- 24 10月, 2012 10 次提交
-
-
由 Jussi Kivilinna 提交于
Introduce new assembler functions to avoid use temporary stack buffers in glue code. This also allows use of vector instructions for xoring output in CTR and CBC modes and construction of IVs for CTR mode. ECB mode sees ~0.5% decrease in speed because added one extra function call. CBC mode decryption and CTR mode benefit from vector operations and gain ~3%. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Introduce new assembler functions to avoid use temporary stack buffers in glue code. This also allows use of vector instructions for xoring output in CTR and CBC modes and construction of IVs for CTR mode. ECB mode sees ~0.2% decrease in speed because added one extra function call. CBC mode decryption and CTR mode benefit from vector operations and gain ~3%. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Introduce new assembler functions to avoid use temporary stack buffers in glue code. This also allows use of vector instructions for xoring output in CTR and CBC modes and construction of IVs for CTR mode. ECB mode sees ~0.5% decrease in speed because added one extra function call. CBC mode decryption and CTR mode benefit from vector operations and gain ~2%. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
'u128' currently used for CTR mode is on little-endian 'long long' swapped and would require extra swap operations by SSE/AVX code. Use of le128 instead of u128 allows IV calculations to be done with vector registers easier. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Most DES3_EDE testvectors are short and do not test parallelised codepaths well. Add larger testvectors to test large crypto operations and to test multi-page crypto with DES3_EDE. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Most DES testvectors are short and do not test parallelised codepaths well. Add larger testvectors to test large crypto operations and to test multi-page crypto with DES. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Most AES testvectors are short and do not test parallelised codepaths well. Add larger testvectors to test large crypto operations and to test multi-page crypto with AES. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
AVX2 implementation of serpent cipher processes 16 blocks parallel, so we need to make test vectors larger to check parallel code paths. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
AVX2 implementation of blowfish cipher processes 32 blocks parallel, so we need to make test vectors larger to check parallel code paths. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
AVX/AES-NI implementation of camellia cipher processes 16 blocks parallel, so we need to make test vectors larger to check parallel code paths. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 15 10月, 2012 10 次提交
-
-
由 Salman Qazi 提交于
VMAC implementation, as it is, does not work with blocks that are not multiples of 128-bytes. Furthermore, this is a problem when using the implementation on scatterlists, even when the complete plain text is 128-byte multiple, as the pieces that get passed to vmac_update can be pretty much any size. I also added test cases for unaligned blocks. Signed-off-by: NSalman Qazi <sqazi@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Wei Yongjun 提交于
Convert cpu_to_be16(be16_to_cpu(E1) + E2) to use be16_add_cpu(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tim Chen 提交于
This patch adds a test case in tcrypt to perform speed test for crc32c checksum calculation. Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tim Chen 提交于
This patch adds the crc_pcl function that calculates CRC32C checksum using the PCLMULQDQ instruction on processors that support this feature. This will provide speedup over using CRC32 instruction only. The usage of PCLMULQDQ necessitate the invocation of kernel_fpu_begin and kernel_fpu_end and incur some overhead. So the new crc_pcl function is only invoked for buffer size of 512 bytes or more. Larger sized buffers will expect to see greater speedup. This feature is best used coupled with eager_fpu which reduces the kernel_fpu_begin/end overhead. For buffer size of 1K the speedup is around 1.6x and for buffer size greater than 4K, the speedup is around 3x compared to original implementation in crc32c-intel module. Test was performed on Sandy Bridge based platform with constant frequency set for cpu. A white paper detailing the algorithm can be found here: http://download.intel.com/design/intarch/papers/323405.pdfSigned-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tim Chen 提交于
This patch renames the crc32c-intel.c file to crc32c-intel_glue.c file in preparation for linking with the new crc32c-pcl-intel-asm.S file, which contains optimized crc32c calculation based on PCLMULQDQ instruction. Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Linus Torvalds 提交于
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
-
由 Matt Fleming 提交于
The hostprogs need access to the CONFIG_* symbols found in include/generated/autoconf.h. But commit abbf1590 ("UAPI: Partition the header include path sets and add uapi/ header directories") replaced $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary include paths. This has the undesirable effect of breaking the EFI boot stub because the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is never compiled. It should also be noted that because $(USERINCLUDE) isn't exported by the top-level Makefile it's actually empty in arch/x86/boot/Makefile. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
The UAPI commits forgot to test tooling builds such as tools/perf/, and this fixes the fallout. Manual conversion. Signed-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2012 9 次提交
-
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM update from Russell King: "This is the final round of stuff for ARM, left until the end of the merge window to reduce the number of conflicts. This set contains the ARM part of David Howells UAPI changes, and a fix to the ordering of 'select' statements in ARM Kconfig files (see the appropriate commit for why this happened - thanks to Andrew Morton for pointing out the problem.) I've left this as long as I dare for this window to avoid conflicts, and I regenerated the config patch yesterday, posting it to our mailing list for review and testing. I have several acks which include successful test reports for it. However, today I notice we've got new conflicts with previously unseen code... though that conflict should be trivial (it's my changes vs a one liner.)" * 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate arch/arm/include/asm Fix up fairly conflict in arch/arm/Kconfig (the select re-organization vs recent addition of GENERIC_KERNEL_EXECVE)
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells: "The patches contained herein do the following: (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked this with Paul Mackerras before I created the patch and he suggested some extra bits to unexport. (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace applicable, and remove from the UAPI that part of linux/fs.h that was the reason for linux/blk_types.h being exported in the first place. I discussed this with Jens Axboe before creating the patch. (3) The big patch of the series to disintegrate include/linux/*.h as a unit. This could be split up, though there would be collisions in moving stuff between the two Kbuild files when the parts are merged as that file is sorted alphabetically rather than being grouped by subsystem. Of this set of headers, 17 files have changed in the UAPI exported region since the 4th and only 8 since the 9th so there isn't much change in this area - as one might expect. It should be pretty obvious and straightforward if it does come to fixing up: stuff in __KERNEL__ guards stays where it is and stuff outside moves to the same file in the include/uapi/linux/ directory. If a new file appears then things get a bit more complicated as the "headers +=" line has to move to include/uapi/linux/Kbuild. Only one new file has appeared since the 9th and I judge this type of event relatively unlikely. (4) A patch to disintegrate include/linux/byteorder/*.h as a unit. Signed-off-by: David Howells <dhowells@redhat.com>" * tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull spi UAPI disintegration from David Howells: "This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>" * tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/spi
-
git://openrisc.net/jonas/linux由 Linus Torvalds 提交于
Pull OpenRISC uapi disintegration from Jonas Bonn: "OpenRISC UAPI disintegration work from David Howells" * tag 'openrisc-uapi' of git://openrisc.net/jonas/linux: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull user namespace compile fixes from Eric W Biederman: "This tree contains three trivial fixes. One compiler warning, one thinko fix, and one build fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from NeilBrown: - "discard" support, some dm-raid improvements and other assorted bits and pieces. * tag 'md-3.7' of git://neil.brown.name/md: (29 commits) md: refine reporting of resync/reshape delays. md/raid5: be careful not to resize_stripes too big. md: make sure manual changes to recovery checkpoint are saved. md/raid10: use correct limit variable md: writing to sync_action should clear the read-auto state. Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races md/raid5: make sure to_read and to_write never go negative. md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write. md/raid5: protect debug message against NULL derefernce. md/raid5: add some missing locking in handle_failed_stripe. MD: raid5 avoid unnecessary zero page for trim MD: raid5 trim support md/bitmap:Don't use IS_ERR to judge alloc_page(). md/raid1: Don't release reference to device while handling read error. raid: replace list_for_each_continue_rcu with new interface add further __init annotations to crypto/xor.c DM RAID: Fix for "sync" directive ineffectiveness DM RAID: Fix comparison of index and quantity for "rebuild" parameter DM RAID: Add rebuild capability for RAID10 DM RAID: Move 'rebuild' checking code to its own function ...
-
由 Russell King 提交于
-
由 Russell King 提交于
The large platform selection choice should be sorted by option string so it's easy to find the platform you're looking for. Fix the few options which are out of this order. Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: NJason Cooper <jason@lakedaemon.net> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 10月, 2012 11 次提交
-
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
由 David Howells 提交于
It seems that was linux/blk_types.h incorrectly exported to fix up some missing bits required by the exported parts of linux/fs.h (READ, WRITE, READA, etc.). So unexport linux/blk_types.h and unexport the relevant bits of linux/fs.h. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Jens Axboe <jaxboe@fusionio.com> cc: Tejun Heo <tj@kernel.org> cc: Al Viro <viro@ZenIV.linux.org.uk>
-
由 David Howells 提交于
Unexport part of linux/ppp-comp.h as userspace can't make use of that bit. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Paul Mackerras <paulus@samba.org> cc: David Miller <davem@davemloft.net>
-
git://git.infradead.org/users/dhowells/linux-headers由 Jonas Bonn 提交于
UAPI Disintegration 2012-10-09 * tag 'disintegrate-openrisc-20121009' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull TPM bugfixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: Propagate error from tpm_transmit to fix a timeout hang driver/char/tpm: fix regression causesd by ppi
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull ACPI & Thermal updates from Len Brown: "The generic Linux thermal layer is gaining some new capabilities (generic cooling via cpufreq) and some new customers (ARM). Also, an ACPI EC bug fix plus a regression fix." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits) tools/power/acpi/acpidump: remove duplicated include from acpidump.c ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug cpuidle / ACPI: fix potential NULL pointer dereference ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop ACPI: EC: Make the GPE storm threshold a module parameter thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal() Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem. thermal: exynos: Use devm_* functions ARM: exynos: add thermal sensor driver platform data support thermal: exynos: register the tmu sensor with the kernel thermal layer thermal: exynos5: add exynos5250 thermal sensor driver support hwmon: exynos4: move thermal sensor driver to driver/thermal directory thermal: add generic cpufreq cooling implementation Fix a build error. thermal: Fix potential NULL pointer accesses thermal: add Renesas R-Car thermal sensor support thermal: fix potential out-of-bounds memory access Thermal: Introduce locking for cdev.thermal_instances list. Thermal: Unify the code for both active and passive cooling Thermal: Introduce simple arbitrator for setting device cooling state ...
-
git://openrisc.net/jonas/linux由 Linus Torvalds 提交于
Pull OpenRISC updates from Jonas Bonn: "Fixups for some corner cases, build issues, and some obvious bugs in IRQ handling. No major changes." * tag 'for-3.7' of git://openrisc.net/jonas/linux: openrisc: mask interrupts in irq_mask_ack function openrisc: fix typos in comments and warnings openrisc: PIC should act on domain-local irqs openrisc: Make cpu_relax() invoke barrier() audit: define AUDIT_ARCH_OPENRISC openrisc: delay: fix handling of counter overflow openrisc: delay: fix loops calculation for __const_udelay
-
由 Linus Torvalds 提交于
Merge tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers Pull UAPI disintegration for misc arches from David Howells: "UAPI disintegration for MN10300, FRV and AVR32 arches" * tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/mn10300/include/asm UAPI: (Scripted) Disintegrate arch/frv/include/asm UAPI: (Scripted) Disintegrate arch/avr32/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc uapi disintegration from Benjamin Herrenschmidt. * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: UAPI: (Scripted) Disintegrate arch/powerpc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64由 Linus Torvalds 提交于
Pull arm64 uapi disintegration from Catalin Marinas: "UAPI headers for arm64 together with some clean-up to make it possible: - Do not export the COMPAT_* definitions to user - Simplify the compat unistd32.h definitions and remove the __SYSCALL_COMPAT guard - Disintegrate the arch/arm64/include/asm/* headers" * tag 'arm64-uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: UAPI: (Scripted) Disintegrate arch/arm64/include/asm arm64: Do not export the compat-specific definitions to the user arm64: Do not include asm/unistd32.h in asm/unistd.h arm64: Remove unused definitions from asm/unistd32.h
-