- 17 11月, 2010 4 次提交
-
-
由 Benoit Cousson 提交于
Select the CBL package if SDP4430 is enabled during config. Initialize the mux framework during the board init. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
-
由 Benoit Cousson 提交于
Add data for OMAP4430 generated from HW pinout & register database. The data set is split in two partitions for both core and wkup. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
-
由 Benoit Cousson 提交于
Starting on OMAP4, the pin mux configuration is located in two different partitions of the control module (CODE_PAD and WKUP_PAD). The first one is inside the core power domain whereas the second one is inside the wakeup. - Add the capability to add any number of partition during board init time depending of Soc partitioning. - Add some init flags as well in order to avoid explicit Soc version check inside the mux core code. - Add a comment with mux0 mode on top of omap_mux/board/<partition> if the current mux mode is not the default one. Thanks to Tony Lindgren <tony@atomide.com> for the following improvements: - Add omap_mux_get for getting the partition data so platform level device code can use it. - Fix the rx51 board code to use the new API. - Do not store the partition for each mux entry. Look up the partition for debugfs instead. Thanks to Dan Murphy <dmurphy@ti.com> for testing on OMAP4 and reporting a couple of bugs. Thanks to Anand Gadiyar <gadiyar@ti.com> for testing on OMAP3 zoom and bug report. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Tested-by: NMurphy Dan <dmurphy@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
-
由 Benoit Cousson 提交于
Replace all the printk(KERN_XXX... with pr_xxx macros. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
-
- 15 11月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
Tested-by: NTony SIM <chinyeow.sim.xt@renesas.com> Tested-by: NTAKEI Mitsuharu <takei.andr@gmail.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 11月, 2010 3 次提交
-
-
由 Kukjin Kim 提交于
This patch fixes followng build warnings. warning: (ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> || ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>) selects HAVE_S3C_RTC which has unmet direct dependencies (RTC_CLASS) Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch fixes following warnings. warning: (ARCH_S3C2410 && <choice> || ARCH_S3C64XX && <choice> || ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> || ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>) selects HAVE_S3C2410_I2C which has unmet direct dependencies (I2C) Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
Fix build warnings warning: (ARCH_S3C64XX && <choice> && WATCHDOG || ARCH_S5P64X0 && <choice> && WATCHDOG || ARCH_S5P6442 && <choice> && WATCHDOG || ARCH_S5PC100 && <choice> || ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice> || MACH_SMDK6410 && ARCH_S3C64XX) selects HAVE_S3C2410_WATCHDOG which has unmet direct dependencies (WATCHDOG) Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: Added fix same warning(mach-s3c64xx/Kconfig)] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 11月, 2010 3 次提交
-
-
由 Richard Weinberger 提交于
Both commits 0a3d763f ("ptrace: cleanup arch_ptrace() on um") and 9b05a69e ("ptrace: change signature of arch_ptrace()") broke the um build. This patch fixes the issues. 0a3d763f introduced the undeclared variable "datavp". The patch seems completely untested. :-( 9b05a69e changed arch_ptrace()'s signature but did not update um/include/asm/ptrace-generic.h. Signed-off-by: NRichard Weinberger <richard@nod.at> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Tested-by: NWill Newton <will.newton@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Software generated interrupts (SGI) are used for IPIs by the kernel. While previous revisions of the GIC hardware were specified not to implement enable bits for SGIs, more recent hardware is now permitted to implement these bits in a per-CPU banked register. The priority registers for the PPI and SGIs are also per-CPU banked registers, so ensure that these are also appropriately initialized. Reported-by: NScott Valentine <svalentine@concentris-systems.com> Acked-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bjorn Helgaas 提交于
Some BIOSes provide PCI host bridge windows that overlap, e.g., pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xffffffff] If we simply insert these as children of iomem_resource, the second window fails because it conflicts with the first, and the third is inserted as a child of the first, i.e., b0000000-ffffffff PCI Bus 0000:00 f0000000-ffffffff PCI Bus 0000:00 When we claim PCI device resources, this can cause collisions like this if we put them in the first window: pci 0000:00:01.0: address space collision: [mem 0xff300000-0xff4fffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xffffffff] Host bridge windows are top-level resources by definition, so it doesn't make sense to make the third window a child of the first. This patch coalesces any host bridge windows that overlap. For the example above, the result is this single window: pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xffffffff] This fixes a 2.6.34 regression. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=17011Reported-and-tested-by: NAnisse Astier <anisse@astier.eu> Reported-and-tested-by: NPramod Dematagoda <pmd.lotr.gandalf@gmail.com> Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 11 11月, 2010 3 次提交
-
-
由 Ian Campbell 提交于
We already deliberately setup a 1-1 P2M for the region up to 1M in order to allow code which assumes this region is already mapped to work without having to convert everything to ioremap. Domain 0 should not return any apparently unused memory regions (reserved or otherwise) in this region to Xen since the e820 may not accurately reflect what the BIOS has stashed in this region. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Felipe Contreras 提交于
Also, don't be picky about the location, which incidentally fixes the build since MEMBLOCK_REAL_LIMIT is gone on 2.6.37. arch/arm/plat-omap/devices.c: In function 'omap_dsp_reserve_sdram_memblock': arch/arm/plat-omap/devices.c:287: error: 'MEMBLOCK_REAL_LIMIT' undeclared (first use in this function) Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NOmar Ramirez Luna <omar.ramirez@ti.com>
-
由 Peter Zijlstra 提交于
Jasper suggested we use the zeroing capability of the allocators instead of calling memset ourselves. Add node affinity while we're at it. Reported-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 11月, 2010 7 次提交
-
-
由 Will Deacon 提交于
In commit bde28b84, I made the assumption that CONFIG_SMP is always set for the quad-core ct-ca9x4 platform. As it turns out, people who aren't using the SMP goodness are confronted with a build failure. This patch fixes this issue by ensure that twd_base is only set if local timers are being used (and therefore SMP support is configured). Reported-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Kusanagi Kouichi 提交于
Commit 92580d64e16402762e2acc3022f065397c780425 ("x86: pvclock: Move scale_delta into common header") forgot to remove scale_delta. Signed-off-by: NKusanagi Kouichi <slash@ac.auone-net.jp> Cc: Zachary Amsden <zamsden@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Glauber Costa <glommer@redhat.com> LKML-Reference: <20101105110444.BAF6D6FC03B@msa105.auone-net.jp> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jesper Juhl 提交于
Remove the second <asm/atomic.h> inclusion. Signed-off-by: NJesper Juhl <jj@chaosbits.net> LKML-Reference: <alpine.LNX.2.00.1011072253360.26247@swampdragon.chaosbits.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
check_enable_amd_mmconf_dmi() gets called only for the BSP, hence everything hanging off of it can be __init*. Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4CD2DE1E0200007800020990@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jack Steiner 提交于
A new version of the SGI UV hub node controller is being developed. A few of the MMRs (control registers) that exist on the current hub no longer exist on the new hub. Fortunately, there are alternate MMRs that are are functionally equivalent and that exist on both hubs. This patch changes the UV code to use MMRs that exist in BOTH versions of the hub node controller. Signed-off-by: NJack Steiner <steiner@sgi.com> LKML-Reference: <20101106204056.GA27584@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jesper Juhl 提交于
The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from arch/x86. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Cc: trivial@kernel.org Cc: amd64-microcode@amd64.org Cc: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <alpine.LNX.2.00.1011082310220.23697@swampdragon.chaosbits.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
native_apic_msr_read() and x2apic_enabled() use rdmsr(msr, low, high), but only use the low part. gcc4.6 complains about this: .../apic.h:144:11: warning: variable 'high' set but not used [-Wunused-but-set-variable] rdmsr() is just a wrapper around rdmsrl() which splits the 64bit value into low and high, so using rdmsrl() directly solves this. [tglx: Changed the variables to u64 as suggested by Cyrill. It's less confusing and has no code impact as this is 64bit only anyway. Massaged changelog as well. ] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: x86@kernel.org Cc: Cyrill Gorcunov <gorcunov@gmail.com> LKML-Reference: <1289251229-19589-1-git-send-email-andi@firstfloor.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 09 11月, 2010 2 次提交
-
-
由 Felipe Balbi 提交于
Get rid of the following warning: arch/arm/mach-omap1/devices.c: In function 'omap_init_wdt': arch/arm/mach-omap1/devices.c:298: warning: 'return' with no value, in function returning non-void while at that, also change: platform_device_register(); return 0; into: return platform_device_register(); Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jiri Slaby 提交于
Stanse found that xen_setup_msi_irqs leaks memory when xen_allocate_pirq fails. Free the memory in that fail path. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xensource.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org
-
- 08 11月, 2010 10 次提交
-
-
由 Yusuke Goda 提交于
This makes the loader and bootenv partitions read-only under MTD for the on-board NOR flash. Signed-off-by: NYusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Tony SIM 提交于
Signed-off-by: NTony SIM <chinyeow.sim.xt@renesas.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
These clocks are currently only used inside one .c file and are not declared in any headers, therefore having them global is useless. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Joe Perches 提交于
Message isn't printed by WARN_ON. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ryan Mallon 提交于
Add kernel-doc documentation for the EP93xx DMA memory to peripheral/peripheral to memory API. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> Acked-by: NMika Westerberg <mika.westerberg@iki.fi> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
The old apcs-gnu ABI doesn't guarantee that double words are allocated to registers with even alignment, causing the 64-bit exclusive memory operations to be rejected by the assembler. This patch requires that CONFIG_AEABI is set in order to use the native atomic operations and falls back to the generic (spinlock) code otherwise. Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
armv7_pmnc_counter_has_overflowed can return uninitialised data if an invalid counter is specified. This patch fixes the code to return 0 in this case, which squashes the compiler warning from GCC 4.5. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
When unwinding stack frames we must take care not to unwind areas of memory that lie outside of the known extent of the stack. This patch fixes an incorrect calculation of the stack base where THREAD_SIZE is added to the stack pointer after it has already been aligned to this value. Since the ALIGN macro performs this addition internally, we end up overshooting the base by 8k. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
An out by one bug meant that the DMA coherent allocator was aligning to one more bit than it should, causing it to run out of available memory quicker. Fix this. Reported-by: NPetr Štetiar <ynezz@true.cz> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 06 11月, 2010 7 次提交
-
-
由 Janusz Krzysztofik 提交于
#include <media/omap1_camera.h> directive is required to compile the dependant boards (board-ams-delta for now). Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: updated comments] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Mathias Nyman 提交于
Flush the writes to IRQSTATUS_L0 register in the DMA interrupt handler by reading the register directly after write. This prevents the spurious DMA interrupts noted when using VDD_OPP 1 Signed-off-by: NMathias Nyman <mathias.nyman@nokia.com> Acked-by: NSantosh Shilimkar <Santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Thomas Weber 提交于
This patch fixes the following error: >regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby >twl_reg twl_reg.6: can't register VMMC1, -22 >twl_reg: probe of twl_reg.6 failed with error -22 Signed-off-by: NThomas Weber <weber@corscience.de> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Mike Rapoport 提交于
Wrong MPP configuration would cause <cpu>_mpp_conf loop infinitely because the mpp list iterator would not be incremented. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Michael Spang 提交于
The type was IORESOURCE_IO which is not what is expected by plat_nand_probe(). This device has not worked since 2d098a72 ("mtd: plat_nand: request memory resource before doing ioremap"). Signed-off-by: NMichael Spang <mspang@csclub.uwaterloo.ca> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Scott Wood 提交于
This was preventing the guest from setting any bits in the hardware MSR which aren't forced on, such as MSR[SPE]. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
It is not legal to call mutex_lock() with interrupts disabled. This will assert with debug checks enabled. If there's a real need to disable interrupts here, it could be done after the mutex is acquired -- but I don't see why it's needed at all. Signed-off-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-