- 03 3月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Update nf_ct_helper_log to emit args along with the format. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 27 2月, 2013 17 次提交
-
-
由 Marina Makienko 提交于
Add missing usb_free_urb() on failure path in st5481_setup_usb(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NMarina Makienko <makienko@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
in bond_enslave(), check slave_cnt before actually using slave address. introduced by: commit 409cc1f8 (bond: have random dev address by default instead of zeroes) Reported-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Mack 提交于
Make cpsw_add_default_vlan() look at the actual number of slaves for its iteration, so boards with less than 2 slaves don't ooops at boot. Signed-off-by: NDaniel Mack <zonque@gmail.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://1984.lsi.us.es/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== The following patchset contains two bugfixes for netfilter/ipset via Jozsef Kadlecsik, they are: * Fix timeout corruption if sets are resized, by Josh Hunt. * Fix bogus error report if the flag nomatch is set, from Jozsef. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc由 David S. Miller 提交于
Ben Hutchings says: ==================== Some fixes that should go into 3.9: 1. Fix packet corruption when using non-coherent RX DMA buffers. 2. Fix occasional watchdog misfiring when changing MTU or ring size. These are longstanding bugs and should be fixed in stable as well, but I'd like to review other recent fixes first and send a separate request for stable inclusion. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li Wei. 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet. 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from Alexander Duyck. 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix from Eric Dumazet. 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the amount of TCP option space was not taken into account properly in this code path. Fix from yuchung Cheng. 6) MLX4 driver allocates device queues with the wrong size, from Kleber Sacilotto. 7) sock_diag can access past the end of the sock_diag_handlers[] array, from Mathias Krause. 8) vlan_set_encap_proto() makes incorrect assumptions about where skb->data points, rework the logic so that it works regardless of where skb->data happens to be. From Jesse Gross. 9) Fix gianfar build failure with NET_POLL enabled, from Paul Gortmaker. 10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from Pravin B Shelar. 11) bgmac driver does: int i; for (i = 0; ...; ...) { ... for (i = 0; ...; ...) { effectively corrupting the outer loop index, use a seperate variable for the inner loops. From Rafał Miłecki. 12) Fix suspend bugs in smsc95xx driver, from Ming Lei. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND usbnet: smsc95xx: fix broken runtime suspend usbnet: smsc95xx: fix suspend failure bgmac: fix indexing of 2nd level loops b43: Fix lockdep splat on module unload Revert "ip_gre: propogate target device GSO capability to the tunnel device" IP_GRE: Fix GRE_CSUM case. VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification. IP_GRE: Fix IP-Identification. net/pasemi: Fix missing coding style vmxnet3: fix ethtool ring buffer size setting vmxnet3: make local function static bnx2x: remove dead code and make local funcs static gianfar: fix compile fail for NET_POLL=y due to struct packing vlan: adjust vlan_set_encap_proto() for its callers sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg sock_diag: Fix out-of-bounds access to sock_diag_handlers[] vxlan: remove depends on CONFIG_EXPERIMENTAL mlx4_en: fix allocation of CPU affinity reverse-map mlx4_en: fix allocation of device tx_cq ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull scsi target updates from Nicholas Bellinger: "The highlights in this series include: - Improve sg_table lookup scalability in RAMDISK_MCP (martin) - Add device attribute to expose config name for INQUIRY model (tregaron) - Convert tcm_vhost to use lock-less list for cmd completion (asias) - Add tcm_vhost support for multiple target's per endpoint (asias) - Add tcm_vhost support for multiple queues per vhost (asias) - Add missing mapped_lun bounds checking during make_mappedlun setup in generic fabric configfs code (jan engelhardt + nab) - Enforce individual iscsi-target network portal export once per TargetName endpoint (grover + nab) - Add WRITE_SAME w/ UNMAP=0 emulation to FILEIO backend (nab) Things have been mostly quiet this round, with majority of the work being done on the iser-target WIP driver + associated iscsi-target refactoring patches currently in flight for v3.10 code. At this point there is one patch series left outstanding from Asias to add support for UNMAP + WRITE_SAME w/ UNMAP=1 to FILEIO awaiting feedback from hch & Co, that will likely be included in a post v3.9-rc1 PULL request if there are no objections. Also, there is a regression bug recently reported off-list that seems to be effecting v3.5 and v3.6 kernels with MSFT iSCSI initiators that is still being tracked down. No word if this effects >= v3.7 just yet, but if so there will likely another PULL request coming your way.." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors target/file: Add WRITE_SAME w/ UNMAP=0 emulation support iscsi-target: Enforce individual network portal export once per TargetName iscsi-target: Refactor iscsit_get_np sockaddr matching into iscsit_check_np_match target: Add missing mapped_lun bounds checking during make_mappedlun setup target: Fix lookup of dynamic NodeACLs during cached demo-mode operation target: Fix parameter list length checking in MODE SELECT target: Fix error checking for UNMAP commands target: Fix sense data for out-of-bounds IO operations target_core_rd: break out unterminated loop during copy tcm_vhost: Multi-queue support tcm_vhost: Multi-target support target: Add device attribute to expose config_item_name for INQUIRY model target: don't truncate the fail intr address target: don't always say "ipv6" as address type target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status iscsi-target: make some temporary buffers larger tcm_vhost: Optimize gup in vhost_scsi_map_to_sgl tcm_vhost: Use iov_num_pages to calculate sgl_count tcm_vhost: Introduce iov_num_pages ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband update from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.9: - SRP error handling fixes from Bart Van Assche - Implementation of memory windows for mlx4 from Shani Michaeli - Lots of cxgb4 HW driver fixes from Vipul Pandya - Make iSER work for virtual functions, other fixes from Or Gerlitz - Fix for bug in qib HW driver from Mike Marciniszyn - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman - Various cleanups and warning fixes from Julia Lawall, Paul Bolle, Wei Yongjun" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits) IB/mlx4: Advertise MW support IB/mlx4: Support memory window binding mlx4: Implement memory windows allocation and deallocation mlx4_core: Enable memory windows in {INIT, QUERY}_HCA mlx4_core: Disable memory windows for virtual functions IPoIB: Free ipoib neigh on path record failure so path rec queries are retried IB/srp: Fail I/O requests if the transport is offline IB/srp: Avoid endless SCSI error handling loop IB/srp: Avoid sending a task management function needlessly IB/srp: Track connection state properly IB/mlx4: Remove redundant NULL check before kfree IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool IB/iser: Enable iser when FMRs are not supported IB/iser: Avoid error prints on EAGAIN registration failures IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML IB/uverbs: Implement memory windows support in uverbs IB/core: Add "type 2" memory windows support mlx4_core: Propagate MR deregistration failures to caller mlx4_core: Rename MPT-related functions to have mpt_ prefix ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU Updates from Joerg Roedel: "Besides some fixes and cleanups in the code there are three more important changes to point out this time: * New IOMMU driver for the ARM SHMOBILE platform * An IOMMU-API extension for non-paging IOMMUs (required for upcoming PAMU driver) * Rework of the way the Tegra IOMMU driver accesses its registetrs - register windows are easier to extend now. There are also a few changes to non-iommu code, but that is acked by the respective maintainers." * tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (23 commits) iommu/tegra: assume CONFIG_OF in SMMU driver iommu/tegra: assume CONFIG_OF in gart driver iommu/amd: Remove redundant NULL check before dma_ops_domain_free(). iommu/amd: Initialize device table after dma_ops iommu/vt-d: Zero out allocated memory in dmar_enable_qi iommu/tegra: smmu: Fix incorrect mask for regbase iommu/exynos: Make exynos_sysmmu_disable static ARM: mach-shmobile: r8a7740: Add IPMMU device ARM: mach-shmobile: sh73a0: Add IPMMU device ARM: mach-shmobile: sh7372: Add IPMMU device iommu/shmobile: Add iommu driver for Renesas IPMMU modules iommu: Add DOMAIN_ATTR_WINDOWS domain attribute iommu: Add domain window handling functions iommu: Implement DOMAIN_ATTR_PAGING attribute iommu: Check for valid pgsize_bitmap in iommu_map/unmap iommu: Make sure DOMAIN_ATTR_MAX is really the maximum iommu/tegra: smmu: Change SMMU's dependency on ARCH_TEGRA iommu/tegra: smmu: Use helper function to check for valid register offset iommu/tegra: smmu: Support variable MMIO ranges/blocks iommu/tegra: Add missing spinlock initialization ...
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull DMA-mapping updates from Marek Szyprowski: "This time all patches are related only to ARM DMA-mapping subsystem. The main extension provided by this pull request is highmem support. Besides that it contains a bunch of small bugfixes and cleanups." * 'for-v3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementation ARM: dma-mapping: Add maximum alignment order for dma iommu buffers ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devices ARM: dma-mapping: add support for CMA regions placed in highmem zone arm: dma mapping: export arm iommu functions ARM: dma-mapping: Add arm_iommu_detach_device() ARM: dma-mapping: Add macro to_dma_iommu_mapping() ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask() ARM: iommu: Include linux/kref.h in asm/dma-iommu.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Intel ismt & Broadcom bcm2835 - a number of drivers got support for more variants and mostly got cleaned up on the way (sis630, i801, at91, tegra, designware) - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure - removed the i2c_smbus_process_call from the core since there are no users - mxs can now switch between PIO and DMA depending on the message size and the bus speed can now be arbitrary In addition, there is the usual bunch of fixes, cleanups, devm_* conversions, etc" Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls i2c: pxa: remove incorrect __exit annotations i2c: ocores: Fix pointer to integer cast warning i2c: tegra: remove warning dump if timeout happen in transfer i2c: fix i2c-ismt.c printk format warning i2c: i801: Add Device IDs for Intel Wellsburg PCH i2c: add bcm2835 driver i2c: ismt: Add Seth and Myself as maintainers i2c: sis630: checkpatch cleanup i2c: sis630: display unsigned hex i2c: sis630: use hex to constants for SMBus commands i2c: sis630: fix behavior after collision i2c: sis630: clear sticky bits i2c: sis630: Add SIS964 support i2c: isch: Add module parameter for backbone clock rate if divider is unset i2c: at91: fix unsed variable warning when building with !CONFIG_OF i2c: Adding support for Intel iSMT SMBus 2.0 host controller i2c: sh_mobile: don't send a stop condition by default inside transfers i2c: sh_mobile: eliminate an open-coded "goto" loop i2c: sh_mobile: fix timeout error handling ...
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull GPIO changes from Grant Likely: "This branch contains the usual set of individual driver improvements and bug fixes, as well as updates to the core code. The more notable changes include: - Internally add new API for referencing GPIOs by gpio_desc instead of number. Eventually this will become a public API - ACPI GPIO binding support" * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits) arm64: select ARCH_WANT_OPTIONAL_GPIOLIB gpio: em: Use irq_domain_add_simple() to fix runtime error gpio: using common order: let 'static const' instead of 'const static' gpio/vt8500: memory cleanup missing gpiolib: Fix locking on gpio debugfs files gpiolib: let gpio_chip reference its descriptors gpiolib: use descriptors internally gpiolib: use gpio_chips list in gpiochip_find_base gpiolib: use gpio_chips list in sysfs ops gpiolib: use gpio_chips list in gpiochip_find gpiolib: use gpio_chips list in gpiolib_sysfs_init gpiolib: link all gpio_chips using a list gpio/langwell: cleanup driver gpio/langwell: Add Cloverview ids to pci device table gpio/lynxpoint: add chipset gpio driver. gpiolib: add missing braces in gpio_direction_show gpiolib-acpi: Fix error checks in interrupt requesting gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping gpiolib: remove gpiochip_reserve() arm: pxa: tosa: do not use gpiochip_reserve() ...
-
git://gitorious.org/linux-pwm/linux-pwm由 Linus Torvalds 提交于
Pull PWM changes from Thierry Reding: "A new driver has been added to support the PWM mode of the timer counter blocks found on Atmel AT91 SoCs. The VT8500 driver now supports changing the PWM signal polarity and the TI drivers (EHRPWM and ECAP) gained suspend and resume functionality. User drivers can now query the core for whether access to a PWM device will sleep (if the PWM chip is on a slow bus such as I2C or SPI). The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK state in addition to the FB layer's blanking states. To round things off, a few fixes and cleanups are also included" * tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm: pwm: twl: Use to_twl() instead of container_of() pwm: tegra: assume CONFIG_OF pwm_backlight: Validate dft_brightness in main probe function pwm: Export pwm_{set,get}_chip_data() pwm: Make Kconfig entries more consistent pwm: Add can_sleep property to drivers pwm: Add pwm_can_sleep() as exported API to users pwm-backlight: handle BL_CORE_FBBLANK state pwm: pwm-tiecap: Low power sleep support pwm: pwm-tiehrpwm: Low power sleep support pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver pwm: vt8500: Add polarity support pwm: vt8500: Register write busy test performed incorrectly pwm: atmel: add Timer Counter Block PWM driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
Pull MMC update from Chris Ball: "MMC highlights for 3.9: Core: - Support for packed commands in eMMC 4.5. (This requires a host capability to be turned on. It increases write throughput by 20%+, but may also increase average write latency; more testing needed.) - Add DT bindings for capability flags. - Add mmc_of_parse() for shared DT parsing between drivers. Drivers: - android-goldfish: New MMC driver for the Android Goldfish emulator. - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection. - omap_hsmmc: Fix boot hangs with RPMB partitions. - sdhci-bcm2835: New driver for controller used by Raspberry Pi. - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio. - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs. - tmio_mmc: Add DT bindings, support for vccq regulator" * tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits) mmc: tegra: assume CONFIG_OF, remove platform data mmc: add DT bindings for more MMC capability flags mmc: tmio: add support for the VccQ regulator mmc: tmio: remove unused and deprecated symbols mmc: sh_mobile_sdhi: use managed resource allocations mmc: sh_mobile_sdhi: remove unused .pdata field mmc: tmio-mmc: parse device-tree bindings mmc: tmio-mmc: define device-tree bindings mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings mmc: (cosmetic) remove "extern" from function declarations mmc: provide a standard MMC device-tree binding parser centrally mmc: detailed definition of CD and WP MMC line polarities in DT mmc: sdhi, tmio: only check flags in tmio-mmc driver proper mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch() mmc: sdhci: check voltage range only on regulators aware of voltage value mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK mmc: support packed write command for eMMC4.5 devices mmc: add packed command feature of eMMC4.5 mmc: rtsx: remove driving adjustment mmc: use regulator_can_change_voltage() instead of regulator_count_voltages ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds由 Linus Torvalds 提交于
Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits) leds: leds-sunfire: use dev_err()/pr_err() instead of printk() leds: 88pm860x: Add missing of_node_put() leds: tca6507: Use of_get_child_count() leds: leds-pwm: make it depend on PWM and not HAVE_PWM Documentation: leds: update LP55xx family devices leds-lp55xx: fix problem on removing LED attributes leds-lp5521/5523: add author and copyright description leds-lp5521/5523: use new lp55xx common header leds-lp55xx: clean up headers leds-lp55xx: clean up definitions leds-lp55xx: clean up unused data and functions leds-lp55xx: clean up _remove() leds-lp55xx: add new function for removing device attribtues leds-lp55xx: code refactoring on selftest function leds-lp55xx: use common device attribute driver function leds-lp55xx: support device specific attributes leds-lp5523: use generic firmware interface leds-lp5521: use generic firmware interface leds-lp55xx: support firmware interface leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface ...
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
-
由 Roland Dreier 提交于
-
- 26 2月, 2013 22 次提交
-
-
由 Ben Hutchings 提交于
We must only ever stop TX queues when they are full or the net device is not 'ready' so far as the net core, and specifically the watchdog, is concerned. Otherwise, the watchdog may fire *immediately* if no packets have been added to the queue in the last 5 seconds. The device is ready if all the following are true: (a) It has a qdisc (b) It is marked present (c) It is running (d) The link is reported up (a) and (c) are normally true, and must not be changed by a driver. (d) is under our control, but fake link changes may disturb userland. This leaves (b). We already mark the device absent during reset and self-test, but we need to do the same during MTU changes and ring reallocation. We don't need to do this when the device is brought down because then (c) is already false. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We assume that the mapping between DMA and virtual addresses is done on whole pages, so we can find the page offset of an RX buffer using the lower bits of the DMA address. However, swiotlb maps in units of 2K, breaking this assumption. Add an explicit page_offset field to struct efx_rx_buffer. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We may currently allocate two RX DMA buffers to a page, and only unmap the page when the second is completed. We do not sync the first RX buffer to be completed; this can result in packet loss or corruption if the last RX buffer completed in a NAPI poll is the first in a page and is not DMA-coherent. (In the middle of a NAPI poll, we will handle the following RX completion and unmap the page *before* looking at the content of the first buffer.) Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: - Fixes for blackfin and microblaze build problems introduced by the removal of global pm_idle. From Lars-Peter Clausen. - OPP core build fix from Shawn Guo. - Error condition check fix for the new imx6q-cpufreq driver from Wei Yongjun. - Fix for an AER driver crash related to the lack of APEI initialization for acpi=off. From Rafael J Wysocki. - Fix for a USB breakage on Thinkpad T430 related to ACPI power resources and PCI wakeup from Rafael J. Wysocki. * tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Take unusual configurations of power resources into account imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe() PM / OPP: fix condition for empty of_init_opp_table() ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off microblaze idle: Fix compile error blackfin idle: Fix compile error
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm merge from Dave Airlie: "Highlights: - TI LCD controller KMS driver - TI OMAP KMS driver merged from staging - drop gma500 stub driver - the fbcon locking fixes - the vgacon dirty like zebra fix. - open firmware videomode and hdmi common code helpers - major locking rework for kms object handling - pageflip/cursor won't block on polling anymore! - fbcon helper and prime helper cleanups - i915: all over the map, haswell power well enhancements, valleyview macro horrors cleaned up, killing lots of legacy GTT code, - radeon: CS ioctl unification, deprecated UMS support, gpu reset rework, VM fixes - nouveau: reworked thermal code, external dp/tmds encoder support (anx9805), fences sleep instead of polling, - exynos: all over the driver fixes." Lovely conflict in radeon/evergreen_cs.c between commit de0babd6 ("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd") and the new changes that modified that evergreen_dma_cs_parse() function. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits) drm/tilcdc: only build on arm drm/i915: Revert hdmi HDP pin checks drm/tegra: Add list of framebuffers to debugfs drm/tegra: Fix color expansion drm/tegra: Split DC_CMD_STATE_CONTROL register write drm/tegra: Implement page-flipping support drm/tegra: Implement VBLANK support drm/tegra: Implement .mode_set_base() drm/tegra: Add plane support drm/tegra: Remove bogus tegra_framebuffer structure drm: Add consistency check for page-flipping drm/radeon: Use generic HDMI infoframe helpers drm/tegra: Use generic HDMI infoframe helpers drm: Add EDID helper documentation drm: Add HDMI infoframe helpers video: Add generic HDMI infoframe helpers drm: Add some missing forward declarations drm: Move mode tables to drm_edid.c drm: Remove duplicate drm_mode_cea_vic() gma500: Fix n, m1 and m2 clock limits for sdvo and lvds ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fix from Al Viro: "Fix for 3.8 breakage introduced by "vfs: Allow unprivileged manipulation of the mount namespace" - accessing mnt->mnt_ns is done there without needed locking *and* without any real need. Definite -stable fodder, fortunately not going too far back. This is *not* all - there will be much bigger vfs pull request tomorrow." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get rid of unprotected dereferencing of mnt->mnt_ns
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull user namespace and namespace infrastructure changes from Eric W Biederman: "This set of changes starts with a few small enhnacements to the user namespace. reboot support, allowing more arbitrary mappings, and support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the user namespace root. I do my best to document that if you care about limiting your unprivileged users that when you have the user namespace support enabled you will need to enable memory control groups. There is a minor bug fix to prevent overflowing the stack if someone creates way too many user namespaces. The bulk of the changes are a continuation of the kuid/kgid push down work through the filesystems. These changes make using uids and gids typesafe which ensures that these filesystems are safe to use when multiple user namespaces are in use. The filesystems converted for 3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The changes for these filesystems were a little more involved so I split the changes into smaller hopefully obviously correct changes. XFS is the only filesystem that remains. I was hoping I could get that in this release so that user namespace support would be enabled with an allyesconfig or an allmodconfig but it looks like the xfs changes need another couple of days before it they are ready." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits) cifs: Enable building with user namespaces enabled. cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t cifs: Convert struct cifs_sb_info to use kuids and kgids cifs: Modify struct smb_vol to use kuids and kgids cifs: Convert struct cifsFileInfo to use a kuid cifs: Convert struct cifs_fattr to use kuid and kgids cifs: Convert struct tcon_link to use a kuid. cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t cifs: Convert from a kuid before printing current_fsuid cifs: Use kuids and kgids SID to uid/gid mapping cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc cifs: Use BUILD_BUG_ON to validate uids and gids are the same size cifs: Override unmappable incoming uids and gids nfsd: Enable building with user namespaces enabled. nfsd: Properly compare and initialize kuids and kgids nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids nfsd: Modify nfsd4_cb_sec to use kuids and kgids nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion nfsd: Convert nfsxdr to use kuids and kgids nfsd: Convert nfs3xdr to use kuids and kgids ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM ARM compile fixes from Gleb Natapov: "Fix ARM KVM compilation breakage due to changes from kvm.git" * git://git.kernel.org/pub/scm/virt/kvm/kvm: ARM: KVM: fix compilation after removal of user_alloc from struct kvm_memory_slot ARM: KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS ARM: KVM: fix kvm_arch_{prepare,commit}_memory_region
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto update from Herbert Xu: "Here is the crypto update for 3.9: - Added accelerated implementation of crc32 using pclmulqdq. - Added test vector for fcrypt. - Added support for OMAP4/AM33XX cipher and hash. - Fixed loose crypto_user input checks. - Misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (43 commits) crypto: user - ensure user supplied strings are nul-terminated crypto: user - fix empty string test in report API crypto: user - fix info leaks in report API crypto: caam - Added property fsl,sec-era in SEC4.0 device tree binding. crypto: use ERR_CAST crypto: atmel-aes - adjust duplicate test crypto: crc32-pclmul - Kill warning on x86-32 crypto: x86/twofish - assembler clean-ups: use ENTRY/ENDPROC, localize jump labels crypto: x86/sha1 - assembler clean-ups: use ENTRY/ENDPROC crypto: x86/serpent - use ENTRY/ENDPROC for assember functions and localize jump targets crypto: x86/salsa20 - assembler cleanup, use ENTRY/ENDPROC for assember functions and rename ECRYPT_* to salsa20_* crypto: x86/ghash - assembler clean-up: use ENDPROC at end of assember functions crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC crypto: cast6-avx: use ENTRY()/ENDPROC() for assembler functions crypto: cast5-avx: use ENTRY()/ENDPROC() for assembler functions and localize jump targets crypto: camellia-x86_64/aes-ni: use ENTRY()/ENDPROC() for assembler functions and localize jump targets crypto: blowfish-x86_64: use ENTRY()/ENDPROC() for assembler functions and localize jump targets crypto: aesni-intel - add ENDPROC statements for assembler functions crypto: x86/aes - assembler clean-ups: use ENTRY/ENDPROC, localize jump targets crypto: testmgr - add test vector for fcrypt ...
-
由 Stephen Rothwell 提交于
[airlied: hack for now until we fix cma helpers on other OF platforms] Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 update from Tony Luck: "ia64 vm patch series that was cooking in -mm tree" * tag 'please-pull-vm_unwrapped' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: mm: use vm_unmapped_area() in hugetlbfs on ia64 architecture mm: use vm_unmapped_area() on ia64 architecture
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security subsystem fixes from James Morris: "From Mimi: Both of these patches are bug fixes for patches, which were upstreamed in this open window. The first patch addresses a merge issue. The second patch addresses a CONFIG_BLOCK dependency." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: block: fix part_pack_uuid() build error ima: "remove enforce checking duplication" merge fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest由 Linus Torvalds 提交于
Pull ktest update from Steven Rostedt: "Added ability to have all builds test warnings. Fixed failing reboot when the reboot produces a non fatal error. Config reading fixes and other cleanups" * tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Remove indexes from warnings check ktest: Ignore warnings during reboot ktest: Search for linux banner for successful reboot ktest: Add make_warnings_file and process full warnings ktest: Allow a test option to use its default option ktest: Strip off '\n' when reading which files were modified ktest: Do not require CONSOLE for build or install bisects
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module update from Rusty Russell: "The sweeping change is to make add_taint() explicitly indicate whether to disable lockdep, but it's a mechanical change." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Add option to not sign modules during modules_install MODSIGN: Add -s <signature> option to sign-file MODSIGN: Specify the hash algorithm on sign-file command line MODSIGN: Simplify Makefile with a Kconfig helper module: clean up load_module a little more. modpost: Ignore ARC specific non-alloc sections module: constify within_module_* taint: add explicit flag to show whether lock dep is still OK. module: printk message when module signature fail taints kernel.
-
由 Ming Lei 提交于
The name of FEATURE_AUTOSUSPEND is very misleading and the actual meaning is remote wakeup, but a device incapable of remote wakeup still can support USB autosuspend under some situations, so rename it to avoid misunderstanding. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
Commit b2d4b150(smsc95xx: enable dynamic autosuspend) implements autosuspend, but breaks current runtime suspend, such as: when the interface becomes down, the usb device can't be put into runtime suspend any more. This patch fixes the broken runtime suspend. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
The three below functions: smsc95xx_enter_suspend0() smsc95xx_enter_suspend1() smsc95xx_enter_suspend2() return > 0 in case of success, so they will cause smsc95xx_suspend() to return > 0 and cause suspend failure. The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling in suspend failure case). Cc: <stable@vger.kernel.org> [3.8] Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafał Miłecki 提交于
We were using the same variable for iterating two nested loops. Reported-by: NTijs Van Buggenhout <tvb@able.be> Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Larry Finger 提交于
On unload, b43 produces a lockdep warning that can be summarized in the following way: ====================================================== [ INFO: possible circular locking dependency detected ] 3.8.0-wl+ #117 Not tainted ------------------------------------------------------- modprobe/5557 is trying to acquire lock: ((&wl->firmware_load)){+.+.+.}, at: [<ffffffff81062160>] flush_work+0x0/0x2a0 but task is already holding lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff813bd7d2>] rtnl_lock+0x12/0x20 which lock already depends on the new lock. [ INFO: possible circular locking dependency detected ] ====================================================== The full output is available at http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00060.html. To summarize, commit 6b6fa586 added a 'cancel_work_sync(&wl->firmware_load)' call in the wrong place. The fix is to move the cancel_work_sync() call to b43_bcma_remove() and b43_ssb_remove(). Thanks to Johannes Berg and Michael Buesch for help in diagnosing the log output. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V3.5+] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
This reverts commit eb6b9a8c. Above commit limits GSO capability of gre device to just TSO, but software GRE-GSO is capable of handling all GSO capabilities. This patch also fixes following panic which reverted commit introduced:- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a2 IP: [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] PGD 42bc19067 PUD 42bca9067 PMD 0 Oops: 0000 [#1] SMP Pid: 2636, comm: ip Tainted: GF 3.8.0+ #83 Dell Inc. PowerEdge R620/0KCKR5 RIP: 0010:[<ffffffffa0680fd1>] [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] RSP: 0018:ffff88042bfcb708 EFLAGS: 00010246 RAX: 00000000000005b6 RBX: ffff88042d2fa000 RCX: 0000000000000044 RDX: 0000000000000018 RSI: 0000000000000078 RDI: 0000000000000060 RBP: ffff88042bfcb748 R08: 0000000000000018 R09: 000000000000000c R10: 0000000000000020 R11: 000000000101010a R12: ffff88042d2fa800 R13: 0000000000000000 R14: ffff88042d2fa800 R15: ffff88042cd7f650 FS: 00007fa784f55700(0000) GS:ffff88043fd20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a2 CR3: 000000042d8b9000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ip (pid: 2636, threadinfo ffff88042bfca000, task ffff88042d142a80) Stack: 0000000100000000 002f000000000000 0a01010100000000 000000000b010101 ffff88042d2fa800 ffff88042d2fa000 ffff88042bfcb858 ffff88042f418c00 ffff88042bfcb798 ffffffffa068199a ffff88042bfcb798 ffff88042d2fa830 Call Trace: [<ffffffffa068199a>] ipgre_newlink+0xca/0x160 [ip_gre] [<ffffffff8143b692>] rtnl_newlink+0x532/0x5f0 [<ffffffff8143b2fc>] ? rtnl_newlink+0x19c/0x5f0 [<ffffffff81438978>] rtnetlink_rcv_msg+0x2c8/0x340 [<ffffffff814386b0>] ? rtnetlink_rcv+0x40/0x40 [<ffffffff814560f9>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81438695>] rtnetlink_rcv+0x25/0x40 [<ffffffff81455ddc>] netlink_unicast+0x1ac/0x230 [<ffffffff81456a45>] netlink_sendmsg+0x265/0x380 [<ffffffff814138c0>] sock_sendmsg+0xb0/0xe0 [<ffffffff8141141e>] ? move_addr_to_kernel+0x4e/0x90 [<ffffffff81420445>] ? verify_iovec+0x85/0xf0 [<ffffffff81414ffd>] __sys_sendmsg+0x3fd/0x420 [<ffffffff8114b701>] ? handle_mm_fault+0x251/0x3b0 [<ffffffff8114f39f>] ? vma_link+0xcf/0xe0 [<ffffffff81415239>] sys_sendmsg+0x49/0x90 [<ffffffff814ffd19>] system_call_fastpath+0x16/0x1b CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
commit "ip_gre: allow CSUM capable devices to handle packets" aa0e51cd, broke GRE_CSUM case. GRE_CSUM needs checksum computed for inner packet. Therefore csum-calculation can not be offloaded if tunnel device requires GRE_CSUM. Following patch fixes it by computing inner packet checksum for GRE_CSUM type, for all other type of GRE devices csum is offloaded. CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-