160630' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Allow running 'perf test' entries in the same process, not forking to
   test each testcase, useful for debugging (Jiri Olsa)

 - Show number of samples in the stdio annotate header (Peter Zijlstra)

Documentation changes:

 - Add documentation for perf.data on disk format (Andi Kleen)

Build fixes:

 - Fix 'perf trace' build on old systems wrt missing SCHED_RESET_ON_FORK and
   eventfd.h (Arnaldo Carvalho de Melo)

Infrastructure changes:

 - Utility function to fetch arch from evsel/evlist (Ravi Bangoria)

Trivial changes:

 - Fix spelling mistake: "missmatch" -> "mismatch" in libbpf (Colin Ian King)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Display cpu map in standard list form.  (perf report -D output on perf stat data).

before:
  0x590 [0x18]: PERF_RECORD_CPU_MAP nr: 4 cpus: 0, 1, 2, 3

after:
  0x590 [0x18]: PERF_RECORD_CPU_MAP: 0-3

Adding automated testcase.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding -F/--dont-fork option to bypass forking for each test. It's
useful for debugging test.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NNilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-1-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I hit a bug when running test suite without forking each test (-F
option):

  $ perf test -Fv
  ...
  34: Test thread map                                          :
  --- start ---
  FAILED tests/thread-map.c:24 wrong comm
  ---- end ----
  Test thread map: FAILED!

The reason was the process name wasn't 'perf' as expected by the test,
because other tests set the name as well.

Setting it explicitly now.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NNilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I hit a bug when running test suite without forking
each test (-F option):

  $ perf test -F dso
   8: Test dso data read                                       : Ok
   9: Test dso data cache                                      : FAILED!
  10: Test dso data reopen                                     : FAILED!

The reason the session file limit is set just once for
perf process so we need to reset it for each test,
otherwise wrong limit is taken into account.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NNilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Old systems such as RHEL5 lack this file, and what we need is
already under ifdefs, so just ditch this #include.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dzbjfllw6znuoy37skwnwa4r@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

RHEL5 for instance doesn't have this one, help it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3adewnii78zi110eovfciopy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Staring at annotations of large functions is useless if there's only a
few samples in them. Report the number of samples in the header to make
this easier to determine.

Committer note:

The change amounts to:

  - Percent | Source code & Disassembly of perf-vdso.so for cycles:u
  ------------------------------------------------------------------
  + Percent | Source code & Disassembly of perf-vdso.so for cycles:u (3278 samples)
  +--------------------------------------------------------------------------------
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20160630082955.GA30921@twins.programming.kicks-ass.net
[ split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

No need to use strlen, etc to figure that out, just use the return from
printf(), it will tell how wide the following line needs to be.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20160630082955.GA30921@twins.programming.kicks-ass.net
[ split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add Utility function to fetch arch using evsel. (evsel->env->arch)
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1467267262-4589-2-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Trivial fix to spelling mistake
Signed-off-by: NColin King <colin.king@canonical.com>
Acked-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1467116617-8318-1-git-send-email-colin.king@canonical.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add some documentation for the on disk format of perf.data. This is not
documenting the actual perf events -- which are documented in
perf_event.h -- but just the additional headers that perf record adds
around them when writing the data to disk.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1466800885-12974-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20160628' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Generate comm, fork and exit events when converting perf.data files to CTF (Wang Nan)

Infrastructure changes:

 - Add libbabeltrace to build-test (Wang Nan)

 - 'perf record' prep work to support multiple evlists (Wang Nan)

 - Remove unused hist_entry__annotate function (Ravi Bangoria)

 - Add more toolchain triplets (Ravi Bangoria)

 - Update message for slang devel packages on Ubuntu (Neeraj Badlani)

 - Generalize handling of 'ret' instructions in the annotate TUI (Naveen N. Rao)

 - Use proper dso name for is_regular_file, fixing device file handling (Jiri Olsa)

Build Fixes:

 - Add missing config.h include, fixing the build with libbabeltrace (Jiri Olsa)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

If 'all' is selected, convert fork and exit events to output CTF stream.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-8-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

After this patch, 'perf data convert' convert comm events to output CTF
stream.

Result:

  # perf record -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.378 MB perf.data (73 samples)  ]

  # perf data convert --to-ctf ./out.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
  [ perf data convert: Converted and wrote 0.003 MB (73 samples) ]

  # babeltrace --clock-seconds ./out.ctf/
  [10627.402515791] (+?.?????????) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  [10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  ...    // only sample event is converted

  # perf data convert --all --to-ctf ./out.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
  [ perf data convert: Converted and wrote 0.023 MB (73 samples, 384 non-samples) ]

  # babeltrace --clock-seconds ./out.ctf/
  [  0.000000000] (+?.?????????) perf_comm: { cpu_id = 0 }, { pid = 1, tid = 1, comm = "init" }
  [  0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 2, tid = 2, comm = "kthreadd" }
  [  0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 3, tid = 3, comm = "ksoftirqd/0" }
  ...    // comm events are converted
  [10627.402515791] (+10627.402515791) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  [10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  ...    // samples are also converted
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-7-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If 'all' is selected, convert comm event to output CTF stream.

setup_non_sample_events() is called if non_sample is selected. It
creates a comm_class for comm event.

Use macros to generate and process_comm_event and add_comm_event. These
macros can be reused for other non-sample events.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-6-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commits are going to allow 'perf data convert' to collect not
only samples, but also non-sample events like comm and fork. In this
patch we count non-sample events using c.non_sample_count, and prepare
to print number of both type of events like:

  # ~/perf data convert --all --to-ctf ./out.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
  [ perf data convert: Converted and wrote 0.846 MB (6508 samples, 686 non-samples) ]
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-5-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If 'all' option is selected, 'perf data convert' should convert not only
samples, but non-sample events such as comm and fork. Add this option in
perf_data_convert_opts. Following commits will add cmdline option to
select it.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-4-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commits will add new option to 'perf data convert'. All options
should be grouped into a structure and passed to low level converter
(currently there's only one converter).

Introduce data-convert.h and define 'struct perf_data_convert_opts' in
it. Pass 'force' through opts.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There are many value_set_##x helper for integer, but only for integer.
This patch adds value_set_string() helper to help following commits
create string fields.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Marc reported use of uninitialized memory:

> In commit "40356721 perf symbols: Do not read symbols/data from
> device files" a check to uninitialzied memory was added. This leads to
> the following valgrind output:
>
>  ==24515== Syscall param stat(file_name) points to uninitialised byte(s)
>  ==24515==    at 0x75B26D5: _xstat (in /lib/x86_64-linux-gnu/libc-2.22.so)
>  ==24515==    by 0x4E548D: stat (stat.h:454)
>  ==24515==    by 0x4E548D: is_regular_file (util.c:687)
>  ==24515==    by 0x4A5BEE: dso__load (symbol.c:1435)
>  ==24515==    by 0x4BB1AE: map__load (map.c:289)
>  ==24515==    by 0x4BB1AE: map__find_symbol (map.c:333)
>  ==24515==    by 0x4835B3: thread__find_addr_location (event.c:1300)
>  ==24515==    by 0x4B5342: add_callchain_ip (machine.c:1652)
>  ==24515==    by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906)
>  ==24515==    by 0x4B9E7D: thread__resolve_callchain (machine.c:1958)
>  ==24515==    by 0x441B3E: process_event (builtin-script.c:795)
>  ==24515==    by 0x441B3E: process_sample_event (builtin-script.c:920)
>  ==24515==    by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192)
>  ==24515==    by 0x4BEE29: machines__deliver_event (session.c:1229)
>  ==24515==    by 0x4BF770: perf_session__deliver_event (session.c:1286)
>  ==24515==    by 0x4BF770: ordered_events__deliver_event (session.c:114)
>  ==24515==    by 0x4C1D17: __ordered_events__flush (ordered-events.c:207)
>  ==24515==    by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274)
>  ==24515==    by 0x4BF44C: perf_session__process_user_event (session.c:1325)
>  ==24515==    by 0x4BF44C: perf_session__process_event (session.c:1451)
>  ==24515==  Address 0x807c6a0 is 0 bytes inside a block of size 4,096 alloc'd
>  ==24515==    at 0x4C29C0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
>  ==24515==    by 0x4A5BCB: dso__load (symbol.c:1421)
>  ==24515==    by 0x4BB1AE: map__load (map.c:289)
>  ==24515==    by 0x4BB1AE: map__find_symbol (map.c:333)
>  ==24515==    by 0x4835B3: thread__find_addr_location (event.c:1300)
>  ==24515==    by 0x4B5342: add_callchain_ip (machine.c:1652)
>  ==24515==    by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906)
>  ==24515==    by 0x4B9E7D: thread__resolve_callchain (machine.c:1958)
>  ==24515==    by 0x441B3E: process_event (builtin-script.c:795)
>  ==24515==    by 0x441B3E: process_sample_event (builtin-script.c:920)
>  ==24515==    by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192)
>  ==24515==    by 0x4BEE29: machines__deliver_event (session.c:1229)
>  ==24515==    by 0x4BF770: perf_session__deliver_event (session.c:1286)
>  ==24515==    by 0x4BF770: ordered_events__deliver_event (session.c:114)
>  ==24515==    by 0x4C1D17: __ordered_events__flush (ordered-events.c:207)
>  ==24515==    by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274)
>  ==24515==    by 0x4BF44C: perf_session__process_user_event (session.c:1325)
>  ==24515==    by 0x4BF44C: perf_session__process_event (session.c:1451)
>  ==24515==    by 0x4C0EAC: __perf_session__process_events (session.c:1804)
>  ==24515==    by 0x4C0EAC: perf_session__process_events (session.c:1858)

The reason was a typo that passed global 'name' variable as the
is_regular_file argument instead dso->long_name.
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 40356721 ("perf symbols: Do not read symbols/data from device files")
Link: http://lkml.kernel.org/r/1466772025-17471-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commits introduce new evlists to record. This patch adjusts
record__pick_pc() and introduces perf_evlist__pick_pc() to read control
page from one specific evlist. record__pick_pc() will be improved to
search control page from multiple evlists.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467023052-146749-4-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commits introduce new evlists to record. This patch adjusts
record__mmap_read_all() and record__mmap_read(): converting original
record__mmap_read_all() to record__mmap_read_evlist(), read from one
evlist; makes record__mmap_read() reading from specific evlist.
record__mmap_read_all() will be improved to read from multiple evlists.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467023052-146749-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commits introduce multiple evlists to record. This patch
extracts perf_evlist__mmap_ex() processing to a new function, creates
record__mmap() and record__mmap_evlist() to wrap perf_evlist__mmap_ex()
and its error processing. They will be improvemented to create mmap for
all evlists.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467023052-146749-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Otherwise some compiler might scream:

  $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ LIBBABELTRACE=1
    BUILD:   Doing 'make -j4' parallel build
    CC       util/data-convert-bt.o
  util/data-convert-bt.c: In function ‘convert__config’:
  util/data-convert-bt.c:1299:19: error: implicit declaration of function ‘perf_config_u64’ [-Werror=implicit-function-declaration]
     c->queue_size = perf_config_u64(var, value);
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 41840d21 ("perf config: Move config declarations from util/cache.h to util/config.h")
Link: http://lkml.kernel.org/r/1466772025-17471-1-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'make build-test' doesn't test LIBBABELTRACE=1. It misses a building
failure caused by commit 41840d21 ("perf config: Move config
declarations from util/cache.h to util/config.h"), breaks bisect.

Add LIBBABELTRACE=1 to build-test.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466818918-131281-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>