- 02 5月, 2017 2 次提交
-
-
由 David S. Miller 提交于
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-04-30 Here's one last batch of Bluetooth patches in the bluetooth-next tree targeting the 4.12 kernel. - Remove custom ECDH implementation and use new KPP API instead - Add protocol checks to hci_ldisc - Add module license to HCI UART Nokia H4+ driver - Minor fix for 32bit user space - 64 bit kernel combination Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Liam Beguin 提交于
Figure 1 is full of whitespaces; fix it Signed-off-by: NLiam Beguin <lbeguin@tycoint.com> Signed-off-by: NSylvain Lemieux <slemieux@tycoint.com> Acked-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2017 38 次提交
-
-
由 Ido Schimmel 提交于
When a netdev is enslaved to a VRF master, its router interface (RIF) needs to be destroyed (if exists) and a new one created using the corresponding virtual router (VR). >From the driver's perspective, the above is equivalent to an inetaddr event sent for this netdev. Therefore, when a port netdev (or its uppers) are enslaved to a VRF master, call the same function that would've been called had a NETDEV_UP was sent for this netdev in the inetaddr notification chain. This patch also fixes a bug when a LAG netdev with an existing RIF is enslaved to a VRF. Before this patch, each LAG port would drop the reference on the RIF, but would re-join the same one (in the wrong VR) soon after. With this patch, the corresponding RIF is first destroyed and a new one is created using the correct VR. Fixes: 7179eb5a ("mlxsw: spectrum_router: Add support for VRFs") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
mlx5-updates-2017-04-30 Or says: ================ mlx5 neigh update This series (whose code name is 'neigh update') from Hadar, enhances the mlx5 TC IP tunnel offloads to deal with changes to tunnel destination neighbours used in offloaded flows which involved encapsulation. In order to keep track on the validity state of such neighbours, we register a netevent notifier callback and act on NEIGH_UPDATE events: if a neighbour becomes valid, offload the related flows to HW (the other way around when neigh becomes invalid) and similarly when a neigh mac addresses changes. Since this traffic is offloaded from the host OS, the neighbour for the IP tunnel destination can mistakenly become STALE and deleted by the kernel since its 'used' value wasn't changed. To address that, we proactively update the neighbour 'used' value every DELAY_PROBE_TIME seconds, using time stamps generated by the existing driver code for HW flow counters. We use the DELAY_PROBE_TIME_UPDATE event to adjust the frequency of the updates. Prior to the core of the series, there's a patch from Saeed that introduces an extendable vport representor implementation scheme. It provides a separation between the eswitch to the netdev related aspects of the representors. We would like to thank Ido Schimmel and Ilya Lesokhin for their coaching && advice through the long design and review cycles while we struggled to understand and (hopefully correctly) implement the locking around the different driver flows(..) . - Or. ================= Misc Updates: From Tariq: Some small performance and trivial code optimization for mlx5 netdev driver - Optimize poll ICOSQ completion queue - Use prefetchw when a write is to follow - Use u8 as ownership type in mlx5e_get_cqe() From Eran: - Disable LRO by default on specific setups From Eli: - Small cleanup for E-Switch to avoid redundant allocation Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mintz, Yuval 提交于
After removing the PTP related initialization from slowpath start, the remaining PTT entry is required only in case CONFIG_RFS_ACCEL is set. Otherwise, it leads to a warning due to it being unused. Fixes: d179bd16 ("qed: Acquire/release ptt_ptp lock when enabling/disabling PTP") Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== qed: RoCE related pseudo-fixes This series contains multiple small corrections to the RoCE logic in qed plus some debug information and inter-module parameter meant to prevent issues further along. - #1, #6 Share information with protocol driver [either new or filling missing bits in existing API]. - #2, #3 correct error flows in qed. - #4 add debug related information. - #5 fixes a minor issue in the HW configuration. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
Output to the RDMA driver whether DPM mode is enabled or disabled in the HW and if so what is the number of WIDs it supports Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
When calculating doorbell BAR partitioning round up the number of CPUs to the nearest power of 2 so the size of the DPI (per user section) configured in the hardware will be stored properly and not truncated. Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
Add mechanism to verify RoCE resources are released prior to freeing the bitmaps. If this is not the case, print what resources were not released. Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
If the posting of the ramrod for the purpose of TID deregistration fails, abort the deregistration operation without using the FW's return code. Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
The internal RoCE SQE QP state isn't being used. Instead we mark the QP as in regular error state. Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yonghong Song 提交于
llvm 4.0 and above generates the code like below: .... 440: (b7) r1 = 15 441: (05) goto pc+73 515: (79) r6 = *(u64 *)(r10 -152) 516: (bf) r7 = r10 517: (07) r7 += -112 518: (bf) r2 = r7 519: (0f) r2 += r1 520: (71) r1 = *(u8 *)(r8 +0) 521: (73) *(u8 *)(r2 +45) = r1 .... and the verifier complains "R2 invalid mem access 'inv'" for insn #521. This is because verifier marks register r2 as unknown value after #519 where r2 is a stack pointer and r1 holds a constant value. Teach verifier to recognize "stack_ptr + imm" and "stack_ptr + reg with const val" as valid stack_ptr with new offset. Signed-off-by: NYonghong Song <yhs@fb.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karim Eshapa 提交于
Use time_before_eq for time comparison more safe and dealing with timer wrapping to be future-proof. Signed-off-by: NKarim Eshapa <karim.eshapa@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin LaHaise 提交于
Since several of the the netlink attributes used to configure the flower classifier's MPLS TC, BOS and Label fields have additional bits which are unused, check those bits to ensure that they are actually 0 as suggested by Jamal. Signed-off-by: NBenjamin LaHaise <benjamin.lahaise@netronome.com> Cc: David Miller <davem@davemloft.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Simon Horman <simon.horman@netronome.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for your net-next tree. A large bunch of code cleanups, simplify the conntrack extension codebase, get rid of the fake conntrack object, speed up netns by selective synchronize_net() calls. More specifically, they are: 1) Check for ct->status bit instead of using nfct_nat() from IPVS and Netfilter codebase, patch from Florian Westphal. 2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao. 3) Simplify FTP IPVS helper module registration path, from Arushi Singhal. 4) Introduce nft_is_base_chain() helper function. 5) Enforce expectation limit from userspace conntrack helper, from Gao Feng. 6) Add nf_ct_remove_expect() helper function, from Gao Feng. 7) NAT mangle helper function return boolean, from Gao Feng. 8) ctnetlink_alloc_expect() should only work for conntrack with helpers, from Gao Feng. 9) Add nfnl_msg_type() helper function to nfnetlink to build the netlink message type. 10) Get rid of unnecessary cast on void, from simran singhal. 11) Use seq_puts()/seq_putc() instead of seq_printf() where possible, also from simran singhal. 12) Use list_prev_entry() from nf_tables, from simran signhal. 13) Remove unnecessary & on pointer function in the Netfilter and IPVS code. 14) Remove obsolete comment on set of rules per CPU in ip6_tables, no longer true. From Arushi Singhal. 15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng. 16) Remove unnecessary nested rcu_read_lock() in __nf_nat_decode_session(). Code running from hooks are already guaranteed to run under RCU read side. 17) Remove deadcode in nf_tables_getobj(), from Aaron Conole. 18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(), also from Aaron. 19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole. 20) Don't propagate NF_DROP error to userspace via ctnetlink in __nf_nat_alloc_null_binding() function, from Gao Feng. 21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks, from Gao Feng. 22) Kill the fake untracked conntrack objects, use ctinfo instead to annotate a conntrack object is untracked, from Florian Westphal. 23) Remove nf_ct_is_untracked(), now obsolete since we have no conntrack template anymore, from Florian. 24) Add event mask support to nft_ct, also from Florian. 25) Move nf_conn_help structure to include/net/netfilter/nf_conntrack_helper.h. 26) Add a fixed 32 bytes scratchpad area for conntrack helpers. Thus, we don't deal with variable conntrack extensions anymore. Make sure userspace conntrack helper doesn't go over that size. Remove variable size ct extension infrastructure now this code got no more clients. From Florian Westphal. 27) Restore offset and length of nf_ct_ext structure to 8 bytes now that wraparound is not possible any longer, also from Florian. 28) Allow to get rid of unassured flows under stress in conntrack, this applies to DCCP, SCTP and TCP protocols, from Florian. 29) Shrink size of nf_conntrack_ecache structure, from Florian. 30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker, from Gao Feng. 31) Register SYNPROXY hooks on demand, from Florian Westphal. 32) Use pernet hook whenever possible, instead of global hook registration, from Florian Westphal. 33) Pass hook structure to ebt_register_table() to consolidate some infrastructure code, from Florian Westphal. 34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the SYNPROXY code, to make sure device stats are not fooled, patch from Gao Feng. 35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we don't need anymore if we just select a fixed size instead of expensive runtime time calculation of this. From Florian. 36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(), from Florian. 37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from Florian. 38) Attach NAT extension on-demand from masquerade and pptp helper path, from Florian. 39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole. 40) Speed up netns by selective calls of synchronize_net(), from Florian Westphal. 41) Silence stack size warning gcc in 32-bit arch in snmp helper, from Florian. 42) Inconditionally call nf_ct_ext_destroy(), even if we have no extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from Liping Zhang. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jesper Dangaard Brouer says: ==================== samples/bpf: two bug fixes to XDP_FLAGS_SKB_MODE attaching Two small bugfixes for: commit 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
The xdp_tx_iptunnel program can be terminated in two ways, after N-seconds or via Ctrl-C SIGINT. The SIGINT code path does not handle detatching the correct XDP program, in-case the program was attached with XDP_FLAGS_SKB_MODE. Fix this by storing the XDP flags as a global variable, which is available for the SIGINT handler function. Fixes: 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Reviewed-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
The kernel side of XDP_FLAGS_SKB_MODE is unsigned, and the rtnetlink IFLA_XDP_FLAGS is defined as NLA_U32. Thus, userspace programs under samples/bpf/ should use the correct type. Fixes: 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Reviewed-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== xdp: use netlink extended ACK reporting This series is an attempt to make XDP more user friendly by enabling exploiting the recently added netlink extended ACK reporting to carry messages to user space. David Ahern's iproute2 ext ack patches for ip link are sufficient to show the errors like this: Error: nfp: MTU too large w/ XDP enabled Where the message is coming directly from the driver. There could still be a bit of a leap for a complete novice from the message above to the right settings, but it's a big improvement over the standard "Invalid argument" message. v1/non-rfc: - add a separate macro in patch 1; - add KBUILD_MODNAME as part of the message (Daniel); - don't print the error to logs in patch 1. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Try to carry error messages to the user via the netlink extended ack message attribute. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Try to carry error messages to the user via the netlink extended ack message attribute. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Drivers usually have a number of restrictions for running XDP - most common being buffer sizes, LRO and number of rings. Even though some drivers try to be helpful and print error messages experience shows that users don't often consult kernel logs on netlink errors. Try to use the new extended ack mechanism to carry the message back to user space. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
As we propagate extended ack reporting throughout various paths in the kernel it may be that the same function is called with the extended ack parameter passed as NULL. One place where that happens is in drivers which have a centralized reconfiguration function called both from ndos and from ethtool_ops. Add a new helper for setting the error message in such conditions. Existing helper is left as is to encourage propagating the ext act fully wherever possible. It also makes it clear in the code which messages may be lost due to ext ack being NULL. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Liping Zhang 提交于
For NF_NAT_MANIP_SRC, we will insert the ct to the nat_bysource_table, then remove it from the nat_bysource_table via nat_extend->destroy. But now, the nat extension is attached on demand, so if the nat extension is not attached, we will not be notified when the ct is destroyed, i.e. we may fail to remove ct from the nat_bysource_table. So just keep it simple, even if the extension is not attached, we will still invoke the related ext->destroy. And this will also preserve the flexibility for the future extension. Fixes: 9a08ecfe ("netfilter: don't attach a nat extension by default") Signed-off-by: NLiping Zhang <zlpnobody@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
http://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next由 Pablo Neira Ayuso 提交于
Simon Horman says: ==================== Third Round of IPVS Updates for v4.12 please consider these enhancements to IPVS for v4.12. If it is too late for v4.12 then please consider them for v4.13. * Remove unused function * Correct comparison of unsigned value ==================== Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
net/ipv4/netfilter/nf_nat_snmp_basic.c:1158:1: warning: the frame size of 1160 bytes is larger than 1024 bytes Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
nf_unregister_net_hook(s) can avoid a second call to synchronize_net, provided there is no nfqueue active in that net namespace (which is the common case). This also gets rid of the extra arg to nf_queue_nf_hook_drop(), normally this gets called during netns cleanup so no packets should be queued. For the rare case of base chain being unregistered or module removal while nfqueue is in use the extra hiccup due to the packet drops isn't a big deal. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
nf_log_unregister() (which is what gets called in the logger backends module exit paths) does a (required, module is removed) synchronize_rcu(). But nf_log_unset() is only called from pernet exit handlers. It doesn't free any memory so there appears to be no need to call synchronize_rcu. v2: Liping Zhang points out that nf_log_unregister() needs to be called after pernet unregister, else rmmod would become unsafe. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
synchronize_net is expensive and slows down netns cleanup a lot. We have two APIs to unregister a hook: nf_unregister_net_hook (which calls synchronize_net()) and nf_unregister_net_hooks (calls nf_unregister_net_hook in a loop) Make nf_unregister_net_hook a wapper around new helper __nf_unregister_net_hook, which unlinks the hook but does not free it. Then, we can call that helper in nf_unregister_net_hooks and then call synchronize_net() only once. Andrey Konovalov reports this change improves syzkaller fuzzing speed at least twice. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Abhishek Shah 提交于
This patch allows users to enable/disable internal TX and/or RX clock delay for BCM5481x series PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. Signed-off-by: NAbhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
trivial fix to spelling mistakes in printk message. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Scott Wood 提交于
The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761daf #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761daf) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arkadi Sharshevsky 提交于
Commit 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb entries") added the ability to "take over an entry which was previously learned via HW when it shows up from a SW port". However, if an entry was learned via HW and then a control packet (e.g., ARP request) was trapped to the CPU, the bridge driver will update the entry and remove the externally learned flag, although the entry is still present in HW. Instead, only clear the externally learned flag in case of roaming. Fixes: 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb entries") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NArkadi Sharashevsky <arkadis@mellanox.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
After commit 1215e51e ("ipv4: fix a deadlock in ip_ra_control") we always take RTNL lock for ip_ra_control() which is the only place we update the list ip_ra_chain, so the ip_ra_lock is no longer needed. As Eric points out, BH does not need to disable either, RCU readers don't care. Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
The struct bpf_map_def was extended in commit fb30d4b7 ("bpf: Add tests for map-in-map") with member unsigned int inner_map_idx. This changed the size of the maps section in the generated ELF _kern.o files. Unfortunately the loader in bpf_load.c does not detect or handle this. Thus, older _kern.o files became incompatible, and caused hard-to-debug errors where the syscall validation rejected BPF_MAP_CREATE request. This patch only detect the situation and aborts load_bpf_file(). It also add code comments warning people that read this loader for inspiration for these pitfalls. Fixes: fb30d4b7 ("bpf: Add tests for map-in-map") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We recently added a check to see if nla_nest_start() fails. There are two issues with that. First, if it fails then I don't think we should call nla_nest_cancel(). Second, it's slightly convoluted but the current code returns success but we should return -EMSGSIZE instead. Fixes: a50fe0ff ("lwtunnel: check return value of nla_nest_start") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
Presumably we never hit this return, but static checkers complain that we need to unlock so we may as well fix that. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
My static checker complains that we're holding a mutex on this error path. Let's goto exit instead of returning directly. Fixes: b0bccb69 ("qed: Change locking scheme for VF channel") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
lipeng says: ==================== net: hns: bug fix for HNS driver This patchset add support defered dsaf probe when mdio and mbigen module is not insmod. For more details, please refer to individual patch. change log: V4 - > V5: 1. Float on net-next; 2. Delete patch "net: hns: fixed bug that skb used after kfree" from this patchset; V3 -> V4: 1. Delete redundant commit message; 2. Add Reviewed-by: Matthias Brugger <mbrugger@suse.com>; V2 -> V3: 1. Check return value when platform_get_irq in hns_rcb_get_cfg; V1 -> V2: 1. Return appropriate errno in hns_mac_register_phy; ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-