Mask off the recently added DLM_LSFL_FS flag when setting the exflags.
This way all the nodes in the lockspace aren't required to have the FS
flag set, since we later check that exflags matches among all nodes.
Signed-off-by: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

There were two issues during deallocation of unlinked inodes. The
first was relating to the use of a "try" lock which in the case of
the inode lock wasn't trying hard enough to deallocate in all
circumstances (now changed to a normal glock) and in the case of
the iopen lock didn't wait for the demotion of the shared lock before
attempting to get the exclusive lock, and thereby sometimes (timing dependent)
not completing the deallocation when it should have done.

The second issue related to the lack of a way to invalidate dcache entries
on remote nodes (now fixed by this patch) which meant that unlinks were
taking a long time to return disk space to the fs. By adding some code to
invalidate the dcache entries across the cluster for unlinked inodes, that
is now fixed.

This patch was written jointly by Abhijith Das and Steven Whitehouse.
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We weren't returning the correct result when GETLK found a conflict,
which is indicated by userspace passing back a 1.

Signed-off-by: Abhijith Das <adas redhat com>
Signed-off-by: David Teigland <teigland redhat com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Set the owner field in the plock info sent to userspace for GETLK.
Without this, gfs_controld won't correctly see when the GETLK from a
process matches one of the process's existing locks.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

fs/gfs2/inode.c: In function 'gfs2_lookupi':
fs/gfs2/inode.c:392: warning: 'error' may be used uninitialized in this function

Looks like a real bug to me.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Under certain circumstances its possible (though rather unlikely) that
inodes which were unlinked by one node while still open on another might
get "lost" in the sense that they don't get deallocated if the node
which held the inode open crashed before it was unlinked.

This patch adds the recovery code which allows automatic deallocation of
the inode if its found during block allocation (the sensible time to
look for such inodes since we are scanning the rgrp's bitmaps anyway at
this time, so it adds no overhead to do this).

Since the inode will have had its i_nlink set to zero, all we need to
trigger recovery is a lookup and an iput(), and the normal deallocation
code takes care of the rest.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes bug 243131: Can't mount GFS2 file system on AoE device.
When using AoE devices with lock_nolock, there is no locking table, so
gfs2 (and gfs1) uses the superblock s_id.  This turns out to be the device
name in some cases.  In the case of AoE, the device contains a slash,
(e.g. "etherd/e1.1p2") which is an invalid character when we try to
register the table in sysfs.  This patch replaces the "/" with underscore.
Rather than add a new variable to the stack, I'm just reusing a (char *)
variable that's no longer used: table.

This code has been tested on the failing system using a RHEL5 patch.
The upstream code was tested by using gfs2_tool sb to interject a "/"
into the table name of a clustered gfs2 file system.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This fixes a bug in the ordering of operations in the error path of
createi. Its not valid to do an iput() when holding the inode's glock
since the iput() will (in this case) result in delete_inode() being
called which needs to grab the lock itself. This was causing the
recursive lock checking code to trigger.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

A typo caused us to pass a NULL pointer when renaming directories. It
was accidentally introduced in: [GFS2] Clean up inode number handling
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace.
This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL.
(This updated version of the patch uses gfp_t for ls_allocation.)
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-Off-By: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is a fix for the patch

021d2ff3a08019260a1dc002793c92d6bf18afb6

I left off a dlm_hold_rsb which causes the box to panic if you try to use
debugfs.  This patch fixes the problem.  Sorry about that,
Signed-off-by: NJosef Bacik <jwhiter@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds a nanosecond timestamp feature to the GFS2 filesystem. Due
to the way that the on-disk format works, older filesystems will just
appear to have this field set to zero. When mounted by an older version
of GFS2, the filesystem will simply ignore the extra fields so that
it will again appear to have whole second resolution, so that its
trivially backward compatible.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes some sign issues which were accidentally introduced
into the quota & statfs code during the endianess annotation process.
Also included is a general clean up which moves all of the _host
structures out of gfs2_ondisk.h (where they should not have been to
start with) and into the places where they are actually used (often only
one place). Also those _host structures which are not required any more
are removed entirely (which is the eventual plan for all of them).

The conversion routines from ondisk.c are also moved into the places
where they are actually used, which for almost every one, was just one
single place, so all those are now static functions. This also cleans up
the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__.

The net result is a reduction of about 100 lines of code, many functions
now marked static plus the bug fixes as mentioned above. For good
measure I ran the code through sparse after making these changes to
check that there are no warnings generated.

This fixes Red Hat bz #239686
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is a patch for the first three issues of RHBZ #238162

The first issue is that when you allocate a new page for a file, it will not
start off uptodate. This makes sense, since you haven't written anything to that
part of the file yet.  Unfortunately, gfs2_pin() checks to make sure that the
buffers are uptodate.  The solution to this is to mark the buffers uptodate in
gfs2_commit_write(), after they have been zeroed out and have the data written
into them.  I'm pretty confident with this fix, although it's not completely
obvious that there is no problem with marking the buffers uptodate here.

The second issue is simply that you can try to pin a data buffer that is already
on the incore log, and thus, already pinned. This patch checks to see if this
buffer is already on the log, and exits databuf_lo_add() if it is, just like
buf_lo_add() does.

The third issue is that gfs2_log_flush() doesn't do it's block accounting
correctly.  Both metadata and journaled data are logged, but gfs2_log_flush()
only compares the number of metadata blocks with the number of blocks to commit
to the ondisk journal.  This patch also counts the journaled data blocks.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch clears the user_data of active sockets as part of cleanup.
This prevents any late-arriving data from trying to add jobs to the work
queue while we are tidying up.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-Off-By: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The number of blocks which we reserve in the log at the start of each
transaction needs to depends upon the block size since the overhead is
related to the number of "pointers" which can be fitted into a single
block.

This relates to Red Hat bz #240435
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes a bug where gfs2 was writing update quota usage
information to the wrong location in the quota file.
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Display the initial value of the "protocol" config value in configfs.
The default value has always been 0 in the past anyway, so it's always
appeared to be correct.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Add a new debugfs file that dumps a compact list of mastered locks.
This will be used by a userland daemon to collect state for deadlock
detection.

Also, for the existing function that prints all lock state, lock the rsb
before going through the lock lists since they can be changing in the
course of normal dlm activity.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Add a function that can be used through libdlm by a system daemon to cancel
another process's deadlocked lock.  A completion ast with EDEADLK is returned
to the process waiting for the lock.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Various fixes related to the new timeout feature:
- add_timeout() missed setting TIMEWARN flag on lkb's when the
  TIMEOUT flag was already set
- clear_proc_locks should remove a dead process's locks from the
  timeout list
- the end-of-life calculation for user locks needs to consider that
  ETIMEDOUT is equivalent to -DLM_ECANCEL
- make initial default timewarn_cs config value visible in configfs
- change bit position of TIMEOUT_CANCEL flag so it's not copied to
  a remote master node
- set timestamp on remote lkb's so a lock dump will display the time
  they've been waiting
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

A one liner fix which got missed from the earlier patches.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Fabio Massimo Di Nitto <fabbione@ubuntu.com>
Cc: David Teigland <teigland@redhat.com>

In the rush to get the previous patch set sent, a compilation bug I fixed
shortly before sending somehow got clobbered, probably by a missed quilt
refresh or something.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Joining the lockspace should wait for the initial round of inter-node
config checks to complete before returning.  This way, if there's a
configuration mismatch between the joining node and the existing nodes,
the join can fail and return an error to the application.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix the error path when exiting new_lockspace().  It was kfree'ing the
lockspace struct at the end, but that's only valid if it exits before
kobject_register occured.  After kobject_register we have to let the
kobject do the freeing.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When conversion deadlock is detected, cancel the conversion and return
EDEADLK to the application.  This is a new default behavior where before
the dlm would allow the deadlock to exist indefinately.

The DLM_LKF_NODLCKWT flag can now be used in a conversion to prevent the
dlm from performing conversion deadlock detection/cancelation on it.
The DLM_LKF_CONVDEADLK flag can continue to be used as before to tell the
dlm to demote the granted mode of the lock being converted if it gets into
a conversion deadlock.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Change the user/kernel device interface used by libdlm:
- Add ability for userspace to check the version of the interface.  libdlm
  can now adapt to different versions of the kernel interface.
- Increase the size of the flags passed in a lock request so all possible
  flags can be used from userspace.
- Add an opaque "xid" value for each lock.  This "transaction id" will be
  used later to associate locks with each other during deadlock detection.
- Add a "timeout" value for each lock.  This is used along with the
  DLM_LKF_TIMEOUT flag.

Also, remove a fragment of unused code in device_read().

This patch requires updating libdlm which is backward compatible with
older kernels.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

New features: lock timeouts and time warnings.  If the DLM_LKF_TIMEOUT
flag is set, then the request/conversion will be canceled after waiting
the specified number of centiseconds (specified per lock).  This feature
is only available for locks requested through libdlm (can be enabled for
kernel dlm users if there's a use for it.)

If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then
a warning message will be sent to userspace (using genetlink) after a
request/conversion has been waiting for a given number of centiseconds
(configurable per node).  The time warnings will be used in the future
to do deadlock detection in userspace.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Don't let dlm_scand run during recovery since it may try to do a resource
directory removal while the directory nodes are changing.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This problem was originally reported against GFS6.1, but the same issue exists
in upstream DLM.  This patch keeps the rsb iterator assigning under the rsbtbl
list lock.  Each time we process an rsb we grab a reference to it to make sure
it is not freed out from underneath us, and then put it when we get the next rsb
in the list or move onto another list.
Signed-off-by: NJosef Bacik <jwhiter@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes an error in the quota code where a 'struct
gfs2_quota_lvb*' was being passed to gfs2_adjust_quota() instead of a
'struct gfs2_quota_data*'. Also moved 'struct gfs2_quota_lvb' from
fs/gfs2/incore.h to include/linux/gfs2_ondisk.h as per Steve's suggestion.
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch cleans up the inode number handling code. The main difference
is that instead of looking up the inodes using a struct gfs2_inum_host
we now use just the no_addr member of this structure. The tests relating
to no_formal_ino can then be done by the calling code. This has
advantages in that we want to do different things in different code
paths if the no_formal_ino doesn't match. In the NFS patch we want to
return -ESTALE, but in the ->lookup() path, its a bug in the fs if the
no_formal_ino doesn't match and thus we can withdraw in this case.

In order to later fix bz #201012, we need to be able to look up an inode
without knowing no_formal_ino, as the only information that is known to
us is the on-disk location of the inode in question.

This patch will also help us to fix bz #236099 at a later date by
cleaning up a lot of the code in that area.

There are no user visible changes as a result of this patch and there
are no changes to the on-disk format either.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch removes the completion (which is rather large) from struct
gdlm_lock in favour of using the wait_on_bit() functions. We don't need
to add any extra fields to the structure to do this, so we save 32 bytes
(on x86_64) per structure. This adds up to quite a lot when we may
potentially have millions of these lock structures,
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Acked-by: NDavid Teigland <teigland@redhat.com>

This addendum patch 2 corrects three things:

1. It fixes a stupid mistake in the previous addendum that broke gfs2.
   Ref: https://www.redhat.com/archives/cluster-devel/2007-May/msg00162.html
2. It fixes a problem that Dave Teigland pointed out regarding the
   external declarations in ops_address.h being in the wrong place.
3. It recasts a couple more %llu printks to (unsigned long long)
   as requested by Steve Whitehouse.

I would have loved to put this all in one revised patch, but there was
a rush to get some patches for RHEL5.	Therefore, the previous patches
were applied to the git tree "as is" and therefore, I'm posting another
addendum.  Sorry.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Use zero_user_page() instead of open-coding it.
Signed-off-by: NNate Diller <nate.diller@gmail.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

To avoid code redundancy, I separated out the operational "guts" into
a new function called read_rindex_entry.  Then I made two functions:
the closer-to-original gfs2_ri_update (without the special condition
checks) and gfs2_ri_update_special that's designed with that condition
in mind.  (I don't like the name, but if you have a suggestion, I'm
all ears).

Oh, and there's an added benefit:  we don't need all the ugly gotos
anymore.  ;)

This patch has been tested with gfs2_fsck_hellfire (which runs for
three and a half hours, btw).
Signed-off-By: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is another revision of my gfs2 kernel patch that allows
gfs2_grow to function properly.

Steve Whitehouse expressed some concerns about the previous
patch and I restructured it based on his comments.
The previous patch was doing the statfs_change at file close time,
under its own transaction.  The current patch does the statfs_change
inside the gfs2_commit_write function, which keeps it under the
umbrella of the inode transaction.

I can't call ri_update to re-read the rindex file during the
transaction because the transaction may have outstanding unwritten
buffers attached to the rgrps that would be otherwise blown away.
So instead, I created a new function, gfs2_ri_total, that will
re-read the rindex file just to total the file system space
for the sake of the statfs_change.  The ri_update will happen
later, when gfs2 realizes the version number has changed, as it
happened before my patch.

Since the statfs_change is happening at write_commit time and there
may be multiple writes to the rindex file for one grow operation.
So one consequence of this restructuring is that instead of getting
one kernel message to indicate the change, you may see several.
For example, before when you did a gfs2_grow, you'd get a single
message like:

GFS2: File system extended by 247876 blocks (968MB)

Now you get something like:

GFS2: File system extended by 207896 blocks (812MB)
GFS2: File system extended by 39980 blocks (156MB)

This version has also been successfully run against the hours-long
"gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck
while interjecting file system damage.  It does this repeatedly
under a variety Resource Group conditions.
Signed-off-By: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix two races in fs/dlm/config.c:

(1) Grab the configfs subsystem semaphore before calling
config_group_find_obj() in get_space(). This solves a potential race
between get_space() and concurrent mkdir(2) or rmdir(2).

(2) Grab a reference on the found config_item _while_ holding the configfs
subsystem semaphore in get_comm(), and not after it. This solves a
potential race between get_comm() and concurrent rmdir(2).
Signed-off-by: NSatyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix for bz #231910
When filemap_fdatawrite() is called on the inode mapping in data=ordered mode,
it will add the glock to the log. In inode_go_sync(), if you do the
gfs2_log_flush() before this, after the filemap_fdatawrite() call, the glock
and its associated data buffers will be on the log again. This means you can
demote a lock from exclusive, without having it flushed from the log. The
attached patch simply moves the gfs2_log_flush up to after the
filemap_fdatawrite() call.

Originally, I tried moving the gfs2_log_flush to after gfs2_meta_sync(), but
that caused me to trip the following assert.

GFS2: fsid=cypher-36:test.0: fatal: assertion "!buffer_busy(bh)" failed
GFS2: fsid=cypher-36:test.0:   function = gfs2_ail_empty_gl, file = fs/gfs2/glops.c, line = 61

It appears that gfs2_log_flush() puts some of the glocks buffers in the busy
state and the filemap_fdatawrite() call is necessary to flush them. This makes
me worry slightly that a related problem could happen because of moving the
gfs2_log_flush() after the initial filemap_fdatawrite(), but I assume that
gfs2_ail_empty_gl() would catch that case as well.
Signed-off-by: NBenjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Commit 1c710c89 added the utimensat()
system call, but didn't handle the case of checking for the writability
of the target right, when the target was a file descriptor, not a
filename.

We cannot use vfs_permission(MAY_WRITE) for that case, and need to
simply check whether the file descriptor is writable.  The oops from
using the wrong function was noticed and narrowed down by Markus
Trippelsdorf.

Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NAl Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>