This is a pre-requisite for a subsequent patch.

Read list XDR round-up needs to be done _before_ additional inline
content is copied to the end of the XDR buffer's page list. Move
the logic added by commit e560e3b5 ("svcrdma: Add zero padding
if the client doesn't send it").
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Currently the Linux server can not decode RDMA_NOMSG type requests.
Operations whose length exceeds the fixed size of RDMA SEND buffers,
like large NFSv4 CREATE(NF4LNK) operations, must be conveyed via
RDMA_NOMSG.

For an RDMA_MSG type request, the client sends the RPC/RDMA, RPC
headers, and some or all of the NFS arguments via RDMA SEND.

For an RDMA_NOMSG type request, the client sends just the RPC/RDMA
header via RDMA SEND. The request's read list contains elements for
the entire RPC message, including the RPC header.

NFSD expects the RPC/RMDA header and RPC header to be contiguous in
page zero of the XDR buffer. Add logic in the RDMA READ path to make
the read list contents land where the server prefers, when the
incoming message is a type RDMA_NOMSG message.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

An RPC/RDMA client may send large RPC arguments via a read
list. This is a list of scatter/gather elements which convey
RPC call arguments too large to fit in a small RDMA SEND.

Each entry in the read list has a "position" field, whose value is
the byte offset in the XDR stream where the data in that entry is to
be inserted. Entries which share the same "position" value make up
the same RPC argument. The receiver inserts entries with the same
position field value in list order into the XDR stream.

Currently the Linux NFS/RDMA server cannot handle receiving read
chunks in more than one position, mostly because no current client
sends read lists with elements in more than one position. As a
sanity check, ensure that all received chunks have the same
"rc_position."
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The RDMA reader function doesn't change once an svcxprt_rdma is
instantiated. Instead of checking sc_devcap during every incoming
RPC, set the reader function once when the connection is accepted.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Current convention is to avoid using BUG_ON() in places where an
oops could cause complete system failure.

Replace BUG_ON() call sites in svcrdma with an assertion error
message and allow execution to continue safely.

Some BUG_ON() calls are removed because they have never fired in
production (that we are aware of).

Some WARN_ON() calls are also replaced where a back trace is not
helpful; e.g., in a workqueue task.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The byte_count argument is not used, and the function is called
only from one place.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Nit: Fix inconsistent white space in dprintk messages.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

See RFC 5666 section 3.7: clients don't have to send zero XDR
padding.

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=246Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Fencing forces the invalidate to only happen after all prior send
work requests have been completed.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Reported by : Devesh Sharma <Devesh.Sharma@Emulex.Com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This patch refactors the NFSRDMA server marshalling logic to
remove the intermediary map structures.  It also fixes an existing bug
where the NFSRDMA server was not minding the device fast register page
list length limitations.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>

The server regression was caused by the addition of rq_next_page
(afc59400). There were a few places that
were missed with the update of the rq_respages array.
Signed-off-by: NTom Tucker <tom@ogc.us>
Tested-by: NSteve Wise <swise@ogc.us>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

It may be a matter of personal taste, but I find this makes the code
clearer.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The svcrdma transport was un-marshalling requests in-place. This resulted
in sparse warnings due to __beXX data containing both NBO and HBO data.

The code has been restructured to do byte-swapping as the header is
parsed instead of when the header is validated immediately after receipt.

Also moved extern declarations for the workqueue and memory pools to the
private header file.
Signed-off-by: NTom Tucker <tom@ogc.us>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

There are several error paths in the code that do not unmap DMA. This
patch adds calls to svc_rdma_unmap_dma to free these DMA contexts.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

There was logic in the send path that assumed that a page containing data
to send to the client has a KVA. This is not always the case and can result
in data corruption when page_address returns zero and we end up DMA mapping
zero.

This patch changes the bus mapping logic to avoid page_address() where
necessary and converts all calls from ib_dma_map_single to ib_dma_map_page
in order to keep the map/unmap calls symmetric.
Signed-off-by: NTom Tucker <tom@ogc.us>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

svc_xprt_received must be called when ->xpo_recvfrom has finished
receiving a message, so that the XPT_BUSY flag will be cleared and
if necessary, requeued for further work.

This call is currently made in each ->xpo_recvfrom function, often
from multiple different points.  In each case it is the earliest point
on a particular path where it is known that the protection provided by
XPT_BUSY is no longer needed.

However there are (still) some error paths which do not call
svc_xprt_received, and requiring each ->xpo_recvfrom to make the call
does not encourage robustness.

So: move the svc_xprt_received call to be made just after the
call to ->xpo_recvfrom(), and move it of the various ->xpo_recvfrom
methods.

This means that it may not be called at the earliest possible instant,
but this is unlikely to be a measurable performance issue.

Note that there are still other calls to svc_xprt_received as it is
also needed when an xprt is newly created.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Not including net/atm/

Compiled tested x86 allyesconfig only
Added a > 80 column line or two, which I ignored.
Existing checkpatch plaints willfully, cheerfully ignored.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the check on ch_count fails the cleanup path is skipped and the
previously allocated memory 'rpl_map', 'chl_map' is not freed.

Reported by Coverity.
Signed-off-by: NChristian Engelmayer <christian.engelmayer@frequentis.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The nfs server rdma transport was mapping rdma read target pages for
TO_DEVICE instead of FROM_DEVICE.  This causes data corruption on non
cache-coherent systems if frmrs are used.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RPCRDMA requests that specify a read-list are fetched with RDMA_READ. Using
an FRMR to map the data sink improves NFSRDMA security on transports that
place the RDMA_READ data sink LKEY on the wire because the valid lifetime
of the MR is only the duration of the RDMA_READ. The LKEY is invalidated
when the last RDMA_READ WR completes.

Mapping the data sink also allows for very large amounts to data to be
fetched with a single WR, so if the client is also using FRMR, the entire
RPC read-list can be fetched with a single WR.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

RDMA_READ completions are kept on a separate queue from the general
I/O request queue. Since a separate lock is used to protect the RDMA_READ
completion queue, a race exists between the dto_tasklet and the
svc_rdma_recvfrom thread where the dto_tasklet sets the XPT_DATA
bit and adds I/O to the read-completion queue. Concurrently, the
recvfrom thread checks the generic queue, finds it empty and resets
the XPT_DATA bit. A subsequent svc_xprt_enqueue will fail to enqueue
the transport for I/O and cause the transport to "stall".

The fix is to protect both lists with the same lock and set the XPT_DATA
bit with this lock held.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Add a dma map count in order to verify that all DMA mapping resources
have been freed when the transport is closed.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

Modify the RDMA_READ processing to use the reply and chunk list mapping data
types. Also add a special purpose 'hdr_count' field in in the context to hold
the header page count instead of overloading the SGE length field and
corrupting the DMA map length.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

A RDMA read-list cannot contain more elements than RPCSVC_MAXPAGES or
it will overflow the DTO context. Verify this when processing the
protocol header.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

The svc_rdma_send_error function is called when an RPCRDMA protocol
error is detected. This function attempts to post an error reply message.
Since an error posting to a transport in error is ignored, change
the return type to void.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

The rdma_read_complete function needs to copy the rqstp transport address
from the transport. Failure to do so can result in using the wrong
authentication method for the RPC or bug checking if the rqstp address
is not valid.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

An NFS_WRITE requires a set of RDMA_READ requests to fetch the write
data from the client. There are two principal pieces of data that
need to be tracked: the list of pages that comprise the completed RPC
and the SGE of dma mapped pages to refer to this list of pages. Previously
this whole bit was managed as a linked list of contexts with the
context containing the page list buried in this list. This patch
simplifies this processing by not keeping a linked list, but rather only
a pionter from the last submitted RDMA_READ's context to the context
that maps the set of pages that describe the RPC.  This significantly
simplifies this code path. SGE contexts are cleaned up inline in the DTO
path instead of at read completion time.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

The RDMACTXT_F_READ_DONE bit is not longer used. Remove it.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

The rdma_read_xdr function did not discriminate between no read-list and
an error posting the read-list. This results in a leak of a page if there
is an error posting the read-list.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

The svcrdma transport provider currently allocates receive buffers
to the RQ through the xpo_release_rqst method. This approach is overly
complicated since it means that the rqstp rq_xprt_ctxt has to be
selectively set based on whether the RPC is going to be processed
immediately or deferred. Instead, just post the receive buffer when
we are certain that we are replying in the send_reply function.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>

The RDMACTXT_F_LAST_CTXT bit was getting set incorrectly
when the last chunk in the read-list spanned multiple pages. This
resulted in a kernel panic when the wrong context was used to
build the RPC iovec page list.

RDMA_READ is used to fetch RPC data from the client for
NFS_WRITE requests. A scatter-gather is used to map the
advertised client side buffer to the server-side iovec and
associated page list.

WR contexts are used to convey which scatter-gather entries are
handled by each WR. When the write data is large, a single RPC may
require multiple RDMA_READ requests so the contexts for a single RPC
are chained together in a linked list. The last context in this list
is marked with a bit RDMACTXT_F_LAST_CTXT so that when this WR completes,
the CQ handler code can enqueue the RPC for processing.

The code in rdma_read_xdr was setting this bit on the last two
contexts on this list when the last read-list chunk spanned multiple
pages. This caused the svc_rdma_recvfrom logic to incorrectly build
the RPC and caused the kernel to crash because the second-to-last
context doesn't contain the iovec page list.

Modified the condition that sets this bit so that it correctly detects
the last context for the RPC.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Tested-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The iWARP protocol limits RDMA read requests to a single scatter
entry.  NFS/RDMA has code in rdma_read_max_sge() that is supposed to
limit the sge_count for RDMA read requests to 1, but the code to do
that is inside an #ifdef RDMA_TRANSPORT_IWARP block.  In the mainline
kernel at least, RDMA_TRANSPORT_IWARP is an enum and not a
preprocessor #define, so the #ifdef'ed code is never compiled.

In my test of a kernel build with -j8 on an NFS/RDMA mount, this
problem eventually leads to trouble starting with:

    svcrdma: Error posting send = -22
    svcrdma : RDMA_READ error = -22

and things go downhill from there.

The trivial fix is to delete the #ifdef guard.  The check seems to be
a remnant of when the NFS/RDMA code was not merged and needed to
compile against multiple kernel versions, although I don't think it
ever worked as intended.  In any case now that the code is upstream
there's no need to test whether the RDMA_TRANSPORT_IWARP constant is
defined or not.

Without this patch, my kernel build on an NFS/RDMA mount using NetEffect
adapters quickly and 100% reproducibly failed with an error like:

    ld: final link failed: Software caused connection abort

With the patch applied I was able to complete a kernel build on the
same setup.

(Tom Tucker says this is "actually an _ancient_ remnant when it had to
compile against iWARP vs. non-iWARP enabled OFA trees.")
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This file implements the RDMA transport recvfrom function. The function
dequeues work reqeust completion contexts from an I/O list that it shares
with the I/O tasklet in svc_rdma_transport.c. For ONCRPC RDMA, an RPC may
not be complete when it is received. Instead, the RDMA header that precedes
the RPC message informs the transport where to get the RPC data from on
the client and where to place it in the RPC message before it is delivered
to the server. The svc_rdma_recvfrom function therefore, parses this RDMA
header and issues any necessary RDMA operations to fetch the remainder of
the RPC from the client.

Special handling is required when the request involves an RDMA_READ.
In this case, recvfrom submits the RDMA_READ requests to the underlying
transport driver and then returns 0. When the transport
completes the last RDMA_READ for the request, it enqueues it on a
read completion queue and enqueues the transport. The recvfrom code
favors this queue over the regular DTO queue when satisfying reads.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>