We can keep the state among the other fs_info flags, there's no reason
why fs_frozen would need to be separate.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The pattern when err is used for function exit and ret is used for
return values of callees is not used here.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The function is called from ioctl context and we don't hold any locks
that take part in writeback. Right now it's only fs_info::volume_mutex.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We don't hold any locks here. Inidirectly called from statfs.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Submit and wait parts of write_dev_flush() can be split into two
separate functions for better readability.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There is no extra benefit to count null bdev during the submit loop,
as these null devices will be anyway checked during command
completion device loop just after the submit loop. We are holding the
device_list_mutex, the device->bdev status won't change in between.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since commit "btrfs: btrfs_io_bio_alloc never fails, skip error handling"
write_dev_flush will not return ENOMEM in the sending part. We do not
need to check for it in the callers.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ updated changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We already skip storing data where compression does not make the result
at least one byte less.  Let's make the logic better and check
that compression frees at least one sector size of bytes, otherwise it's
not that useful.
Signed-off-by: NTimofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ changelog updated ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can hardcode GFP_NOFS to btrfs_io_bio_alloc, although it means we
change it back from GFP_KERNEL in scrub. I'd rather save a few stack
bytes from not passing the gfp flags in the remaining, more imporatant,
contexts and the bio allocating API now looks more consistent.
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We use btrfs_bioset for bios and ask to allocate the entire size of
btrfs_io_bio from btrfs bio_alloc_bioset. The member 'bio' is
initialized but the bytes from 0 to offset of 'bio' are left
uninitialized. Although we initialize some of the members in our
helpers, we should initialize the whole structures.
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

A programmer who is trying to implement calling the btrfs SEARCH
or SEARCH_V2 ioctl will probably soon end up reading this struct
definition.

Properly document the input fields to prevent common misconceptions:
 1. The search space is linear, not 3 dimensional. The invidual min/max
 values for objectid, type and offset cannot be used to filter the
 result, they only define the endpoints of an interval.
 2. The transaction id (a.k.a. generation) filter applies only on
 transaction id of the last COW operation on a whole metadata page, not
 on individual items.

Ad 1. The first misunderstanding was helped by the previous misleading
comments on min/max type and offset:
  "keys returned will be >= min and <= max".

Ad 2. For example, running btrfs balance will happily cause rewriting of
metadata pages that contain a filesystem tree of a read only subvolume,
causing transids to be increased.

Also, improve descriptions of tree_id and nr_items and add in/out
annotations.
Signed-off-by: NHans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently dio read also goes to verify checksum if -EIO has been returned,
although it usually fails on checksum, it's not necessary at all, we could
directly check if there is another copy to read.

And with this, the behavior of dio read is now consistent with that of
buffered read.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ use bool for uptodate ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

With raid1 profile, dio read isn't tolerating IO errors if read length is
less than the stripe length (64K).

Our bio didn't get split in btrfs_submit_direct_hook() if (dip->flags &
BTRFS_DIO_ORIG_BIO_SUBMITTED) is true and that happens when the read
length is less than 64k.  In this case, if the underlying device returns
error somehow, bio->bi_error has recorded that error.

If we could recover the correct data from another copy in profile raid1/10/5/6,
with btrfs_subio_endio_read() returning 0, bio would have the correct data in
its vector, but bio->bi_error is not updated accordingly so that the following
dio_end_io(dio_bio, bio->bi_error) makes directIO think this read has failed.

This fixes the problem by setting bio's error to 0 if a good copy has been
found.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Most callers of btrfs_bio_alloc convert from bytes to sectors. Hide that
in the helper and simplify the logic in the callsers.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

compressed_bio_alloc is now a trivial wrapper around btrfs_bio_alloc, no
point keeping it. The error handling can be simplified, as we know
btrfs_bio_alloc will never fail.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All callers pass gfp_flags=GFP_NOFS and nr_vecs=BIO_MAX_PAGES.

submit_extent_page adds __GFP_HIGH that does not make a difference in
our case as it allows access to memory reserves but otherwise does not
change the constraints.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All callers pass GFP_NOFS.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Update direct callers of btrfs_io_bio_alloc that do error handling, that
we can now remove.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Update direct callers of btrfs_bio_clone that do error handling, that we
can now remove.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Update direct callers of btrfs_bio_alloc that do error handling, that we
can now remove.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Christoph pointed out that bio allocations backed by a bioset will never
fail.  As we always use a bioset for all bio allocations, we can skip
the error handling.  This patch adjusts our low-level helpers, the
cascaded changes to all callers will come next.

CC: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The compression workspace buffers are larger than a page so we use
vmalloc, unconditionally. This is not always necessary as there might be
contiguous memory available.

Let's use the kvmalloc helpers that will try kmalloc first and fallback
to vmalloc. For that they require GFP_KERNEL flags. As we now have the
alloc_workspace calls protected by memalloc_nofs in the critical
contexts, we can safely use GFP_KERNEL.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

As alloc_workspace is now protected by memalloc_nofs where needed,
we can switch the kmalloc to use GFP_KERNEL.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The workspaces are preallocated at the beginning where we can safely use
GFP_KERNEL, but in some cases the find_workspace might reach the
allocation again, now in a more restricted context when the bios or
pages are being compressed.

To avoid potential lockup when alloc_workspace -> vmalloc would silently
use the GFP_KERNEL, add the memalloc_nofs helpers around the critical
call site.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

As we don't use vmalloc/vzalloc/vfree directly in ctree.c, we can now
use the proper header that defines kvmalloc.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that init_ipath is called either from a safe context or with
memalloc_nofs protection, we can switch to GFP_KERNEL allocations in
init_path and init_data_container.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

init_ipath is called from a safe ioctl context and from scrub when
printing an error.  The protection is added for three reasons:

* init_data_container calls vmalloc and this does not work as expected
  in the GFP_NOFS context, so this silently does GFP_KERNEL and might
  deadlock in some cases
* keep the context constraint of GFP_NOFS, used by scrub
* we want to use GFP_KERNEL unconditionally inside init_ipath or its
  callees
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We use a growing buffer for xattrs larger than a page size, at some
point vmalloc is unconditionally used for larger buffers. We can still
try to avoid it using the kvmalloc helper.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The logic of kmalloc and vmalloc fallback is opencoded in
several places, we can now use the existing helper.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Logic already skips if compression makes data bigger, let's sync lzo
with zlib and also return error if compressed size is equal to
input size.
Signed-off-by: NTimofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

bio_io_error was introduced in the commit 4246a0b6
("block: add a bi_error field to struct bio"), so use it to simplify
code.
Signed-off-by: NGuoqing Jiang <gqjiang@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

First, instead of open-coding the vmalloc() fallback, use the new
kvzalloc() helper. Second, use memalloc_nofs_{save,restore}() instead of
GFP_NOFS, as vmalloc() uses some GFP_KERNEL allocations internally which
could lead to deadlocks.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Observing the number of slab objects of btrfs_transaction, there's just
one active on an almost quiescent filesystem, and the number of objects
goes to about ten when sync is in progress. Then the nubmer goes down to
1.  This matches the expectations of the transaction lifetime.

For such use the separate slab cache is not justified, as we do not
reuse objects frequently. For the shortlived transaction, the generic
slab (size 512) should be ok. We can optimistically expect that the 512
slabs are not all used (fragmentation) and there are free slots to take
when we do the allocation, compared to potentially allocating a whole new
page for the separate slab.

We'll lose the stats about the object use, which could be added later if
we really need them.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The structure scrub_wr_ctx is not used anywhere just the scrub context,
we can move the members there. The tgtdev is renamed so it's more clear
that it belongs to the "wr" part.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

As we now have the node/block sizes in fs_info, we can use them and can
drop the local copies.
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Return enhanced file attributes from the btrfs, including:
  (1). inode creation time as stx_btime, and
  (2). Certain BTRFS_INODE_xxx flags are mapped to stx_attributes flags.

Example output:
	[root@localhost ~]# cat t.sh
	touch t
	chattr +aic t
	~/linux/samples/statx/test-statx t
	chattr -aic t
	touch t
	echo "========================================"
	~/linux/samples/statx/test-statx t
	/bin/rm t
	[root@localhost ~]# ./t.sh
	statx(t) = 0
	results=fff
  	  Size: 0               Blocks: 0          IO Block: 4096    regular file
	Device: 00:1c           Inode: 63962       Links: 1
	Access: (0644/-rw-r--r--)  Uid:     0   Gid:     0
	Access: 2017-05-11 16:03:13.999856591-0700
	Modify: 2017-05-11 16:03:13.999856591-0700
	Change: 2017-05-11 16:03:14.000856663-0700
 	 Birth: 2017-05-11 16:03:13.999856591-0700
	Attributes: 0000000000000034 (........ ........ ........ ........ ........ ........ ........ .-ai.c..)
	========================================
	statx(t) = 0
	results=fff
	  Size: 0               Blocks: 0          IO Block: 4096    regular file
	Device: 00:1c           Inode: 63962       Links: 1
	Access: (0644/-rw-r--r--)  Uid:     0   Gid:     0
	Access: 2017-05-11 16:03:14.006857097-0700
	Modify: 2017-05-11 16:03:14.006857097-0700
	Change: 2017-05-11 16:03:14.006857097-0700
 	Birth: 2017-05-11 16:03:13.999856591-0700
	Attributes: 0000000000000000 (........ ........ ........ ........ ........ ........ ........ .---.-..)
	[root@localhost ~]#
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Fix copy paste typo in debug message for lzo.c, lzo is not deflate.
Signed-off-by: NTimofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Nothing checks its return value.

Is it safe to skip checking return value of btrfs_wait_tree_block_writeback?

Liu Bo: I think yes, it's used in walk_log_tree which is called in two
places, free_log_tree and log replay.  For free_log_tree, it waits for
any running writeback of the extent buffer under freeing to finish in
case we need to access the eb pointer from page->private, and it's OK to
not check the return value, while for log replay, it's doesn't wait
because wc->wait is not set. So neither cares about the writeback error.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
[ added more explanation to changelog, from Liu Bo ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>