buf was allocated by kzalloc() so it should be passed to kfree()
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When num_kcontrols is zero, widget->dobj.widget.kcontrol_type
gets set to an uninitialized local variable:

sound/soc/soc-topology.c: In function 'soc_tplg_dapm_widget_create':
sound/soc/soc-topology.c:1566:36: error: 'kcontrol_type' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I could not figure out which of the valid types would be appropriate
here, so this sets it to '0', which is invalid but at least well-defined
here. There is probably a better way to address the issue.

Fixes: eea3dd4f ("ASoC: topology: Only free TLV for volume mixers of a widget")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver setups BRGCKR/BRRA/BRRB when .probe timing.
But it breaks sound after Suspend/Resume. These should be setups
every start timing.
This patch is tested on R-Car Gen3 Salvator-X board
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NGaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver enables ADG clock when .probe timing,
but it breaks sound after Suspend/Resume. These should be setups
every suspend/resume timing too.
This patch is tested on R-Car Gen3 Salvator-X board
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NGaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

ssi->usrcnt will be updated on snd_soc_dai_ops::trigger,
but snd_pcm_ops::hw_params will be called *before* it.
Thus, ssi->usrcnt is still 0 when 1st call.
rsnd_ssi_hw_params() needs to check its called count, this means
trigger should be if (ssi->usrcnt) instead of if (ssi->usrcnt > 1).
Reported-by: NNguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch updates FE channel constraints & BE fixup to support
quad channel DMIC capture.
DMIC pin's BE fixup is configured based on channel input, i.e.
either stereo or quad.
Signed-off-by: NSathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: NHarsha Priya <harshapriya.n@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This bit will enable 4th order SINC filter.
=1, filter will enable;  but it consumes higher power.
=0, the sinc filter is disable, and it should always keep 0 value to
get high THD.

Therefor, disable the filter when codec initiation for better
performance when recording.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The logic of "value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_XXXXXX;" is
unnecessary complex. By setting CS35L34_MCLK_DIV | CS35L34_MCLK_RATE_MASK
as the mask for regmap_update_bits() call, what the code does is exactly
the same as setting value = CS35L34_MCLK_RATE_XXXXXX.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NPaul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

After the boot of the SST FW the firmware version is send back
to the driver. This patch is saving the FW version inside the
driver.
Signed-off-by: NSebastien Guiriec <sebastien.guiriec@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch is adding a sysfs entry in order to be able to get
access to SST FW version.
Signed-off-by: NSebastien Guiriec <sebastien.guiriec@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k)
and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform
(mask & 1), which results in 0 if LSB of mask is 0. Thus the call
regmap_update_bits(..., mask, 1) is in reality equivalent to
regmap_update_bits(..., mask, 0).

In such a case, the correct use is regmap_update_bits(..., mask, mask).

This driver is performing such a mistake with the CS42L56_AIN*_REF_MASK
masks, which equal 0x10, 0x20, 0x40 and 0x80. Fix the driver to make it
consistent with the API. Please note that this change is untested,
as I do not have this piece of hardware. Testers are welcome!
Signed-off-by: NFlorian Vaussard <florian.vaussard@heig-vd.ch>
Reviewed-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: NBrian Austin <brian.austin@cirrus.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch will check the type of embedded controls for a widget, and
only free the TLV of volume mixers. Bytes controls don't have TLV.

Just free the private value which is used as struct soc_mixer_control
for volume mixers or soc_bytes_ext for bytes controls. No need to cast
to these types before freeing it.
Signed-off-by: NMengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch can create multiple enumerated mixer controls for a widget.

Previously topology kernel driver assumes a widget can have only one
emumerated mixer control. We need to remove this restriction for Broxton.
Its firmware modules (widgets) may need multiple enum controls based on
the channel and MIC combination.

No ABI change is needed. The ABI allows a widget to embed multiple
controls.
Reported-by: NG Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: NMengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

simple_card_utils was created as simple_card_core in 1st prototype,
and current code still have it. Let's tidyup
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SSIU was controlled by SSI before, but
commit c7f69ab5("ASoC: rsnd: use mod base common method on SSIU")
separated it into ssiu.c

But, it didn't care about rsnd_get_dalign() for judging SSI_BUSIF_DALIGN
register value which changes the stream data order.
This function will be called from cmd/src/ssiu now, but current code
still cares ssi, not ssiu.
This patch fix it up
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds the sound machine driver for the TM2 and TM2E boards.
Speaker and headphone playback, Main Mic capture, Bluetooth, Voice
call and external accessory are supported.
Signed-off-by: NInha Song <ideal.song@samsung.com>
[k.kozlowski: rebased on 4.1]
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
[s.nawrocki: rebased to 4.7, adjustment to the ASoC core changes,
 removed unused ops and direct calls to the max98504 function,
 added parsing of "audio-amplifier" and "audio-codec"
 properties, added TDM API calls, switched to gpiod API]
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In current ALSA SoC, Codec only has suspend/resume feature,
but it should be supported on Component level. This patch adds it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Now, Card has component_dev_list, we can replace aux_comp_list
to component_dev_list with new auxiliary flags
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current Card has Codec list (= codec_dev_list), but Codec will be
removed in the future. Because of this reason, this patch adds
new Component list in Card, and replace Codec list.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The codec on the H3 is similar to the one found on the A31. One key
difference is the analog path controls are routed through the PRCM
block. This is supported by the sun8i-codec-analog driver, and tied
into this codec driver with the audio card's aux_dev.

In addition, the H3 has no HP (headphone) and HBIAS support, and no
MIC3 input. The FIFO related registers are slightly rearranged.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The codec in the A23 is similar to the one found on the A31. One key
difference is the analog path controls are routed through the PRCM
block. This is supported by the sun8i-codec-analog driver, and tied
into this codec driver with the audio card's aux_dev.

In addition, the A23 does not have LINEOUT, and it does not support
headset jack detection or buttons.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Instead of hard-coded "i2c-10EC5670:00", use the translation helper to
avoid the mismatch between i2c-codec and ACPI strings just like what
we've done for bytcr_rt5640.  This gives more robust binding on funky
devices like Dell Wyse 3040.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When ASoC Intel SST Medfield driver is probed but without codec / card
assigned, it causes an Oops and freezes the kernel at suspend/resume,

 PM: Suspending system (freeze)
 Suspending console(s) (use no_console_suspend to debug)
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
 IP: [<ffffffffc09d9409>] sst_soc_prepare+0x19/0xa0 [snd_soc_sst_mfld_platform]
 Oops: 0000 [#1] PREEMPT SMP
 CPU: 0 PID: 1552 Comm: systemd-sleep Tainted: G W 4.9.0-rc6-1.g5f5c2ad-default #1
 Call Trace:
  [<ffffffffb45318f9>] dpm_prepare+0x209/0x460
  [<ffffffffb4531b61>] dpm_suspend_start+0x11/0x60
  [<ffffffffb40d3cc2>] suspend_devices_and_enter+0xb2/0x710
  [<ffffffffb40d462e>] pm_suspend+0x30e/0x390
  [<ffffffffb40d2eba>] state_store+0x8a/0x90
  [<ffffffffb43c670f>] kobj_attr_store+0xf/0x20
  [<ffffffffb42b0d97>] sysfs_kf_write+0x37/0x40
  [<ffffffffb42b02bc>] kernfs_fop_write+0x11c/0x1b0
  [<ffffffffb422be68>] __vfs_write+0x28/0x140
  [<ffffffffb43728a8>] ? apparmor_file_permission+0x18/0x20
  [<ffffffffb433b2ab>] ? security_file_permission+0x3b/0xc0
  [<ffffffffb422d095>] vfs_write+0xb5/0x1a0
  [<ffffffffb422e3d6>] SyS_write+0x46/0xa0
  [<ffffffffb4719fbb>] entry_SYSCALL_64_fastpath+0x1e/0xad

Add proper NULL checks in the PM code of mdfld driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>

There is an issue about pop noise in NAU88L25 as follows.
Issue 54078: Chell_headphone pop back from S3
(1)Play directly to hw, bypassing CRAS:
sox -b 16 -n -t alsa hw:0,0 synth sine 200 sine 200
(2)Close lid or powerd_dbus_suspend, then press a key to resume.
(3)no audio after resume
(4)Audio will be back after close then reopen the pcm device.

After verification, we find one defect is that semaphone lock is not
long enough and expired. In this situation, the playback comes back
early but pauses a while to wait for the crosstalk detection done.
But the detection spends too much time and lock time is up. Therefore,
the playback and jack detection sequence interfere to each other.
That breaks sequence and makes noise. The driver extends the lock
time for the issue.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The usage pattern of kthread worker in Intel SST drivers can be
replaced gracefully with the normal workqueue, which is more light-
weight and easier to manage in general.  Let's do it.

While in the replacement, move the schedule_work() call inside the
spinlock for excluding the race, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Tested-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We need to modify the state of some of our own pins and are currently
not taking account that the pin name may have a name_prefix applied
to it.

Replace the snd_soc_dapm_x_pin functions with the equivalent
snd_soc_component_x_pin functions so that any name_prefix will be
handled automatically.
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

It's often the case that a codec driver will need to control its
own pins. However, if a name_prefix has been applied to this codec it
must be included in the name passed to any of the snd_soc_dapm_x_pin()
functions.

The behaviour of the existing pin control functions is reasonable, since
you may want to search for a fully-specified name within the scope of an
entire card. This means that we can't apply the prefix in these functions
because it will break card-scope searches.

Constructing a prefixed string "manually" in codec drivers leads to a lot
of repetition of the same code.

To make this tidier in codec drivers this patch adds a new set of
equivalent functions that take a struct snd_soc_component instead of a
dapm context and automatically add the component's name_prefix to the
given name. This makes it a simple change in codec drivers to be
prefix-safe.

The new functions are not quite trivial enough to be inlines and the
compiler won't be able to compile-away any part of them.

Although it looks somewhat inefficient to have to allocate a temporary
buffer and combine strings, the current design of the widget list
doesn't lend itself to a more optimized implementation - it's a single
list of all widgets on a card and is searched linearly for a matching
string. As pin state changes are generally low-frequency events it's
unlikely to be a significant issue - at least not enough to rewrite the
widget list handling just for this.
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rt5670 driver supports also RT5672 codec, but its ACPI ID is missing.
This was found on Dell Wyse 3040 box.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Dell Wyse 3040 requires the platform workaround for enabling dmic and
jack detection as defined for Braswell CRB.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add the missing ACPI ID 10EC5672 for Cherry Trail, which bounds with
cht-bsw-rt5672 driver.  This combination was found on Dell Wyse 3040.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Disable IRQ when jack is NULL in rt298_mic_detect. So machine driver
can use it in suspend/resume.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Reviewed-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Intel sst driver spews lots of kernel messages in INFO level;
typically, it gives a kernel message at each time it allocates or
frees a stream, or at each time when a stream is started or stopped.
This will piles up quickly, and it's almost useless for normal users,
so let's hide them to KERN_DEBUG level.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Functions are given external linkage by default making the extern's
unnecessary, as such remove them.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Functions are given external linkage by default making the extern's
unnecessary, as such remove them.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Now that I2S conflig blob structure is no longer in use, remove it.
Signed-off-by: NGuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

I2S blob config structure can change between DSP copier module versions.
We are not modifying these structures anyway and NHLT blobs specify them
properly, so use the blob directly to send the dma_control ipc instead
of using the predefined I2S blob config structure.
Signed-off-by: NGuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Oddly enough, my version of GCC misses this uninitialized variable.

Fixes: ba2ff302 ("ASoC: sunxi: Add support for A23/A33/H3 codec's analog path controls")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Fields of structs with global storage are implicitly initialized to 0/NULL,
there is usually no need to do this explicitly.

Removing the initialization of the legacy suspend/resume callback fields
also gets the driver ready for the day when they are eventually removed.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Resources should be requested when the device is probed on the control bus
rather then when the CODEC is bound to the sound card. This allows things
like probe deferring and device managed allocations to work.

So move the GPIO request calls from the CODEC probe to the bus probe and
also make them managed along the way.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

The DAI ID defines are back from the time when DAIs were referenced by a
numerical ID. These days a string is used for matching instead and the
defines are unused. The last user of these defines was removed in commit
f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support"). So
remove the defines as well.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>