A PTE is constructed from a physical address and a pgprotval_t.
__PAGE_KERNEL, for instance, is a pgprot_t and must be converted
into a pgprotval_t before it can be used to create a PTE.  This is
done implicitly within functions like pfn_pte() by massage_pgprot().

However, this makes it very challenging to set bits (and keep them
set) if your bit is being filtered out by massage_pgprot().

This moves the bit filtering out of pfn_pte() and friends.  For
users of PAGE_KERNEL*, filtering will be done automatically inside
those macros but for users of __PAGE_KERNEL*, they need to do their
own filtering now.

Note that we also just move pfn_pte/pmd/pud() over to check_pgprot()
instead of massage_pgprot().  This way, we still *look* for
unsupported bits and properly warn about them if we find them.  This
might happen if an unfiltered __PAGE_KERNEL* value was passed in,
for instance.

- printk format warning fix from: Arnd Bergmann <arnd@arndb.de>
- boot crash fix from:            Tom Lendacky <thomas.lendacky@amd.com>
- crash bisected by:              Mike Galbraith <efault@gmx.de>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reported-and-fixed-by: NArnd Bergmann <arnd@arndb.de>
Fixed-by: NTom Lendacky <thomas.lendacky@amd.com>
Bisected-by: NMike Galbraith <efault@gmx.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205509.77E1D7F6@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The "normal" kernel page table creation mechanisms using
PAGE_KERNEL_* page protections will never set _PAGE_GLOBAL with PTI.
The few places in the kernel that always want _PAGE_GLOBAL must
avoid using PAGE_KERNEL_*.

Document that we want it here and its use is not accidental.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205507.BCF4D4F0@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The __PAGE_KERNEL_* page permissions are "raw".  They contain bits
that may or may not be supported on the current processor.  They need
to be filtered by a mask (currently __supported_pte_mask) to turn them
into a value that we can actually set in a PTE.

These __PAGE_KERNEL_* values all contain _PAGE_GLOBAL.  But, with PTI,
we want to be able to support _PAGE_GLOBAL (have the bit set in
__supported_pte_mask) but not have it appear in any of these masks by
default.

This patch creates a new mask, __default_kernel_pte_mask, and applies
it when creating all of the PAGE_KERNEL_* masks.  This makes
PAGE_KERNEL_* safe to use anywhere (they only contain supported bits).
It also ensures that PAGE_KERNEL_* contains _PAGE_GLOBAL on PTI=n
kernels but clears _PAGE_GLOBAL when PTI=y.

We also make __default_kernel_pte_mask a non-GPL exported symbol
because there are plenty of driver-available interfaces that take
PAGE_KERNEL_* permissions.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205506.030DB6B6@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When clearing _PAGE_PRESENT on a huge page, we need to be careful
to also clear _PAGE_PSE, otherwise it might still get confused
for a valid large page table entry.

We do that near the spot where we *set* _PAGE_PSE.  That's fine,
but it's unnecessary.  pgprot_large_2_4k() already did it.

BTW, I also noticed that pgprot_large_2_4k() and
pgprot_4k_2_large() are not symmetric.  pgprot_large_2_4k() clears
_PAGE_PSE (because it is aliased to _PAGE_PAT) but
pgprot_4k_2_large() does not put _PAGE_PSE back.  Bummer.

Also, add some comments and change "promote" to "move".  "Promote"
seems an odd word to move when we are logically moving a bit to a
lower bit position.  Also add an extra line return to make it clear
to which line the comment applies.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205504.9B0F44A9@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The pageattr code has a pattern repeated where it sets _PAGE_GLOBAL
for present PTEs but clears it for non-present PTEs.  The intention
is to keep _PAGE_GLOBAL from getting confused with _PAGE_PROTNONE
since _PAGE_GLOBAL is for present PTEs and _PAGE_PROTNONE is for
non-present

But, this pattern makes no sense.  Effectively, it says, if you use
the pageattr code, always set _PAGE_GLOBAL when _PAGE_PRESENT.
canon_pgprot() will clear it if unsupported (because it masks the
value with __supported_pte_mask) but we *always* set it. Even if
canon_pgprot() did not filter _PAGE_GLOBAL, it would be OK.
_PAGE_GLOBAL is ignored when CR4.PGE=0 by the hardware.

This unconditional setting of _PAGE_GLOBAL is a problem when we have
PTI and non-PTI and we want some areas to have _PAGE_GLOBAL and some
not.

This updated version of the code says:
1. Clear _PAGE_GLOBAL when !_PAGE_PRESENT
2. Never set _PAGE_GLOBAL implicitly
3. Allow _PAGE_GLOBAL to be in cpa.set_mask
4. Allow _PAGE_GLOBAL to be inherited from previous PTE
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205502.86E199DA@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

For non-paranoid entries, idtentry knows how to switch from the
kernel stack to the user stack, as does error_entry.  This results
in pointless duplication and code bloat.  Make idtentry stop
thinking about stacks for non-paranoid entries.

This reduces text size by 5377 bytes.

This goes back to the following commit:

  7f2590a1 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/90aab80c1f906e70742eaa4512e3c9b5e62d59d4.1522794757.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Consistently use types provided by <linux/types.h> to fix the following
asm/bootparam.h userspace compilation errors:

	/usr/include/asm/bootparam.h:140:2: error: unknown type name 'u16'
	  u16 version;
	/usr/include/asm/bootparam.h:141:2: error: unknown type name 'u16'
	  u16 compatible_version;
	/usr/include/asm/bootparam.h:142:2: error: unknown type name 'u16'
	  u16 pm_timer_address;
	/usr/include/asm/bootparam.h:143:2: error: unknown type name 'u16'
	  u16 num_cpus;
	/usr/include/asm/bootparam.h:144:2: error: unknown type name 'u64'
	  u64 pci_mmconfig_base;
	/usr/include/asm/bootparam.h:145:2: error: unknown type name 'u32'
	  u32 tsc_khz;
	/usr/include/asm/bootparam.h:146:2: error: unknown type name 'u32'
	  u32 apic_khz;
	/usr/include/asm/bootparam.h:147:2: error: unknown type name 'u8'
	  u8 standard_ioapic;
	/usr/include/asm/bootparam.h:148:2: error: unknown type name 'u8'
	  u8 cpu_ids[255];
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Cc: <stable@vger.kernel.org> # v4.16
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4a362601 ("x86/jailhouse: Add infrastructure for running in non-root cell")
Link: http://lkml.kernel.org/r/20180405043210.GA13254@altlinux.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull EFI updates from Ingo Molnar:
 "The main EFI changes in this cycle were:

   - Fix the apple-properties code (Andy Shevchenko)

   - Add WARN() on arm64 if UEFI Runtime Services corrupt the reserved
     x18 register (Ard Biesheuvel)

   - Use efi_switch_mm() on x86 instead of manipulating %cr3 directly
     (Sai Praneeth)

   - Fix early memremap leak in ESRT code (Ard Biesheuvel)

   - Switch to L"xxx" notation for wide string literals (Ard Biesheuvel)

   - ... plus misc other cleanups and bugfixes"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3
  x86/efi: Replace efi_pgd with efi_mm.pgd
  efi: Use string literals for efi_char16_t variable initializers
  efi/esrt: Fix handling of early ESRT table mapping
  efi: Use efi_mm in x86 as well as ARM
  efi: Make const array 'apple' static
  efi/apple-properties: Use memremap() instead of ioremap()
  efi: Reorder pr_notice() with add_device_randomness() call
  x86/efi: Replace GFP_ATOMIC with GFP_KERNEL in efi_query_variable_store()
  efi/arm64: Check whether x18 is preserved by runtime services calls
  efi/arm*: Stop printing addresses of virtual mappings
  efi/apple-properties: Remove redundant attribute initialization from unmarshal_key_value_pairs()
  efi/arm*: Only register page tables when they exist

Pull x86 dma mapping updates from Ingo Molnar:
 "This tree, by Christoph Hellwig, switches over the x86 architecture to
  the generic dma-direct and swiotlb code, and also unifies more of the
  dma-direct code between architectures. The now unused x86-only
  primitives are removed"

* 'x86-dma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dma-mapping: Don't clear GFP_ZERO in dma_alloc_attrs
  swiotlb: Make swiotlb_{alloc,free}_buffer depend on CONFIG_DMA_DIRECT_OPS
  dma/swiotlb: Remove swiotlb_{alloc,free}_coherent()
  dma/direct: Handle force decryption for DMA coherent buffers in common code
  dma/direct: Handle the memory encryption bit in common code
  dma/swiotlb: Remove swiotlb_set_mem_attributes()
  set_memory.h: Provide set_memory_{en,de}crypted() stubs
  x86/dma: Remove dma_alloc_coherent_gfp_flags()
  iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()
  iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}()
  x86/dma/amd_gart: Use dma_direct_{alloc,free}()
  x86/dma/amd_gart: Look at dev->coherent_dma_mask instead of GFP_DMA
  x86/dma: Use generic swiotlb_ops
  x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y)
  x86/dma: Remove dma_alloc_coherent_mask()

Pull wait_var_event updates from Ingo Molnar:
 "This introduces the new wait_var_event() API, which is a more flexible
  waiting primitive than wait_on_atomic_t().

  All wait_on_atomic_t() users are migrated over to the new API and
  wait_on_atomic_t() is removed. The migration fixes one bug and should
  result in no functional changes for the other usecases"

* 'sched-wait-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/wait: Improve __var_waitqueue() code generation
  sched/wait: Remove the wait_on_atomic_t() API
  sched/wait, arch/mips: Fix and convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait, fs/ocfs2: Convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait, fs/fscache: Convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait, fs/btrfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait, fs/afs: Convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait, drivers/media: Convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API
  sched/wait: Introduce wait_var_event()

Pull x86 timer updates from Ingo Molnar:
 "Two changes: add the new convert_art_ns_to_tsc() API for upcoming
  Intel Goldmont+ drivers, and remove the obsolete rdtscll() API"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Get rid of rdtscll()
  x86/tsc: Convert ART in nanoseconds to TSC

Pull x86 platform updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Add "Jailhouse" hypervisor support (Jan Kiszka)

   - Update DeviceTree support (Ivan Gorinov)

   - Improve DMI date handling (Andy Shevchenko)"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/PCI: Fix a potential regression when using dmi_get_bios_year()
  firmware/dmi_scan: Uninline dmi_get_bios_year() helper
  x86/devicetree: Use CPU description from Device Tree
  of/Documentation: Specify local APIC ID in "reg"
  MAINTAINERS: Add entry for Jailhouse
  x86/jailhouse: Allow to use PCI_MMCONFIG without ACPI
  x86: Consolidate PCI_MMCONFIG configs
  x86: Align x86_64 PCI_MMCONFIG with 32-bit variant
  x86/jailhouse: Enable PCI mmconfig access in inmates
  PCI: Scan all functions when running over Jailhouse
  jailhouse: Provide detection for non-x86 systems
  x86/devicetree: Fix device IRQ settings in DT
  x86/devicetree: Initialize device tree before using it
  pci: Simplify code by using the new dmi_get_bios_year() helper
  ACPI/sleep: Simplify code by using the new dmi_get_bios_year() helper
  x86/pci: Simplify code by using the new dmi_get_bios_year() helper
  dmi: Introduce the dmi_get_bios_year() helper function
  x86/platform/quark: Re-use DEFINE_SHOW_ATTRIBUTE() macro
  x86/platform/atom: Re-use DEFINE_SHOW_ATTRIBUTE() macro

Pull x86 mm updates from Ingo Molnar:

 - Extend the memmap= boot parameter syntax to allow the redeclaration
   and dropping of existing ranges, and to support all e820 range types
   (Jan H. Schönherr)

 - Improve the W+X boot time security checks to remove false positive
   warnings on Xen (Jan Beulich)

 - Support booting as Xen PVH guest (Juergen Gross)

 - Improved 5-level paging (LA57) support, in particular it's possible
   now to have a single kernel image for both 4-level and 5-level
   hardware (Kirill A. Shutemov)

 - AMD hardware RAM encryption support (SME/SEV) fixes (Tom Lendacky)

 - Preparatory commits for hardware-encrypted RAM support on Intel CPUs.
   (Kirill A. Shutemov)

 - Improved Intel-MID support (Andy Shevchenko)

 - Show EFI page tables in page_tables debug files (Andy Lutomirski)

 - ... plus misc fixes and smaller cleanups

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  x86/cpu/tme: Fix spelling: "configuation" -> "configuration"
  x86/boot: Fix SEV boot failure from change to __PHYSICAL_MASK_SHIFT
  x86/mm: Update comment in detect_tme() regarding x86_phys_bits
  x86/mm/32: Remove unused node_memmap_size_bytes() & CONFIG_NEED_NODE_MEMMAP_SIZE logic
  x86/mm: Remove pointless checks in vmalloc_fault
  x86/platform/intel-mid: Add special handling for ACPI HW reduced platforms
  ACPI, x86/boot: Introduce the ->reduced_hw_early_init() ACPI callback
  ACPI, x86/boot: Split out acpi_generic_reduce_hw_init() and export
  x86/pconfig: Provide defines and helper to run MKTME_KEY_PROG leaf
  x86/pconfig: Detect PCONFIG targets
  x86/tme: Detect if TME and MKTME is activated by BIOS
  x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G
  x86/boot/compressed/64: Use page table in trampoline memory
  x86/boot/compressed/64: Use stack from trampoline memory
  x86/boot/compressed/64: Make sure we have a 32-bit code segment
  x86/mm: Do not use paravirtualized calls in native_set_p4d()
  kdump, vmcoreinfo: Export pgtable_l5_enabled value
  x86/boot/compressed/64: Prepare new top-level page table for trampoline
  x86/boot/compressed/64: Set up trampoline memory
  x86/boot/compressed/64: Save and restore trampoline memory
  ...

Pull x86 cleanups and msr updates from Ingo Molnar:
 "The main change is a performance/latency improvement to /dev/msr
  access. The rest are misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/msr: Make rdmsrl_safe_on_cpu() scheduling safe as well
  x86/cpuid: Allow cpuid_read() to schedule
  x86/msr: Allow rdmsr_safe_on_cpu() to schedule
  x86/rtc: Stop using deprecated functions
  x86/dumpstack: Unify show_regs()
  x86/fault: Do not print IP in show_fault_oops()
  x86/MSR: Move native_* variants to msr.h

Pull x86 build updates from Ingo Molnar:
 "The biggest change is the forcing of asm-goto support on x86, which
  effectively increases the GCC minimum supported version to gcc-4.5 (on
  x86)"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Don't pass in -D__KERNEL__ multiple times
  x86: Remove FAST_FEATURE_TESTS
  x86: Force asm-goto
  x86/build: Drop superfluous ALIGN from the linker script

Pull x86 asm fixlets from Ingo Molnar:
 "A clobber list fix and cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Trim clear_page.S includes
  x86/asm: Clobber flags in clear_page()

Pull x86 apic updates from Ingo Molnar:
 "The main x86 APIC/IOAPIC changes in this cycle were:

   - Robustify kexec support to more carefully restore IRQ hardware
     state before calling into kexec/kdump kernels. (Baoquan He)

   - Clean up the local APIC code a bit (Dou Liyang)

   - Remove unused callbacks (David Rientjes)"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Finish removing unused callbacks
  x86/apic: Drop logical_smp_processor_id() inline
  x86/apic: Modernize the pending interrupt code
  x86/apic: Move pending interrupt check code into it's own function
  x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified
  x86/apic: Rename variables and functions related to x86_io_apic_ops
  x86/apic: Remove the (now) unused disable_IO_APIC() function
  x86/apic: Fix restoring boot IRQ mode in reboot and kexec/kdump
  x86/apic: Split disable_IO_APIC() into two functions to fix CONFIG_KEXEC_JUMP=y
  x86/apic: Split out restore_boot_irq_mode() from disable_IO_APIC()
  x86/apic: Make setup_local_APIC() static
  x86/apic: Simplify init_bsp_APIC() usage
  x86/x2apic: Mark set_x2apic_phys_mode() as __init

Pull SMP hotplug updates from Ingo Molnar:
 "Simplify the CPU hot-plug state machine"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Fix unused function warning
  cpu/hotplug: Merge cpuhp_bp_states and cpuhp_ap_states

Pull scheduler updates from Ingo Molnar:
 "The main scheduler changes in this cycle were:

   - NUMA balancing improvements (Mel Gorman)

   - Further load tracking improvements (Patrick Bellasi)

   - Various NOHZ balancing cleanups and optimizations (Peter Zijlstra)

   - Improve blocked load handling, in particular we can now reduce and
     eventually stop periodic load updates on 'very idle' CPUs. (Vincent
     Guittot)

   - On isolated CPUs offload the final 1Hz scheduler tick as well, plus
     related cleanups and reorganization. (Frederic Weisbecker)

   - Core scheduler code cleanups (Ingo Molnar)"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  sched/core: Update preempt_notifier_key to modern API
  sched/cpufreq: Rate limits for SCHED_DEADLINE
  sched/fair: Update util_est only on util_avg updates
  sched/cpufreq/schedutil: Use util_est for OPP selection
  sched/fair: Use util_est in LB and WU paths
  sched/fair: Add util_est on top of PELT
  sched/core: Remove TASK_ALL
  sched/completions: Use bool in try_wait_for_completion()
  sched/fair: Update blocked load when newly idle
  sched/fair: Move idle_balance()
  sched/nohz: Merge CONFIG_NO_HZ_COMMON blocks
  sched/fair: Move rebalance_domains()
  sched/nohz: Optimize nohz_idle_balance()
  sched/fair: Reduce the periodic update duration
  sched/nohz: Stop NOHZ stats when decayed
  sched/cpufreq: Provide migration hint
  sched/nohz: Clean up nohz enter/exit
  sched/fair: Update blocked load from NEWIDLE
  sched/fair: Add NOHZ stats balancing
  sched/fair: Restructure nohz_balance_kick()
  ...

Pull x86 RAS updates from Ingo Molnar:
 "The main changes in this cycle were:

   - AMD MCE support/decoding improvements (Yazen Ghannam)

   - general MCE header cleanups and reorganization (Borislav Petkov)"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "x86/mce/AMD: Collect error info even if valid bits are not set"
  x86/MCE: Cleanup and complete struct mce fields definitions
  x86/mce/AMD: Carve out SMCA get_block_address() code
  x86/mce/AMD: Get address from already initialized block
  x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type
  x86/mce/AMD: Pass the bank number to smca_get_bank_type()
  x86/mce/AMD: Collect error info even if valid bits are not set
  x86/mce: Issue the 'mcelog --ascii' message only on !AMD
  x86/mce: Convert 'struct mca_config' bools to a bitfield
  x86/mce: Put private structures and definitions into the internal header

Pull perf updates from Ingo Molnar:
 "The main kernel side changes were:

   - Modernize the kprobe and uprobe creation/destruction tooling ABIs:

     The existing text based APIs (kprobe_events and uprobe_events in
     tracefs), are naive, limited ABIs in that they require user-space
     to clean up after themselves, which is both difficult and fragile
     if the tool is buggy or exits unexpectedly. In other words they are
     not really suited for modern, robust tooling.

     So introduce a modern, file descriptor based ABI that does not have
     these limitations: introduce the 'perf_kprobe' and 'perf_uprobe'
     PMUs and extend the perf_event_open() syscall to create events with
     a kprobe/uprobe attached to them. These [k,u]probe are associated
     with this file descriptor, so they are not available in tracefs.

     (Song Liu)

   - Intel Cannon Lake CPU support (Harry Pan)

   - Intel PT cleanups (Alexander Shishkin)

   - Improve the performance of pinned/flexible event groups by using RB
     trees (Alexey Budankov)

   - Add PERF_EVENT_IOC_MODIFY_ATTRIBUTES which allows the modification
     of hardware breakpoints, which new ABI variant massively speeds up
     existing tooling that uses hardware breakpoints to instrument (and
     debug) memory usage.

     (Milind Chabbi, Jiri Olsa)

   - Various Intel PEBS handling fixes and improvements, and other Intel
     PMU improvements (Kan Liang)

   - Various perf core improvements and optimizations (Peter Zijlstra)

   - ... misc cleanups, fixes and updates.

  There's over 200 tooling commits, here's an (imperfect) list of
  highlights:

   - 'perf annotate' improvements:

      * Recognize and handle jumps to other functions as calls, which
        improves the navigation along jumps and back. (Arnaldo Carvalho
        de Melo)

      * Add the 'P' hotkey in TUI annotation to dump annotation output
        into a file, to ease e-mail reporting of annotation details.
        (Arnaldo Carvalho de Melo)

      * Add an IPC/cycles column to the TUI (Jin Yao)

      * Improve s390 assembly annotation (Thomas Richter)

      * Refactor the output formatting logic to better separate it into
        interactive and non-interactive features and add the --stdio2
        output variant to demonstrate this. (Arnaldo Carvalho de Melo)

   - 'perf script' improvements:

      * Add Python 3 support (Jaroslav Škarvada)

      * Add --show-round-event (Jiri Olsa)

   - 'perf c2c' improvements:

      * Add NUMA analysis support (Jiri Olsa)

   - 'perf trace' improvements:

      * Improve PowerPC support (Ravi Bangoria)

   - 'perf inject' improvements:

      * Integrate ARM CoreSight traces (Robert Walker)

   - 'perf stat' improvements:

      * Add the --interval-count option (yuzhoujian)

      * Add the --timeout option (yuzhoujian)

   - 'perf sched' improvements (Changbin Du)

   - Vendor events improvements :

      * Add IBM s390 vendor events (Thomas Richter)

      * Add and improve arm64 vendor events (John Garry, Ganapatrao
        Kulkarni)

      * Update POWER9 vendor events (Sukadev Bhattiprolu)

   - Intel PT tooling improvements (Adrian Hunter)

   - PMU handling improvements (Agustin Vega-Frias)

   - Record machine topology in perf.data (Jiri Olsa)

   - Various overwrite related cleanups (Kan Liang)

   - Add arm64 dwarf post unwind support (Kim Phillips, Jean Pihet)

   - ... and lots of other changes, cleanups and fixes, see the shortlog
     and Git history for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (262 commits)
  perf/x86/intel: Enable C-state residency events for Cannon Lake
  perf/x86/intel: Add Cannon Lake support for RAPL profiling
  perf/x86/pt, coresight: Clean up address filter structure
  perf vendor events s390: Add JSON files for IBM z14
  perf vendor events s390: Add JSON files for IBM z13
  perf vendor events s390: Add JSON files for IBM zEC12 zBC12
  perf vendor events s390: Add JSON files for IBM z196
  perf vendor events s390: Add JSON files for IBM z10EC z10BC
  perf mmap: Be consistent when checking for an unmaped ring buffer
  perf mmap: Fix accessing unmapped mmap in perf_mmap__read_done()
  perf build: Fix check-headers.sh opts assignment
  perf/x86: Update rdpmc_always_available static key to the modern API
  perf annotate: Use absolute addresses to calculate jump target offsets
  perf annotate: Defer searching for comma in raw line till it is needed
  perf annotate: Support jumping from one function to another
  perf annotate: Add "_local" to jump/offset validation routines
  perf python: Reference Py_None before returning it
  perf annotate: Mark jumps to outher functions with the call arrow
  perf annotate: Pass function descriptor to its instruction parsing routines
  perf annotate: No need to calculate notes->start twice
  ...

Pull locking updates from Ingo Molnar:
 "The main changes in the locking subsystem in this cycle were:

   - Add the Linux Kernel Memory Consistency Model (LKMM) subsystem,
     which is an an array of tools in tools/memory-model/ that formally
     describe the Linux memory coherency model (a.k.a.
     Documentation/memory-barriers.txt), and also produce 'litmus tests'
     in form of kernel code which can be directly executed and tested.

     Here's a high level background article about an earlier version of
     this work on LWN.net:

        https://lwn.net/Articles/718628/

     The design principles:

      "There is reason to believe that Documentation/memory-barriers.txt
       could use some help, and a major purpose of this patch is to
       provide that help in the form of a design-time tool that can
       produce all valid executions of a small fragment of concurrent
       Linux-kernel code, which is called a "litmus test". This tool's
       functionality is roughly similar to a full state-space search.
       Please note that this is a design-time tool, not useful for
       regression testing. However, we hope that the underlying
       Linux-kernel memory model will be incorporated into other tools
       capable of analyzing large bodies of code for regression-testing
       purposes."

     [...]

      "A second tool is klitmus7, which converts litmus tests to
       loadable kernel modules for direct testing. As with herd7, the
       klitmus7 code is freely available from

         http://diy.inria.fr/sources/index.html

       (and via "git" at https://github.com/herd/herdtools7)"

     [...]

     Credits go to:

      "This patch was the result of a most excellent collaboration
       founded by Jade Alglave and also including Alan Stern, Andrea
       Parri, and Luc Maranget."

     ... and to the gents listed in the MAINTAINERS entry:

        LINUX KERNEL MEMORY CONSISTENCY MODEL (LKMM)
        M:      Alan Stern <stern@rowland.harvard.edu>
        M:      Andrea Parri <parri.andrea@gmail.com>
        M:      Will Deacon <will.deacon@arm.com>
        M:      Peter Zijlstra <peterz@infradead.org>
        M:      Boqun Feng <boqun.feng@gmail.com>
        M:      Nicholas Piggin <npiggin@gmail.com>
        M:      David Howells <dhowells@redhat.com>
        M:      Jade Alglave <j.alglave@ucl.ac.uk>
        M:      Luc Maranget <luc.maranget@inria.fr>
        M:      "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

     The LKMM project already found several bugs in Linux locking
     primitives and improved the understanding and the documentation of
     the Linux memory model all around.

   - Add KASAN instrumentation to atomic APIs (Dmitry Vyukov)

   - Add RWSEM API debugging and reorganize the lock debugging Kconfig
     (Waiman Long)

   - ... misc cleanups and other smaller changes"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  locking/Kconfig: Restructure the lock debugging menu
  locking/Kconfig: Add LOCK_DEBUGGING_SUPPORT to make it more readable
  locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches
  lockdep: Make the lock debug output more useful
  locking/rtmutex: Handle non enqueued waiters gracefully in remove_waiter()
  locking/atomic, asm-generic, x86: Add comments for atomic instrumentation
  locking/atomic, asm-generic: Add KASAN instrumentation to atomic operations
  locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h
  locking/atomic, asm-generic: Add asm-generic/atomic-instrumented.h
  locking/xchg/alpha: Remove superfluous memory barriers from the _local() variants
  tools/memory-model: Finish the removal of rb-dep, smp_read_barrier_depends(), and lockless_dereference()
  tools/memory-model: Add documentation of new litmus test
  tools/memory-model: Remove mention of docker/gentoo image
  locking/memory-barriers: De-emphasize smp_read_barrier_depends() some more
  locking/lockdep: Show unadorned pointers
  mutex: Drop linkage.h from mutex.h
  tools/memory-model: Remove rb-dep, smp_read_barrier_depends, and lockless_dereference
  tools/memory-model: Convert underscores to hyphens
  tools/memory-model: Add a S lock-based external-view litmus test
  tools/memory-model: Add required herd7 version to README file
  ...

Pull RCU updates from Ingo Molnar:
 "The main RCU subsystem changes in this cycle were:

  - Miscellaneous fixes, perhaps most notably removing obsolete code
    whose only purpose in life was to gather information for the
    now-removed RCU debugfs facility. Other notable changes include
    removing NO_HZ_FULL_ALL in favor of the nohz_full kernel boot
    parameter, minor optimizations for expedited grace periods, some
    added tracing, creating an RCU-specific workqueue using Tejun's new
    WQ_MEM_RECLAIM flag, and several cleanups to code and comments.

  - SRCU cleanups and optimizations.

  - Torture-test updates, perhaps most notably the adding of ARMv8
    support, but also including numerous cleanups and usability fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  rcu: Create RCU-specific workqueues with rescuers
  torture: Provide more sensible nreader/nwriter defaults for rcuperf
  torture: Grace periods do not piggyback off of themselves
  torture: Adjust rcuperf trace processing to allow for workqueues
  torture: Default jitter off when running rcuperf
  torture: Specify qemu memory size with --memory argument
  rcutorture: Add basic ARM64 support to run scripts
  rcutorture: Update kvm.sh header comment
  rcutorture: Record which grace-period primitives are tested
  rcutorture: Re-enable testing of dynamic expediting
  rcutorture: Avoid fake-writer use of undefined primitives
  rcutorture: Abstract function and module names
  rcutorture: Replace multi-instance kzalloc() with kcalloc()
  rcu: Remove SRCU throttling
  srcu: Remove dead code in srcu_gp_end()
  srcu: Reduce scans of srcu_data in counter wrap check
  srcu: Prevent sdp->srcu_gp_seq_needed_exp counter wrap
  srcu: Abstract function name
  rcu: Make expedited RCU CPU selection avoid unnecessary stores
  rcu: Trace expedited GP delays due to transitioning CPUs
  ...

Pull header file cleanup from Ingo Molnar:
 "Reduce <linux/interrupt.h> dependencies: a single change that drops
  two #includes from this frequently used kernel header"

* 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  headers: Drop two #included headers from <linux/interrupt.h>

Pull debugobjects updates from Ingo Molnar:
 "Misc improvements:

   - add better instrumentation/debugging

   - optimize the freeing logic improve performance"

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Avoid another unused variable warning
  debugobjects: Fix debug_objects_freed accounting
  debugobjects: Use global free list in __debug_check_no_obj_freed()
  debugobjects: Use global free list in free_object()
  debugobjects: Add global free list and the counter
  debugobjects: Export max loops counter

Pull misc core updates from Ingo Molnar:
 "Two changes:

  - add membarriers to Documentation/features/

  - fix a minor nit in panic printk formatting"

* 'core-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  panic: Add closing panic marker parenthesis
  Documentation/features, membarriers: Document membarrier-sync-core architecture support
  Documentation/features: Allow comments in arch features files

Pull drm updates from Dave Airlie:
 "Cannonlake and Vega12 support are probably the two major things. This
  pull lacks nouveau, Ben had some unforseen leave and a few other
  blockers so we'll see how things look or maybe leave it for this merge
  window.

  core:
   - Device links to handle sound/gpu pm dependency
   - Color encoding/range properties
   - Plane clipping into plane check helper
   - Backlight helpers
   - DP TP4 + HBR3 helper support

  amdgpu:
   - Vega12 support
   - Enable DC by default on all supported GPUs
   - Powerplay restructuring and cleanup
   - DC bandwidth calc updates
   - DC backlight on pre-DCE11
   - TTM backing store dropping support
   - SR-IOV fixes
   - Adding "wattman" like functionality
   - DC crc support
   - Improved DC dual-link handling

  amdkfd:
   - GPUVM support for dGPU
   - KFD events for dGPU
   - Enable PCIe atomics for dGPUs
   - HSA process eviction support
   - Live-lock fixes for process eviction
   - VM page table allocation fix for large-bar systems

  panel:
   - Raydium RM68200
   - AUO G104SN02 V2
   - KEO TX31D200VM0BAA
   - ARM Versatile panels

  i915:
   - Cannonlake support enabled
   - AUX-F port support added
   - Icelake base enabling until internal milestone of forcewake support
   - Query uAPI interface (used for GPU topology information currently)
   - Compressed framebuffer support for sprites
   - kmem cache shrinking when GPU is idle
   - Avoid boosting GPU when waited item is being processed already
   - Avoid retraining LSPCON link unnecessarily
   - Decrease request signaling latency
   - Deprecation of I915_SET_COLORKEY_NONE
   - Kerneldoc and compiler warning cleanup for upcoming CI enforcements
   - Full range ycbcr toggling
   - HDCP support

  i915/gvt:
   - Big refactor for shadow ppgtt
   - KBL context save/restore via LRI cmd (Weinan)
   - Properly unmap dma for guest page (Changbin)

  vmwgfx:
   - Lots of various improvements

  etnaviv:
   - Use the drm gpu scheduler
   - prep work for GC7000L support

  vc4:
   - fix alpha blending
   - Expose perf counters to userspace

  pl111:
   - Bandwidth checking/limiting
   - Versatile panel support

  sun4i:
   - A83T HDMI support
   - A80 support
   - YUV plane support
   - H3/H5 HDMI support

  omapdrm:
   - HPD support for DVI connector
   - remove lots of static variables

  msm:
   - DSI updates from 10nm / SDM845
   - fix for race condition with a3xx/a4xx fence completion irq
   - some refactoring/prep work for eventual a6xx support (ie. when we
     have a userspace)
   - a5xx debugfs enhancements
   - some mdp5 fixes/cleanups to prepare for eventually merging
     writeback
   - support (ie. when we have a userspace)

  tegra:
   - mmap() fixes for fbdev devices
   - Overlay plane for hw cursor fix
   - dma-buf cache maintenance support

  mali-dp:
   - YUV->RGB conversion support

  rockchip:
   - rk3399/chromebook fixes and improvements

  rcar-du:
   - LVDS support move to drm bridge
   - DT bindings for R8A77995
   - Driver/DT support for R8A77970

  tilcdc:
   - DRM panel support"

* tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux: (1646 commits)
  drm/i915: Fix hibernation with ACPI S0 target state
  drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
  drm/amdkfd: Use ordered workqueue to restore processes
  drm/amdgpu: Fix acquiring VM on large-BAR systems
  drm/amd/pp: clean header file hwmgr.h
  drm/amd/pp: use mlck_table.count for array loop index limit
  drm: Fix uabi regression by allowing garbage mode->type from userspace
  drm/amdgpu: Add an ATPX quirk for hybrid laptop
  drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
  drm/amd/pp: Add new asic support in pp_psm.c
  drm/amd/pp: Clean up powerplay code on Vega12
  drm/amd/pp: Add smu irq handlers for legacy asics
  drm/amd/pp: Fix set wrong temperature range on smu7
  drm/amdgpu: Don't change preferred domian when fallback GTT v5
  drm/vmwgfx: Bump version patchlevel and date
  drm/vmwgfx: use monotonic event timestamps
  drm/vmwgfx: Unpin the screen object backup buffer when not used
  drm/vmwgfx: Stricter count of legacy surface device resources
  ...

Pull perf fixes from Ingo Molnar:
 "Two fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hwbp: Simplify the perf-hwbp code, fix documentation
  perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs

Pull x86 fixes from Ingo Molnar:
 "Two UV platform fixes, and a kbuild fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/UV: Fix critical UV MMR address error
  x86/platform/uv/BAU: Add APIC idt entry
  x86/purgatory: Avoid creating stray .<pid>.d files, remove -MD from KBUILD_CFLAGS

Pull x86 PTI fixes from Ingo Molnar:
 "Two fixes: a relatively simple objtool fix that makes Clang built
  kernels work with ORC debug info, plus an alternatives macro fix"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Fixup alternative_call_2
  objtool: Add Clang support

Cannon Lake supports C1/C3/C6/C7, PC2/PC3/PC6/PC7/PC8/PC9/PC10
state residency counters, this patch enables those counters.

( The MSR information is based on Intel Software Developers' Manual,
  Vol. 4, Order No. 335592. )
Tested-by: NPuthikorn Voravootivat <puthik@chromium.org>
Signed-off-by: NHarry Pan <harry.pan@intel.com>
Reviewed-by: NBenson Leung <bleung@chromium.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan.liang@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: gs0622@gmail.com
Link: http://lkml.kernel.org/r/20180309121549.630-3-harry.pan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch enables RAPL counters (energy consumption counters)
support for Cannon Lake processors.

( ESU and power domains refer to Intel Software Developers' Manual,
  Vol. 4, Order No. 335592. )

Usage example:

  $ perf list
  $ perf stat -a -e power/energy-cores/,power/energy-pkg/ sleep 10
Tested-by: NPuthikorn Voravootivat <puthik@chromium.org>
Signed-off-by: NHarry Pan <harry.pan@intel.com>
Reviewed-by: NBenson Leung <bleung@chromium.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: colin.king@canonical.com
Cc: gs0622@gmail.com
Cc: kan.liang@linux.intel.com
Link: http://lkml.kernel.org/r/20180309121549.630-2-harry.pan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Trivial fix to spelling mistake in the pr_err_once() error message text.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20180313154709.1015-1-colin.king@canonical.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some .<target>.cmd files under arch/x86 are showing two instances of
-D__KERNEL__, like arch/x86/boot/ and arch/x86/realmode/rm/.

__KERNEL__ is already defined in KBUILD_CPPFLAGS in the top Makefile,
so it can be dropped safely.
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/20180316084944.3997-1-caoj.fnst@cn.fujitsu.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Two config options in the lock debugging menu that are probably the most
frequently used, as far as I am concerned, is the PROVE_LOCKING and
LOCK_STAT. From a UI perspective, they should be front and center. So
these two options are now moved to the top of the lock debugging menu.

The DEBUG_WW_MUTEX_SLOWPATH option is also added to the PROVE_LOCKING
umbrella.
Signed-off-by: NWaiman Long <longman@redhat.com>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1522445280-7767-4-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are a couples of lock debugging Kconfig options that depends on
the following support options:

 - TRACE_IRQFLAGS_SUPPORT
 - STACKTRACE_SUPPORT
 - LOCKDEP_SUPPORT

That makes those lock debugging options harder to read and understand.
So a new LOCK_DEBUGGING_SUPPORT option is added that is equivalent to
the above three options together. That makes the Kconfig.debug file
more readable.
Signed-off-by: NWaiman Long <longman@redhat.com>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1522445280-7767-3-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

For a rwsem, locking can either be exclusive or shared. The corresponding
exclusive or shared unlock must be used. Otherwise, the protected data
structures may get corrupted or the lock may be in an inconsistent state.

In order to detect such anomaly, a new configuration option DEBUG_RWSEMS
is added which can be enabled to look for such mismatches and print
warnings that that happens.
Signed-off-by: NWaiman Long <longman@redhat.com>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1522445280-7767-2-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>