- 20 8月, 2010 3 次提交
-
-
由 Alex Deucher 提交于
Add options necessary bits for: - SS on DP - SS on LVDS - set clocks right for DP - deep color on hdmi (needs additional encoder and edid work as well) Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jean Delvare 提交于
Always zero-init a structure on the stack which is returned by a function. Otherwise you may leak random stack data from previous function calls. This fixes the following warning I was seeing: CC [M] drivers/gpu/drm/radeon/radeon_atombios.o drivers/gpu/drm/radeon/radeon_atombios.c: In function "radeon_atom_get_hpd_info_from_gpio": drivers/gpu/drm/radeon/radeon_atombios.c:261: warning: "hpd.plugged_state" is used uninitialized in this function Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
GTT/VRAM overlapping test had a typo which leaded to not detecting case when vram_end > gtt_end. This patch fix the logic and should fix #16574 Signed-off-by: NJerome Glisse <jglisse@redhat.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 17 8月, 2010 2 次提交
-
-
由 Dave Airlie 提交于
With the current screwed but its ABI, ioctls for the drm, Linus pointed out that we could allow userspace to specify the allocation size, but we pass it to the driver which then uses it blindly to store a struct. Now if userspace specifies the allocation size as smaller than the driver needs, the driver can possibly overwrite memory. This patch restructures the driver ioctls so we store the structure size we are expecting, and make sure we allocate at least that size. The copy from/to userspace are still restricted to the size the user specifies, this allows ioctl structs to grow on both sides of the equation. Up until now we didn't really use the DRM_IOCTL defines in the kernel, so this cleans them up and adds them for nouveau. v2: fix nouveau pushbuf arg (thanks to Ben for pointing it out) Reported-by: NLinus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
non-critical issue, CVE-2010-2803 Userspace controls the amount of memory to be allocate, so it can get the ioctl to allocate more memory than the kernel uses, and get access to kernel stack. This can only be done for processes authenticated to the X server for DRI access, and if the user has DRI access. Fix is to just memset the data to 0 if the user doesn't copy into it in the first place. Reported-by: NKees Cook <kees@ubuntu.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 12 8月, 2010 9 次提交
-
-
由 Dave Airlie 提交于
nouveau starting using these APIs, the first on non-x86 hw, and this include isn't required on anything with real amounts of vmalloc space. this fixes a build problem on powerpc. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
We don't actually need this include on any platform. built on powerpc + x86, reported on m68k. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
When we find no ROM we understand and a device-tree is present, see if we can retreive clock info from there. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This never really got fixed in mesa, and the kernel deals with the problem just fine, so don't got reporting things that confuse people. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
0 is a valid DMA address from pci_map_page(), use pci_dma_mapping_error() instead to check for errors [airlied: fix warning + two other places with errors.] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
When removing of the BKL the locking around lastclose() was rearranged and resulted in the holding of the open_count spinlock over the call into drm_lastclose(). The drivers were not ready for this path to be atomic - it may indeed involve long waits to release old objects and cleanup the GPU - and so we ended up scheduling whilst atomic. [ 54.625598] BUG: scheduling while atomic: X/3546/0x00000002 [ 54.625600] Modules linked in: sco bridge stp llc input_polldev rfcomm bnep l2cap crc16 sch_sfq ipv6 md_mod acpi_cpufreq mperf cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt dm_mod btusb bluetooth usbhid hid zaurus cdc_ether usbnet mii cdc_wdm cdc_acm uvcvideo videodev v4l1_compat v4l2_compat_ioctl32 snd_hda_codec_conexant arc4 pcmcia ecb snd_hda_intel joydev sdhci_pci sdhci snd_hda_codec tpm_tis firewire_ohci mmc_core e1000e uhci_hcd thinkpad_acpi nvram yenta_socket pcmcia_rsrc pcmcia_core tpm wmi sr_mod firewire_core iwlagn ehci_hcd snd_hwdep snd_pcm usbcore tpm_bios thermal led_class snd_timer iwlcore snd soundcore ac snd_page_alloc pcspkr psmouse serio_raw battery sg mac80211 evdev cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support cdrom processor crc_itu_t rfkill xfs exportfs sd_mod crc_t10dif ahci libahci libata scsi_mod [last unloaded: scsi_wait_scan] [ 54.625663] Pid: 3546, comm: X Not tainted 2.6.35-04771-g17879857 #301 [ 54.625665] Call Trace: [ 54.625671] [<ffffffff8102d599>] __schedule_bug+0x57/0x5c [ 54.625675] [<ffffffff81384141>] schedule+0xe5/0x832 [ 54.625679] [<ffffffff81163e77>] ? put_dec+0x20/0x3c [ 54.625682] [<ffffffff81384dd4>] schedule_timeout+0x275/0x29f [ 54.625686] [<ffffffff810455e1>] ? process_timeout+0x0/0xb [ 54.625688] [<ffffffff81384e17>] schedule_timeout_uninterruptible+0x19/0x1b [ 54.625691] [<ffffffff81045893>] msleep+0x16/0x1d [ 54.625695] [<ffffffff812a2e53>] i9xx_crtc_dpms+0x273/0x2ae [ 54.625698] [<ffffffff812a18be>] intel_crtc_dpms+0x28/0xe7 [ 54.625702] [<ffffffff811ec0fa>] drm_helper_disable_unused_functions+0xf0/0x118 [ 54.625705] [<ffffffff811ecde3>] drm_crtc_helper_set_config+0x644/0x7c8 [ 54.625708] [<ffffffff811f12dd>] ? drm_copy_field+0x40/0x50 [ 54.625711] [<ffffffff811ebca2>] drm_fb_helper_force_kernel_mode+0x3e/0x85 [ 54.625713] [<ffffffff811ebcf2>] drm_fb_helper_restore+0x9/0x24 [ 54.625717] [<ffffffff81290a41>] i915_driver_lastclose+0x2b/0x5c [ 54.625720] [<ffffffff811f14a7>] drm_lastclose+0x44/0x2ad [ 54.625722] [<ffffffff811f1ed2>] drm_release+0x5c6/0x609 [ 54.625726] [<ffffffff810d1275>] fput+0x109/0x1c7 [ 54.625728] [<ffffffff810ce5e4>] filp_close+0x61/0x6b [ 54.625731] [<ffffffff810ce680>] sys_close+0x92/0xd4 [ 54.625734] [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b v2: The spinlock is actually superfluous as access to open_count is entirely serialised by drm_global_mutex and so can be dropped. The count_lock spinlock instead appears to be used to protect access to dev->buf_alloc and dev->buf_use. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marek Olšák 提交于
This is a CS checker fix. I need this for FP16 alpha-test. Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
add default case for buffer formats Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: Andre Maasikas <amaasikas@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Davidlohr Bueso 提交于
Currently most, if not all, memory allocation in drm_bufs.c is followed by initializing the memory with 0. Replace the use of kmalloc+memset with kzalloc. Signed-off-by: NDavidlohr Bueso <dave@gnu.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 10 8月, 2010 20 次提交
-
-
由 James Simmons 提交于
Expand the crtc_gamma_set function to accept a starting offset. The reason for this is to eventually use this function for setcolreg from drm_fb_helper.c. The fbdev colormap function can start at any offset in the color map. Signed-by: NJames Simmons <jsimmons@infradead.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
... of the code, not of the mode lists. Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
This brings us in line with the EDID spec recommendation for mode priority sorting. We still don't extract all the modes we could from VTB, but VTB is so rare in the wild that I'm not really concerned. Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
This is consistent with trying to access a filename that not exist within a directory which is a good analogy here. The main reason for the change is that it is easy to confuse the error code of EBADF as an performing an ioctl on an invalid file descriptor (rather than an unknown object). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Fixes lack of power saving with multiple heads on some desktop cards. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16474Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
HPD pins are reversed Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29387Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
Change the interface to expect a PTR_ERR specifing the real error code as opposed to assuming a NULL return => -EINVAL. Just once the user may not be at fault! Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dan Carpenter 提交于
Smatch complained that the ERR_PTR from hwmon_device_register() wasn't handled. I added some error handling in radeon_hwmon_init() to silence the warning. Unfortunately errors from radeon_pm_init() aren't handled so this doesn't really make a difference beyond silencing the warning. Also I changed DRM_ERROR() to dev_err() which is the new preferred method. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
router objects are found on systems that use a mux to control ddc line to connector routing or to control the actual clock and data routing from the chip to the connectors. This patch implements ddc line routing. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Handle asic specific table to hw mappings in combios_setup_i2c_bus() directly. This allows us to remove most of the combios quirks and clean up the i2c bus setup. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Previously we added i2c buses as needed when enumerating connectors power management, etc. This only exposed the actual buses used and could have lead to the same buse getting created more than once if one buses was used for more than one purpose. This patch sets up all i2c buses on the card in one place and users of the buses just point back to the one instance. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- buffer offsets in the base regs are 256b aligned so shift properly when comparing, fixed by Andre Maasikas - mipmap size was calculated wrong when nlevel=0 - texture bo offsets were used after the bo base address was added - vertex resource size register is size - 1, not size Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: Andre Maasikas <amaasikas@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
(For some reason I thought that went in ages ago ...) This fixes support for PCI domains in what should hopefully be a backward compatible way along with a change to libdrm. When the interface version is set to 1.4, we assume userspace understands domains and the world is at peace. We thus pass proper domain numbers instead of 0 to userspace. The newer libdrm will then try 1.4 first, and fallback to 1.1, along with ignoring domains in the later case (well, except on alpha of course) Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
* 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: (27 commits) drm/nvc0: fix typo in PRAMIN flush drm/nouveau: Fix DCB TMDS config parsing. drm/nv30: Fix PFB init for nv31. drm/nv04: Fix up SGRAM density detection. drm/i2c/ch7006: Don't use POWER_LEVEL_FULL_POWER_OFF on early chip versions. drm/nouveau: Init dcb->or on cards that have no usable DCB table. drm/nouveau: reduce severity of some "error" messages drm/nvc0: backup bar3 channel on suspend drm/nouveau: implement init table opcodex 0x5e and 0x9a drm/nouveau: implement init table op 0x57, INIT_LTIME drm/nvc0: implement crtc pll setting drm/nvc0: fix evo dma object so we display something drm/nvc0: rudimentary instmem support drm/nvc0: implement memory detection drm/nvc0: allow INIT_GPIO drm/nvc0: starting point for GF100 support, everything stubbed drm/nv30: Workaround dual TMDS brain damage. drm/nouveau: No need to set slave TV encoder configs explicitly. drm/nv17-nv4x: Attempt to init some external TMDS transmitters. drm/nv10: Fix up switching of NV10TCL_DMA_VTXBUF. ...
-
由 Dr. David Alan Gilbert 提交于
This hasn't mattered up until the ioctl started using the value, and it fell apart. fixes fd.o 29340, Ubuntu LP 606081 [airlied: cleaned up whitespace and don't need an error before pushing] Signed-off-by: NDr. David Alan Gilbert <linux@treblig.org> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 8月, 2010 6 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Thinko caused by 43bda05428a3d2021f3c12220073e0251c65df8b. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Fixes a regression introduced by 58bbb63720c8997e0136fe1884101e7ca40d68fd (fdo bug 29324). Reported-by: NJohannes Obermayr <johannesobermayr@gmx.de> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
We need a valid OR value because there're a few nv17 cards with DCB v1.4. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-