- 03 6月, 2014 4 次提交
-
-
由 Aleksander Morgado 提交于
This interface is unusable, as the cdc-wdm character device doesn't reply to any QMI command. Also, the out-of-tree Sierra Wireless GobiNet driver fully skips it. Signed-off-by: NAleksander Morgado <aleksander@aleksander.es> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: NAleksander Morgado <aleksander@aleksander.es> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toshiaki Makita 提交于
br_handle_local_finish() is allowing us to insert an FDB entry with disallowed vlan. For example, when port 1 and 2 are communicating in vlan 10, and even if vlan 10 is disallowed on port 3, port 3 can interfere with their communication by spoofed src mac address with vlan id 10. Note: Even if it is judged that a frame should not be learned, it should not be dropped because it is destined for not forwarding layer but higher layer. See IEEE 802.1Q-2011 8.13.10. Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
Any process is able to send netlink messages with leftover bytes. Make the warning rate-limited to prevent too much log spam. The warning is supposed to help find userspace bugs, so print the triggering command name to implicate the buggy program. [v2: Use pr_warn_ratelimited instead of printk_ratelimited.] Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2014 3 次提交
-
-
由 Jon Maxwell 提交于
There has been a number incidents recently where customers running KVM have reported that VM hosts on different Hypervisors are unreachable. Based on pcap traces we found that the bridge was broadcasting the ARP request out onto the network. However some NICs have an inbuilt switch which on occasions were broadcasting the VMs ARP request back through the physical NIC on the Hypervisor. This resulted in the bridge changing ports and incorrectly learning that the VMs mac address was external. As a result the ARP reply was directed back onto the external network and VM never updated it's ARP cache. This patch will notify the bridge command, after a fdb has been updated to identify such port toggling. Signed-off-by: NJon Maxwell <jmaxwell37@gmail.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
Signed-off-by: NAleksander Morgado <aleksander@aleksander.es> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
After 1e785f48 ("net: Start with correct mac_len in skb_network_protocol") skb->mac_len is used as a start of the calculation in skb_network_protocol() but that is not always correct. If skb->protocol == 8021Q/AD, usually the vlan header is already inserted in the skb (i.e. vlan reorder hdr == 0). Usually when the packet enters dev_hard_xmit it has mac_len == 0 so we take 2 bytes from the destination mac address (skb->data + VLAN_HLEN) as a type in skb_network_protocol() and return vlan_depth == 4. In the case where TSO is off, then the mac_len is set but it's == 18 (ETH_HLEN + VLAN_HLEN), so skb_network_protocol() returns a type from inside the packet and offset == 22. Also make vlan_depth unsigned as suggested before. As suggested by Eric Dumazet, move the while() loop in the if() so we can avoid additional testing in fast path. Here are few netperf tests + debug printk's to illustrate: cat netperf.tso-on.reorder-on.bugged - Vlan -> device (reorder on, default, this case is okay) MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.3.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 7111.54 [ 81.605435] skb->len 65226 skb->gso_size 1448 skb->proto 0x800 skb->mac_len 0 vlan_depth 0 type 0x800 - Vlan -> device (reorder off, bad) cat netperf.tso-on.reorder-off.bugged MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.3.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 241.35 [ 204.578332] skb->len 1518 skb->gso_size 0 skb->proto 0x8100 skb->mac_len 0 vlan_depth 4 type 0x5301 0x5301 are the last two bytes of the destination mac. And if we stop TSO, we may get even the following: [ 83.343156] skb->len 2966 skb->gso_size 1448 skb->proto 0x8100 skb->mac_len 18 vlan_depth 22 type 0xb84 Because mac_len already accounts for VLAN_HLEN. After the fix: cat netperf.tso-on.reorder-off.fixed MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.3.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.01 5001.46 [ 81.888489] skb->len 65230 skb->gso_size 1448 skb->proto 0x8100 skb->mac_len 0 vlan_depth 18 type 0x800 CC: Vlad Yasevich <vyasevic@redhat.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Daniel Borkman <dborkman@redhat.com> CC: David S. Miller <davem@davemloft.net> Fixes:1e785f48 ("net: Start with correct mac_len in skb_network_protocol") Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2014 1 次提交
-
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Included changes: - prevent NULL dereference in multicast code Antonion Quartulli says: ==================== pull request net: batman-adv 20140527 here you have another very small fix intended for net/linux-3.15. It prevents some multicast functions from dereferencing a NULL pointer. (Actually it was nothing more than a typo) I hope it is not too late for such a small patch. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2014 6 次提交
-
-
由 Marek Lindner 提交于
Was introduced with 4c8755d6 ("batman-adv: Send multicast packets to nodes with a WANT_ALL flag") Reported-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Acked-by: NAntonio Quartulli <antonio@meshcoding.com> Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== The following patchset contains a late fix for IPVS: * Fix crash when trying to remove the transport header with non-linear skbuffs, this was introduced in 3.6-rc. Patch from Peter Christensen via the IPVS folks. I'll pass this to -stable once this hits mainstream. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== pull-request: can 2014-05-28 here's a pull request for v3.15, hope it's not too late. Oliver Hartkopp fixed a bug in the CAN led trigger device renaming code. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
Reset the GIDs assigned to a VF in the port RoCE GID table when that guest goes down (either crashes or goes down cleanly). As part of this fix, we refactor the RoCE gid table driver copy, moving it to the mlx4_port_info structure (together with the MAC and VLAN tables). As with the MAC and VLAN tables, we now use a mutex per port for the GID table so that modifying the driver copy and modifying the firmware copy of a port GID table becomes an atomic operation (thus avoiding driver-copy/FW-copy mismatches). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Mikhaylov 提交于
Aggreagation of version 1-2 because of version 1 can hit PLB errors too. If it's not set so we missing events for PLB bits and driver can't process those interrupts. Signed-off-by: NIvan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Mikhaylov 提交于
In chips of emac/rgmii b'000' for 0/1 channel isn't suitable which resulted in non working network interface in this mode. Signed-off-by: NIvan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 5月, 2014 1 次提交
-
-
由 Oliver Hartkopp 提交于
Commit a1ef7bd9 ("can: rename LED trigger name on netdev renames") renames the led trigger names according to the changed netdevice name. As not every CAN driver supports and initializes the led triggers, checking for the CAN private datastructure with safe_candev_priv() in the notifier chain is not enough. This patch adds a check when CONFIG_CAN_LEDS is enabled and the driver does not support led triggers. For stable 3.9+ Cc: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Acked-by: NKurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
- 26 5月, 2014 1 次提交
-
-
由 Peter Christensen 提交于
Receiving a ICMP response to an IPIP packet in a non-linear skb could cause a kernel panic in __skb_pull. The problem was introduced in commit f2edb9f7 ("ipvs: implement passive PMTUD for IPIP packets"). Signed-off-by: NPeter Christensen <pch@ordbogen.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 25 5月, 2014 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-05-23 I have two more fixes intended for the 3.15 stream... For the iwlwifi one, Emmanuel says: "A race has been discovered in the beacon filtering code. Since the fix is too big for 3.15, I disable here the feature." For the bluetooth one, Gustavo says: "This pull request contains a very important fix for 3.15. Here we fix the permissions of a debugfs file that would otherwise allow unauthorized users to write content to it." Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This function is called from dcbnl_build_peer_app(). The "info" struct isn't initialized at all so we disclose 2 bytes of uninitialized stack data. We should clear it before passing it to the user. Fixes: 48365e48 ('qlcnic: dcb: Add support for CEE Netlink interface.') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart De Schuymer 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 5月, 2014 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: "A small bunch of bug fixes, in particular: 1) On older cpus we need a different chunk of virtual address space to map the huge page TSB. 2) Missing memory barrier in Niagara2 memcpy. 3) trinity showed some places where fault validation was unnecessarily loud on sparc64 4) Some sysfs printf's need a type adjustment, from Toralf Förster" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: fix format string mismatch in arch/sparc/kernel/sysfs.c sparc64: Add membar to Niagara2 memcpy code. sparc64: Fix huge TSB mapping on pre-UltraSPARC-III cpus. sparc64: Don't bark so loudly about 32-bit tasks generating 64-bit fault addresses.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "It looks like a sizeble collection but this is nearly 3 weeks of bug fixing while you were away. 1) Fix crashes over IPSEC tunnels with NAT, the latter can reroute the packet through a non-IPSEC protected path and the code has to be able to handle SKBs attached to routes lacking an attached xfrm state. From Steffen Klassert. 2) Fix OOPSs in ipv4 and ipv6 ipsec layers for unsupported sub-protocols, also from Steffen Klassert. 3) Set local_df on fragmented netfilter skbs otherwise we won't be able to forward successfully, from Florian Westphal. 4) cdc_mbim ipv6 neighbour code does __vlan_find_dev_deep without holding RCU lock, from Bjorn Mork. 5) local_df test in ip_may_fragment is inverted, from Florian Westphal. 6) jme driver doesn't check for DMA mapping failures, from Neil Horman. 7) qlogic driver doesn't calculate number of TX queues properly, from Shahed Shaikh. 8) fib_info_cnt can drift irreversibly positive if we fail to allocate the fi->fib_metrics array, from Sergey Popovich. 9) Fix use after free in ip6_route_me_harder(), also from Sergey Popovich. 10) When SYSCTL is disabled, we don't handle local_port_range and ping_group_range defaults properly at all, from Cong Wang. 11) Unaccelerated VLAN tagged frames improperly handled by cdc_mbim driver, fix from Bjorn Mork. 12) cassini driver needs nested lock annotations for TX locking, from Emil Goode. 13) On init error ipv6 VTI driver can unregister pernet ops twice, oops. Fix from Mahtias Krause. 14) If macvlan device is down, don't propagate IFF_ALLMULTI changes, from Peter Christensen. 15) Missing NULL pointer check while parsing netlink config options in ip6_tnl_validate(). From Susant Sahani. 16) Fix handling of neighbour entries during ipv6 router reachability probing, from Duan Jiong. 17) x86 and s390 JIT address randomization has some address calculation bugs leading to crashes, from Alexei Starovoitov and Heiko Carstens. 18) Clear up those uglies with nop patching and net_get_random_once(), from Hannes Frederic Sowa. 19) Option length miscalculated in ip6_append_data(), fix also from Hannes Frederic Sowa. 20) A while ago we fixed a race during device unregistry when a namespace went down, turns out there is a second place that needs similar protection. From Cong Wang. 21) In the new Altera TSE driver multicast filtering isn't working, disable it and just use promisc mode until the cause is found. From Vince Bridgers. 22) When we disable router enabling in ipv6 we have to flush the cached routes explicitly, from Duan Jiong. 23) NBMA tunnels should not cache routes on the tunnel object because the key is variable, from Timo Teräs. 24) With stacked devices GRO information in skb->cb[] can be not setup properly, make sure it is in all code paths. From Eric Dumazet. 25) Really fix stacked vlan locking, multiple levels of nesting with intervening non-vlan devices are possible. From Vlad Yasevich. 26) Fallback ipip tunnel device's mtu is not setup properly, from Steffen Klassert. 27) The packet scheduler's tcindex filter can crash because we structure copy objects with list_head's inside, oops. From Cong Wang. 28) Fix CHECKSUM_COMPLETE handling for ipv6 GRE tunnels, from Eric Dumazet. 29) In some configurations 'itag' in __mkroute_input() can end up being used uninitialized because of how fib_validate_source() works. Fix it by explitly initializing itag to zero like all the other fib_validate_source() callers do, from Li RongQing" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) batman: fix a bogus warning from batadv_is_on_batman_iface() ipv4: initialise the itag variable in __mkroute_input bonding: Send ALB learning packets using the right source bonding: Don't assume 802.1Q when sending alb learning packets. net: doc: Update references to skb->rxhash stmmac: Remove unbalanced clk_disable call ipv6: gro: fix CHECKSUM_COMPLETE support net_sched: fix an oops in tcindex filter can: peak_pci: prevent use after free at netdev removal ip_tunnel: Initialize the fallback device properly vlan: Fix build error wth vlan_get_encap_level() can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option MAINTAINERS: Pravin Shelar is Open vSwitch maintainer. bnx2x: Convert return 0 to return rc bonding: Fix alb mode to only use first level vlans. bonding: Fix stacked device detection in arp monitoring macvlan: Fix lockdep warnings with stacked macvlan devices vlan: Fix lockdep warning with stacked vlan devices. net: Allow for more then a single subclass for netif_addr_lock net: Find the nesting level of a given device by type. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "The biggest commit is an irqtime accounting loop latency fix, the rest are misc fixes all over the place: deadline scheduling, docs, numa, balancer and a bad to-idle latency fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/numa: Initialize newidle balance stats in sd_numa_init() sched: Fix updating rq->max_idle_balance_cost and rq->next_balance in idle_balance() sched: Skip double execution of pick_next_task_fair() sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check sched/deadline: Fix memory leak sched/deadline: Fix sched_yield() behavior sched: Sanitize irq accounting madness sched/docbook: Fix 'make htmldocs' warnings caused by missing description
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "The biggest changes are fixes for races that kept triggering Trinity crashes, plus liblockdep build fixes and smaller misc fixes. The liblockdep bits in perf/urgent are a pull mistake - they should have been in locking/urgent - but by the time I noticed other commits were added and testing was done :-/ Sorry about that" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix a race between ring_buffer_detach() and ring_buffer_attach() perf: Prevent false warning in perf_swevent_add perf: Limit perf_event_attr::sample_period to 63 bits tools/liblockdep: Remove all build files when doing make clean tools/liblockdep: Build liblockdep from tools/Makefile perf/x86/intel: Fix Silvermont's event constraints perf: Fix perf_event_init_context() perf: Fix race in removing an event
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm radeon and nouveau fixes from Dave Airlie: "Fixes for the other big two. The radeon VCE one is large but it fixes some userspace triggerable issues, otherwise its blackscreens and oopses. Nouveau fixes a bleeding laptop panel issue when displayport is used sometimes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/pm: don't allow debugfs/sysfs access when PX card is off (v2) drm/radeon: avoid segfault on device open when accel is not working. drm/radeon: fix typo in finding PLL params drm/radeon: fix register typo on si drm/radeon: fix buffer placement under memory pressure v2 drm/radeon: fix page directory update size estimation drm/radeon: handle non-VGA class pci devices with ATRM drm/radeon: fix DCE83 check for mullins drm/radeon: check VCE relocation buffer range v3 drm/radeon: also try GART for CPU accessed buffers drm/gf119-/disp: fix nasty bug which can clobber SOR0's clock setup drm/nvd9/therm: handle another kind of PWM fan
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "9 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add closing angle bracket to Vince Bridgers' email address Documentation: fix DOCBOOKS=... building ocfs2: fix double kmem_cache_destroy in dlm_init mm/memory-failure.c: fix memory leak by race between poison and unpoison wait: swap EXIT_ZOMBIE(Z) and EXIT_DEAD(X) chars in TASK_STATE_TO_CHAR_STR memcg: fix swapcache charge from kernel thread context mm: madvise: fix MADV_WILLNEED on shmem swapouts mm/filemap.c: avoid always dirtying mapping->flags on O_DIRECT hwpoison, hugetlb: lock_page/unlock_page does not match for handling a free hugepage
-
由 Tobias Klauser 提交于
Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Cc: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
Prior to commit 42661299 ("[media] DocBook: Move all media docbook stuff into its own directory") it was possible to build only a single (or more) book(s) by calling, for example make htmldocs DOCBOOKS=80211.xml This now fails: cp: target `.../Documentation/DocBook//media_api' is not a directory Ignore errors from that copy to make this possible again. Fixes: 42661299 ("[media] DocBook: Move all media docbook stuff into its own directory") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
In dlm_init, if create dlm_lockname_cache failed in dlm_init_master_caches, it will destroy dlm_lockres_cache which created before twice. And this will cause system die when loading modules. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
When a memory error happens on an in-use page or (free and in-use) hugepage, the victim page is isolated with its refcount set to one. When you try to unpoison it later, unpoison_memory() calls put_page() for it twice in order to bring the page back to free page pool (buddy or free hugepage list). However, if another memory error occurs on the page which we are unpoisoning, memory_failure() returns without releasing the refcount which was incremented in the same call at first, which results in memory leak and unconsistent num_poisoned_pages statistics. This patch fixes it. Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> [2.6.32+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masatake YAMATO 提交于
In commit ad86622b ("wait: swap EXIT_ZOMBIE and EXIT_DEAD to hide EXIT_TRACE from user-space") the order of task state definitions were changed: EXIT_DEAD and EXIT_ZOMBIE were swapped. Though the charterers for the states in TASK_STATE_TO_CHAR_STR string were not updated. This patch synchronizes the string to the order of definitions. Signed-off-by: NMasatake YAMATO <yamato@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Commit 284f39af ("mm: memcg: push !mm handling out to page cache charge function") explicitly checks for page cache charges without any mm context (from kernel thread context[1]). This seemed to be the only possible case where memory could be charged without mm context so commit 03583f1a ("memcg: remove unnecessary !mm check from try_get_mem_cgroup_from_mm()") removed the mm check from get_mem_cgroup_from_mm(). This however caused another NULL ptr dereference during early boot when loopback kernel thread splices to tmpfs as reported by Stephan Kulow: BUG: unable to handle kernel NULL pointer dereference at 0000000000000360 IP: get_mem_cgroup_from_mm.isra.42+0x2b/0x60 Oops: 0000 [#1] SMP Modules linked in: btrfs dm_multipath dm_mod scsi_dh multipath raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod parport_pc parport nls_utf8 isofs usb_storage iscsi_ibft iscsi_boot_sysfs arc4 ecb fan thermal nfs lockd fscache nls_iso8859_1 nls_cp437 sg st hid_generic usbhid af_packet sunrpc sr_mod cdrom ata_generic uhci_hcd virtio_net virtio_blk ehci_hcd usbcore ata_piix floppy processor button usb_common virtio_pci virtio_ring virtio edd squashfs loop ppa] CPU: 0 PID: 97 Comm: loop1 Not tainted 3.15.0-rc5-5-default #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: __mem_cgroup_try_charge_swapin+0x40/0xe0 mem_cgroup_charge_file+0x8b/0xd0 shmem_getpage_gfp+0x66b/0x7b0 shmem_file_splice_read+0x18f/0x430 splice_direct_to_actor+0xa2/0x1c0 do_lo_receive+0x5a/0x60 [loop] loop_thread+0x298/0x720 [loop] kthread+0xc6/0xe0 ret_from_fork+0x7c/0xb0 Also Branimir Maksimovic reported the following oops which is tiggered for the swapcache charge path from the accounting code for kernel threads: CPU: 1 PID: 160 Comm: kworker/u8:5 Tainted: P OE 3.15.0-rc5-core2-custom #159 Hardware name: System manufacturer System Product Name/MAXIMUSV GENE, BIOS 1903 08/19/2013 task: ffff880404e349b0 ti: ffff88040486a000 task.ti: ffff88040486a000 RIP: get_mem_cgroup_from_mm.isra.42+0x2b/0x60 Call Trace: __mem_cgroup_try_charge_swapin+0x45/0xf0 mem_cgroup_charge_file+0x9c/0xe0 shmem_getpage_gfp+0x62c/0x770 shmem_write_begin+0x38/0x40 generic_perform_write+0xc5/0x1c0 __generic_file_aio_write+0x1d1/0x3f0 generic_file_aio_write+0x4f/0xc0 do_sync_write+0x5a/0x90 do_acct_process+0x4b1/0x550 acct_process+0x6d/0xa0 do_exit+0x827/0xa70 kthread+0xc3/0xf0 This patch fixes the issue by reintroducing mm check into get_mem_cgroup_from_mm. We could do the same trick in __mem_cgroup_try_charge_swapin as we do for the regular page cache path but it is not worth troubles. The check is not that expensive and it is better to have get_mem_cgroup_from_mm more robust. [1] - http://marc.info/?l=linux-mm&m=139463617808941&w=2 Fixes: 03583f1a ("memcg: remove unnecessary !mm check from try_get_mem_cgroup_from_mm()") Reported-and-tested-by: NStephan Kulow <coolo@suse.com> Reported-by: NBranimir Maksimovic <branimir.maksimovic@gmail.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
MADV_WILLNEED currently does not read swapped out shmem pages back in. Commit 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") made find_get_page() filter exceptional radix tree entries but failed to convert all find_get_page() callers that WANT exceptional entries over to find_get_entry(). One of them is shmem swap readahead in madvise, which now skips over any swap-out records. Convert it to find_get_entry(). Fixes: 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jens Axboe 提交于
In some testing I ran today (some fio jobs that spread over two nodes), we end up spending 40% of the time in filemap_check_errors(). That smells fishy. Looking further, this is basically what happens: blkdev_aio_read() generic_file_aio_read() filemap_write_and_wait_range() if (!mapping->nr_pages) filemap_check_errors() and filemap_check_errors() always attempts two test_and_clear_bit() on the mapping flags, thus dirtying it for every single invocation. The patch below tests each of these bits before clearing them, avoiding this issue. In my test case (4-socket box), performance went from 1.7M IOPS to 4.0M IOPS. Signed-off-by: NJens Axboe <axboe@fb.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen Yucong 提交于
For handling a free hugepage in memory failure, the race will happen if another thread hwpoisoned this hugepage concurrently. So we need to check PageHWPoison instead of !PageHWPoison. If hwpoison_filter(p) returns true or a race happens, then we need to unlock_page(hpage). Signed-off-by: NChen Yucong <slaoub@gmail.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Cc: <stable@vger.kernel.org> [2.6.36+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The 'renameat2()' system call was incorrectly added as a ENTRY_COMP() in the parisc system call table by commit 18e480aa ("parisc: add renameat2 syscall"). That causes a link-time error due to there not being any compat version of that system call: arch/parisc/kernel/built-in.o: In function `sys_call_table': (.rodata+0xad0): undefined reference to `compat_sys_renameat2' make: *** [vmlinux] Error 1 Easily fixed by marking the system call as being the same for compat as for native by using ENTRY_SAME() instead of ENTRY_COMP(). Reported-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NMiklos Szeredi <miklos@szeredi.hu> Acked-by: NHelge Deller <deller@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 5月, 2014 5 次提交
-
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
由 Cong Wang 提交于
batman tries to search dev->iflink to check if it's a batman interface, but ->iflink could be 0, which is not a valid ifindex. It should just avoid iflink == 0 case. Reported-by: NJet Chen <jet.chen@intel.com> Tested-by: NJet Chen <jet.chen@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Antonio Quartulli <antonio@open-mesh.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
the value of itag is a random value from stack, and may not be initiated by fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID is not set This will make the cached dst uncertainty Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
ALB learning packets are currentlyalways sent using the slave mac address for all vlans configured on top of bond. This is not always correct, as vlans may change their mac address. This patch introduced a concept of strict matching where the source of learning packets can either strictly match the address passed in, or it can determine a more correct address to use. There are 3 casese to consider: 1) Switchover. In this case, we have a new active slave and we need tell the switch about all addresses available on the slave. 2) Monitor. We'll periodically refresh learning info for all slaves. In this case, we refresh all addresses for current active, and just the slave address for other slaves. 3) Teaching of disabled adddress. This happens as part of the failover and in this case, we alwyas to use just the address provided. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
TLB/ALB learning packets always assume 802.1Q vlan protocol, but that is no longer the case since we now have support for Q-in-Q on top of bonding. Pass the vlan protocol to alb_send_lp_vid() so that the packets are properly tagged. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Acked-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-