- 26 3月, 2013 2 次提交
-
-
由 Ludovic Desroches 提交于
No more associate at91sam926x_time.c compilation with SOC_AT91SAM9 entry since SAMA5D3 devices will use this driver too. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Ludovic Desroches 提交于
New devices are no more prefixed with at91 so remove the at91 and _name concatenation. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 14 3月, 2013 3 次提交
-
-
Rename the board-rm9200-dt.c file so that we follow the pattern for Device Tree board files: board-dt-<name of SoC sharing same core>.c Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: modify commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
We will produce a board-dt file per SoC core type. That will ease code readability and will prevent from including superfluous code for supporting machines that will never be compiled together (particularly the ARM9 and C-A5 upcoming SoCs). Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: modify commit message] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
This is the legacy platform support Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 09 3月, 2013 1 次提交
-
-
由 Will Deacon 提交于
Commit ec221208 ("Disintegrate asm/system.h for Alpha") removed the system.h include from boot/head.S, which puts the PAL_* asm constants out of scope. Include <asm/pal.h> so we can get building again. Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: David Rusling <david.rusling@linaro.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 3月, 2013 2 次提交
-
-
由 Dave Hansen 提交于
kernel_map_sync_memtype() is called from a variety of contexts. The pat.c code that calls it seems to ensure that it is not called for non-ram areas by checking via pat_pagerange_is_ram(). It is important that it only be called on the actual identity map because there *IS* no map to sync for highmem pages, or for memory holes. The ioremap.c uses are not as careful as those from pat.c, and call kernel_map_sync_memtype() on PCI space which is in the middle of the kernel identity map _range_, but is not actually mapped. This patch adds a check to kernel_map_sync_memtype() which probably duplicates some of the checks already in pat.c. But, it is necessary for the ioremap.c uses and shouldn't hurt other callers. I have reproduced this bug and this patch fixes it for me and the original bug reporter: https://lkml.org/lkml/2013/2/5/396Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20130307163151.D9B58C4E@kernel.stglabs.ibm.comSigned-off-by: NDave Hansen <dave@sr71.net> Tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Ivan Djelic 提交于
Recent GCC versions (e.g. GCC-4.7.2) perform optimizations based on assumptions about the implementation of memset and similar functions. The current ARM optimized memset code does not return the value of its first argument, as is usually expected from standard implementations. For instance in the following function: void debug_mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter) { memset(waiter, MUTEX_DEBUG_INIT, sizeof(*waiter)); waiter->magic = waiter; INIT_LIST_HEAD(&waiter->list); } compiled as: 800554d0 <debug_mutex_lock_common>: 800554d0: e92d4008 push {r3, lr} 800554d4: e1a00001 mov r0, r1 800554d8: e3a02010 mov r2, #16 ; 0x10 800554dc: e3a01011 mov r1, #17 ; 0x11 800554e0: eb04426e bl 80165ea0 <memset> 800554e4: e1a03000 mov r3, r0 800554e8: e583000c str r0, [r3, #12] 800554ec: e5830000 str r0, [r3] 800554f0: e5830004 str r0, [r3, #4] 800554f4: e8bd8008 pop {r3, pc} GCC assumes memset returns the value of pointer 'waiter' in register r0; causing register/memory corruptions. This patch fixes the return value of the assembly version of memset. It adds a 'mov' instruction and merges an additional load+store into existing load/store instructions. For ease of review, here is a breakdown of the patch into 4 simple steps: Step 1 ====== Perform the following substitutions: ip -> r8, then r0 -> ip, and insert 'mov ip, r0' as the first statement of the function. At this point, we have a memset() implementation returning the proper result, but corrupting r8 on some paths (the ones that were using ip). Step 2 ====== Make sure r8 is saved and restored when (! CALGN(1)+0) == 1: save r8: - str lr, [sp, #-4]! + stmfd sp!, {r8, lr} and restore r8 on both exit paths: - ldmeqfd sp!, {pc} @ Now <64 bytes to go. + ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go. (...) tst r2, #16 stmneia ip!, {r1, r3, r8, lr} - ldr lr, [sp], #4 + ldmfd sp!, {r8, lr} Step 3 ====== Make sure r8 is saved and restored when (! CALGN(1)+0) == 0: save r8: - stmfd sp!, {r4-r7, lr} + stmfd sp!, {r4-r8, lr} and restore r8 on both exit paths: bgt 3b - ldmeqfd sp!, {r4-r7, pc} + ldmeqfd sp!, {r4-r8, pc} (...) tst r2, #16 stmneia ip!, {r4-r7} - ldmfd sp!, {r4-r7, lr} + ldmfd sp!, {r4-r8, lr} Step 4 ====== Rewrite register list "r4-r7, r8" as "r4-r8". Signed-off-by: NIvan Djelic <ivan.djelic@parrot.com> Reviewed-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NDirk Behme <dirk.behme@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 3月, 2013 6 次提交
-
-
由 Peter Jones 提交于
If the sentinel triggers, we do not want the boot loader authors to just poke it and make the error go away, we want them to actually fix the problem. This should help avoid making the incorrect change in non-compliant bootloaders. [ hpa: dropped the Documentation/x86/boot.txt hunk pending clarifications ] Signed-off-by: NPeter Jones <pjones@redhat.com> Link: http://lkml.kernel.org/r/1362592823-28967-1-git-send-email-pjones@redhat.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Josh Boyer 提交于
When boot_params->sentinel is set, all we really know is that some undefined set of fields in struct boot_params contain garbage. In the particular case of efi_info, however, there is a private magic for that substructure, so it is generally safe to leave it even if the bootloader is broken. kexec (for which we did the initial analysis) did not initialize this field, but of course all the EFI bootloaders do, and most EFI bootloaders are broken in this respect (and should be fixed.) Reported-by: NRobin Holt <holt@sgi.com> Link: http://lkml.kernel.org/r/CA%2B5PVA51-FT14p4CRYKbicykugVb=PiaEycdQ57CK2km_OQuRQ@mail.gmail.comTested-by: NJosh Boyer <jwboyer@gmail.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Yinghai Lu 提交于
Henrik reported that his MacAir 3.1 would not boot with | commit 8d57470d | Date: Fri Nov 16 19:38:58 2012 -0800 | | x86, mm: setup page table in top-down It turns out that we do not calculate the real_end properly: We try to get 2M size with 4K alignment, and later will round down to 2M, so we will get less then 2M for first mapping, in extreme case could be only 4K only. In Henrik's system it has (1M-32K) as last usable rage is [mem 0x7f9db000-0x7fef8fff]. The problem is exposed when EFI booting have several holes and it will force mapping to use PTE instead as we only map usable areas. To fix it, just make it be 2M aligned, so we can be guaranteed to be able to use large pages to map it. Reported-by: NHenrik Rydberg <rydberg@euromail.se> Bisected-by: NHenrik Rydberg <rydberg@euromail.se> Tested-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/CAE9FiQX4nQ7_1kg5RL_vh56rmcSHXUi1ExrZX7CwED4NGMnHfg@mail.gmail.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Krzysztof Mazur 提交于
The commit 27be4570 ('x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag') removed the hlt_works_ok flag from struct cpuinfo_x86, but boot_cpu_data and new_cpu_data initializers were not changed causing setting f00f_bug flag, instead of fdiv_bug. If CONFIG_X86_F00F_BUG is not set the f00f_bug flag is never cleared. To avoid such problems in future C99-style initialization is now used. Signed-off-by: NKrzysztof Mazur <krzysiek@podlesie.net> Acked-by: NBorislav Petkov <bp@suse.de> Cc: len.brown@intel.com Link: http://lkml.kernel.org/r/1362266082-2227-1-git-send-email-krzysiek@podlesie.netSigned-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Stephen Boyd 提交于
WARNING: vmlinux.o(.text+0xfb80): Section mismatch in reference from the function armpmu_register() to the function .init.text:armpmu_init() The function armpmu_register() references the function __init armpmu_init(). This is often because armpmu_register lacks a __init annotation or the annotation of armpmu_init is wrong. Just drop the __init marking on armpmu_init() because armpmu_register() no longer has an __init marking. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jonathan Austin 提交于
Before jumping to (position independent) C-code from the decompressor's assembler world we set-up the C environment. This setup currently does not set r9, which for arm-none-uclinux-uclibceabi toolchains is by default expected to be the PIC offset base register (IE should point to the beginning of the GOT). Currently, therefore, in order to build working kernels that use the decompressor it is necessary to use an arm-linux-gnueabi toolchain, or similar. uClinux toolchains cause a prefetch abort to occur at the beginning of the decompress_kernel function. This patch allows uClinux toolchains to build bootable zImages by forcing the -mno-single-pic-base option, which ensures that the location of the GOT is re-derived each time it is required, and r9 becomes free for use as a general purpose register. This has a small (4% in instruction terms) advantage over the alternative of setting r9 to point to the GOT before calling into the C-world. Signed-off-by: NJonathan Austin <jonathan.austin@arm.com> Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 06 3月, 2013 1 次提交
-
-
由 Borislav Petkov 提交于
The cpuinfo_x86 ptr is unused now. Drop it. Got obsolete by 69fb3676 ("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param") removing its only user. [ hpa: fixes gcc warning ] Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1362428180-8865-2-git-send-email-bp@alien8.de Cc: Len Brown <len.brown@intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 05 3月, 2013 10 次提交
-
-
由 Michael Neuling 提交于
We support DSCR (Data Stream Control Register) so we should make sure we set it in the FSCR (Facility Status & Control Register) incase some firmwares don't set it. If we don't set this, we'll take a facility unavailable exception when using the DSCR. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This sets the DSCR (Data Stream Control Register) in the FSCR (Facility Status & Control Register). Also harmonise TAR (Target Address Register) FSCR bit definition too. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Currently we only set the FSCR (Facility Status and Control Register) when HV=1 but this feature is available when HV=0 also. This patch sets FSCR when HV=0. Also, we currently only set the FSCR on the master CPU. This patch also sets the FSCR on secondary CPUs. Signed-off-by: NMichael Neuling <mikey@neuling.org> cc: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tony Breeds 提交于
Since kmp takes 2 unsigned long args there should be a compat wrapper. Since one isn't provided I think it's safer just to hook this up to not implemented. If we need it later we can do it properly then. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Akinobu Mita 提交于
The BITOP_LE_SWIZZLE macro was used in the little-endian bitops functions for powerpc. But these functions were converted to generic bitops and the BITOP_LE_SWIZZLE is not used anymore. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Currently we use the link register to branch up high in the early MMU on syscall entry path. Unfortunately, this trashes the link stack as the address we are going to is not associated with the earlier mflr. This patch simply converts us to used the count register (volatile over syscalls anyway) instead. This is much better at predicting in this scenario and doesn't trash link stack causing a bunch of additional branch mispredicts later. Benchmarking this on POWER8 saves a bunch of cycles on Anton's null syscall benchmark here: http://ozlabs.org/~anton/junkcode/null_syscall.cSigned-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Chen Gang 提交于
the dest buf len is 80 (HVCS_CLC_LENGTH + 1). the src buf len is PAGE_SIZE. if src buf string len is more than 80, it will cause issue. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tony Breeds 提交于
When building with CRYPTO_SHA1_PPC enabled we fail with: powerpc/crypto/sha1-powerpc-asm.S: Assembler messages: powerpc/crypto/sha1-powerpc-asm.S:116: Error: can't resolve `0' {*ABS* section} - `STACKFRAMESIZE' {*UND* section} powerpc/crypto/sha1-powerpc-asm.S:116: Error: expression too complex powerpc/crypto/sha1-powerpc-asm.S:178: Error: unsupported relocation against STACKFRAMESIZE Use INT_FRAME_SIZE instead of STACKFRAMESIZE. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Tested-by: NChristian Kujau <lists@nerdbynature.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Chris Metcalf 提交于
This was pointed out by Al Viro. Using the correct wrappers properly does sign extension as necessary on syscall arguments. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
sys_llseek should specify the high and low 32-bit seek values as "unsigned int" but instead it specifies "unsigned long". Since compat syscall arguments are always sign-extended on tile, this means that a seek value of 0xffffffff will be incorrectly interpreted as a value of -1ULL. To avoid the risk of breaking binary compatibility on architectures that already use sys_llseek this way, we follow the same path as MIPS and provide a wrapper override. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Cc: stable@kernel.org [v3.6 onwards]
-
- 04 3月, 2013 15 次提交
-
-
由 Paul Mundt 提交于
The metag NUMA implementation follows the SH model, using different nodes for memories with different latencies. As such, we ensure that automated balancing between nodes is inhibited, by way of the new ARCH_WANT_VARIABLE_LOCALITY. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Commit e72837e3 ("default SET_PERSONALITY() in linux/elf.h"). The above commit moved the common definition of SET_PERSONALITY() in a bunch of the arch headers to linux/elf.h. Metag shares that common definition so remove it from arch/metag/include/asm/elf.h too. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 Eric W. Biederman 提交于
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Acked-by: NKees Cook <keescook@chromium.org> Reported-by: NKees Cook <keescook@google.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Cyrill Gorcunov 提交于
Wire up kcmp syscall for ability to proceed checkpoint/restore procedure on ARM platform. Signed-off-by: NAlexander Kartashov <alekskartashov@parallels.com> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Chen Gang 提交于
Commit 9dcbf466 ("ARM: perf: simplify __hw_perf_event_init err handling") tidied up the error handling code for perf event initialisation on ARM, but a copy-and-paste error left a dangling semicolon at the end of an if statement. This patch removes the broken semicolon, restoring the old group validation semantics. Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: NDirk Behme <dirk.behme@gmail.com> Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
Masked out PMXEVTYPER.NSH means that we can't enable profiling at PL2, regardless of the settings in the HDCR. This patch fixes the broken mask. Cc: <stable@vger.kernel.org> Reported-by: NChristoffer Dall <cdall@cs.columbia.edu> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dietmar Eggemann 提交于
We must mask out the CPU_TASKS_FROZEN bit so that reset_ctrl_regs is also called on a secondary CPU during s2ram resume, where only the boot CPU will receive the PM_EXIT notification. Signed-off-by: NDietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
The ARM ARM requires branch predictor maintenance if, for a given ASID, the instructions at a specific virtual address appear to change. From the kernel's point of view, that means: - Changing the kernel's view of memory (e.g. switching to the identity map) - ASID rollover (since ASIDs will be re-allocated to new tasks) This patch adds explicit branch predictor maintenance when either of the two conditions above are met. Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
The ARM architecture requires explicit branch predictor maintenance when updating an instruction stream for a given virtual address. In reality, this isn't so much of a burden because the branch predictor is flushed during the cache maintenance required to make the new instructions visible to the I-side of the processor. However, there are still some cases where explicit flushing is required, so add a local_bp_flush_all operation to deal with this. Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
If a thread triggers an ASID rollover, other threads of the same process must be made to wait until the mm->context.id for the shared mm_struct has been updated to new generation and associated book-keeping (e.g. TLB invalidation) has ben performed. However, there is a *tiny* window where both mm->context.id and the relevant active_asids entry are updated to the new generation, but the TLB flush has not been performed, which could allow another thread to return to userspace with a dirty TLB, potentially leading to data corruption. In reality this will never occur because one CPU would need to perform a context-switch in the time it takes another to do a couple of atomic test/set operations but we should plug the race anyway. This patch moves the active_asids update until after the potential TLB flush on context-switch. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
The LPAE page table format uses 64-bit descriptors, so we need to take endianness into account when populating the swapper and idmap tables during early initialisation. This patch ensures that we store the two words making up each page table entry in the correct order when running big-endian. Cc: <stable@vger.kernel.org> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Shawn Guo 提交于
When booting a SMP build kernel with nosmp on kernel cmdline, the following fat warning will be hit. ------------[ cut here ]------------ WARNING: at arch/arm/kernel/smp_twd.c:345 twd_local_timer_of_register+0x7c/0x90() twd_local_timer_of_register failed (-6) Modules linked in: Backtrace: [<80011f14>] (dump_backtrace+0x0/0x10c) from [<8044dd30>] (dump_stack+0x18/0x1c) r7:805e9f58 r6:805ba84c r5:80539331 r4:00000159 [<8044dd18>] (dump_stack+0x0/0x1c) from [<80020fbc>] (warn_slowpath_common+0x54/0x6c) [<80020f68>] (warn_slowpath_common+0x0/0x6c) from [<80021078>] (warn_slowpath_fmt+0x38/0x40) r9:412fc09a r8:8fffffff r7:ffffffff r6:00000001 r5:80633b8c r4:80b32da8 [<80021040>] (warn_slowpath_fmt+0x0/0x40) from [<805ba84] (twd_local_timer_of_register+0x7c/0x90) r3:fffffffa r2:8053934b [<805ba7d0>] (twd_local_timer_of_register+0x0/0x90) from [<805c0bec>] (imx6q_timer_init+0x18/0x4c) r5:80633800 r4:8053b701 [<805c0bd4>] (imx6q_timer_init+0x0/0x4c) from [<805ba4e8>] (time_init+0x28/0x38) r5:80633800 r4:805dc0f4 [<805ba4c0>] (time_init+0x0/0x38) from [<805b6854>] (start_kernel+0x1a0/0x310) [<805b66b4>] (start_kernel+0x0/0x310) from [<10008044>] (0x10008044) r8:1000406a r7:805f3f8c r6:805dc0c4 r5:805f0518 r4:10c5387d ---[ end trace 1b75b31a2719ed1c ]--- Check (!is_smp() || !setup_max_cpus) in twd_local_timer_of_register() to make it be a no-op for the conditions, thus avoid above warning. Reported-by: NDirk Behme <dirk.behme@de.bosch.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix missing use of the asid macro when getting the ASID from the mm->context.id field. Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
The Netx IRQs offset from zero, which is illegal, since Linux IRQ 0 is NO_IRQ. Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Reviewed-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-