Add saving full regs for function tracing on i386.
The saving of regs was influenced by patches sent out by
Masami Hiramatsu.

Link: Link: http://lkml.kernel.org/r/20120711195745.379060003@goodmis.orgReviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a way to have different functions calling different trampolines.
If a ftrace_ops wants regs saved on the return, then have only the
functions with ops registered to save regs. Functions registered by
other ops would not be affected, unless the functions overlap.

If one ftrace_ops registered functions A, B and C and another ops
registered fucntions to save regs on A, and D, then only functions
A and D would be saving regs. Function B and C would work as normal.
Although A is registered by both ops: normal and saves regs; this is fine
as saving the regs is needed to satisfy one of the ops that calls it
but the regs are ignored by the other ops function.

x86_64 implements the full regs saving, and i386 just passes a NULL
for regs to satisfy the ftrace_ops passing. Where an arch must supply
both regs and ftrace_ops parameters, even if regs is just NULL.

It is OK for an arch to pass NULL regs. All function trace users that
require regs passing must add the flag FTRACE_OPS_FL_SAVE_REGS when
registering the ftrace_ops. If the arch does not support saving regs
then the ftrace_ops will fail to register. The flag
FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED may be set that will prevent the
ftrace_ops from failing to register. In this case, the handler may
either check if regs is not NULL or check if ARCH_SUPPORTS_FTRACE_SAVE_REGS.
If the arch supports passing regs it will set this macro and pass regs
for ops that request them. All other archs will just pass NULL.

Link: Link: http://lkml.kernel.org/r/20120711195745.107705970@goodmis.org

Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

On boot up and module load, it is fine to modify the code directly,
without the use of breakpoints. This is because boot up modification
is done before SMP is initialized, thus the modification is serial,
and module load is done before the module executes.

But after that we must use a SMP safe method to modify running code.
Otherwise, if we are running the function tracer and update its
function (by starting off the stack tracer, or perf tracing)
the change of the function called by the ftrace trampoline is done
directly. If this is being executed on another CPU, that CPU may
take a GPF and crash the kernel.

The breakpoint method is used to change the nops at all the functions, but
the change of the ftrace callback handler itself was still using a
direct modification. If tracing was enabled and the function callback
was changed then another CPU could fault if it was currently calling
the original callback. This modification must use the breakpoint method
too.

Note, the direct method is still used for boot up and module load.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When the function tracer starts modifying the code via breakpoints
it sets a variable (modifying_ftrace_code) to inform the breakpoint
handler to call the ftrace int3 code.

But there's no synchronization between setting this code and the
handler, thus it is possible for the handler to be called on another
CPU before it sees the variable. This will cause a kernel crash as
the int3 handler will not know what to do with it.

I originally added smp_mb()'s to force the visibility of the variable
but H. Peter Anvin suggested that I just make it atomic.

[ Added comments as suggested by Peter Zijlstra ]
Suggested-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

To remove duplicate code, have the ftrace arch_ftrace_update_code()
use the generic ftrace_modify_all_code(). This requires that the
default ftrace_replace_code() becomes a weak function so that an
arch may override it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If CONFIG_KPROBES is not set, then linux/kprobes.h will not include
asm/kprobes.h needed by x86/ftrace.c for the BREAKPOINT macro.

The x86/ftrace.c file should just include asm/kprobes.h as it does not
need the rest of kprobes.
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As ftrace function tracing would require modifying code that could
be executed in NMI context, which is not stopped with stop_machine(),
ftrace had to do a complex algorithm with various stages of setup
and memory barriers to make it work.

With the new breakpoint method, this is no longer required. The changes
to the code can be done without any problem in NMI context, as well as
without stop machine altogether. Remove the complex code as it is
no longer needed.

Also, a lot of the notrace annotations could be removed from the
NMI code as it is now safe to trace them. With the exception of
do_nmi itself, which does some special work to handle running in
the debug stack. The breakpoint method can cause NMIs to double
nest the debug stack if it's not setup properly, and that is done
in do_nmi(), thus that function must not be traced.

(Note the arch sh may want to do the same)

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This method changes x86 to add a breakpoint to the mcount locations
instead of calling stop machine.

Now that iret can be handled by NMIs, we perform the following to
update code:

1) Add a breakpoint to all locations that will be modified

2) Sync all cores

3) Update all locations to be either a nop or call (except breakpoint
   op)

4) Sync all cores

5) Remove the breakpoint with the new code.

6) Sync all cores

[
  Added updates that Masami suggested:
   Use unlikely(modifying_ftrace_code) in int3 trap to keep kprobes efficient.
   Don't use NOTIFY_* in ftrace handler in int3 as it is not a notifier.
]

Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

 Due to commit dc326fca (x86, cpu: Clean up and unify the NOP selection infrastructure), we get the following warning:

arch/x86/kernel/ftrace.c: In function ‘ftrace_make_nop’:
arch/x86/kernel/ftrace.c:308:6: warning: assignment discards qualifiers from pointer target type
arch/x86/kernel/ftrace.c: In function ‘ftrace_make_call’:
arch/x86/kernel/ftrace.c:318:6: warning: assignment discards qualifiers from pointer target type

ftrace_nop_replace() now returns const unsigned char *, so change its associated function/variable to its compatible type to keep compiler clam.
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Link: http://lkml.kernel.org/r/1305221620.7986.4.camel@localhost.localdomain

[ updated for change of const void *src in probe_kernel_write() ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Clean up and unify the NOP selection infrastructure:

- Make the atomic 5-byte NOP a part of the selection system.
- Pick NOPs once during early boot and then be done with it.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/r/1303166160-10315-3-git-send-email-hpa@linux.intel.com

Currently the index to the ret_stack is updated and the real return address
is saved in the ret_stack. Then we call the trace function. The trace
function could decide that it doesn't want to trace this function
(ex. set_graph_function does not match) and it will return 0 which means
not to trace this call.

The normal function graph tracer has this code:

	if (!(trace->depth || ftrace_graph_addr(trace->func)) ||
	      ftrace_graph_ignore_irqs())
		return 0;

What this states is, if the trace depth (which is curr_ret_stack)
is zero (top of nested functions) then test if we want to trace this
function. If this function is not to be traced, then return  0 and
the rest of the function graph tracer logic will not trace this function.

The problem arises when an interrupt comes in after we updated the
curr_ret_stack. The next function that gets called will have a trace->depth
of 1. Which fools this trace code into thinking that we are in a nested
function, and that we should trace. This causes interrupts to be traced
when they should not be.

The solution is to trace the function first and then update the ret_stack.
Reported-by: Nzhiping zhong <xzhong86@163.com>
Reported-by: Nwu zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Go through x86 code and replace __get_cpu_var and get_cpu_var
instances that refer to a scalar and are not used for address
determinations.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

This patch is a logical extension of the protection provided by
CONFIG_DEBUG_RODATA to LKMs. The protection is provided by
splitting module_core and module_init into three logical parts
each and setting appropriate page access permissions for each
individual section:

 1. Code: RO+X
 2. RO data: RO+NX
 3. RW data: RW+NX

In order to achieve proper protection, layout_sections() have
been modified to align each of the three parts mentioned above
onto page boundary. Next, the corresponding page access
permissions are set right before successful exit from
load_module(). Further, free_module() and sys_init_module have
been modified to set module_core and module_init as RW+NX right
before calling module_free().

By default, the original section layout and access flags are
preserved. When compiled with CONFIG_DEBUG_SET_MODULE_RONX=y,
the patch will page-align each group of sections to ensure that
each page contains only one type of content and will enforce
RO/NX for each group of pages.

  -v1: Initial proof-of-concept patch.
  -v2: The patch have been re-written to reduce the number of #ifdefs
       and to make it architecture-agnostic. Code formatting has also
       been corrected.
  -v3: Opportunistic RO/NX protection is now unconditional. Section
       page-alignment is enabled when CONFIG_DEBUG_RODATA=y.
  -v4: Removed most macros and improved coding style.
  -v5: Changed page-alignment and RO/NX section size calculation
  -v6: Fixed comments. Restricted RO/NX enforcement to x86 only
  -v7: Introduced CONFIG_DEBUG_SET_MODULE_RONX, added
       calls to set_all_modules_text_rw() and set_all_modules_text_ro()
       in ftrace
  -v8: updated for compatibility with linux 2.6.33-rc5
  -v9: coding style fixes
 -v10: more coding style fixes
 -v11: minor adjustments for -tip
 -v12: minor adjustments for v2.6.35-rc2-tip
 -v13: minor adjustments for v2.6.37-rc1-tip
Signed-off-by: NSiarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: NXuxian Jiang <jiang@cs.ncsu.edu>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F914.9070106@free.fr>
[ minor cleanliness edits, -v14: build failure fix ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move Steve's code for finding the best 5-byte no-op from ftrace.c to
alternative.c. The idea is that other consumers (in this case jump label)
want to make use of that code.
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <96259ae74172dcac99c0020c249743c523a92e18.1284733808.git.jbaron@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The code in stop_machine that modifies the kernel text has a bit
of logic to handle the case of NMIs. stop_machine does not prevent
NMIs from executing, and if an NMI were to trigger on another CPU
as the modifying CPU is changing the NMI text, a GPF could result.

To prevent the GPF, the NMI calls ftrace_nmi_enter() which may
modify the code first, then any other NMIs will just change the
text to the same content which will do no harm. The code that
stop_machine called must wait for NMIs to finish while it changes
each location in the kernel. That code may also change the text
to what the NMI changed it to. The key is that the text will never
change content while another CPU is executing it.

To make the above work, the call to ftrace_nmi_enter() must also
do a smp_mb() as well as atomic_inc().  But for applications like
perf that require a high number of NMIs for profiling, this can have
a dramatic effect on the system. Not only is it doing a full memory
barrier on both nmi_enter() as well as nmi_exit() it is also
modifying a global variable with an atomic operation. This kills
performance on large SMP machines.

Since the memory barriers are only needed when ftrace is in the
process of modifying the text (which is seldom), this patch
adds a "modifying_code" variable that gets set before stop machine
is executed and cleared afterwards.

The NMIs will check this variable and store it in a per CPU
"save_modifying_code" variable that it will use to check if it
needs to do the memory barriers and atomic dec on NMI exit.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Most implementations of arch_syscall_addr() are the same, so create a
default version in common code and move the one piece that differs (the
syscall table) to asm/syscall.h.  New arch ports don't have to waste
time copying & pasting this simple function.

The s390/sparc versions need to be different, so document why.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1264498803-17278-1-git-send-email-vapier@gentoo.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

On x86_64, kernel text mappings are mapped read-only with
CONFIG_DEBUG_RODATA. So use the kernel identity mapping instead
of the kernel text mapping to modify the kernel text.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20091029024821.080941108@sbs-t61.sc.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Most of the syscalls metadata processing is done from arch.
But these operations are mostly generic accross archs. Especially now
that we have a common variable name that expresses the number of
syscalls supported by an arch: NR_syscalls, the only remaining bits
that need to reside in arch is the syscall nr to addr translation.

v2: Compare syscalls symbols only after the "sys" prefix so that we
    avoid spurious mismatches with archs that have syscalls wrappers,
    in which case syscalls symbols have "SyS" prefixed aliases.
    (Reported by: Heiko Carstens)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>

- Remove prefixes from pr_<level>, use pr_fmt(fmt).

No change in output.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <9b377eefae9e28c599dd4a17bdc81172965e9931.1254701151.git.joe@perches.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Convert the syscalls event tracing code to use NR_syscalls, instead of
FTRACE_SYSCALL_MAX. NR_syscalls is standard accross most arches, and
reduces code confusion/complexity.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Josh Stone <jistone@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anwin <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <9b4f1a84ecae57cc6599412772efa36f0d2b815b.1251146513.git.jbaron@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The current state of syscalls tracepoints generates only one event id
for every syscall events.

This patch associates an id with each syscall trace event, so that we
can identify each syscall trace event using the 'perf' tool.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Call arch_init_ftrace_syscalls at boot, so we can determine early the
set of syscalls for the syscall trace events.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add a new function to support translating a syscall name to number at
runtime.
This allows the syscall event tracer to map syscall names to number.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The function graph tracer used to have a protection against NMI
while entering a function entry tracing. But this is useless now,
this tracer is reentrant and the ring buffer supports the NMI tracing.
We can then drop this protection.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>

In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.

An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.

This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.

There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.

This test detected the problem and pointed out where the issue was.

This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.

Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After upgrading from gcc 4.2.2 to 4.4.0, the function graph tracer broke.
Investigating, I found that in the asm that replaces the return value,
gcc was using the same register for the old value as it was for the
new value.

	mov	(addr), old
	mov	new, (addr)

But if old and new are the same register, we clobber new with old!
I first thought this was a bug in gcc 4.4.0 and reported it:

  http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40132

Andrew Pinski responded (quickly), saying that it was correct gcc behavior
and the code needed to denote old as an "early clobber".

Instead of "=r"(old), we need "=&r"(old).

[Impact: keep function graph tracer from breaking with gcc 4.4.0 ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Impact: fix build warnings and possibe compat misbehavior on IA64

Building a kernel on ia64 might trigger these ugly build warnings:

CC      arch/ia64/ia32/sys_ia32.o
In file included from arch/ia64/ia32/sys_ia32.c:55:
arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined
In file included from include/linux/elf.h:7,
                 from include/linux/module.h:14,
                 from include/linux/ftrace.h:8,
                 from include/linux/syscalls.h:68,
                 from arch/ia64/ia32/sys_ia32.c:18:
arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition
[...]

sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h
to import the syscalls tracing prototypes.

But including ftrace.h can pull too much things for a low level file,
especially on ia64 where the ia32 private headers conflict with higher
level headers.

Now we isolate the syscall tracing headers in their own lightweight file.
Reported-by: NTony Luck <tony.luck@intel.com>
Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Michael Davidson <md@google.com>
LKML-Reference: <20090408184058.GB6017@nowhere>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove duplicated #include in arch/x86/kernel/ftrace.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
LKML-Reference: <1238503291-2532-1-git-send-email-weiyi.huang@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch move the timestamp from happening in the arch specific
code into the general code. This allows for better control by the tracer
to time manipulation.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

When I review the sensitive code ftrace_nmi_enter(), I found
the atomic variable nmi_running does protect NMI VS do_ftrace_mod_code(),
but it can not protects NMI(entered nmi) VS NMI(ftrace_nmi_enter()).

cpu#1                   | cpu#2                 | cpu#3
ftrace_nmi_enter()      | do_ftrace_mod_code()  |
  not modify            |                       |
------------------------|-----------------------|--
executing               | set mod_code_write = 1|
executing             --|-----------------------|--------------------
executing               |                       | ftrace_nmi_enter()
executing               |                       |    do modify
------------------------|-----------------------|-----------------
ftrace_nmi_exit()       |                       |

cpu#3 may be being modified the code which is still being executed on cpu#1,
it will have undefined results and possibly take a GPF, this patch
prevents it occurred.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49C0B411.30003@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Extend x86 architecture syscall tracing support with syscall
metadata table details.

(The upcoming core syscall tracing modifications rely on this.)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236955332-10133-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: decrease hangs risks with the graph tracer on slow systems

Since the function graph tracer can spend too much time on timer
interrupts, it's better now to use the more lightweight local
clock. Anyway, the function graph traces are more reliable on a
per cpu trace.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <49af243d.06e9300a.53ad.ffff840c@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix to prevent NMI lockup

If the page fault handler produces a WARN_ON in the modifying of
text, and the system is setup to have a high frequency of NMIs,
we can lock up the system on a failure to modify code.

The modifying of code with NMIs allows all NMIs to modify the code
if it is about to run. This prevents a modifier on one CPU from
modifying code running in NMI context on another CPU. The modifying
is done through stop_machine, so only NMIs must be considered.

But if the write causes the page fault handler to produce a warning,
the print can slow it down enough that as soon as it is done
it will take another NMI before going back to the process context.
The new NMI will perform the write again causing another print and
this will hang the box.

This patch turns off the writing as soon as a failure is detected
and does not wait for it to be turned off by the process context.
This will keep NMIs from getting stuck in this back and forth
of print outs.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: keep kernel text read only

Because dynamic ftrace converts the calls to mcount into and out of
nops at run time, we needed to always keep the kernel text writable.

But this defeats the point of CONFIG_DEBUG_RODATA. This patch converts
the kernel code to writable before ftrace modifies the text, and converts
it back to read only afterward.

The kernel text is converted to read/write, stop_machine is called to
modify the code, then the kernel text is converted back to read only.

The original version used SYSTEM_STATE to determine when it was OK
or not to change the code to rw or ro. Andrew Morton pointed out that
using SYSTEM_STATE is a bad idea since there is no guarantee to what
its state will actually be.

Instead, I moved the check into the set_kernel_text_* functions
themselves, and use a local variable to determine when it is
OK to change the kernel text RW permissions.

[ Update: Ingo Molnar suggested moving the prototypes to cacheflush.h ]
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

There is nothing really arch specific of the push and pop functions
used by the function graph tracer. This patch moves them to generic
code.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The constraint used for retrieving and restoring the parent function
pointer is incorrect. The parent variable is a pointer, and the
address of the pointer is modified by the asm statement and not
the pointer itself. It is incorrect to pass it in as an output
constraint since the asm will never update the pointer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix to prevent a kernel crash on fault

If for some reason the pointer to the parent function on the
stack takes a fault, the fix up code will not return back to
the original faulting code. This can lead to unpredictable
results and perhaps even a kernel panic.

A fault should not happen, but if it does, we should simply
disable the tracer, warn, and continue running the kernel.
It should not lead to a kernel crash.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The constraint used for retrieving and restoring the parent function
pointer is incorrect. The parent variable is a pointer, and the
address of the pointer is modified by the asm statement and not
the pointer itself. It is incorrect to pass it in as an output
constraint since the asm will never update the pointer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

When the function graph tracer picks a return address, it ensures this address
is really a kernel text one by calling __kernel_text_address()

Actually this path has never been taken.Its role was more likely to debug the tracer
on the beginning of its development but this function is wasteful since it is called
for every traced function.

The fault check is already sufficient.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

Now that a generic in_nmi is available, this patch removes the
special code in the ring_buffer and implements the in_nmi generic
version instead.

With this change, I was also able to rename the "arch_ftrace_nmi_enter"
back to "ftrace_nmi_enter" and remove the code from the ring buffer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>