The watchdog infrastructure in Dove is no different from that in
Orion5x or Kirkwood, so let's enable it for Dove.  The only things
missing are a few register settings in Dove's bridge-regs.h.

Rather than duplicating the same register bit masks for the RSTOUTn_MASK
and BRIDGE_CAUSE registers, move the definitions into the watchdog
driver itself.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This adds a driver for watchdog timer hardware present on Broadcom BCM2835 SoC,
used in Raspberry Pi and Roku 2 devices.
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org

Interrupt request doesn't use the right API: The TWD watchdog uses a per-cpu
interrupt (usually interrupt #30), and the GIC configuration should flag it as
such. With this setup, request_irq() should fail, and the right API is
request_percpu_irq(), together with enable_percpu_irq()/disable_percpu_irq().

Nothing ensures the userspace ioctl() will end-up kicking the watchdog on the
right CPU.

There are no users of this driver since a long time and it makes more sense to
get rid of it as nobody is looking to fix it.

In case somebody wakes up after this has been removed and needs it, please
revert this driver and pick these updates (These were never pushed to mainline):

http://comments.gmane.org/gmane.linux.ports.arm.kernel/245998Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Watchdog 1.01.a is also compatible with 1.00.a.
Add the origin version to compatible list.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

- Remove reference for IP version
- Fix header coding style
- Remove notes which are visible from the code
- Fix driver license according to header
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Kernel has nice helpers to dump buffers.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

A watchdog device may be stopped from userspace using WDIOC_SETOPTIONS
ioctl and flag WDIOS_DISABLECARD. If the device is closed after this
operation, watchdog_release() is called and status bits checked for
stopping it. Besides, if the device has not been unregistered a critical
message "watchdog did not stop!" is printed, although the ioctl may have
successfully stopped it already.

Without the patch a user application sample code like this will successfully
stop the watchdog, but the kernel will output the message
"watchdog did not stop!":

	wd_fd = open("/dev/watchdog", O_RDWR);

	flags = WDIOS_DISABLECARD;
	ioctl(wd_fd, WDIOC_SETOPTIONS, &flags);

	close(wd_fd);
Signed-off-by: NHector Palacios <hector.palacios@digi.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

In preparation to switching the jz4740 clk driver to the common clk framework
make sure to pass the device to clk_get().
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Instead of using legacy suspend/resume methods, using newer
dev_pm_ops structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

dev_err()/dev_info() are more preferred than pr_err()/pr_info().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_gpio_request_one() to make cleanup paths simpler.
Also, GPIOF_DIR_OUT | GPIOF_INIT_LOW is replaced with
GPIOF_OUT_INIT_LOW.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_gpio_request_one() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

'dw_wdt_write' is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_ioremap_nocache() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_ioremap() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_ioremap_nocache() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This reverts commit d2aae847.

It is completely and utterly broken.  Module install should not build
any files, and adding broken dependencies to "help" it build files is
complete and utter sh*t.

The kernel should not be built by root, and "make install" and "make
module_install" (that for obvious reasons need to be run as root)
absolutely must not build any files.  They should only ever copy the
already-built files over.

So having dependencies for the install targets is wrong, wrong, wrong.

If you try to install a kernel without building it first, you *should*
get errors. The build system shouldn't try to help root build the files.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more KVM changes from Gleb Natapov:
 "A fix for a bug that prevents some guests from working on old Intel
  CPUs and a patch that integrates ARM64 KVM, merged via ARM64 tree,
  into Kconfig."

* tag 'kvm-3.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: mark unusable segment as nonpresent
  arm64: KVM: Kconfig integration

Pull Sparc bugfixes from David Miller:
 "Four bug fixes:

   1) Enable snoop tags properly on Sparc32/LEON, from Andreas Larsson

   2) strcpy() length check fix from Chen Gang.

   3) Forgotten unregister_netdev() in sunvnet driver, from Dave
      Kleikamp.

   4) Fix broken assembler offsets used in vm_area_struct accesses on
      sparc32, from Olivier DANET."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  [PATCH] sparc32: vm_area_struct access for old Sun SPARCs.
  sunvnet: vnet_port_remove must call unregister_netdev
  sparc32, leon: Require separate snoop tags set to regard snooping to be enabled
  arch: sparc: kernel: check the memory length before use strcpy().

Pull IDE updates from David Miller:
 "Just a few small things:

   1) module_platform_driver_probe() conversions from Jingoo Han.

   2) module_pci_driver() conversion from Libo Chen.

   3) PIO size calculation fix from Steven J Hill"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: Fix IDE PIO size calculation
  drivers/ide/delkin_cb: Convert to module_pci_driver
  ide: gayle: use module_platform_driver_probe()
  ide: tx4939ide: use module_platform_driver_probe()
  ide: tx4938ide: use module_platform_driver_probe()

Pull printk locking fix from Thomas Gleixner:
 "A single lock ordering fix in the printk code"

* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  printk: Fix rq->lock vs logbuf_lock unlock lock inversion

Merge more patches from Andrew Morton:
 "The rest of MM"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: remove free_area_cache
  zswap: add documentation
  zswap: add to mm/
  zbud: add to mm/