- 14 10月, 2007 40 次提交
-
-
由 Stephen Rothwell 提交于
The name field of of_platform_driver is just copied into the included device_driver. By not overriding an already initialised device_driver name, we can convert the drivers over time to stop using the of_platform_driver name. Also we were not copying the owner field from of_platform_driver, so do the same with it. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Reif 提交于
Added asm-sparc/irqflags.h and moved irq related code from system.h to it. Renamed local_irq functions to raw_local_irq in irq.c. Modified system.h to include linux/irqflags.h which includes asm/irqflags.h. Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug. This is the first step in adding IRQ-flags state tracing as outlined in Documentation/irqflags-tracing.txt. These changes should be harmless because they just move things around and rename them. The next step is making the lowlevel entry code modifications which to be honest are beyond my capabilities at this point. Boot tested on an ss20 running an SMP kernel. Signed-off-by: NRobert Reif <reif@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Apply a consistent format to vmlinux.lds. The file is now to some degree readable. In addition move several labels inside the braces such that they reflect the actual start address of a section. Without this the label would not reflect if ld added alignment. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Make vmlinux.lds almost readable. When going through the file fixed the following: - Use PAGE_SIZE as replacement for hardcoded 4096 - Moves label definitions inside {} to avoid ld alignment that may be added between label and section Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The support code is identical to the hypervisor sun4v stuff, just replacing the hypervisor calls with register reads and writes in the Fire controller. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krzysztof Helt 提交于
This patch cleans up the driver a bit. It contains coding style fixes (pointed by Lindent and checkpatch) and white space clean ups. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krzysztof Helt 提交于
This patch adds accelerated copyarea and sets READS_FAST flag. This doubles scrolling speed on SparcStation20 85MHz. It also fixes a comment in cg6_fillrect function. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krzysztof Helt 提交于
This patch: - corrects coding style errors pointed by Lindent and checkpatch - replaces space chunks with tabs - removes one redundant include - improves indentations of defines - removes from comments leftovers from skeletonfb - adds __devinit attribute to two init functions Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Fix infinite loop on device initialization
-
由 Jean Delvare 提交于
The i2c-nforce2 driver has SMBus PEC support, so it should say so. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Oleg Ryjkov 提交于
This patch is to add an abort function that will bring back the MCP51/55 controller if it was blocked by a block-read operation, in particular. (When a slave sends a wrong byte count on a byte read, the host gets locked up). I've only tested it on an MCP51 and MCP55. However, I'm almost certain it will also work on MCP65, I just did not have the board to test it on. Thus for now the abort function will only be called if an MCP51/55 was detected. Signed-off-by: NOleg Ryjkov <olegr@olegr.ca> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Oleg Ryjkov 提交于
This is the first part of the patch that adds a function to reset the nvidia MCP51/55 i2c controller, if something bad happens to it (e.g. a slave sends a wrong byte count during a block transaction). This patch just adds nforce2_check_status function. It was originally written by Hans-Frieder Vogt. The reason that I'm the one sending it is: - I relied on it for the second part of the patch, - It makes the driver code cleaner/better. Signed-off-by: NOleg Ryjkov <olegr@olegr.ca> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Chris David 提交于
Fix a "mis-used register" problem on the AMD MIPS Alchemy au1550 I2C interface. In summary, the programmable serial controller seems to hang the kernel when I send a single 'address' byte on the I2C bus. The patch essentially uses the PSC_SMBSTAT register's TE (transmit FIFO empty) bit to check when the transmit FIFO is empty, instead of using the PSC_SMBEVNT register's TU (transmit underflow) bit. Using the TE bit fixed the hang problem. Signed-off-by: NChris David <cd@chrisdavid.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Rename I2C_FUNC_SMBUS_HWPEC_CALC as I2C_FUNC_SMBUS_PEC, and list that functionality as always available through the software implementation. Update documentation accordingly (and list similar requirements). The way it's currently packaged doesn't present the capability in a useful way. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Mark the i2c-at91 driver BROKEN in Kconfig, and explain just why it's broken. (Summary: hardware design issues.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Move the i2c-dev support into <linux/i2c-dev.h> where it should always have lived. Now <linux/i2c.h> no longer holds stuff related to the optional userspace /dev/i2c-X interface. Improve the descriptions for these ioctl requests. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
This removes: - An effectively unused hook: i2c_algorithm.algo_control. - The i2c_control() call, used only by i2c-dev to call that unused hook or set two barely supported adapter params. (That param setting moves into i2c-dev.c ... still iffy due to lack of locking, but no other changes.) As shown by diffstat, this is a net code shrink. It also reduces the complexity of the I2C adapter and /dev interfaces. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
i2c_algorithm.algo_control is about to be removed. Signed-off-by: NJean Delvare <khali@linux-fr.org> Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 David Brownell 提交于
This removes NOP implementations of i2c_algorithm.algo_control. With this change, there are no implementations of this hook in the kernel.org tree ... that hook seems about ripe to remove. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
The I2C_M_RECV_LEN calling convention for i2c_mesg.flags involves playing games with reported buffer lengths. (They start out less than their actual size, and the length is then modified to reflect how many bytes were delivered ... which one hopes is less than the presumed actual size.) Refuse to play such error prone games across the boundary between userspace and kernel. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Add support for multiple chips to i2c-stub. I've changed the memory allocation scheme from static to dynamic, so that we don't waste too much memory. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Francis Moreau 提交于
Remove this unneeded mutex. Indeed it was used to serialize access to the hardware, but this is already done by the i2c-core layer, see 'bus_lock' mutex used by i2c_transfer(). Signed-off-by: NFrancis Moreau <francis.moro@gmail.com> Acked-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jason Gaston 提交于
Add the Intel Tolapai SMBus Controller DID. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Clarify use of the I2C_M_* flags by highlighting the fact that most of them depend on I2C_FUNC_PROTOCOL_MANGLING. Also provide kerneldoc for i2c_smbus_read_block_data() and also for "struct i2c_msg". Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Do not initialize the PCF8574 with an arbitrary value. Users will have to write the initial value to sysfs themselves. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Vladimir Barinov 提交于
Signed-off-by: NVladimir Barinov <vbarinov@ru.mvista.com> Acked-by: NTrilok Soni <soni.trilok@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Stefan Roese 提交于
Use i2c_bit_add_numbered_adapter() if device id specified, so that the i2c-ibm_iic adapter works well with new-style pre-declared devices. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Switch the tps65010 driver into a "new-style" I2C driver, and convert all of its in-tree users (board support for OSK, H2, H3) accordingly. That accounts for most of the board-specific code in this driver; the rest of that code is now moved into board-specific initcalls. Also remove some of the many now-superfluous #includes. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Prepare to convert tps65010 driver to "new style" driver by changing how it references the i2c_client. This lets the eventual patch with driver and platform updates be smaller. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Adrian Bunk 提交于
After the i2c-isa removal some code can become static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
We need to be able to flag I2C devices, such as RTCs, which can issue wake events (usually through IRQ lines). This adds an i2c_board_info.flags bit, and uses it to initialize the i2c device node. (And shrinks a few lines that were overly long.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
I2C devices do not have any form of ID as PCI or USB devices have. No driver uses "MODULE_DEVICE_TABLE(i2c, ...)" because it doesn't make sense. So we can get rid of struct i2c_device_id and the associated support code. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com>
-
由 Roland Dreier 提交于
Commit 3d73c288 ("mlx4_core: Fix section mismatches") introduced a stupid bug in device init: when some of mlx4_init_one() was split off into __mlx4_init_one(), the call from the main mlx4_init_one() function was back to mlx4_init_one() rather than to __mlx4_init_one(), which leads to an obvious infinite loop if the function is every called. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
... and yes, caller wants it to return int. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Kleikamp 提交于
commit e30408b2 ("JFS: fix bio-related build breakage") removed some "return 0;" statements, rather than changing them to null returns. Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] SMP: Fix use of cpumasks. [MIPS] Revert "[MIPS] tlbex.c: Cleanup __init usage." [MIPS] CFE: Add missing parenthesis.
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits) alim15x3: remove redundant m5229_revision check sc1200: fix ->dma_base equal zero handling cs5520: fix ->dma_base equal zero handling sgiioc4: add missing ->dma_base check cs5535: add missing ->dma_base check ide: remove CONFIG_IDEDMA_IVB config option ide: change master/slave IDENTIFY order ide: move ide_config_drive_speed() calls to upper layers (take 2) pdc202xx_new: check ide_config_drive_speed() return value cs5535: check ide_config_drive_speed() return value amd74xx/via82cxxx: check ide_config_drive_speed() return value au1xxx: fix au1xxx_set_pio_mode() icside: use ide_tune_dma() ide-pmac: fix PIO setup and enable autotune ide-pmac: use ide_tune_dma() (take 2) ide-pmac: remove pmac_ide_do_setfeature() (take 2) ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature() ide-pmac: use __ide_wait_stat() ide-pmac: remove extra good status wait from pmac_ide_do_setfeature() ide: add __ide_wait_stat() helper ...
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: (91 commits) [MTD] [NAND] Blackfin on-chip NAND Flash Controller driver [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug [MTD] [NAND] Fix compiler warning in Alauda driver [JFFS2] Remove stray debugging printk [JFFS2] Handle dirents on the flash with embedded zero bytes in names. [JFFS2] Check for creation of dirents with embedded zero bytes in name. [JFFS2] Don't count all 'very dirty' blocks except in debug mode [JFFS2] Check whether garbage-collection actually obsoleted its victim. [JFFS2] Relax threshold for triggering GC due to dirty blocks. [MTD] [OneNAND] Fix typo related with recent commit [JFFS2] Trigger garbage collection when very_dirty_list size becomes excessive [MTD] [NAND] Avoid deadlock in erase callback; release chip lock first. [MTD] [NAND] Resume method for CAFÉ NAND controller [MTD] [NAND] Fix PCI ident table for CAFÉ NAND controller. [MTD] [NAND] s3c2410: fix arch moves [MTD] [OneNAND] fix numerous races [MTD] map driver for NOR flash on the Intel Vermilion Range chipset [JFFS2] Fix unpoint length [MTD] fix CFI point method for discontiguous maps [MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (106 commits) KVM: Replace enum by #define KVM: Skip pio instruction when it is emulated, not executed KVM: x86 emulator: popf KVM: x86 emulator: fix src, dst value initialization KVM: x86 emulator: jmp abs KVM: x86 emulator: lea KVM: X86 emulator: jump conditional short KVM: x86 emulator: imlpement jump conditional relative KVM: x86 emulator: sort opcodes into ascending order KVM: Improve emulation failure reporting KVM: x86 emulator: pushf KVM: x86 emulator: call near KVM: x86 emulator: push imm8 KVM: VMX: Fix exit qualification width on i386 KVM: Move main vcpu loop into subarch independent code KVM: VMX: Move vm entry failure handling to the exit handler KVM: MMU: Don't do GFP_NOWAIT allocations KVM: Rename kvm_arch_ops to kvm_x86_ops KVM: Simplify memory allocation KVM: Hoist SVM's get_cs_db_l_bits into core code. ...
-