- 03 4月, 2018 1 次提交
-
-
由 Dan Williams 提交于
In preparation for the dax implementation to start associating dax pages to inodes via page->mapping, we need to provide a 'struct address_space_operations' instance for dax. Otherwise, direct-I/O triggers incorrect page cache assumptions and warnings. Reviewed-by: NJan Kara <jack@suse.com> Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 31 3月, 2018 5 次提交
-
-
由 Dan Williams 提交于
In preparation for the dax implementation to start associating dax pages to inodes via page->mapping, we need to provide a 'struct address_space_operations' instance for dax. Otherwise, direct-I/O triggers incorrect page cache assumptions and warnings. Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: linux-ext4@vger.kernel.org Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
In preparation for the dax implementation to start associating dax pages to inodes via page->mapping, we need to provide a 'struct address_space_operations' instance for dax. Otherwise, direct-I/O triggers incorrect page cache assumptions and warnings like the following: WARNING: CPU: 27 PID: 1783 at fs/xfs/xfs_aops.c:1468 xfs_vm_set_page_dirty+0xf3/0x1b0 [xfs] [..] CPU: 27 PID: 1783 Comm: dma-collision Tainted: G O 4.15.0-rc2+ #984 [..] Call Trace: set_page_dirty_lock+0x40/0x60 bio_set_pages_dirty+0x37/0x50 iomap_dio_actor+0x2b7/0x3b0 ? iomap_dio_zero+0x110/0x110 iomap_apply+0xa4/0x110 iomap_dio_rw+0x29e/0x3b0 ? iomap_dio_zero+0x110/0x110 ? xfs_file_dio_aio_read+0x7c/0x1a0 [xfs] xfs_file_dio_aio_read+0x7c/0x1a0 [xfs] xfs_file_read_iter+0xa0/0xc0 [xfs] __vfs_read+0xf9/0x170 vfs_read+0xa6/0x150 SyS_pread64+0x93/0xb0 entry_SYSCALL_64_fastpath+0x1f/0x96 ...where the default set_page_dirty() handler assumes that dirty state is being tracked in 'struct page' flags. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: NJan Kara <jack@suse.cz> Suggested-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Block device inodes never have S_DAX set, so kill the check for DAX and diversion to dax_writeback_mapping_range(). Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
In preparation for the dax implementation to start associating dax pages to inodes via page->mapping, we need to provide a 'struct address_space_operations' instance for dax. Define some generic VFS aops helpers for dax. These noop implementations are there in the dax case to prevent the VFS from falling back to operations with page-cache assumptions, dax_writeback_mapping_range() may not be referenced in the FS_DAX=n case. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: NMatthew Wilcox <mawilcox@microsoft.com> Suggested-by: NJan Kara <jack@suse.cz> Suggested-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Suggested-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
In preparation for examining the busy state of dax pages in the truncate path, switch from sectors to pfns in the radix. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 20 3月, 2018 1 次提交
-
-
由 Peter Zijlstra 提交于
As a replacement for the wait_on_atomic_t() API provide the wait_var_event() API. The wait_var_event() API is based on the very same hashed-waitqueue idea, but doesn't care about the type (atomic_t) or the specific condition (atomic_read() == 0). IOW. it's much more widely applicable/flexible. It shares all the benefits/disadvantages of a hashed-waitqueue approach with the existing wait_on_atomic_t/wait_on_bit() APIs. The API is modeled after the existing wait_event() API, but instead of taking a wait_queue_head, it takes an address. This addresses is hashed to obtain a wait_queue_head from the bit_wait_table. Similar to the wait_event() API, it takes a condition expression as second argument and will wait until this expression becomes true. The following are (mostly) identical replacements: wait_on_atomic_t(&my_atomic, atomic_t_wait, TASK_UNINTERRUPTIBLE); wake_up_atomic_t(&my_atomic); wait_var_event(&my_atomic, !atomic_read(&my_atomic)); wake_up_var(&my_atomic); The only difference is that wake_up_var() is an unconditional wakeup and doesn't check the previously hard-coded (atomic_read() == 0) condition here. This is of little concequence, since most callers are already conditional on atomic_dec_and_test() and the ones that are not, are trivial to make so. Tested-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 3月, 2018 1 次提交
-
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 08 3月, 2018 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio bugfix from Michael Tsirkin: "A bugfix for error handling in virtio" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: fix num_free handling in error case
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: - we are reverting patch that was switched touchpad on Lenovo T460P over to native RMI because on these boxes BIOS messes up with SMBus controller state. We might re-enable it later once SMBus issue is resolved - disabling interrupts in matrix_keypad driver was racy - mms114 now has SPDX header and matching MODULE_LICENSE * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI" Input: matrix_keypad - fix race when disabling interrupts Input: mms114 - add SPDX identifier Input: mms114 - fix license module information
-
由 Arkadiusz Hiler 提交于
This reverts commit 48282969 which caused the following issues: 1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working after suspend-resume cycle. Due to strange state of the device another suspend is impossible. The following dmesg errors can be observed: thinkpad_acpi: EC reports that Thermal Table has changed rmi4_smbus 7-002c: failed to get SMBus version number! rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask. rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16. rmi4_f01 rmi4-00.fn01: Resume failed with code -16. rmi4_physical rmi4-00: Failed to suspend functions: -16 rmi4_smbus 7-002c: Failed to resume device: -16 PM: resume devices took 0.640 seconds rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16). rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts! rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! psmouse: probe of serio3 failed with error -1 2. On another T460p with BIOS version 2.15 two finger scrolling gesture on the touchpad stops working after suspend-resume cycle (about 75% reproducibility, when it still works, the scrolling gesture becomes laggy). Nothing suspicious appears in the dmesg. Analysis form Richard Schütz: "RMI is unreliable on the ThinkPad T460p because the device is affected by the firmware behavior addressed in a7ae8195 ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR")." The affected devices often show: i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited Reported-by: NRichard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Tested-by: NMartin Peres <martin.peres@linux.intel.com> Tested-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: stable@vger.kernel.org Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2由 Linus Torvalds 提交于
Pull gfs2 fix from Bob Peterson: "An additional patch from Andreas Gruenbacher that fixes another unfortunate GFS2 regression" * tag 'gfs2-4.16.rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fixes to "Implement iomap for block_map" (2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Nine bug fixes for s390: - Three fixes for the expoline code, one of them is strictly speaking a cleanup but as it relates to code added with 4.16 I would like to include the patch. - Three timer related fixes in the common I/O layer - A fix for the handling of internal DASD request which could cause panics. - One correction in regard to the accounting of pud page tables vs. compat tasks. - The register scrubbing in entry.S caused spurious crashes, this is fixed now as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/entry.S: fix spurious zeroing of r0 s390: Fix runtime warning about negative pgtables_bytes s390: do not bypass BPENTER for interrupt system calls s390/cio: clear timer when terminating driver I/O s390/cio: fix return code after missing interrupt s390/cio: fix ccw_device_start_timeout API s390/clean-up: use CFI_* macros in entry.S s390: Replace IS_ENABLED(EXPOLINE_*) with IS_ENABLED(CONFIG_EXPOLINE_*) s390/dasd: fix handling of internal requests
-
由 Linus Torvalds 提交于
Merge tag 'regulator-fix-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes here: - another half of the supend to idle fix from Geert that went in earlier, both he and I are confused as to why he didn't notice that this was missing when his earlier fix was merged. - a simple fix for a test done the wrong way round in the stm32-vrefbuf driver" * tag 'regulator-fix-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix resume from suspend to idle regulator: stm32-vrefbuf: fix check on ready flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is mostly fixes for driver specific issues (nine of them) and the storvsc performance improvement with interrupt handling which was dropped from the previous fixes pull request. We also have two regressions: one is a double call_rcu() in ATA error handling and the other is a missed conversion to BLK_STS_OK in __scsi_error_from_host_byte()" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix kernel crash during port toggle scsi: qla2xxx: Fix FC-NVMe LUN discovery scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte() scsi: core: Avoid that ATA error handling can trigger a kernel hang or oops scsi: qla2xxx: ensure async flags are reset correctly scsi: qla2xxx: do not check login_state if no loop id is assigned scsi: qla2xxx: Fixup locking for session deletion scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS scsi: mpt3sas: wait for and flush running commands on shutdown/unload scsi: mpt3sas: fix oops in error handlers after shutdown/unload scsi: storvsc: Spread interrupts when picking a channel for I/O requests scsi: megaraid_sas: Do not use 32-bit atomic request descriptor for Ventura controllers
-
由 Andreas Gruenbacher 提交于
It turns out that commit 3229c18c0d6b2 'Fixes to "Implement iomap for block_map"' introduced another bug in gfs2_iomap_begin that can cause gfs2_block_map to set bh->b_size of an actual buffer to 0. This can lead to arbitrary incorrect behavior including crashes or disk corruption. Revert the incorrect part of that commit. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 07 3月, 2018 2 次提交
-
-
由 Mark Brown 提交于
Merge remote-tracking branches 'regulator/fix/resume' and 'regulator/fix/stm32-vfrefbuf' into regulator-linus
-
由 Linus Torvalds 提交于
Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull sigingo fix from Eric Biederman: "The kbuild test robot found that I accidentally moved si_pkey when I was cleaning up siginfo_t. A short followed by an int with the int having 8 byte alignment. Sheesh siginfo_t is a weird structure. I have now corrected it and added build time checks that with a little luck will catch any similar future mistakes. The build time checks were sufficient for me to verify the bug and to verify my fix. So they are at least useful this once." * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal/x86: Include the field offsets in the build time checks signal: Correct the offset of si_pkey in struct siginfo
-
- 06 3月, 2018 11 次提交
-
-
由 Christian Borntraeger 提交于
when a system call is interrupted we might call the critical section cleanup handler that re-does some of the operations. When we are between .Lsysc_vtime and .Lsysc_do_svc we might also redo the saving of the problem state registers r0-r7: .Lcleanup_system_call: [...] 0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER # set up saved register r11 lg %r15,__LC_KERNEL_STACK la %r9,STACK_FRAME_OVERHEAD(%r15) stg %r9,24(%r11) # r11 pt_regs pointer # fill pt_regs mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC ---> stmg %r0,%r7,__PT_R0(%r9) The problem is now, that we might have already zeroed out r0. The fix is to move the zeroing of r0 after sysc_do_svc. Reported-by: NFarhan Ali <alifm@linux.vnet.ibm.com> Fixes: 7041d281 ("s390: scrub registers on kernel entry and KVM exit") Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Eric W. Biederman 提交于
Due to an oversight when refactoring siginfo_t si_pkey has been in the wrong position since 4.16-rc1. Add an explicit check of the offset of every user space field in siginfo_t and compat_siginfo_t to make a mistake like this hard to make in the future. I have run this code on 4.15 and 4.16-rc1 with the position of si_pkey fixed and all of the fields show up in the same location. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
The change moving addr_lsb into the _sigfault union failed to take into account that _sigfault._addr_bnd._lower being a pointer forced the entire union to have pointer alignment. In practice this only mattered for the offset of si_pkey which is why this has taken so long to discover. To correct this change _dummy_pkey and _dummy_bnd to have pointer type. Reported-by: Nkernel test robot <shun.hao@intel.com> Fixes: b68a68d3 ("signal: Move addr_lsb into the _sigfault union for clarity") Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 cleanups from Tony Luck: - More atomic cleanup from willy - Fix a python script to work with version 3 - Some other small cleanups * tag 'please-pull-ia64_misc' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities" ia64/err-inject: Use get_user_pages_fast() ia64: doc: tweak whitespace for 'console=' parameter ia64: Convert remaining atomic operations ia64: convert unwcheck.py to python3
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in debug message text. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Davidlohr Bueso 提交于
At the point of sysfs callback, the call to gup is done without mmap_sem (or any lock for that matter). This is racy. As such, use the get_user_pages_fast() alternative and safely avoid taking the lock, if possible. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Sergei Trofimovich 提交于
CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> CC: linux-ia64@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Matthew Wilcox 提交于
While we've only seen inlining problems with atomic_sub_return(), the other atomic operations could have the same problem. Convert all remaining operations to use the same solution as atomic_sub_return(). Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Corentin Labbe 提交于
Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no longer run. This patch convert it to the python3 syntax. I have ran it with python2/python3 while printing values of start/end/rlen_sum which could be impacted by this change and I see no difference. Fixes: 94a47083 ("scripts: change scripts to use system python instead of env") Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "A fix for regression in memory-hotplug install script that prevents the test from running on the target" * tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: fix emit_tests regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
-
- 05 3月, 2018 11 次提交
-
-
由 David S. Miller 提交于
Stephen Hemminger says: ==================== hv_netvsc: minor fixes These are improvements to netvsc driver. They aren't functionality changes so not targeting net-next; and they are not show stopper bugs that need to go to stable either. v2 - drop the irq flags patch, defer it to net-next - split the multicast filter flag patch out - change propogate rx mode patch to handle startup of vf ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The netvsc device should propagate filters to the SR-IOV VF device (if present). The flags also need to be propagated to the VF device as well. This only really matters on local Hyper-V since Azure does not support multiple addresses. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The netvsc driver was always enabling all multicast and broadcast even if netdevice flag had not enabled it. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
When VF is used for accelerated networking it will likely have more queues (and different policy) than the synthetic NIC. This patch defers the queue policy to the VF so that all the queues can be used. This impacts workloads like local generate UDP. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Since the netvsc_channel_cb is already called in interrupt context from vmbus, there is no need to do irqsave/restore. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
There is a race between napi_reschedule and re-enabling interrupts which could lead to missed host interrrupts. This occurs when interrupts are re-enabled (hv_end_read) and vmbus irq callback (netvsc_channel_cb) has already scheduled NAPI. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Block setup of multiple channels earlier in the teardown process. This avoids possible races between halt and subchannel initialization. Suggested-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Need to delete NAPI association if vmbus_open fails. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Don't wake transmit queues if link is not up yet. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Change the initialization order so that the device is ready to transmit (ie connect vsp is completed) before setting the internal reference to the device with RCU. This avoids any races on initialization and prevents retry issues on shutdown. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
XDP_REDIRECT support for mergeable buffer was removed since commit 7324f539 ("virtio_net: disable XDP_REDIRECT in receive_mergeable() case"). This is because we don't reserve enough tailroom for struct skb_shared_info which breaks XDP assumption. So this patch fixes this by reserving enough tailroom and using fixed size of rx buffer. Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-