- 02 12月, 2006 40 次提交
-
-
由 Alan Cox 提交于
[deweerdt@free.fr: build fix] Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NFrederik Deweerdt <deweerdt@free.fr> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Acked-by: Alan Cox <alan@redhat.com> but please apply as follows to keep revision id straight Cc: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Henrik Kretzschmar 提交于
pci_module_init convertion in ata_generic.c. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Winbond 83759A support in non-multichip mode (afaik nobody ever used multichip mode anyway). The 83759 is not supported by this driver as it is already handled elsewhere and doens't use the same interfaces. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 4 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 3 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 2 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 1 [WATCHDOG] MIPS RM9000 on-chip watchdog device [WATCHDOG] Add iTCO vendor specific support [WATCHDOG] sc1200wdt.c pnp unregister fix. [WATCHDOG] config.h removal [WATCHDOG] NS pc87413-wdt Watchdog driver - fixes [WATCHDOG] NS pc87413-wdt Watchdog driver v1.1 [WATCHDOG] NS pc87413-wdt Watchdog driver
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: add missing sht->slave_destroy [PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (31 commits) [MIPS] Remove duplicate ISA DMA code for 0 DMA channel case. [MIPS] Remove unused definition of cpu_to_lelongp() [MIPS] Remove userspace proofing from <asm/bitops.h>. [MIPS] Remove old junk left from old atomic_lock. [MIPS] Use conditional traps for BUG_ON on MIPS II and better. [MIPS] mips HPT cleanup: make clocksource_mips public [MIPS] do_IRQ cleanup [MIPS] Avoid dupliate D-cache flush on R400C / R4400 SC and MC variants. [MIPS] Remove redundant r4k_blast_icache() calls [MIPS] Work around bogus gcc warnings. [MIPS] Fix double inclusions [MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irq [MIPS] IRQ cleanups [MIPS] mips hpt cleanup: get rid of mips_hpt_init [MIPS] PB1200: Remove duplicate definitions [MIPS] Fix alignment hole in struct cache_desc; shrink struct. [MIPS] Oprofile: kernel support for the R10000. [MIPS] Remove unused R10000 performance counter definitions. [MIPS] Add support for kexec [MIPS] Don't print presence of WAIT instruction on bootup. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-2.6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: validate kernel object classes and permissions SELinux: ensure keys constant in hashtab_search SELinux: export object class and permission definitions SELinux: remove current object class and permission validation mechanism
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (25 commits) IB/ucm: Fix deadlock in cleanup IB/cm: Fix automatic path migration support IPoIB: Fix skb leak when freeing neighbour IB/srp: Fix memory leak on reconnect RDMA/addr: list_move() cleanups RDMA/addr: Fix some cancellation problems in process_req() RDMA/amso1100: Prevent deadlock in destroy QP IB/mthca: Fix initial SRQ logsize for mem-free HCAs IB/ehca: Use WQE offset instead of WQE addr for pending work reqs RDMA/iwcm: Fix comment for iwcm_deref_id() to match code RDMA/iwcm: Remove unnecessary function argument RDMA/iwcm: Remove unnecessary initializations RDMA/iwcm: Fix memory leak RDMA/iwcm: Fix memory corruption bug in cm_work_handler() IB: Convert kmem_cache_t -> struct kmem_cache IB/ipath: Fix typo in pma_counter_select subscript RDMA/amso1100: Fix section mismatches IB/mthca: Fix section mismatches IB/srp: Increase supported CDB size RDMA/cm: Remove setting local write as part of QP access flags ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits) usbcore: remove unused argument in autosuspend USB: keep count of unsuspended children USB hub: simplify remote-wakeup handling USB: struct usb_device: change flag to bitflag OHCI: make autostop conditional on CONFIG_PM USB: Add autosuspend support to the hub driver EHCI: Fix root-hub and port suspend/resume problems USB: create a new thread for every USB device found during the probe sequence USB: add driver for the USB debug devices USB: added dynamic major number for USB endpoints USB: pegasus error path not resetting task's state USB: endianness fix for asix.c USB: build the appledisplay driver USB serial: replace kmalloc+memset with kzalloc USB: hid-core: canonical defines for Apple USB device IDs USB: idmouse cleanup USB: make drivers/usb/core/driver.c:usb_device_match() static USB: lh7a40x_udc remove double declaration USB: pxa2xx_udc recognizes ixp425 rev b0 chip usbtouchscreen: add support for DMC TSC-10/25 devices ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits) PCI: make arch/i386/pci/common.c:pci_bf_sort static PCI: ibmphp_pci.c: fix NULL dereference pciehp: remove unnecessary pci_disable_msi pciehp: remove unnecessary free_irq PCI: rpaphp: change device tree examination PCI: Change memory allocation for acpiphp slots i2c-i801: SMBus patch for Intel ICH9 PCI: irq: irq and pci_ids patch for Intel ICH9 PCI: pci_{enable,disable}_device() nestable ports PCI: switch pci_{enable,disable}_device() to be nestable PCI: arch/i386/kernel/pci-dma.c: ioremap balanced with iounmap pci/i386: style cleanups PCI: Block on access to temporarily unavailable pci device pci: fix __pci_register_driver error handling pci: clear osc support flags if no _OSC method acpiphp: fix missing acpiphp_glue_exit() acpiphp: fix use of list_for_each macro Altix: Initial ACPI support - ROM shadowing. Altix: SN ACPI hotplug support. Altix: Add initial ACPI IO support ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) Driver core: show drivers in /sys/module/ Documentation/driver-model/platform.txt update/rewrite Driver core: platform_driver_probe(), can save codespace driver core: Use klist_remove() in device_move() driver core: Introduce device_move(): move a device to a new parent. Driver core: make drivers/base/core.c:setup_parent() static driver core: Introduce device_find_child(). sysfs: sysfs_write_file() writes zero terminated data cpu topology: consider sysfs_create_group return value Driver core: Call platform_notify_remove later ACPI: Change ACPI to use dev_archdata instead of firmware_data Driver core: add dev_archdata to struct device Driver core: convert sound core to use struct device Driver core: change mem class_devices to be real devices Driver core: convert fb code to use struct device Driver core: convert firmware code to use struct device Driver core: convert mmc code to use struct device Driver core: convert ppdev code to use struct device Driver core: convert PPP code to use struct device Driver core: convert cpuid code to use struct device ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix timezone handling on stat to os/2 [CIFS] Incorrect hardlink count when original file is cached (oplocked)
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Fix typos in drivers/isdn/hisax/isdnl2.c Fix typos in doc and comments BUG_ON conversion for fs/aio.c BUG_ON conversion for drivers/mmc/omap.c BUG_ON conversion for drivers/media/video/pwc/pwc-if.c Fix misc .c/.h comment typos Fix misc Kconfig typos Fix typos in /Documentation : Misc Fix typos in /Documentation : 'U-Z' Fix typos in /Documentation : 'T'' Fix jiffies.h comment tabify MAINTAINERS fix spelling error in include/linux/kernel.h mqueue.h: don't include linux/types.h
-
由 Kay Sievers 提交于
Show the drivers, which belong to the module: $ ls -l /sys/module/usbcore/drivers/ hub -> ../../../bus/usb/drivers/hub usb -> ../../../bus/usb/drivers/usb usbfs -> ../../../bus/usb/drivers/usbfs Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This is almost a rewrite of the driver-model/platform.txt documentation; the previous text was obsolete (for several years), evidently it never got updated to match the change from being a PC "legacy_bus" to the more widely used core bus for most embedded systems. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This defines a new platform_driver_probe() method allowing the driver's probe() method, and its support code+data, to safely live in __init sections for typical system configurations. Many system-on-chip processors could benefit from this API, to the tune of recovering hundreds to thousands of bytes per driver. That's memory which is currently wasted holding code which can never be called after system startup, yet can not be removed. It can't be removed because of the linkage requirement that pointers to init section code (like, ideally, probe support) must not live in other sections (like driver method tables) after those pointers would be invalid. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
As pointed out by Alan Stern, device_move needs to use klist_remove which waits until removal is complete. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
Provide a function device_move() to move a device to a new parent device. Add auxilliary functions kobject_move() and sysfs_move_dir(). kobject_move() generates a new uevent of type KOBJ_MOVE, containing the previous path (DEVPATH_OLD) in addition to the usual values. For this, a new interface kobject_uevent_env() is created that allows to add further environmental data to the uevent at the kobject layer. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global setup_parent() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
Introduce device_find_child() to match device_for_each_child(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Thomas Maier 提交于
since most of the files in sysfs are text files, it would be nice, if the "store" function called during sysfs_write_file() gets a zero terminated string / data. The current implementation seems not to ensure this. (But only if it is the first time the zeroed buffer page is allocated.) So the buffer can be scanned by sscanf() easily, for example. This patch simply sets a \0 char behind the data in buffer->page. Signed-off-by: NThomas Maier <balagi@justmail.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Heiko Carstens 提交于
Take return value of sysfs_create_group() into account. That function got called in case of CPU_ONLINE notification. Since callbacks are not allowed to fail on CPU_ONLINE notification do the sysfs group creation on CPU_UP_PREPARE notification. Also remember if creation succeeded in a bitmask. So it's possible to know whether it's legal to call sysfs_remove_group or not. In addition some other minor stuff: - since CPU_UP_PREPARE might fail add CPU_UP_CANCELED handling as well. - use hotcpu_notifier instead of register_hotcpu_notifier. - #ifdef code that isn't needed in the !CONFIG_HOTPLUG_CPU case. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benjamin Herrenschmidt 提交于
Move the call to platform_notify_remove() to after the call to bus_remove_device(), where it belongs. It's bogus to notify the platform of removal while drivers are still attached to the device and possibly still operating since the platform might use this callback to tear down some resources used by the driver (ACPI bits, iommu table, ...) Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benjamin Herrenschmidt 提交于
Change ACPI to use dev_archdata instead of firmware_data This patch changes ACPI to use the new dev_archdata on i386, x86_64 and ia64 (is there any other arch using ACPI ?) to store it's acpi_handle. It also removes the firmware_data field from struct device as this was the only user. Only build-tested on x86 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benjamin Herrenschmidt 提交于
Add arch specific dev_archdata to struct device Adds an arch specific struct dev_arch to struct device. This enables architecture to add specific fields to every device in the system, like DMA operation pointers, NUMA node ID, firmware specific data, etc... Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NAndi Kleen <ak@suse.de> Acked-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. It also makes the struct sound_card to show up as a "real" device where all the different sound class devices are placed as childs and different card attribute files can hang off of. /sys/class/sound is still a flat directory, but the symlink targets of all devices belonging to the same card, point the the /sys/devices tree below the new card device object. Thanks to Kay for the updates to this patch. Signed-off-by: NKay Sievers <kay.sievers@novell.com> Acked-by: NJaroslav Kysela <perex@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
As class_device is going away eventually... Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Also fixes up the isdn drivers that were putting something in the class device's directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This also ment that some of the misc drivers had to also be fixed up as they were assuming the device was a class_device. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-