- 17 4月, 2008 40 次提交
-
-
missing a semicolon Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Instead of declaring them inside of X86_64 ifdef, do it unconditionally Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
This mapping already exists in x86_64, just provide it for i386 Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
take them off smp_{32,64}.h and move to smp.h Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
it is always integrated, so define as 1. Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
now that it is the same between arches, put it into smpboot.c Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
It is used to match i386. The definition for the non-paravirt case is moved to smp.h instead of smp_32.h Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Starikovskiy 提交于
[ mingo@elte.hu: fix boot regression. ] Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Starikovskiy 提交于
Signed-off: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
When acpi=off or there is no SRAT defined, apicid_to_node is got from K8 Northbridge PCI configuration space in k8_scan_nodes() in arch/x86_64/mm/k8toplogy.c. The problem is that it assumes bsp apic id is 0 at that point. For four socket system with Quad core cpus installed, all cpus apic id is offset by 4, and bsp apic id is 4. For eight socket system with dual core cpus installed, all cpus apic id is offset by 2, and bsp apic id is 2. We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called. So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mikael Pettersson 提交于
<asm-x86/nops.h> describes certain multibyte instructions as "generic" nops when in fact they aren't nops at all in 64-bit mode (missing REX.W causing truncation of a register). Update the comment to state that K8 or P6 style nops should be used in 64-bit mode. This matches what the alternatives code does. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Otherwise, enabling (or better, subsequent disabling) of single stepping would cause a kernel oops on CPUs not having this MSR. The patch could have been added a conditional to the MSR write in user_disable_single_step(), but centralizing the updates seems safer and (looking forward) better manageable. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 stephane eranian 提交于
adds AMD Northbridge config MSR definition Signed-off-by: NStephane Eranian <eranian@gmail.com> Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 stephane eranian 提交于
adds cpu_has_arch_perfmon to test presence of architectural perfmon on Intel x86 processor Signed-off-by: NStephane Eranian <eranian@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> arch/x86/kernel/reboot.c | 1 - include/asm-x86/elf.h | 5 ++--- include/asm-x86/posix_types.h | 8 +------- include/asm-x86/processor.h | 3 +-- include/asm-x86/unistd.h | 8 +------- 5 files changed, 5 insertions(+), 20 deletions(-) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
store initial_apicid from early identify. it is could be different from phys_proc_id later. also print it out in /proc/cpuinfo. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
all reboot details are handled in reboot.c and quirks are handled via reboot_fixups_32.c. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mathieu Desnoyers 提交于
Fix a memcpy that should be a text_poke (in apply_alternatives). Use kernel_wp_save/kernel_wp_restore in text_poke to support DEBUG_RODATA correctly and so the CPU HOTPLUG special case can be removed. Add text_poke_early, for alternatives and paravirt boot-time and module load time patching. Changelog: - Fix text_set and text_poke alignment check (mixed up bitwise and and or) - Remove text_set - Export add_nops, so it can be used by others. - Document text_poke_early. - Remove clflush, since it breaks some VIA architectures and is not strictly necessary. - Add kerneldoc to text_poke and text_poke_early. - Create a second vmap instead of using the WP bit to support Xen and VMI. - Move local_irq disable within text_poke and text_poke_early to be able to be sleepable in these functions. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Andi Kleen <andi@firstfloor.org> CC: pageexec@freemail.hu CC: H. Peter Anvin <hpa@zytor.com> CC: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Before: total: 0 errors, 3 warnings, 685 lines checked After: total: 0 errors, 1 warnings, 678 lines checked No code changed: arch/x86/kernel/signal_32.o: text data bss dec hex filename 5333 0 4 5337 14d9 signal_32.o.before 5333 0 4 5337 14d9 signal_32.o.after md5: c279e98012a2808e90cfa2a7787e42a4 signal_32.o.before.asm c279e98012a2808e90cfa2a7787e42a4 signal_32.o.after.asm Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
add comments to the FPU structures of processor.h. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
setup_trampoline() looks very similar between architectures, and this patch unifies them. The i386 version allocates bootmem memory, while the x86_64 version uses a fixed address. In this patch, we initialize the global trampoline_base to the x86_64 version, and i386 allocation can later override it. Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
In here, they can serve both architectures Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
They are now equal, and are moved to a common file Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
definitions that are inside CONFIG_HOTPLUG_CPU in the arch-specific smp*.h files are moved to common header Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
And move its extern definition to smp.h, the common header Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
move definitions that are now equal in type from smpboot_{32,64}.c to smpboot.c cpu_callin_map is put temporarily in smp_64.h (already exists in smp_32.h), and will soon be merged. Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
so they can have the same type as x86_64 Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
it is already defined in smp.h Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
function definition is moved to common header. x86_64 version is now called native_smp_send_stop Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
In x86_64, hlt always work. in i386, we'll query the cpuinfo associated with this cpu Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
this patches moves prefill_possible_map() to smpboot.c Right now it is x86_64-specific, but nothing intrinsically prevents it to be used by i386 Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
disabled_cpus is (up to now) a x86_64-only contruction. But it's extern declaration can be moved to common header anyway Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
definition is moved to common header. x86_64 version is now called native_smp_cpus_done Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
definition is moved to common header. x86_64 version is now called native_smp_prepare_cpus Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
definition is moved to common header. x86_64 version is now called native_prepare_boot_cpu Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Glauber Costa 提交于
function definition is moved to common header. x86_64 version is now called native_cpu_up Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-