Add test cases where we combine semi-random imm values, mainly for testing
JITs when they have different encoding options for 64 bit immediates in
order to reduce resulting image size.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This new test captures stackmap with build_id with hardware event
PERF_COUNT_HW_CPU_CYCLES.

Because we only support one ips-to-build_id lookup per cpu in NMI
context, stack_amap will not be able to do the lookup in this test.
Therefore, we didn't do compare_stack_ips(), as it will alwasy fail.

urandom_read.c is extended to run configurable cycles so that it can be
caught by the perf event.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

BPF programs only have to specify the target kernel version for
tracing related hooks, in networking world that requirement does
not really apply.  Loosen the checks in libbpf to reflect that.

bpf_object__open() users will continue to see the error for backward
compatibility (and because prog_type is not available there).

Error code for NULL file name is changed from ENOENT to EINVAL,
as it seems more appropriate, hopefully, that's an OK change.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Fix spelling mistakes, improve and clarify the language of comments
in libbpf.h.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

There are two copies of event reading loop - in bpftool and
trace_helpers "library".  Consolidate them and move the code
to libbpf.  Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Ask the kernel to include sample time in each even instead of
reading the clock.  This is also more accurate because our
clock reading was done when user space would dump the buffer,
not when sample was produced.
Suggested-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Sync the header from include/uapi/linux/bpf.h which was updated to add
fib lookup helper function. This fixes selftests/bpf build failure.
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

'|& ...' is a bash 4.0+ construct which is not guaranteed to be available
when using '$(shell ...)' in a Makefile. Fall back to the more portable
'2>&1 | ...'.

Fixes the following warning during compilation:

	/bin/sh: 1: Syntax error: "&" unexpected
Signed-off-by: NJoe Stringer <joe@wand.net.nz>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.

Take this only as a simple example of fast-path forwarding.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Update .gitignore files.
Signed-off-by: NSirio Balmelli <sirio@b-ad.ch>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The BPF selftests fail to build with missing headers
'asm/bitsperlong.h' and 'asm/errno.h'.

These already exist in 'tools/arch/[arch]/include';
add architecture-agnostic header files in 'tools/include/uapi'
to reference them.
Signed-off-by: NSirio Balmelli <sirio@b-ad.ch>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch adds test for BPF_BTF_GET_FD_BY_ID and the new
btf_id/btf_key_id/btf_value_id in the "struct bpf_map_info".

It also modifies the existing BPF_OBJ_GET_INFO_BY_FD test
to reflect the new "struct bpf_btf_info".
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@fb.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch sync the tools/include/uapi/linux/btf.h with
the newly introduced BTF ID support.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@fb.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch adds a CHECK() macro for condition checking
and error report purpose.  Something similar to test_progs.c

It also counts the number of tests passed/skipped/failed and
print them at the end of the test run.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@fb.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The generated files udpgso* shouldn't be part of TEST_PROGS, they are
used by udpgso.sh and udpgsp_bench.sh. They should be added to the
TEST_GEN_FILES to get installed without being added to the main
run_kselftest.sh script.

Fixes: 3a687bef ("selftests: udp gso benchmark")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Users of BPF sooner or later discover perf_event_output() helpers
and BPF_MAP_TYPE_PERF_EVENT_ARRAY.  Dumping this array type is
not possible, however, we can add simple reading of perf events.
Create a new event_pipe subcommand for maps, this sub command
will only work with BPF_MAP_TYPE_PERF_EVENT_ARRAY maps.

Parts of the code from samples/bpf/trace_output_user.c.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Move the get_possible_cpus() function to shared code.  No functional
changes.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: NJiong Wang <jiong.wang@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Instead of spelling [hex] BYTES everywhere use DATA as keyword
for generalized value.  This will help us keep the messages
concise when longer command are added in the future.  It will
also be useful once BTF support comes.  We will only have to
change the definition of DATA.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Only sync the header from include/uapi/linux/bpf.h.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Remove all eBPF tests involving LD_ABS/LD_IND from test_bpf.ko. Reason
is that the eBPF tests from test_bpf module do not go via BPF verifier
and therefore any instruction rewrites from verifier cannot take place.

Therefore, move them into test_verifier which runs out of user space,
so that verfier can rewrite LD_ABS/LD_IND internally in upcoming patches.
It will have the same effect since runtime tests are also performed from
there. This also allows to finally unexport bpf_skb_vlan_{push,pop}_proto
and keep it internal to core kernel.

Additionally, also add further cBPF LD_ABS/LD_IND test coverage into
test_bpf.ko suite.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The test fails to work if reverse-path filtering is in effect on the
mirrored-to host interface, or for all interfaces.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of hand-managing the sysctl set and restore, use the wrappers
sysctl_set() and sysctl_restore() to do the bookkeeping automatically.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add two helper functions: sysctl_set() to change the value of a given
sysctl setting, and sysctl_restore() to change it back to what it was.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to commit a511858c ("selftests: fib_tests: Allow user to run
a specific test"), allow user to run only a subset of the tests using
the TESTS environment variable.

This is useful when not all the tests can pass on a given system.

Example:
# export TESTS="ping_ipv4 ping_ipv6"
# ./bridge_vlan_aware.sh
TEST: ping					[PASS]
TEST: ping6					[PASS]
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We sometimes observe failures in the test due to too large discrepancy
between the measured and expected ratios. For example:

TEST: ECMP                                                          [FAIL]
        Too large discrepancy between expected and measured ratios
        INFO: Expected ratio 1.00 Measured ratio 1.11

Fix this by allowing an up to 15% deviation between both ratios.

Another possibility is to increase the number of generated flows, but
this will prolong the execution time of the test, which is already quite
high.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NCraig Dillabaugh <cdillaba@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. remove useless parameter list to ./urandom_read
2. add missing "\n" to the end of an error message

Fixes: 81f77fd0 ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

To make eBPF program load time easier to parse from "bpftool prog"
output for machines, change the time format used by the program. The
format now differs for plain and JSON version:

- Plain version uses a string formatted according to ISO 8601.
- JSON uses the number of seconds since the Epoch, wich is less friendly
  for humans but even easier to process.

Example output:

    # ./bpftool prog
    41298: xdp  tag a04f5eef06a7f555 dev foo
            loaded_at 2018-04-18T17:19:47+0100  uid 0
            xlated 16B  not jited  memlock 4096B

    # ./bpftool prog -p
    [{
            "id": 41298,
            "type": "xdp",
            "tag": "a04f5eef06a7f555",
            "gpl_compatible": false,
            "dev": {
                "ifindex": 14,
                "ns_dev": 3,
                "ns_inode": 4026531993,
                "ifname": "foo"
            },
            "loaded_at": 1524068387,
            "uid": 0,
            "bytes_xlated": 16,
            "jited": false,
            "bytes_memlock": 4096
        }
    ]

Previously, "Apr 18/17:19" would be used at both places.
Suggested-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Bring the erspan uapi header file so BPF tunnel helpers can use it.

Fixes: 933a741e ("selftests/bpf: bpf tunnel test.")
Reported-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Bring fixes for eBPF helper documentation formatting to bpf.h under
tools/ as well.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

After prior kernel change, mmap() on TCP socket only reserves VMA.

We have to use getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...)
to perform the transfert of pages from skbs in TCP receive queue into such VMA.

struct tcp_zerocopy_receive {
	__u64 address;		/* in: address of mapping */
	__u32 length;		/* in/out: number of bytes to map/mapped */
	__u32 recv_skip_hint;	/* out: amount of bytes to skip */
};

After a successful getsockopt(...TCP_ZEROCOPY_RECEIVE...), @length contains
number of bytes that were mapped, and @recv_skip_hint contains number of bytes
that should be read using conventional read()/recv()/recvmsg() system calls,
to skip a sequence of bytes that can not be mapped, because not properly page
aligned.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch syncs bpf.h to tools/.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The test_stacktrace_map and test_stacktrace_build_id are
enhanced to call bpf_get_stack in the helper to get the
stack trace as well.  The stack traces from bpf_get_stack
and bpf_get_stackid are compared to ensure that for the
same stack as represented as the same hash, their ip addresses
or build id's must be the same.
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The test attached a raw_tracepoint program to raw_syscalls/sys_enter.
It tested to get stack for user space, kernel space and user
space with build_id request. It also tested to get user
and kernel stack into the same buffer with back-to-back
bpf_get_stack helper calls.

If jit is not enabled, the user space application will check
to ensure that the kernel function for raw_tracepoint
___bpf_prog_run is part of the stack.

If jit is enabled, we did not have a reliable way to
verify the kernel stack, so just assume the kernel stack
is good when the kernel stack size is greater than 0.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The test_verifier already has a few ARSH test cases.
This patch adds a new test case which takes advantage of newly
improved verifier behavior for bpf_get_stack and ARSH.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

There is no functionality change in this patch. The common-purpose
trace functions, including perf_event polling and ksym lookup,
are moved from trace_output_user.c and bpf_load.c to
selftests/bpf/trace_helpers.c so that these function can
be reused later in selftests.
Acked-by: NAlexei Starovoitov <ast@fb.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The tools header file bpf.h is synced with kernel uapi bpf.h.
The new helper is also added to bpf_helpers.h.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Within run_tests target, the whole script needs to be executed within
the same shell and not as separate subshells, so the initial test_num
variable set to 0 is still present when executing "test_num=`echo
$$test_num+1 | bc`;".

Demonstration of the issue (make run_tests):

TAP version 13
(standard_in) 1: syntax error
selftests: basic_test
========================================
ok 1.. selftests: basic_test [PASS]
(standard_in) 1: syntax error
selftests: basic_percpu_ops_test
========================================
ok 1.. selftests: basic_percpu_ops_test [PASS]
(standard_in) 1: syntax error
selftests: param_test
========================================
ok 1.. selftests: param_test [PASS]

With fix applied:

TAP version 13
selftests: basic_test
========================================
ok 1..1 selftests: basic_test [PASS]
selftests: basic_percpu_ops_test
========================================
ok 1..2 selftests: basic_percpu_ops_test [PASS]
selftests: param_test
========================================
ok 1..3 selftests: param_test [PASS]
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 1f87c7c1 ("selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format")
CC: Shuah Khan <shuahkh@osg.samsung.com>
CC: linux-kselftest@vger.kernel.org
Signed-off-by: NShuah Khan (Samsung OSG) <shuah@kernel.org>

These tests set up mirroring in a situation that the configuration is
incorrect, i.e. mirrored packets, if any, are not supposed to reach
destination tunnel device. Then the configuration is rectified and
mirroring is checked to have started working.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>