- 09 10月, 2008 10 次提交
-
-
由 David Woodhouse 提交于
Some block devices benefit from a hint that they can forget the contents of certain sectors. Add basic support for this to the block core, along with a 'blkdev_issue_discard()' helper function which issues such requests. The caller doesn't get to provide an end_io functio, since blkdev_issue_discard() will automatically split the request up into multiple bios if appropriate. Neither does the function wait for completion -- it's expected that callers won't care about when, or even _if_, the request completes. It's only a hint to the device anyway. By definition, the file system doesn't _care_ about these sectors any more. [With feedback from OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> and Jens Axboe <jens.axboe@oracle.com] Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 xiphmont@xiph.org 提交于
I have another request for the block filter SG_IO command whitelist, specifically the MMC streaming command set SET READ AHEAD command. The command applies only to MMC CDROM/DVDROM drives with the streaming optional feature set. The command is useful to cdparanoia in that it allows explicit cache control side effects that are, on many drives, cdparanoia's most efficient way to flush/disable the media cache on cdrom drives. I am aware of no reason why it should not be accessible from usespace. Also note that the command is already fully accessible through the SCSI-native version of the SG_IO ioctl as well as the traditional SG interface. The command is only being refused on block devices. That means that on a typical stock distro, the command is available through /dev/sg* but not /dev/scd* although both are typically available and accessible. Filtering the command is not providing any protection, only a confusing inconsistency. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd. net: Fix netdev_run_todo dead-lock tcp: Fix possible double-ack w/ user dma net: only invoke dev->change_rx_flags when device is UP netrom: Fix sock_orphan() use in nr_release ax25: Quick fix for making sure unaccepted sockets get destroyed. Revert "ax25: Fix std timer socket destroy handling." [Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle [Bluetooth] Add reset quirk for new Targus and Belkin dongles [Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers
-
由 Ralf Baechle 提交于
Symbol name spaghetti which is too complicated to cleanup on this stage of the release cycle breaks the build on BCM1480 platforms. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 08 10月, 2008 6 次提交
-
-
由 Daniele Lacamera 提交于
Because of rounding, in certain conditions, i.e. when in congestion avoidance state rho is smaller than 1/128 of the current cwnd, TCP Hybla congestion control starves and the cwnd is kept constant forever. This patch forces an increment by one segment after #send_cwnd calls without increments(newreno behavior). Signed-off-by: NDaniele Lacamera <root@danielinux.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Benjamin Thery tracked down a bug that explains many instances of the error unregister_netdevice: waiting for %s to become free. Usage count = %d It turns out that netdev_run_todo can dead-lock with itself if a second instance of it is run in a thread that will then free a reference to the device waited on by the first instance. The problem is really quite silly. We were trying to create parallelism where none was required. As netdev_run_todo always follows a RTNL section, and that todo tasks can only be added with the RTNL held, by definition you should only need to wait for the very ones that you've added and be done with it. There is no need for a second mutex or spinlock. This is exactly what the following patch does. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ali Saidi 提交于
From: Ali Saidi <saidi@engin.umich.edu> When TCP receive copy offload is enabled it's possible that tcp_rcv_established() will cause two acks to be sent for a single packet. In the case that a tcp_dma_early_copy() is successful, copied_early is set to true which causes tcp_cleanup_rbuf() to be called early which can send an ack. Further along in tcp_rcv_established(), __tcp_ack_snd_check() is called and will schedule a delayed ACK. If no packets are processed before the delayed ack timer expires the packet will be acked twice. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Jesper Dangaard Brouer <hawk@comx.dk> reported a bug when setting a VLAN device down that is in promiscous mode: When the VLAN device is set down, the promiscous count on the real device is decremented by one by vlan_dev_stop(). When removing the promiscous flag from the VLAN device afterwards, the promiscous count on the real device is decremented a second time by the vlan_change_rx_flags() callback. The root cause for this is that the ->change_rx_flags() callback is invoked while the device is down. The synchronization is meant to mirror the behaviour of the ->set_rx_mode callbacks, meaning the ->open function is responsible for doing a full sync on open, the ->close() function is responsible for doing full cleanup on ->stop() and ->change_rx_flags() is meant to do incremental changes while the device is UP. Only invoke ->change_rx_flags() while the device is UP to provide the intended behaviour. Tested-by: NJesper Dangaard Brouer <jdb@comx.dk> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Mackall 提交于
SLOB's ksize calculation was braindamaged and generally harmlessly underreported the allocation size. But for very small buffers, it could in fact overreport them, leading code depending on krealloc to overrun the allocation and trample other data. Signed-off-by: NMatt Mackall <mpm@selenic.com> Tested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 10月, 2008 15 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 135aedc3, as requested by Hans Verkuil. It was a patch for 2.6.28 where the BKL was pushed down from v4l core to the drivers, not for 2.6.27! Requested-by: NHans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-of-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
-
由 Mathieu Desnoyers 提交于
* Theodore Ts'o (tytso@mit.edu) wrote: > > I've been playing with adding some markers into ext4 to see if they > could be useful in solving some problems along with Systemtap. It > appears, though, that as of 2.6.27-rc8, markers defined in code which is > compiled directly into the kernel (i.e., not as modules) don't show up > in Module.markers: > > kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > > (Note the lack of any of the kernel_sched_* markers, and the markers I > added for ext4_* and jbd2_* are missing as wel.) > > Systemtap apparently depends on in-kernel trace_mark being recorded in > Module.markers, and apparently it's been claimed that it used to be > there. Is this a bug in systemtap, or in how Module.markers is getting > built? And is there a file that contains the equivalent information > for markers located in non-modules code? I think the problem comes from "markers: fix duplicate modpost entry" (commit d35cb360) Especially : - add_marker(mod, marker, fmt); + if (!mod->skip) + add_marker(mod, marker, fmt); } return; fail: Here is a fix that should take care if this problem. Thanks for the bug report! Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Tested-by: N"Theodore Ts'o" <tytso@mit.edu> CC: Greg KH <greg@kroah.com> CC: David Smith <dsmith@redhat.com> CC: Roland McGrath <roland@redhat.com> CC: Sam Ravnborg <sam@ravnborg.org> CC: Wenji Huang <wenji.huang@oracle.com> CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: call touch_softlockup_watchdog on resume kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: gart iommu have direct mapping when agp is present too
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: workaround for bogus gcc warning in ide_sysfs_register_port() ide-cd: Optiarc DVD RW AD-7200A does play audio IDE: Fix platform device registration in Swarm IDE driver (v2) ide-dma: fix ide_build_dmatable() for TRM290 ide-cd: temporary tray close fix
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y [MIPS] Fix CMP Kconfig configuration and mark as broken.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U V4L/DVB (9092): gspca: Bad init values for sonixj ov7660. V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors. V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561. V4L/DVB (9053): fix buffer overflow in uvc-video V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow V4L/DVB (9037): Fix support for Hauppauge Nova-S SE V4L/DVB (9029): Fix deadlock in demux code V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600 V4L/DVB (8963): s2255drv field count fix V4L/DVB (8961): zr36067: Fix RGBR pixel format V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h V4L/DVB (8958): zr36067: Return proper bytes-per-line value V4L/DVB (8957): zr36067: Restore the default pixel format V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800) V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom. ...
-
由 Haavard Skinnemoen 提交于
The atmel-mci driver sometimes fails data transfers like this: mmcblk0: error -5 transferring data end_request: I/O error, dev mmcblk0, sector 2749769 end_request: I/O error, dev mmcblk0, sector 2749777 It turns out that this might be caused by the BLKR register (which contains the block size and the number of blocks being transfered) being initialized too late. This patch moves the initialization of BLKR so that it contains the correct value before the block transfer command is sent. This error is difficult to reproduce, but if you insert a long delay (mdelay(10) or thereabouts) between the calls to atmci_start_command() and atmci_submit_data(), all transfers seem to fail without this patch, while I haven't seen any failures with this patch. Reported-by: NHein_Tibosch <hein_tibosch@yahoo.es> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jarek Poplawski 提交于
While debugging another bug it was found that NetRom socks are sometimes seen unorphaned in sk_free(). This patch moves sock_orphan() in nr_release() to the beginning (like in ax25, or rose). Reported-and-tested-by: NBernard Pidoux f6bvp <f6bvp@free.fr> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Since we reverted 30902dc3 ("ax25: Fix std timer socket destroy handling.") we have to put some kind of fix in to cure the issue whereby unaccepted connections do not get destroyed. The approach used here is from Tihomir Heidelberg - 9a4gl Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 30902dc3. It causes all kinds of problems, based upon a report by Bernard (f6bvp) and analysis by Jarek Poplawski. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wessel 提交于
The softlockup watchdog needs to be touched when resuming the from the kgdb stopped state to avoid the printk that a CPU is stuck if the debugger was active for longer than the softlockup threshold. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jan Kiszka 提交于
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest, I came across spurious unhandled NMIs while running the singlestep test. Looking closer at the code path each NMI takes when KGDB is enabled, I noticed that kgdb_nmicallback is called twice per event: One time via DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first invocation cures the unhandled NMIs here. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Rafael J. Wysocki 提交于
There is a bug in the BIOSes of some HP boxes with AMD Turions which connects IO-APIC pins with ACPI thermal trip points in such a way that if the state of the IO-APIC is not as expected by the (buggy) BIOS, the thermal trip points are set to insanely low values (usually all of them become 16 degrees Celsius). As a result, thermal throttling kicks in and knock the system down to its shoes. Unfortunately some of the recent IO-APIC changes made the bug show up. To prevent this from happening, blacklist machines that are known to be affected (nx6115 and 6715b in this particular case). This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as a regression from 2.6.26. On my box it was caused by: commit 691874fa Author: Maciej W. Rozycki <macro@linux-mips.org> Date: Tue May 27 21:19:51 2008 +0100 x86: I/O APIC: timer through 8259A second-chance Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> and the whole story is described in this (huge) thread: http://marc.info/?l=linux-kernel&m=121358440508410&w=4 Matthew Garrett told us about that happening on the nx6125: http://marc.info/?l=linux-kernel&m=121396307411930&w=4 and then Maciej analysed the breakage on the basis of a DSDT from the nx6325: http://marc.info/?l=linux-kernel&m=121401068718826&w=4 As far as the Dmitry's and Jason's boxes are concerned, I recognized the symptoms and asked them to verify that the blacklisting helped. It appears that the buggy BIOS code has been copy-pasted to the entire range of machines, for no good reason. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Tested-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: NJason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 10月, 2008 9 次提交
-
-
由 Marcel Holtmann 提交于
The new A-Link Bluetooth dongle is another one based on the BCM2046 chip from Broadcom and it also needs to send HCI_Reset before it becomes fully operational. Without the quirk it will show a lot of I/O errors. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
Targus and Belkin have come out with new Bluetooth 2.1 capable dongles using the latest BCM2046 chip from Broadcom. Both of them are so called HID proxy dongles and they need to send HCI_Reset before they become fully operational. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The transfer buffer of an URB will be automatically freed when using the URB_FREE_BUFFER transfer_flag. So the extra calls to kfree() will cause a double free. Reported-by: NJustin Mattock <justinmattock@gmail.com> Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Because sync-r4k.c doesn't build. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
Reported-by: N"Steven Noonan" <steven@uplinklabs.net> Suggested-by: N"Elias Oltmanns" <eo@nebensachen.de> Cc: mingo@elte.hu Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Bodo Eggert 提交于
The Optiarc DVD RW AD-7200A can play audio, but tells it could not. Signed-off-by: NBodo Eggert <7eggert@gmx.de> Tested-by: NNick Warne <nick@ukfsn.org> Received-from: Borislav Petkov <petkovbb@googlemail.com> [bart: keep "audio" quirks together] Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Ralf Baechle 提交于
The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylylov 提交于
Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes, judging from the code immediately preceding this check. So, we must never try to "split" the PRD for TRM290. This is probably never hit anyway -- with the DMA buffers aligned to at least 512 bytes and ATAPI DMA not being used for non block I/O commands... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-