Pull an APM fix from Jiri Kosina:
 "One deadlock/race fix from Niel that got introduced when we were
  moving away from freezer_*_count() to wait_event_freezable()."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm:
  APM: fix deadlock in APM_IOC_SUSPEND ioctl

Merge batch of fixes from Andrew Morton:
 "The simple_open() cleanup was held back while I wanted for laggards to
  merge things.

  I still need to send a few checkpoint/restore patches.  I've been
  wobbly about merging them because I'm wobbly about the overall
  prospects for success of the project.  But after speaking with Pavel
  at the LSF conference, it sounds like they're further toward
  completion than I feared - apparently davem is at the "has stopped
  complaining" stage regarding the net changes.  So I need to go back
  and re-review those patchs and their (lengthy) discussion."

* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
  memcg swap: use mem_cgroup_uncharge_swap fix
  backlight: add driver for DA9052/53 PMIC v1
  C6X: use set_current_blocked() and block_sigmask()
  MAINTAINERS: add entry for sparse checker
  MAINTAINERS: fix REMOTEPROC F: typo
  alpha: use set_current_blocked() and block_sigmask()
  simple_open: automatically convert to simple_open()
  scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
  libfs: add simple_open()
  hugetlbfs: remove unregister_filesystem() when initializing module
  drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
  fs/xattr.c:setxattr(): improve handling of allocation failures
  fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
  fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
  sysrq: use SEND_SIG_FORCED instead of force_sig()
  proc: fix mount -t proc -o AAA

Although mem_cgroup_uncharge_swap has an empty placeholder for
!CONFIG_CGROUP_MEM_RES_CTLR_SWAP the definition is placed in the
CONFIG_SWAP ifdef block so we are missing the same definition for
!CONFIG_SWAP which implies !CONFIG_CGROUP_MEM_RES_CTLR_SWAP.

This has not been an issue before, because mem_cgroup_uncharge_swap was
not called from !CONFIG_SWAP context.  But Hugh Dickins has a cleanup
patch to call __mem_cgroup_commit_charge_swapin which is defined also
for !CONFIG_SWAP.

Let's move both the empty definition and declaration outside of the
CONFIG_SWAP block to avoid the following compilation error:

  mm/memcontrol.c: In function '__mem_cgroup_commit_charge_swapin':
  mm/memcontrol.c:2837: error: implicit declaration of function 'mem_cgroup_uncharge_swap'

if CONFIG_SWAP is disabled.
Reported-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DA9052/53 PMIC has capability to supply power for upto 3 banks of 6
white serial LEDS.  It can also control intensity of independent banks
and to drive these banks boost converter will provide up to 24V and
forward current of max 50mA.

This patch allows to control intensity of the individual WLEDs bank
through DA9052/53 PMIC.

This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures.  In the past some architectures got this code
wrong, so using this helper function should stop that from happening
again.
Acked-by: NMark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristopher Li <sparse@chrisli.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remoteproc.txt should have been .h
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check for shared signals we're about to block.

Also, use the new helper function introduced in commit 5e6292c0
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures.  In the past some architectures got this code
wrong, so using this helper function should stop that from happening
again.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Find instances of an open-coded simple_open() and replace them with
calls to simple_open().
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reported-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

debugfs and a few other drivers use an open-coded version of
simple_open() to pass a pointer from the file to the read/write file
ops.  Add support for this simple case to libfs so that we can remove
the many duplicate copies of this simple function.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It was introduced by d1d5e05f ("hugetlbfs: return error code when
initializing module") but as Al pointed out, is a bad idea.

Quoted comments from Al:
 "Note that unregister_filesystem() in module init is *always* wrong;
  it's not an issue here (it's done too early to care about and
  realistically the box is not going anywhere - it'll panic when attempt
  to exec /sbin/init fails, if not earlier), but it's a damn bad
  example.

  Consider a normal fs module.  Somebody loads it and in parallel with
  that we get a mount attempt on that fs type.  It comes between
  register and failure exits that causes unregister; at that point we
  are screwed since grabbing a reference to module as done by mount is
  enough to prevent exit, but not to prevent the failure of init.  As
  the result, module will get freed when init fails, mounted fs of that
  type be damned."

So remove it.
Signed-off-by: NHillf Danton <dhillf@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to 88pm860x spec, rtc alarm irq enable control is bit3 for
RTC_ALARM_EN, so fix it.
Signed-off-by: NJett.Zhou <jtzhou@marvell.com>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allocation can be as large as 64k.

 - Add __GFP_NOWARN so the a falied kmalloc() is silent

 - Fall back to vmalloc() if the kmalloc() failed

Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: David Rientjes <rientjes@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allocation can be as large as 64k.  As David points out, "falling
back to vmalloc here is much better solution than failing to retreive
the attribute - it will work no matter how fragmented memory gets.  That
means we don't get incomplete backups occurring after days or months of
uptime and successful backups".

Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: David Rientjes <rientjes@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This size is user controllable, up to a maximum of XATTR_LIST_MAX (64k).
So it's trivial for someone to trigger a stream of order:4 page
allocation errors.
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change send_sig_all() to use do_send_sig_info(SEND_SIG_FORCED) instead
of force_sig(SIGKILL).  With the recent changes we do not need force_ to
kill the CLONE_NEWPID tasks.

And this is more correct.  force_sig() can race with the exiting thread,
while do_send_sig_info(group => true) kill the whole process.

Some more notes from Oleg Nesterov:

> Just one note. This change makes no difference for sysrq_handle_kill().
> But it obviously changes the behaviour sysrq_handle_term(). I think
> this is fine, if you want to really kill the task which blocks/ignores
> SIGTERM you can use sysrq_handle_kill().
>
> Even ignoring the reasons why force_sig() is simply wrong here,
> force_sig(SIGTERM) looks strange. The task won't be killed if it has
> a handler, but SIG_IGN can't help. However if it has the handler
> but blocks SIGTERM temporary (this is very common) it will be killed.

Also,

> force_sig() can't kill the process if the main thread has already
> exited. IOW, it is trivial to create the process which can't be
> killed by sysrq.

So, this patch fixes the issue.
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The proc_parse_options() call from proc_mount() runs only once at boot
time.  So on any later mount attempt, any mount options are ignored
because ->s_root is already initialized.

As a consequence, "mount -o <options>" will ignore the options.  The
only way to change mount options is "mount -o remount,<options>".

To fix this, parse the mount options unconditionally.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Reported-by: NArkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Tested-by: NArkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  Fix UNC parsing on mount
  Remove unnecessary check for NULL in password parser
  CIFS: Fix VFS lock usage for oplocked files
  Revert "CIFS: Fix VFS lock usage for oplocked files"
  cifs: writing past end of struct in cifs_convert_address()
  cifs: silence compiler warnings showing up with gcc-4.7.0
  CIFS: Fix VFS lock usage for oplocked files

Pull KGDB/KDB regression fixes from Jason Wessel:
 - Fix a Smatch warning that appeared in the 3.4 merge window
 - Fix kgdb test suite with SMP for all archs without HW single stepping
 - Fix kgdb sw breakpoints with CONFIG_DEBUG_RODATA=y limitations on x86
 - Fix oops on kgdb test suite with CONFIG_DEBUG_RODATA
 - Fix kgdb test suite with SMP for all archs with HW single stepping

* tag 'for_linus-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  x86,kgdb: Fix DEBUG_RODATA limitation using text_poke()
  kgdb,debug_core: pass the breakpoint struct instead of address and memory
  kgdbts: (2 of 2) fix single step awareness to work correctly with SMP
  kgdbts: (1 of 2) fix single step awareness to work correctly with SMP
  kgdbts: Fix kernel oops with CONFIG_DEBUG_RODATA
  kdb: Fix smatch warning on dbg_io_ops->is_console

Pull DMA mapping branch from Marek Szyprowski:
 "Short summary for the whole series:

  A few limitations have been identified in the current dma-mapping
  design and its implementations for various architectures.  There exist
  more than one function for allocating and freeing the buffers:
  currently these 3 are used dma_{alloc, free}_coherent,
  dma_{alloc,free}_writecombine, dma_{alloc,free}_noncoherent.

  For most of the systems these calls are almost equivalent and can be
  interchanged.  For others, especially the truly non-coherent ones
  (like ARM), the difference can be easily noticed in overall driver
  performance.  Sadly not all architectures provide implementations for
  all of them, so the drivers might need to be adapted and cannot be
  easily shared between different architectures.  The provided patches
  unify all these functions and hide the differences under the already
  existing dma attributes concept.  The thread with more references is
  available here:

    http://www.spinics.net/lists/linux-sh/msg09777.html

  These patches are also a prerequisite for unifying DMA-mapping
  implementation on ARM architecture with the common one provided by
  dma_map_ops structure and extending it with IOMMU support.  More
  information is available in the following thread:

    http://thread.gmane.org/gmane.linux.kernel.cross-arch/12819

  More works on dma-mapping framework are planned, especially in the
  area of buffer sharing and managing the shared mappings (together with
  the recently introduced dma_buf interface: commit d15bd7ee
  "dma-buf: Introduce dma buffer sharing mechanism").

  The patches in the current set introduce a new alloc/free methods
  (with support for memory attributes) in dma_map_ops structure, which
  will later replace dma_alloc_coherent and dma_alloc_writecombine
  functions."

People finally started piping up with support for merging this, so I'm
merging it as the last of the pending stuff from the merge window.
Looks like pohmelfs is going to wait for 3.5 and more external support
for merging.

* 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  common: DMA-mapping: add NON-CONSISTENT attribute
  common: DMA-mapping: add WRITE_COMBINE attribute
  common: dma-mapping: introduce mmap method
  common: dma-mapping: remove old alloc_coherent and free_coherent methods
  Hexagon: adapt for dma_map_ops changes
  Unicore32: adapt for dma_map_ops changes
  Microblaze: adapt for dma_map_ops changes
  SH: adapt for dma_map_ops changes
  Alpha: adapt for dma_map_ops changes
  SPARC: adapt for dma_map_ops changes
  PowerPC: adapt for dma_map_ops changes
  MIPS: adapt for dma_map_ops changes
  X86 & IA64: adapt for dma_map_ops changes
  common: dma-mapping: introduce generic alloc() and free() methods

Pull more power management updates from Rafael Wysocki:
 - Patch series that hopefully fixes races between the freezer and
   request_firmware() and request_firmware_nowait() for good, with two
   cleanups from Stephen Boyd on top.
 - Runtime PM fix from Alan Stern preventing tasks from getting stuck
   indefinitely in the runtime PM wait queue.
 - Device PM QoS update from MyungJoo Ham introducing a new variant of
   pm_qos_update_request() allowing the callers to specify a timeout.

* tag 'pm-for-3.4-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: add pm_qos_update_request_timeout() API
  firmware_class: Move request_firmware_nowait() to workqueues
  firmware_class: Reorganize fw_create_instance()
  PM / Sleep: Mitigate race between the freezer and request_firmware()
  PM / Sleep: Move disabling of usermode helpers to the freezer
  PM / Hibernate: Disable usermode helpers right before freezing tasks
  firmware_class: Do not warn that system is not ready from async loads
  firmware_class: Split _request_firmware() into three functions, v2
  firmware_class: Rework usermodehelper check
  PM / Runtime: don't forget to wake up waitqueue on failure

Merge common_audit_data cleanup patches from Eric Paris.

This is really too late, but it's a long-overdue cleanup of the costly
wrapper functions for the security layer.

The "struct common_audit_data" is used all over in critical paths,
allocated and initialized on the stack.  And used to be much too large,
causing not only unnecessarily big stack frames but the clearing of the
(mostly useless) data was also very visible in profiles.

As a particular example, in one microbenchmark for just doing "stat()"
over files a lot, selinux_inode_permission() used 7% of the CPU time.
That's despite the fact that it doesn't actually *do* anything: it is
just a helper wrapper function in the selinux security layer.

This patch-series shrinks "struct common_audit_data" sufficiently that
code generation for these kinds of wrapper functions is improved
noticeably, and we spend much less time just initializing data that we
will never use.

The functions still get called all the time, and it still shows up at
3.5+% in my microbenchmark, but it's quite a bit lower down the list,
and much less noticeable.

* Emailed patches from Eric Paris <eparis@redhat.com>:
  lsm_audit: don't specify the audit pre/post callbacks in 'struct common_audit_data'
  SELinux: do not allocate stack space for AVC data unless needed
  SELinux: remove avd from slow_avc_audit()
  SELinux: remove avd from selinux_audit_data
  LSM: shrink the common_audit_data data union
  LSM: shrink sizeof LSM specific portion of common_audit_data

Pull a single regmap fix from Mark Brown:
 "A simple bug that's been lurking for a while but not terribly visible
  since a high proportion of chips have no register 0 so the normal
  failure is that we end up doing a bit of extra I/O."

* tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: rbtree: Fix register default look-up in sync

Pull regulator fixes from Mark Brown:
 "A bunch of smallish fixes that came up during the merge window as
  things got more testing - even more fixes from Axel, a fix for error
  handling in more complex systems using -EPROBE_DEFER and a couple of
  small fixes for the new dummy regulators."

* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Remove non-existent parameter from fixed-helper.c kernel doc
  regulator: Fix setting new voltage in s5m8767_set_voltage
  regulator: fix sysfs name collision between dummy and fixed dummy regulator
  regulator: Fix deadlock on removal of regulators with supplies
  regulator: Fix comments in include/linux/regulator/machine.h
  regulator: Only update [LDOx|DCx]_HIB_MODE bits in wm8350_[ldo|dcdc]_set_suspend_disable
  regulator: Fix setting low power mode for wm831x aldo
  regulator: Return microamps in wm8350_isink_get_current
  regulator: wm8350: Fix the logic to choose best current limit setting
  regulator: wm831x-isink: Fix the logic to choose best current limit setting
  regulator: wm831x-dcdc: Fix the logic to choose best current limit setting
  regulator: anatop: patching to device-tree property "reg".
  regulator: Do proper shift to set correct bit for DC[2|5]_HIB_MODE setting
  regulator: Fix restoring pmic.dcdcx_hib_mode settings in wm8350_dcdc_set_suspend_enable
  regulator: Fix unbalanced lock/unlock in mc13892_regulator_probe error path
  regulator: Fix set and get current limit for wm831x_buckv
  regulator: tps6586x: Fix list minimal voltage setting for LDO0

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/p4: Add format attributes
  tracing, sched, vfs: Fix 'old_pid' usage in trace_sched_process_exec()

Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kvm: Call restore_sched_clock_state() only after %gs is initialized
  x86: Use -mno-avx when available
  x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facility
  x86: Preserve lazy irq disable semantics in fixup_irqs()

Pull hwmon patches from Guenter Roeck:
 - Fix crash in ad7314 driver
 - Add support for AMD Trinity CPUs to k10temp driver
 - Fix __initdata/__initconst mixup in w83627ehf driver
 - Fix runtime warnings in acpi_power_meter and max6639 drivers
 - Fix build warnings in adm1031, f75375s, sht15, and gpio-fan drivers

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ad7314) Adds missing spi_dev initialization
  hwmon: (k10temp) Add support for AMD Trinity CPUs
  hwmon: (w83627ehf) mark const init data with __initconst instead of __initdata
  hwmon: (acpi_power_meter) fix lockdep spew due to non-static lock class
  hwmon: (adm1031) Fix compiler warning
  hwmon: (f75375s) Fix warning message seen in some configurations
  hwmon: (max6639) Convert to dev_pm_ops
  hwmon: (sht15) Fix Kconfig dependencies
  hwmon: (gpio-fan) Fix Kconfig dependencies

Pull MCE fixlet from Borislav Petkov:
 "One fix which makes MCE decoding much more "liberal" wrt families."

* tag 'mce-fix-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  MCE, AMD: Drop too granulary family model checks

Pull assorted md fixes from Neil Brown:
 - some RAID levels didn't clear up properly if md_integrity_register
  failed
 - a 'check' of RAID5/RAID6 doesn't actually read any data since a
   recent patch - so fix that (and mark for -stable)
 - a couple of other minor bugs.

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  md/raid1,raid10: don't compare excess byte during consistency check.
  md/raid5: Fix a bug about judging if the operation is syncing or replacing
  md/raid1:Remove unnecessary rcu_dereference(conf->mirrors[i].rdev).
  md: Avoid OOPS when reshaping raid1 to raid0
  md/raid5: fix handling of bad blocks during recovery.
  md/raid1: If md_integrity_register() failed,run() must free the mem
  md/raid0: If md_integrity_register() fails, raid0_run() must free the mem.
  md/linear: If md_integrity_register() fails, linear_run() must free the mem.

Pull ARM fixes from Russell King:
 "Nothing too big here, just small fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: fix more fallout from 9f97da78 (Disintegrate asm/system.h for ARM)
  ARM: fix bios32.c build warning
  ARM: 7337/1: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms
  ARM: fix missing bug.h include in arch/arm/kernel/insn.c
  ARM: sa11x0: fix build errors from DMA engine API updates

Pull Sparc fixes from David Miller:
 "One build regression and one serial probe regression fix on sparc."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  serial/sunzilog: fix keyboard on SUN SPARCstation
  sparc: pgtable_64: change include order

To fix:

  In file included from kernel/exit.c:61:
  arch/avr32/include/asm/mmu_context.h: In function 'enable_mmu':
  arch/avr32/include/asm/mmu_context.h:135: error: implicit declaration of function 'nop'

It needs an include of the new file created in commit ae473946
("Disintegrate asm/system.h for AVR32"), but since that file only
contains "nop", and since other arch already have precedent of putting
nop in asm/barrier.h we should just delete the new file and put nop in
barrier.h
Suggested-and-acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit d06221c0.

It turns out to trigger the "BUG_ON(!PageCompound(page))" in kfree(),
apparently because the code ends up trying to free somethng that was
never kmalloced in the first place.

BenH points out that the patch was untested and wasn't meant to go into
the upstream kernel that quickly in the first place.

Backtrace:
  bios_shadow
  bios_shadow_prom
  nv_mask
  init_io
  bios_shadow
  nouveau_bios_init
  NVReadVgaCrtc
  NVSetOwner
  nouveau_card_init
  nouveau_load
Reported-by: NMeelis Roos <mroos@linux.ee>
Requested-by: NDave Airlie <airlied@gmail.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

MCA details seldom change inbetween the models of a family so don't
be too conservative and enable decoding on everything starting from
K8 onwards. Minor adjustments can come in later but most importantly,
we have some decoding infrastructure in place for upcoming models by
default.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

The keyboard on my SUN SPARCstation 5 no longer worked.

    The culprint was: d4e33fac
    ("serial: Kill off NO_IRQ")

Fix up logic for no irq / irq so the keyboard works again.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code cleanup of cifs_parse_mount_options resulted in a new bug being
introduced in the parsing of the UNC. This results in vol->UNC being
modified before vol->UNC was allocated.
Reported-by: NSteve French <smfrench@gmail.com>
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

This driver was recently moved from IIO (where it worked) to hwmon (where
it doesn't.) This breakage occured because the hwmon version neglected to
correctly initialize a reference to spi_dev in its drvdata. The result is a
segfault every time the temperature is queried.
Signed-off-by: NGraeme Smecher <gsmecher@threespeedlogic.com>
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

The password parser has an unnecessary check for a NULL value which
triggers warnings in source checking tools. The code contains artifacts
from the old parsing code which are no longer required.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Pull drm update from Dave Airlie:
 "This pull just contains a forward of the Intel fixes from Daniel.

  The only annoyance is the RC6 enable, which really should have made
  -next, but since Ubuntu are shipping it I reckon its getting a good
  testing now by the time 3.4 comes out.

  The pull from Daniel contains his pull message to me:

    "A few patches for 3.4, major part is 3 regression fixes:
     - ppgtt broke hibernate on snb/ivb.  Somehow our QA claims that it
       still works, which is why this has not been caught earlier.
     - ppgtt flails in combination with dmar.  I kinda expected this one :(
     - fence handling bugfix for gen2/3.  Iirc this one is about a year
       old, fix curtesy Chris Wilson.  I've created an shockingly simple
       i-g-t test to catch this in the future."

     Wrt regressions I've just got a report that gmbus (newly enabled
     again in 3.4) is a bit noisy.  I'm looking into this atm.

     Also included are the rc6 enable patches for snb from Eugeni.  I
     wanted to include these in the main 3.4 pull but screwed it up.
     Please hit me.  Imo these kind of patches really should go in
     before -rc1, but in thise case rc6 has brought us tons of press and
     guinea pigs^W^W testers and ubuntu is already running with it.  So
     I estimate a pretty small chance for this to blow up.

     And some smaller things:
      - two minor locking snafus
      - server gt2 ivb pciid
      - 2 patches to sanitize the register state left behind by the bios
        some more
      - 2 new quirk entries
      - cs readback trick against missed IRQs from ivb also enabled on snb
      - sprite fix from Jesse"

Let's see if the "enable RC6 on sandybridge" finally works and sticks.
I've been enabling it by hand (i915.i915_enable_rc6=1) for several
months on my Macbook Air, and it definitely makes a difference (and has
worked for me).  But every time we enabled it before it showed some odd
hw buglet for *somebody*.

This time it's all good, I'm sure.

* 'drm-fixes-intel' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: treat src w & h as fixed point in sprite handling code
  drm/i915: no-lvds quirk on MSI DC500
  drm/i915: Add lock on drm_helper_resume_force_mode
  drm/i915: don't leak struct_mutex lock on ppgtt init failures
  drm/i915: disable ppgtt on snb when dmar is enabled
  drm/i915: add Ivy Bridge GT2 Server entries
  drm/i915: properly clear SSC1 bit in the pch refclock init code
  drm/i915: apply CS reg readback trick against missed IRQ on snb
  drm/i915: quirk away broken OpRegion VBT
  drm/i915: enable plain RC6 on Sandy Bridge by default
  drm/i915: allow to select rc6 modes via kernel parameter
  drm/i915: Mark untiled BLT commands as fenced on gen2/3
  drm/i915: properly restore the ppgtt page directory on resume
  drm/i915: Sanitize BIOS debugging bits from PIPECONF