[ Upstream commit 83ef4fb7556b6a673f755da670cbacab7e2c7f1b ]

Func jz4780_dma_desc_residue() expects the index to the next hw
descriptor as its last parameter. Caller func jz4780_dma_tx_status(),
however, applied modulus before passing it. When the current hw
descriptor was last in the list, the index passed became zero.

The resulting excess of reported residue especially caused problems
with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which
rely on this for determining current DMA location within buffer.

Combined with the recent and related residue-reporting fixes, spurious
ALSA audio underruns on jz4770 hardware are now fixed.
Signed-off-by: NDaniel Silsby <dansilsby@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Tested-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c558ecd21c852c97ff98dc6c61f715ba420ec251 ]

If we make this driver depend on MACH_JZ4780, that means it can be
enabled only if we're building a kernel specially crafted for a
JZ4780-based board, while most GNU/Linux distributions will want one
generic MIPS kernel that works on multiple boards.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0eae49582b4dee1a0e96007e1dea5122db98371a ]

The vbus rise & fall interrupts are used to enable and disable
U3 function of device automatically, this cause some issues when
class driver is initialized as deactivated, and will skip over
software-controlled connect by pullup(), but UDC wants to keep
disconnect until usb_gadget_activate() is called which calls
pullup() if needed. So we disable vbus rise & fall interrupts
and just use pullup() to enable & disable U3 function, and reset
mtu3 state when disconnect instead when vbus fall.
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 62623718fd31d08b26ebea6c8b40f24924153ab7 ]

S2MPS14 PMIC interrupt line on Exynos3250-based Artik5 evaluation board
has external pull-up resistors, so disable any pull control for it in
controller node. This fixes support for S2MPS14 PMIC interrupts and
enables operation of wakeup from S2MPS14 RTC alarm.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bcdb578a5f5b4aea79441606ab7f0a2e076b4474 ]

The pin is GPIO4-D1 not GPIO1-D1, see schematic, page 15 for reference.
Signed-off-by: NVicente Bergas <vicencb@gmail.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ca64b719a1e665ac7449b6a968059176af7365a8 ]

Replace all the memcpy() for copying name strings from the firmware with
strlcpy() to make sure we are bounded by the source buffer size and we
also always have NULL-terminated strings.

This is needed to avoid out of bounds accesses if the firmware returns
a non-terminated string.
Reported-by: NOlof Johansson <olof@lixom.net>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ff28915fd31ccafc0d38e6f84b66df280ed9e86a ]

include/trace/events/sched.h includes <linux/sched.h> (via
<linux/sched/numa_balancing.h>) and so knows about the TASK_* constants
used to interpret .prev_state. So instead of duplicating the magic
numbers make use of the defined macros to ease understanding the
mapping from state bits to letters which isn't completely intuitive for
an outsider.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/20180905093636.24068-1-u.kleine-koenig@pengutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7e6f4c5d600c1c8e2a1d900e65cab319d9b6782e ]

LLVM has a warning that tags expressions like:

	if (foo && non-bool-const)

This pattern triggers for CONFIG_SCHED_DEBUG=n where sched_feat() ends
up being whatever bit we select. Avoid the warning with an explicit
cast to bool.
Reported-by: NPhilipp Klocke <philipp97kl@gmail.com>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 09317da317e55e70ccbe23f65008348a4a1b7c7f ]

if failover_register failed, 'err' code should be set correctly

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5ce805869cbed93267ed26552ff76e30f05c91f7 ]

Sometimes, some merged IOs could get a chance to be submitted, resulting in
system hang in shutdown test. This issues IOs all the time after shutdown.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1ae00833e30c9b4af5cbfda65d75b1de12f74013 ]

This is needed to make the display and venc work properly.
Compare to omap3-beagle.dts.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fa99c21ecb3cd4021a60d0e8bf880e78b5bd0729 ]

Vendor defined U-Boot has changed the partition scheme a while ago:

* kernel partition 6MB
* file system partition uses the remainder up to end of the NAND
* increased size of the environment partition (to get an OneNAND compatible base address)
* shrink the U-Boot partition

Let's be compatible (e.g. Debian kernel built from upstream).
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7384a24248eda140a234d356b6c840701ee9f055 ]

we fix penirq polarity, add penirq pinmux and touchscreen
properties.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8905592b6e50cec905e6c6035bbd36201a3bfac1 ]

The omap dss susbystem takes the display aliases to find
out which displays exist. To enable tv-out we must define
an alias.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f6591391373dbff2c0200e1055d4ff86191578d2 ]

* fix connector compatibility (composite)
* add comment for gpio1 23
* add proper #address-cells
* we use only one venc_out channel for composite
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fa0d7dc355c890725b6178dab0cc11b194203afa ]

needed for device variants based on GTA04 board but with
different display panel (driver).
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f6707fd6241e483f6fea2caae82d876e422bb11a ]

Cache nodes under the cpu node(s) is PowerMac specific according to the
comment above, so make the code enforce that.
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 20bdc376b427cb420836f39ee8f281ea85dbaeef ]

Due to hardware errata, Ampere Computing eMAG SATA can't support
AHCI ALPM feature. This patch disables the AHCI ALPM feature for
eMAG SATA.
Signed-off-by: NSuman Trpathi <stripathi@amperecomputing.com>
Signed-off-by: NRameshwar Prasad Sahu <rameshwar.sahu@amperecomputing.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3b857472f34faa7d11001afa5e158833812c98d7 ]

Playback of 44.1Khz contents with HDMI plugged returns
"Invalid pipe config" because HDMI paths in the FW
topology are configured to operate at 48Khz.

This patch filters out sampling rates not supported
at hdac_hdmi_create_dais() to let user space SRC
to do the converting.
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fc269c0396448cabe1afd648c0b335669aa347b7 ]

Commit 4a75aae17b2a ("ASoC: dapm: Add support for multi-CODEC
CODEC to CODEC links") adds loops that iterate over multiple
CODECs in snd_soc_dai_link_event. This also introduced a compiler
warning for a potentially uninitialised variable in the case
no CODECs are present. This should never be the case as the
DAI link must by definition contain at least 1 CODEC however
probably best to avoid the compiler warning by initialising ret
to zero.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b085fbe2ef7fa7489903c45271ae7b7a52b0f9ab ]

Fix a crash during an attempt to mount a filesystem that has both
Unallocated Space Table and Unallocated Space Bitmap. Such filesystem
actually violates the UDF standard so we just have to properly detect
such situation and refuse to mount such filesystem read-write. When we
are at it, verify also other constraints on the allocation information
mandated by the standard.
Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c6e1241a82e6e74d1ae5cc34581dab2ffd6022d0 ]

if device_register return error, iounmap should be called, also iounmap
need to call before put_device.
Signed-off-by: NDing Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20476/
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c715a39541bb399eb03d728a996b224d90ce1336 ]

During register_device() init sequence is,
(a) register with rdma cgroup followed by
(b) register with sysfs

Therefore, unregister_device() sequence should follow the reverse order.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f9d08f1e1939ad4d92e38bd3dee6842512f5bee6 ]

While registering a mad agent, a user space can trigger various errors
and flood the logs.

Therefore, decrease verbosity and rate limit such error messages.
While we are at it, use __func__ to print function name.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 142a9c287613560edf5a03c8d142c8b6ebc1995b ]

It is illegal to change MTU to a value lower than the minimum MTU
stated in ethernet spec. In addition to that we need to add 4 bytes
for encapsulation header (IPOIB_ENCAP_LEN).

Before "ifconfig ib0 mtu 0" command, succeeds while it obviously shouldn't.
Signed-off-by: NMuhammad Sammar <muhammads@mellanox.com>
Reviewed-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6c75520f7e5a6a353f3b332509d205e213d05855 ]

mdev->state device state is not protected by the QP for which WRs are
being processed. Therefore, there is no need to hold spin lock while
checking mdev state.

Given that device fatal error is unlikely situation, wrap the condition
check with unlikely().

Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs
to be generated. Therefore, check for device fatal error before
processing QP1 work requests.

Fixes: 89ea94a7 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fc66b39fe36acfd06f716e338de7cd8f9550fad2 ]

DMA mode will always be used in i2c transactions, try to allocate
a DMA safe buffer if the buf of struct i2c_msg used is not DMA safe.
Signed-off-by: NJun Gao <jun.gao@mediatek.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 37f62c0d5822f631b786b29a1b1069ab714d1a28 ]

This is done in order not to trig the below warning in
ieee80211_rx_napi:

WARN_ON_ONCE(softirq_count() == 0);

ieee80211_rx_napi requires that softirq's are disabled during
execution.

The High latency bus drivers (SDIO and USB) sometimes call the wmi
ep_rx_complete callback from non softirq context, resulting in a trigger
of the above warning.

Calling ieee80211_rx_ni with softirq's already disabled (e.g., from
softirq context) should be safe as the local_bh_disable and
local_bh_enable functions (called from ieee80211_rx_ni) are fully
reentrant.
Signed-off-by: NErik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ef2ecab9af5feae97c47b7f61cdd96f7f49b2c23 ]

S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has
external pull-up resistors, so disable any pull control for it in
in controller node. This fixes support for S5M8767 interrupts and
enables operation of wakeup from S5M8767 RTC alarm.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 97c69a70dc2cecb2c3b96a66529e0082dabc2d2c ]

array "ctl_power_table" access index "pream" is initialized with -1 and
is raised as a static analysis tool issue.
[drivers\net\wireless\ath\ath10k\wmi.c:4719] ->
[drivers\net\wireless\ath\ath10k\wmi.c:4730]: (error) Array index -1 is
out of bounds.

Since the "pream" index for accessing ctl_power_table array is initialized
with -1, there is a chance of memory access violation for the cases below.
1) wmi_pdev_tpc_final_table_event change frequency is between 2483 and 5180
2) pream_idx is out of the enumeration ranges of wmi_tpc_pream_2ghz,
wmi_tpc_pream_5ghz
Signed-off-by: NK.T.VIJAYAKUMAAR <vijay.bvb@samsung.com>
[kvalo@codeaurora.org: clean up the warning message]
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9ab708aef61f5620113269a9d1bdb1543d1207d0 ]

In the case where lo_vag <= SGTL5000_LINE_OUT_GND_BASE, lo_vag
is set to zero and later vol_quot is computed by dividing by
lo_vag causing a division by zero error.  Fix this by avoiding
a zero division and set vol_quot to zero in this specific case
so that the lowest setting for i is correctly set.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 87ccbb1f943625884b824c5560f635dcea8e4510 ]

I don't see how the type - which is one of
RTM_{GETADDR,GETROUTE,GETNETCONF} - can change. So do the message type
calculation once before entering the for loop.
Signed-off-by: NChristian Brauner <christian@brauner.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fa8cd98c06407b5798b927cd7fd14d30f360ed02 ]

We need to bail out if lan78xx_get_endpoints() fails, otherwise the
result is overwritten.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NRaghuram Chary Jallipalli <raghuramchary.jallipalli@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0ded69f632bb717be9aeea3ae74e29050fcb060c ]

1. Create a file in an encrypted directory
2. Do GC & drop caches
3. Read stale data before its bio for metapage was not issued yet
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 014f5a250fc49fa8c6cd50093e725e71f3ae52da ]

Add validation check for wmm rule when copy rules from fwdb and print
error when rule is invalid.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 77cbbc35a49b75969d98edce9400beb21720aa39 ]

After masking the he_oper_params, to get the requested values as
integers one must rshift and not lshift.  Fix that by using the
le32_get_bits() macro.

Fixes: 41cbb0f5 ("mac80211: add support for HE")
Signed-off-by: NNaftali Goldstein <naftali.goldstein@intel.com>
[converted to use le32_get_bits()]
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7948a2b15873319d1bff4d37c09b9f2bf87b9021 ]

"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.

Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:

    spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
    spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0

This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).
Signed-off-by: NPeter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904202747.14968-1-peter@lekensteyn.nlSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c6a21c3864fc7f5febae7d096cd136f397c791f2 ]

In the current code, the TX affinity is per RoCE device, which can cause
unfairness between different contexts. e.g. if we open two contexts, and
each open 10 QPs concurrently, all of the QPs of the first context might
end up on the first port instead of distributed on the two ports as
expected

To overcome this unfairness between processes, we maintain per device TX
affinity, and per process TX affinity.

The allocation algorithm is as follow:

1. Hold two tx_port_affinity atomic variables, one per RoCE device and one
   per ucontext. Both initialized to 0.

2. In mlx5_ib_alloc_ucontext do:
 2.1. ucontext.tx_port_affinity = device.tx_port_affinity
 2.2. device.tx_port_affinity += 1

3. In modify QP INIT2RST:
 3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM
 3.2. ucontext.tx_port_affinity += 1
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ab0fb17c7d46406e1aac2dda265874751946626d ]

A recent commit removed the incorrect use of phys_to_dma from this
driver, but failed to remove the dma-direct.h include, so do that
now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ff8648f29fe58c2d94d32a076d2de7b92be4b485 ]

Newer versions of the IFC controller use a different method of initializing the
internal SRAM: Instead of reading from flash, a bit in the NAND configuration
register has to be set in order to trigger the self-initializing process.
Signed-off-by: NKurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>