- 26 12月, 2011 6 次提交
-
-
由 Scott Wood 提交于
This is required for THIS_MODULE. We recently stopped acquiring it via some other header. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Michael Neuling 提交于
Currently kvmppc_start_thread() tries to wake other SMT threads via xics_wake_cpu(). Unfortunately xics_wake_cpu only exists when CONFIG_SMP=Y so when compiling with CONFIG_SMP=N we get: arch/powerpc/kvm/built-in.o: In function `.kvmppc_start_thread': book3s_hv.c:(.text+0xa1e0): undefined reference to `.xics_wake_cpu' The following should be fine since kvmppc_start_thread() shouldn't called to start non-zero threads when SMP=N since threads_per_core=1. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Andreas Schwab 提交于
kvmppc_h_pr is only available if CONFIG_KVM_BOOK3S_64_PR. Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Andreas Schwab 提交于
compute_tlbie_rb is only used on ppc64 and cannot be compiled on ppc32. Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Jan Kiszka 提交于
Unlike all of the other cpuid bits, the TSC deadline timer bit is set unconditionally, regardless of what userspace wants. This is broken in several ways: - if userspace doesn't use KVM_CREATE_IRQCHIP, and doesn't emulate the TSC deadline timer feature, a guest that uses the feature will break - live migration to older host kernels that don't support the TSC deadline timer will cause the feature to be pulled from under the guest's feet; breaking it - guests that are broken wrt the feature will fail. Fix by not enabling the feature automatically; instead report it to userspace. Because the feature depends on KVM_CREATE_IRQCHIP, which we cannot guarantee will be called, we expose it via a KVM_CAP_TSC_DEADLINE_TIMER and not KVM_GET_SUPPORTED_CPUID. Fixes the Illumos guest kernel, which uses the TSC deadline timer feature. [avi: add the KVM_CAP + documentation] Reported-by: NAlexey Zaytsev <alexey.zaytsev@gmail.com> Tested-by: NAlexey Zaytsev <alexey.zaytsev@gmail.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alex Williamson 提交于
Only allow KVM device assignment to attach to devices which: - Are not bridges - Have BAR resources (assume others are special devices) - The user has permissions to use Assigning a bridge is a configuration error, it's not supported, and typically doesn't result in the behavior the user is expecting anyway. Devices without BAR resources are typically chipset components that also don't have host drivers. We don't want users to hold such devices captive or cause system problems by fencing them off into an iommu domain. We determine "permission to use" by testing whether the user has access to the PCI sysfs resource files. By default a normal user will not have access to these files, so it provides a good indication that an administration agent has granted the user access to the device. [Yang Bai: add missing #include] [avi: fix comment style] Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NYang Bai <hamo.by@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 25 12月, 2011 3 次提交
-
-
由 Alex Williamson 提交于
This option has no users and it exposes a security hole that we can allow devices to be assigned without iommu protection. Make KVM_DEV_ASSIGN_ENABLE_IOMMU a mandatory option. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
User space may create the PIT and forgets about setting up the irqchips. In that case, firing PIT IRQs will crash the host: BUG: unable to handle kernel NULL pointer dereference at 0000000000000128 IP: [<ffffffffa10f6280>] kvm_set_irq+0x30/0x170 [kvm] ... Call Trace: [<ffffffffa11228c1>] pit_do_work+0x51/0xd0 [kvm] [<ffffffff81071431>] process_one_work+0x111/0x4d0 [<ffffffff81071bb2>] worker_thread+0x152/0x340 [<ffffffff81075c8e>] kthread+0x7e/0x90 [<ffffffff815a4474>] kernel_thread_helper+0x4/0x10 Prevent this by checking the irqchip mode before starting a timer. We can't deny creating the PIT if the irqchips aren't set up yet as current user land expects this order to work. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: fix incorrect VRAM size check in vmw_kms_fb_create() drm/radeon/kms: bail on BTC parts if MC ucode is missing
-
- 24 12月, 2011 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Fix race between CPU hotplug and lglocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux由 Linus Torvalds 提交于
for linus: writeback reason binary tracing format fix * tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: show writeback reason with __print_symbolic
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: adapt update-po-config to new UML layout
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: call d_instantiate after all ops are setup Btrfs: fix worker lock misuse in find_worker
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: xt_connbytes: handle negation correctly net: relax rcvbuf limits rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt() net: introduce DST_NOPEER dst flag mqprio: Avoid panic if no options are provided bridge: provide a mtu() method for fake_dst_ops
-
-
- 23 12月, 2011 18 次提交
-
-
由 Florian Westphal 提交于
"! --connbytes 23:42" should match if the packet/byte count is not in range. As there is no explict "invert match" toggle in the match structure, userspace swaps the from and to arguments (i.e., as if "--connbytes 42:23" were given). However, "what <= 23 && what >= 42" will always be false. Change things so we use "||" in case "from" is larger than "to". This change may look like it breaks backwards compatibility when "to" is 0. However, older iptables binaries will refuse "connbytes 42:0", and current releases treat it to mean "! --connbytes 0:42", so we should be fine. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Al Viro 提交于
This closes races where btrfs is calling d_instantiate too soon during inode creation. All of the callers of btrfs_add_nondir are updated to instantiate after the inode is fully setup in memory. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Dan Carpenter noticed that we were doing a double unlock on the worker lock, and sometimes picking a worker thread without the lock held. This fixes both errors. Signed-off-by: NChris Mason <chris.mason@oracle.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
-
由 Eric Dumazet 提交于
skb->truesize might be big even for a small packet. Its even bigger after commit 87fb4b7b (net: more accurate skb truesize) and big MTU. We should allow queueing at least one packet per receiver, even with a low RCVBUF setting. Reported-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xi Wang 提交于
Setting a large rps_flow_cnt like (1 << 30) on 32-bit platform will cause a kernel oops due to insufficient bounds checking. if (count > 1<<30) { /* Enforce a limit to prevent overflow */ return -EINVAL; } count = roundup_pow_of_two(count); table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count)); Note that the macro RPS_DEV_FLOW_TABLE_SIZE(count) is defined as: ... + (count * sizeof(struct rps_dev_flow)) where sizeof(struct rps_dev_flow) is 8. (1 << 30) * 8 will overflow 32 bits. This patch replaces the magic number (1 << 30) with a symbolic bound. Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NXi Wang <xi.wang@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Chris Boot reported crashes occurring in ipv6_select_ident(). [ 461.457562] RIP: 0010:[<ffffffff812dde61>] [<ffffffff812dde61>] ipv6_select_ident+0x31/0xa7 [ 461.578229] Call Trace: [ 461.580742] <IRQ> [ 461.582870] [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2 [ 461.589054] [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155 [ 461.595140] [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b [ 461.601198] [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e [nf_conntrack_ipv6] [ 461.608786] [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77 [ 461.614227] [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543 [ 461.620659] [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111 [ 461.626440] [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a [bridge] [ 461.633581] [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459 [ 461.639577] [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76 [bridge] [ 461.646887] [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f [bridge] [ 461.653997] [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77 [ 461.659473] [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge] [ 461.665485] [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111 [ 461.671234] [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge] [ 461.677299] [<ffffffffa0379215>] ? nf_bridge_update_protocol+0x20/0x20 [bridge] [ 461.684891] [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack] [ 461.691520] [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge] [ 461.697572] [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56 [bridge] [ 461.704616] [<ffffffffa0379031>] ? nf_bridge_push_encap_header+0x1c/0x26 [bridge] [ 461.712329] [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95 [bridge] [ 461.719490] [<ffffffffa037900a>] ? nf_bridge_pull_encap_header+0x1c/0x27 [bridge] [ 461.727223] [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge] [ 461.734292] [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77 [ 461.739758] [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge] [ 461.746203] [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111 [ 461.751950] [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge] [ 461.758378] [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56 [bridge] This is caused by bridge netfilter special dst_entry (fake_rtable), a special shared entry, where attaching an inetpeer makes no sense. Problem is present since commit 87c48fa3 (ipv6: make fragment identifications less predictable) Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and __ip_select_ident() fallback to the 'no peer attached' handling. Reported-by: NChris Boot <bootc@bootc.net> Tested-by: NChris Boot <bootc@bootc.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Userspace may not provide TCA_OPTIONS, in fact tc currently does so not do so if no arguments are specified on the command line. Return EINVAL instead of panicing. Signed-off-by: NThomas Graf <tgraf@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 618f9bc7 (net: Move mtu handling down to the protocol depended handlers) forgot the bridge netfilter case, adding a NULL dereference in ip_fragment(). Reported-by: NChris Boot <bootc@bootc.net> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md/bitmap: It is OK to clear bits during recovery. md: don't give up looking for spares on first failure-to-add md/raid5: ensure correct assessment of drives during degraded reshape. md/linear: fix hot-add of devices to linear arrays.
-
由 NeilBrown 提交于
commit d0a4bb49 introduced a regression which is annoying but fairly harmless. When writing to an array that is undergoing recovery (a spare in being integrated into the array), writing to the array will set bits in the bitmap, but they will not be cleared when the write completes. For bits covering areas that have not been recovered yet this is not a problem as the recovery will clear the bits. However bits set in already-recovered region will stay set and never be cleared. This doesn't risk data integrity. The only negatives are: - next time there is a crash, more resyncing than necessary will be done. - the bitmap doesn't look clean, which is confusing. While an array is recovering we don't want to update the 'events_cleared' setting in the bitmap but we do still want to clear bits that have very recently been set - providing they were written to the recovering device. So split those two needs - which previously both depended on 'success' and always clear the bit of the write went to all devices. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Before performing a recovery we try to remove any spares that might not be working, then add any that might have become relevant. Currently we abort on the first spare that cannot be added. This is a false optimisation. It is conceivable that - depending on rules in the personality - a subsequent spare might be accepted. Also the loop does other things like count the available spares and reset the 'recovery_offset' value. If we abort early these might not happen properly. So remove the early abort. In particular if you have an array what is undergoing recovery and which has extra spares, then the recovery may not restart after as reboot as the could of 'spares' might end up as zero. Reported-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
While reshaping a degraded array (as when reshaping a RAID0 by first converting it to a degraded RAID4) we currently get confused about which devices are in_sync. In most cases we get it right, but in the region that is being reshaped we need to treat non-failed devices as in-sync when we have the data but haven't actually written it out yet. Reported-by: NAdam Kwolek <adam.kwolek@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
commit d70ed2e4 broke hot-add to a linear array. After that commit, metadata if not written to devices until they have been fully integrated into the array as determined by saved_raid_disk. That patch arranged to clear that field after a recovery completed. However for linear arrays, there is no recovery - the integration is instantaneous. So we need to explicitly clear the saved_raid_disk field. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 David S. Miller 提交于
This silently was working for many years and stopped working on Niagara-T3 machines. We need to set the MSIQ to VALID before we can set it's state to IDLE. On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL errors. The hypervisor documentation says, rather ambiguously, that the MSIQ must be "initialized" before one can set the state. I previously understood this to mean merely that a successful setconf() operation has been performed on the MSIQ, which we have done at this point. But it seems to also mean that it has been set VALID too. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Fix usb/isp1760 build on sparc usb: gadget: epautoconf: do not change number of streams usb: dwc3: core: fix cached revision on our structure usb: musb: fix reset issue with full speed device
-
git://github.com/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
-
由 David Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 12月, 2011 4 次提交
-
-
由 Xi Wang 提交于
Commit e133e737 didn't correctly fix the integer overflow issue. - unsigned int required_size; + u64 required_size; ... required_size = mode_cmd->pitch * mode_cmd->height; - if (unlikely(required_size > dev_priv->vram_size)) { + if (unlikely(required_size > (u64) dev_priv->vram_size)) { Note that both pitch and height are u32. Their product is still u32 and would overflow before being assigned to required_size. A correct way is to convert pitch and height to u64 before the multiplication. required_size = (u64)mode_cmd->pitch * (u64)mode_cmd->height; This patch calls the existing vmw_kms_validate_mode_vram() for validation. Signed-off-by: NXi Wang <xi.wang@gmail.com> Reviewed-and-tested-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We already do this for cayman, need to also do it for BTC parts. The default memory and voltage setup is not adequate for advanced operation. Continuing will result in an unusable display. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Srivatsa S. Bhat 提交于
Currently, the *_global_[un]lock_online() routines are not at all synchronized with CPU hotplug. Soft-lockups detected as a consequence of this race was reported earlier at https://lkml.org/lkml/2011/8/24/185. (Thanks to Cong Meng for finding out that the root-cause of this issue is the race condition between br_write_[un]lock() and CPU hotplug, which results in the lock states getting messed up). Fixing this race by just adding {get,put}_online_cpus() at appropriate places in *_global_[un]lock_online() is not a good option, because, then suddenly br_write_[un]lock() would become blocking, whereas they have been kept as non-blocking all this time, and we would want to keep them that way. So, overall, we want to ensure 3 things: 1. br_write_lock() and br_write_unlock() must remain as non-blocking. 2. The corresponding lock and unlock of the per-cpu spinlocks must not happen for different sets of CPUs. 3. Either prevent any new CPU online operation in between this lock-unlock, or ensure that the newly onlined CPU does not proceed with its corresponding per-cpu spinlock unlocked. To achieve all this: (a) We introduce a new spinlock that is taken by the *_global_lock_online() routine and released by the *_global_unlock_online() routine. (b) We register a callback for CPU hotplug notifications, and this callback takes the same spinlock as above. (c) We maintain a bitmap which is close to the cpu_online_mask, and once it is initialized in the lock_init() code, all future updates to it are done in the callback, under the above spinlock. (d) The above bitmap is used (instead of cpu_online_mask) while locking and unlocking the per-cpu locks. The callback takes the spinlock upon the CPU_UP_PREPARE event. So, if the br_write_lock-unlock sequence is in progress, the callback keeps spinning, thus preventing the CPU online operation till the lock-unlock sequence is complete. This takes care of requirement (3). The bitmap that we maintain remains unmodified throughout the lock-unlock sequence, since all updates to it are managed by the callback, which takes the same spinlock as the one taken by the lock code and released only by the unlock routine. Combining this with (d) above, satisfies requirement (2). Overall, since we use a spinlock (mentioned in (a)) to prevent CPU hotplug operations from racing with br_write_lock-unlock, requirement (1) is also taken care of. By the way, it is to be noted that a CPU offline operation can actually run in parallel with our lock-unlock sequence, because our callback doesn't react to notifications earlier than CPU_DEAD (in order to maintain our bitmap properly). And this means, since we use our own bitmap (which is stale, on purpose) during the lock-unlock sequence, we could end up unlocking the per-cpu lock of an offline CPU (because we had locked it earlier, when the CPU was online), in order to satisfy requirement (2). But this is harmless, though it looks a bit awkward. Debugged-by: NCong Meng <mc@linux.vnet.ibm.com> Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Add a flow_cache_flush_deferred function ipv4: reintroduce route cache garbage collector net: have ipconfig not wait if no dev is available sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd asix: new device id davinci-cpdma: fix locking issue in cpdma_chan_stop sctp: fix incorrect overflow check on autoclose r8169: fix Config2 MSIEnable bit setting. llc: llc_cmsg_rcv was getting called after sk_eat_skb. net: bpf_jit: fix an off-one bug in x86_64 cond jump target iwlwifi: update SCD BC table for all SCD queues Revert "Bluetooth: Revert: Fix L2CAP connection establishment" Bluetooth: Clear RFCOMM session timer when disconnecting last channel Bluetooth: Prevent uninitialized data access in L2CAP configuration iwlwifi: allow to switch to HT40 if not associated iwlwifi: tx_sync only on PAN context mwifiex: avoid double list_del in command cancel path ath9k: fix max phy rate at rate control init nfc: signedness bug in __nci_request() iwlwifi: do not set the sequence control bit is not needed
-