The real time counter also called master counter, is a free-running
counter. It produces the count used by the CPU local timer peripherals
in the MPU cluster. The timer counts at a rate of 6.144 MHz.

The ratio registers needs to be configured based on system clock
only onetime. After initialisation, hardware takes care of adjusting
the clock in different low power modes to keep counter rate constant.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Pull mfd fixes from Samuel Ortiz:
 "This is the remaining MFD fixes for 3.6, with 5 pending fixes:

   - A tps65217 build error fix.
   - A lcp_ich regression fix caused by the MFD driver failing to
     initialize the watchdog sub device due to ACPI conflicts.
   - 2 MAX77693 interrupt handling bug fixes.
   - An MFD core fix, adding an IRQ domain argument to the MFD device
     addition API in order to prevent silent and potentially harmful
     remapping behaviour changes for drivers supporting non-DT
     platforms."

* tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: MAX77693: Fix NULL pointer error when initializing irqs
  mfd: MAX77693: Fix interrupt handling bug
  mfd: core: Push irqdomain mapping out into devices
  mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver
  mfd: Move tps65217 regulator plat data handling to regulator

Pull pwm fixes from Thierry Reding:
 "While this comes a bit later than I had wished, both patches are
  rather minor and touch only new drivers so I think these are still
  safe for merging."

* tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pwm-tiehrpwm: Fix conflicting channel period setting
  pwm: pwm-tiecap: Disable APWM mode after configure

Pull scsi target fixes from Nicholas Bellinger:
 "Here is the current set of target-pending fixes headed for v3.6-final

  The main parts of this series include bug-fixes from Paolo Bonzini to
  address an use-after-free bug in pSCSI sense exception handling, along
  with addressing some long-standing bugs wrt the handling of zero-
  length SCSI CDB payloads also specific to pSCSI pass-through device
  backends."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: go through normal processing for zero-length REQUEST_SENSE
  target: support zero allocation length in REQUEST SENSE
  target: support zero-size allocation lengths in transport_kmap_data_sg
  target: fail REPORT LUNS with less than 16 bytes of payload
  target: report too-small parameter lists everywhere
  target: go through normal processing for zero-length PSCSI commands
  target: fix use-after-free with PSCSI sense data
  target: simplify code around transport_get_sense_data
  target: move transport_get_sense_data
  target: Check idr_get_new return value in iscsi_login_zero_tsih_s1
  target: Fix ->data_length re-assignment bug with SCSI overflow

Pull power management fixes from Rafael J. Wysocki:
 "Three ACPI device power management fixes related to checking and
  setting device power states."

* tag 'pm-for-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Use KERN_DEBUG when no power resources are found
  ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device
  ACPI / PM: Infer parent power state from child if unknown, v2

Pull a btrfs revert from Chris Mason:
 "My for-linus branch has one revert in the new quota code.

  We're building up more fixes at etc for the next merge window, but I'm
  keeping them out unless they are bigger regressions or have a huge
  impact."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"

Pull more sound fixes from Takashi Iwai:
 "Yet more (a bunch of) small fixes that slipped from the previous pull
  request.  Most of commits are pending ASoC fixes, all of which are
  fairly trivial commits."

* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8904: correct the index
  ALSA: hda - Yet another position_fix quirk for ASUS machines
  ASoC: tegra: fix maxburst settings in dmaengine code
  ASoC: samsung dma - Don't indicate support for pause/resume.
  ASoC: mc13783: Remove mono support
  ASoC: arizona: Fix typo in 44.1kHz rates
  ASoC: spear: correct the check for NULL dma_buffer pointer
  sound: tegra_alc5632: remove HP detect GPIO inversion
  ASoC: atmel-ssc: include linux/io.h for raw io
  ASoC: dapm: Don't force card bias level to be updated
  ASoC: dapm: Make sure we update the bias level for CODECs with no op
  ASoC: am3517evm: fix error return code
  ASoC: ux500_msp_i2s: better use devm functions and fix error return code
  ASoC: imx-sgtl5000: fix error return code

This reverts commit 970e1789.

Nikolay Ulyanitsky reported thatthe 3.6-rc5 kernel has a 15-20%
performance drop on PostgreSQL 9.2 on his machine (running "pgbench").

Borislav Petkov was able to reproduce this, and bisected it to this
commit 970e1789 ("sched: Improve scalability via 'CPU buddies' ...")
apparently because the new single-idle-buddy model simply doesn't find
idle CPU's to reschedule on aggressively enough.

Mike Galbraith suspects that it is likely due to the user-mode spinlocks
in PostgreSQL not reacting well to preemption, but we don't really know
the details - I'll just revert the commit for now.

There are hopefully other approaches to improve scheduler scalability
without it causing these kinds of downsides.
Reported-by: NNikolay Ulyanitsky <lystor@gmail.com>
Bisected-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NMike Galbraith <efault@gmx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch initialize register map of MUIC device because mfd driver
of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of
Maxim MAX77693 is initialized before call max77693-muic probe() function.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reported-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This patch fix bug related to interrupt handling for MAX77693 devices.
- Unmask interrupt masking bit for charger/flash/muic to revolve
that interrupt isn't happened when external connector is attached.
- Fix wrong regmap instance when muic interrupt is happened.

This patch were discussed and confirm discussion about this patch on below url:
http://lkml.org/lkml/2012/7/16/118Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and only if the device tree bindings use the pattern of registering IPs
in the device tree with compatible properties.  This will be actively
harmful for drivers which support non-DT platforms and use this pattern
for their DT bindings as it will mean that the core will silently change
remapping behaviour and it is also limiting for drivers which don't do
DT with this particular pattern.  There is also a potential fragility if
there are interrupts not associated with MFD cells and all the cells are
omitted from the device tree for some reason.

Instead change the code to take an IRQ domain as an optional argument,
allowing drivers to take the decision about the parent domain for their
interrupts.  The one current user of this feature is ab8500-core, it has
the domain lookup pushed out into the driver.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

ASoC: Updates for 3.6

A bigger set of updates than I'm entirely comfortable with - things
backed up a bit due to travel.  As ever the majority of these are small,
focused updates for specific drivers though there are a couple of core
changes.  There's been good exposure in -next.

The AT91 patch fixes a build break.

Pull GFS2 fixes from Steven Whitehouse:
 "Here are three GFS2 fixes for the current kernel tree.  These are all
  related to the block reservation code which was added at the merge
  window.  That code will be getting an update at the forthcoming merge
  window too.  In the mean time though there are a few smaller issues
  which should be fixed.

  The first patch resolves an issue with write sizes of greater than 32
  bits with the size hinting code.  The second ensures that the
  allocation data structure is initialised when using xattrs and the
  third takes into account allocations which may have been made by other
  nodes which affect a reservation on the local node."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Take account of blockages when using reserved blocks
  GFS2: Fix missing allocation data for set/remove xattr
  GFS2: Make write size hinting code common

Pull x86 platform driver updates from Matthew Garrett:
 "A few small updates for 3.6 - a trivial regression fix and a couple of
  conformance updates for the gmux driver, plus some tiny fixes for
  asus-wmi, eeepc-laptop and thinkpad_acpi."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  thinkpad_acpi: buffer overflow in fan_get_status()
  eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug()
  platform/x86: fix asus_laptop.wled_type description
  asus-laptop: HRWS/HWRS typo
  drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEO
  apple-gmux: Fix port address calculation in gmux_pio_write32()
  apple-gmux: Fix index read functions
  apple-gmux: Obtain version info from indexed gmux

Pull i2c embedded fixes from Wolfram Sang:
 "The last bunch of (typical) i2c-embedded driver fixes for 3.6.

  Also update the MAINTAINERS file to point to my tree since people keep
  asking where to find their patches."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: algo: pca: Fix mode selection for PCA9665
  MAINTAINERS: fix tree for current i2c-embedded development
  i2c: mxs: correctly setup speed for non devicetree
  i2c: pnx: Fix read transactions of >= 2 bytes
  i2c: pnx: Fix bit definitions

Merge tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fixes from Tyler Hicks:

 - Fixes a regression, introduced in 3.6-rc1, when a file is closed
   before its shared memory mapping is dirtied and unmapped.  The lower
   file was being released when the eCryptfs file was closed and the
   dirtied pages could not be written out.
 - Adds a call to the lower filesystem's ->flush() from
   ecryptfs_flush().
 - Fixes a regression, introduced in 2.6.39, when a file is renamed on
   top of another file.  The target file's inode was not being evicted
   and the space taken by the file was not reclaimed until eCryptfs was
   unmounted.

* tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: Copy up attributes of the lower target inode after rename
  eCryptfs: Call lower ->flush() from ecryptfs_flush()
  eCryptfs: Write out all dirty pages just before releasing the lower file

Pull one more DMA-mapping fix from Marek Szyprowski:
 "This patch fixes very subtle bug (typical off-by-one error) which
  might appear in very rare circumstances."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  arm: mm: fix DMA pool affiliation check

Pull hwmon fixes from Guenter Roeck:
 "Fix word size register read and write operations in ina2xx driver, and
  initialize uninitialized structure elements in twl4030-madc-hwmon
  driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ina2xx) Fix word size register read and write operations
  hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements

Pull drm fixes from Dave Airlie:
 "I realise this a bit bigger than I would want at this point.

  Exynos is a large chunk, I got them to half what they wanted already,
  and hey its ARM based, so not going to hurt many people.

  Radeon has only two fixes, but the PLL fixes were a bit bigger, but
  required for a lot of scenarios, the fence fix is really urgent.

  vmwgfx: I've pulled in a dumb ioctl support patch that I was going to
  shove in later and cc stable, but we need it asap, its mainly to stop
  mesa growing a really ugly dependency in userspace to run stuff on
  vmware, and if I don't stick it in the kernel now, everyone will have
  to ship ugly userspace libs to workaround it.

  nouveau: single urgent fix found in F18 testing, causes X to not start
  properly when f18 plymouth is used

  i915: smattering of fixes and debug quieting

  gma500: single regression fix

  So as I said a bit large, but its fairly well scattered and its all
  stuff I'll be shipping in F18's 3.6 kernel."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits)
  drm/nouveau: fix booting with plymouth + dumb support
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file
  vmwgfx: add dumb ioctl support
  gma500: Fix regression on Oaktrail devices
  ...

Pull scheduler fixes from Ingo Molnar:
 "Smaller fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix kernel-doc warnings in kernel/sched/fair.c
  sched: Unthrottle rt runqueues in __disable_runtime()
  sched: Add missing call to calc_load_exit_idle()
  sched: Fix load avg vs cpu-hotplug

Pull perf fixes from Ingo Molnar:
 "This tree includes various fixes"

Ingo really needs to improve on the whole "explain git pull" part.
"Various fixes" indeed.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hwpb: Invoke __perf_event_disable() if interrupts are already disabled
  perf/x86: Enable Intel Cedarview Atom suppport
  perf_event: Switch to internal refcount, fix race with close()
  oprofile, s390: Fix uninitialized memory access when writing to oprofilefs
  perf/x86: Fix microcode revision check for SNB-PEBS

Pull a core sparse warning fix from Ingo Molnar

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm/memblock: Use NULL instead of 0 for pointers

This reverts commit 5986802c.

Both paths are not error paths but regular cases where non-qgroup
subvols are involved.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Pull networking fixes from David Miller:

 1) Use after free and new device IDs in bluetooth from Andre Guedes,
    Yevgeniy Melnichuk, Gustavo Padovan, and Henrik Rydberg.

 2) Fix crashes with short packet lengths and VLAN in pktgen, from
    Nishank Trivedi.

 3) mISDN calls flush_work_sync() with locks held, fix from Karsten
    Keil.

 4) Packet scheduler gred parameters are reported to userspace
    improperly scaled, and WRED idling is not performed correctly.  All
    from David Ward.

 5) Fix TCP socket refcount problem in ipv6, from Julian Anastasov.

 6) ibmveth device has RX queue alignment requirements which are not
    being explicitly met resulting in sporadic failures, fix from
    Santiago Leon.

 7) Netfilter needs to take care when interpreting sockets attached to
    socket buffers, they could be time-wait minisockets.  Fix from Eric
    Dumazet.

 8) sock_edemux() has the same issue as netfilter did in #7 above, fix
    from Eric Dumazet.

 9) Avoid infinite loops in CBQ scheduler with some configurations, from
    Eric Dumazet.

10) Deal with "Reflection scan: an Off-Path Attack on TCP", from Jozsef
    Kadlecsik.

11) SCTP overcharges socket for TX packets, fix from Thomas Graf.

12) CODEL packet scheduler should not reset it's state every time it
    builds a new flow, fix from Eric Dumazet.

13) Fix memory leak in nl80211, from Wei Yongjun.

14) NETROM doesn't check skb_copy_datagram_iovec() return values, from
    Alan Cox.

15) l2tp ethernet was using sizeof(ETH_HLEN) instead of plain ETH_HLEN,
    oops.  From Eric Dumazet.

16) Fix selection of ath9k chips on which PA linearization and AM2PM
    predistoration are used, from Felix Fietkau.

17) Flow steering settings in mlx4 driver need to be validated properly,
    from Hadar Hen Zion.

18) bnx2x doesn't show the correct link duplex setting, from Yaniv
    Rosner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  pktgen: fix crash with vlan and packet size less than 46
  bnx2x: Add missing afex code
  bnx2x: fix registers dumped
  bnx2x: correct advertisement of pause capabilities
  bnx2x: display the correct duplex value
  bnx2x: prevent timeouts when using PFC
  bnx2x: fix stats copying logic
  bnx2x: Avoid sending multiple statistics queries
  net: qmi_wwan: call subdriver with control intf only
  net_sched: gred: actually perform idling in WRED mode
  net_sched: gred: fix qave reporting via netlink
  net_sched: gred: eliminate redundant DP prio comparisons
  net_sched: gred: correct comment about qavg calculation in RIO mode
  mISDN: Fix wrong usage of flush_work_sync while holding locks
  netfilter: log: Fix log-level processing
  net-sched: sch_cbq: avoid infinite loop
  net: qmi_wwan: fix Gobi device probing for un2430
  net: fix net/core/sock.c build error
  ixp4xx_hss: fix build failure due to missing linux/module.h inclusion
  caif: move the dereference below the NULL test
  ...

Pull USB patches from Greg Kroah-Hartman:
 "Here are a number of USB patches, a bit more than I normally like this
  late in the -rc series, but given people's vacations (myself
  included), and the kernel summit, it seems to have happened this way.

  All are tiny, but they add up.  A number of gadget and xhci fixes, and
  a few new device ids.  All have been tested in linux-next.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low
  usb: chipidea: cleanup dma_pool if udc_start() fails
  usb: chipidea: udc: fix error path in udc_start()
  usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  usb: chipidea: udc: fix setup of endpoint maxpacket size
  USB: option: replace ZTE K5006-Z entry with vendor class rule
  EHCI: Update qTD next pointer in QH overlay region during unlink
  USB: cdc-wdm: fix wdm_find_device* return value
  USB: ftdi_sio: do not claim CDC ACM function
  usb: dwc3: gadget: fix pending isoc handling
  usb: renesas_usbhs: fixup DMA transport data alignment
  usb: gadget: at91udc: Don't check for ep->ep.desc
  usb: gadget: at91udc: don't overwrite driver data
  usb: dwc3: core: fix incorrect usage of resource pointer
  usb: musb: musbhsdma: fix IRQ check
  usb: musb: tusb6010: fix error path in tusb_probe()
  usb: musb: host: fix for musb_start_urb Oops
  usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh
  usb: gadget: dummy_hcd: fixup error probe path
  usb: gadget: s3c-hsotg.c: fix error return code
  ...

Pull TTY fixes from Greg Kroah-Hartman:
 "Here are 2 tiny patches for a serial driver to resolve issues that
  people have reported with the 3.6-rc tree.

  Both of these have been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: imx: don't reinit clock in imx_setup_ufcr()
  tty: serial: imx: console write routing is unsafe on SMP

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are a few staging tree fixes for problems that have been
  reported.

  Nothing major, just a number of tiny driver fixes.  All of these have
  been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  drm/omap: add more new timings fields
  drm/omap: update for interlaced
  staging: r8712u: fix bug in r8712_recv_indicatepkt()
  staging: zcache: fix cleancache race condition with shrinker
  Staging: Android alarm: IOCTL command encoding fix
  staging: vt6656: [BUG] - Failed connection, incorrect endian.
  staging: ozwpan: fix memcmp() test in oz_set_active_pd()
  staging: wlan-ng: Fix problem with wrong arguments
  staging: comedi: das08: Correct AO output for das08jr-16-ao
  staging: comedi: das08: Correct AI encoding for das08jr-16-ao
  staging: comedi: das08: Fix PCI ref count
  staging: comedi: amplc_pci230: Fix PCI ref count
  staging: comedi: amplc_pc263: Fix PCI ref count
  staging: comedi: amplc_pc236: Fix PCI ref count
  staging: comedi: amplc_dio200: Fix PCI ref count
  staging: comedi: amplc_pci224: Fix PCI ref count
  drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR
  staging iio: fix potential memory leak in lis3l02dq_ring.c
  staging:iio: prevent divide by zero bugs

Pull driver core fix from Greg Kroah-Hartman:
 "Here is one fix for 3.6-rc6 for the kobject.h file.

  It fixes a reported oops if CONFIG_HOTPLUG is disabled.  It's been in
  the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"

We already use them for openat() and friends, but fstat() also wants to
be able to use O_PATH file descriptors.  This should make it more
directly comparable to the O_SEARCH of Solaris.

Note that you could already do the same thing with "fstatat()" and an
empty path, but just doing "fstat()" directly is simpler and faster, so
there is no reason not to just allow it directly.

See also commit 332a2e12, which did the same thing for fchdir, for
the same reasons.
Reported-by: Nольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org    # O_PATH introduced in 3.0+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit a606dac3 adds support to link
devices which have _PRx, if a device does not have _PRx, a warning
message will be printed.

This commit is for ZPODD on Intel ZPODD capable platforms, on other
platforms, it has no problem if there is no power resource for this
device, so a warning here is not appropriate, change it to debug.
Reported-by: NBorislav Petkov <bp@amd64.org>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

After calling into the lower filesystem to do a rename, the lower target
inode's attributes were not copied up to the eCryptfs target inode. This
resulted in the eCryptfs target inode staying around, rather than being
evicted, because i_nlink was not updated for the eCryptfs inode. This
also meant that eCryptfs didn't do the final iput() on the lower target
inode so it stayed around, as well. This would result in a failure to
free up space occupied by the target file in the rename() operation.
Both target inodes would eventually be evicted when the eCryptfs
filesystem was unmounted.

This patch calls fsstack_copy_attr_all() after the lower filesystem
does its ->rename() so that important inode attributes, such as i_nlink,
are updated at the eCryptfs layer. ecryptfs_evict_inode() is now called
and eCryptfs can drop its final reference on the lower inode.

http://launchpad.net/bugs/561129Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
Tested-by: NColin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org> [2.6.39+]

Since eCryptfs only calls fput() on the lower file in
ecryptfs_release(), eCryptfs should call the lower filesystem's
->flush() from ecryptfs_flush().

If the lower filesystem implements ->flush(), then eCryptfs should try
to flush out any dirty pages prior to calling the lower ->flush(). If
the lower filesystem does not implement ->flush(), then eCryptfs has no
need to do anything in ecryptfs_flush() since dirty pages are now
written out to the lower filesystem in ecryptfs_release().
Signed-off-by: NTyler Hicks <tyhicks@canonical.com>

Fixes a regression caused by:

821f7494 eCryptfs: Revert to a writethrough cache model

That patch reverted some code (specifically, 32001d6f) that was
necessary to properly handle open() -> mmap() -> close() -> dirty pages
-> munmap(), because the lower file could be closed before the dirty
pages are written out.

Rather than reapplying 32001d6f, this approach is a better way of
ensuring that the lower file is still open in order to handle writing
out the dirty pages. It is called from ecryptfs_release(), while we have
a lock on the lower file pointer, just before the lower file gets the
final fput() and we overwrite the pointer.

https://launchpad.net/bugs/1047261Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
Reported-by: NArtemy Tregubenko <me@arty.name>
Tested-by: NArtemy Tregubenko <me@arty.name>
Tested-by: NColin Ian King <colin.king@canonical.com>

The code currently always selects turbo mode for PCA9665, no matter which
clock frequency is configured. This is because it compares the clock frequency
against constants reflecting (boundary / 100). Compare against real boundary
frequencies to fix the problem.
Signed-off-by: NThomas Kavanagh <tkavanagh@juniper.net>
Signed-off-by: NGuenter Roeck <groeck@juniper.net>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

Guide people to where their patches can be found these days.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NBen Dooks <ben-linux@fluff.org>

We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.

Cc: stable@vger.kernel.org
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Alex writes:

This is the current set of radeon fixes for 3.6.  Two small fixes:
- fix the fence issues introduced in 3.5 with 64-bit fences
- PLL fix for multiple DP heads

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)

Commit 0090def6("ACPI: Add interface to register/unregister device
to/from power resources") used resource_lock to protect the devices list
that relies on power resource. It caused a mutex dead lock, as below

    acpi_power_on ---> lock resource_lock
      __acpi_power_on
        acpi_power_on_device
          acpi_power_get_inferred_state
            acpi_power_get_list_state ---> lock resource_lock

This patch adds a new mutex "devices_lock" to protect the devices list
and calls acpi_power_on_device in acpi_power_on, instead of
__acpi_power_on, after the resource_lock is released.

[rjw: Changed data type of a boolean variable to bool.]
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>