The Arria10 SOC uses a completely different SDRAM controller from the
earlier CycloneV and ArriaV SoCs. The memory size is calculated in the
bootloader and passed via the device tree. Using this device tree size
is more generic than using the register fields to calculate the memory
size for different SDRAM controllers.
Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: devicetree@vger.kernel.org
Cc: dinguyen@opensource.altera.com
Cc: galak@codeaurora.org
Cc: grant.likely@linaro.org
Cc: ijc+devicetree@hellion.org.uk
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: m.chehab@samsung.com
Cc: mark.rutland@arm.com
Cc: pawel.moll@arm.com
Cc: robh+dt@kernel.org
Cc: tthayer.linux@gmail.com
Link: http://lkml.kernel.org/r/1433428128-7292-2-git-send-email-tthayer@opensource.altera.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Provide information about each injection file and its usage for ease of
use and in-band documentation. This is a good idea adapted from ftrace.
Signed-off-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1433277362-10911-7-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Add per-file permissions to the dfs_fls[] array.

In a later patch, we will add a README file that needs different
permissions. Hence the move here to add a perm field.
Signed-off-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1433277362-10911-6-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Use strings such as "hw" or "sw" to indicate the type of error injection
to be performed.

Current flags attribute derives the meanings of values that can be
programmed into it from asm/mce.h. Moving to defined strings for the
attribute allows this module to be self-sufficient and removes the
dependency. Also, we can introduce new flags as and when needed without
having to worry about conflicting with the flags already defined in
asm/mce.h.

Also, modify do_inject() to use the newly defined injection_type enum to
figure out the injection mechanism we need to use
Suggested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1433277362-10911-4-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Use strstrip() return value. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

The number of banks for a given processor is encoded in
MSR_IA32_MCG_CAP[7:0]. So obtain the value from that MSR and use it for
sanity checking in inj_bank_set() instead of doing a family/model check.
Signed-off-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Link: http://lkml.kernel.org/r/1432753418-2985-3-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>

inj_bank_get() is generic enough that we can use the MCE_INJECT_GET
macro instead.

No functionality change.
Signed-off-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1433277362-10911-2-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>

The new x-gene EDAC driver incorrectly tried to figure out the version
of one of its IP blocks by looking at the version of the CPU core, which
is only vagely related.

This removes the incorrect code and instead uses the version of the IP
block in the compatible string where it belongs.

Found using build testing on x86, which does not provide the arm64
cpuid interface.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[ Changed subnode to "apm,xgene-edac-pmd-v2", adjusted check. ]
Signed-off-by: NLoc Ho <lho@apm.com>
Cc: devicetree@vger.kernel.org
Cc: dougthompson@xmission.com
Cc: ijc+devicetree@hellion.org.uk
Cc: jcm@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: mchehab@osg.samsung.com
Cc: patches@apm.com
Cc: robh+dt@kernel.org
Link: http://lkml.kernel.org/r/3195065.IK73o60xya@wuerfelSigned-off-by: NBorislav Petkov <bp@suse.de>

Extend err_addr to cover 64 bits for DDR errors.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Acked-by: NJohannes Thumshirn <morbidrsa@gmail.com>
Cc: Mingkai.hu@freescale.com
Link: http://lkml.kernel.org/r/1431425022-44766-2-git-send-email-Wenbin.Song@freescale.comSigned-off-by: Nsongwenbin <wenbin.song@freescale.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>

Remove mpc83xx and mpc85xx as dependency.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Acked-by: NJohannes Thumshirn <morbidrsa@gmail.com>
Cc: Mingkai.hu@freescale.com
Link: http://lkml.kernel.org/r/1431425022-44766-1-git-send-email-Wenbin.Song@freescale.comSigned-off-by: Nsongwenbin <wenbin.song@freescale.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>

<asm/edac.h> contains only the arch-specific scrubbing function and is
thus not needed in edac_stub.c. Kill it.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Add support for the APM X-Gene SoC EDAC driver.
Signed-off-by: NLoc Ho <lho@apm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: devicetree@vger.kernel.org
Cc: dougthompson@xmission.com
Cc: ijc+devicetree@hellion.org.uk
Cc: jcm@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: mchehab@osg.samsung.com
Cc: patches@apm.com
Cc: robh+dt@kernel.org
Link: http://lkml.kernel.org/r/1432337580-3750-5-git-send-email-lho@apm.comSigned-off-by: NBorislav Petkov <bp@suse.de>

So first of all, this atomic_scrub() function's naming is bad. It looks
like an atomic_t helper. Change it to edac_atomic_scrub().

The bigger problem is that this function is arch-specific and every new
arch which doesn't necessarily need that functionality still needs to
define it, otherwise EDAC doesn't compile.

So instead of doing that and including arch-specific headers, have each
arch define an EDAC_ATOMIC_SCRUB symbol which can be used in edac_mc.c
for ifdeffery. Much cleaner.

And we already are doing this with another symbol - EDAC_SUPPORT. This
is also much cleaner than having CONFIG_EDAC enumerate all the arches
which need/have EDAC support and drivers.

This way I can kill the useless edac.h header in tile too.
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NChris Metcalf <cmetcalf@ezchip.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "Maciej W. Rozycki" <macro@codesourcery.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Steven J. Hill" <Steven.Hill@imgtec.com>
Cc: x86@kernel.org
Signed-off-by: NBorislav Petkov <bp@suse.de>

The SDRAM EDAC requires SDRAM configuration/initialization before SDRAM
is accessed (in the preloader) and therefore before Linux is loaded.
Having a module compile is not desired so force to be built into kernel.
Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Cc: mchehab@osg.samsung.com
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1429308974-26380-3-git-send-email-tthayer@opensource.altera.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The new Atmel MXT driver expects i2c client's address contain the
primary (main address) of the chip, and calculates the expected
bootloader address form the primary address. Unfortunately chrome_laptop
does probe the devices and if touchpad (or touchscreen, or both) comes
up in bootloader mode the i2c device gets instantiated with the
bootloader address which confuses the driver.

To work around this issue let's probe the primary address first. If the
device is not detected at the primary address we'll probe alternative
addresses as "dummy" devices. If any of them are found, destroy the
dummy client and instantiate client with proper name at primary address
still.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

commit a39f46df ("toshiba_acpi: Fix regression caused by backlight extra
check code") causes the backlight to no longer work on the Toshiba Z30,
reverting that commit fixes this but restores the original issue fixed
by that commit.

Looking at the toshiba_acpi backlight code for a fix for this I noticed that
the toshiba code is the only code under platform/x86 which unconditionally
registers a vendor acpi backlight interface, without checking for acpi_video
backlight support first.

This commit adds the necessary checks bringing toshiba_acpi in line with the
other drivers, and fixing the Z30 regression without needing to revert the
commit causing it.

Chances are that there will be some Toshiba models which have a non working
acpi-video implementation while the toshiba vendor backlight interface does
work, this commit adds an empty dmi_id table where such systems can be added,
this is identical to how other drivers handle such systems.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1206036
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=86521Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-and-tested-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

If NO_DMA=y:

    drivers/built-in.o: In function `img_hash_write_via_dma_stop':
    img-hash.c:(.text+0xa2b822): undefined reference to `dma_unmap_sg'
    drivers/built-in.o: In function `img_hash_xmit_dma':
    img-hash.c:(.text+0xa2b8d8): undefined reference to `dma_map_sg'
    img-hash.c:(.text+0xa2b948): undefined reference to `dma_unmap_sg'

Also move the "depends" section below the "tristate" line while we're at
it.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the special PRP0001 device ID is present in the given device's list
of ACPI/PNP IDs and the device has a valid "compatible" property in
the _DSD, it should be enumerated using the default mechanism,
unless some scan handlers match the IDs preceding PRP0001 in the
device's list of ACPI/PNP IDs.  In addition to that, no scan handlers
matching the IDs following PRP0001 in that list should be attached
to the device.

To make that happen, define a scan handler that will match PRP0001
and trigger the default enumeration for the matching devices if the
"compatible" property is present for them.

Since that requires the check for platform_id and device->handler
to be removed from acpi_default_enumeration(), move the fallback
invocation of acpi_default_enumeration() to acpi_bus_attach()
(after it's checked if there's a matching ACPI driver for the
device), which is a better place to call it, and do the platform_id
check in there too (device->handler is guaranteed to be unset at
the point where the function is looking for a matching ACPI driver).
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>

acpi_scan_is_offline() may be called under the physical_node_lock
lock of the given device object's parent, so prevent lockdep from
complaining about that by annotating that instance with
SINGLE_DEPTH_NESTING.

Fixes: caa73ea1 (ACPI / hotplug / driver core: Handle containers in a special way)
Reported-and-tested-by: NXie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Due this typo we don't save/restore the GFX_MAX_REQ_COUNT register across
suspend/resume, so fix this.

This was introduced in

commit ddeea5b0
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon May 5 15:19:56 2014 +0300

    drm/i915: vlv: add runtime PM support

I noticed this only by reading the code. To my knowledge it shouldn't
cause any real problems at the moment, since the power well backing this
register remains on across a runtime s/r. This may change once
system-wide s0ix functionality is enabled in the kernel.

v2:
- resend after a missing git add -u :/

Cc: stable@vger.kernel.org
Signed-off-by: NImre Deak <imre.deak@intel.com>
Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

WaIdleLiteRestore is an execlists-only workaround, and requires the driver
to ensure that any context always has HEAD!=TAIL when attempting lite
restore.

Add two extra MI_NOOP instructions at the end of each request, but keep
the requests tail pointing before the MI_NOOPs. We may not need to
executed them, and this is why request->tail is sampled before adding
these extra instructions.

If we submit a context to the ELSP which has previously been submitted,
move the tail pointer past the MI_NOOPs. This ensures HEAD!=TAIL.

v2: Move overallocation to gen8_emit_request, and added note about
sampling request->tail in commit message (Chris).

v3: Remove redundant request->tail assignment in __i915_add_request, in
lrc mode this is already set in execlists_context_queue.
Do not add wa implementation details inside gem (Chris).

v4: Apply the wa whenever the req has been resubmitted and update
comment (Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The hardware, according to the specs, is limited to 256 byte transfers,
and current driver has no protections in case users attempt to do larger
transfers. The code will just stomp over status register and mayhem
ensues.

Let's split larger transfers into digestable chunks. Doing this allows
Atmel MXT driver on Pixel 1 function properly (it hasn't since commit
9d8dc3e5 "Input: atmel_mxt_ts -
implement T44 message handling" which tries to consume multiple
touchscreen/touchpad reports in a single transaction).

Cc: stable@vger.kernel.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The driver uses pinctrl directly and thus should include the appropriate
header. Sort the headers while we are here to have a better view what is
included and what is not.
Reported-by: NPascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Those symlinks are created for the mux_dev, so we need to remove it from
there. Currently, it breaks for muxes where the mux_dev is not the device
of the parent adapter like this:

[   78.234644] WARNING: CPU: 0 PID: 365 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x78()
[   78.242438] sysfs: cannot create duplicate filename '/devices/platform/i2cbus@8/channel-0'

Remove confusing comments while we are here.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Fixes: c9449aff
Cc: stable@kernel.org

And sort them to prevent this from happening again.
Reported-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Commit 523c5b89 ("i2c: Remove support for legacy PM") removed the PM
ops from the bus type, which causes the pm operations on the s3c2410
adapter device to fail (-ENOSUPP in rpm_callback). The adapter device
doesn't get bound to a driver and as such can't have its own pm_runtime
callbacks. Previously this was fine as the bus callbacks would have been
used, but now this can cause devices which use PM runtime and are
attached over I2C to fail to resume.

This commit fixes this issue by marking all adapter devices with
pm_runtime_no_callbacks, since they can't have any.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: NBeata Michalska <b.michalska@samsung.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Fixes: 523c5b89
Cc: stable@kernel.org

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>

master_xfer() method should return number of i2c messages transferred,
but on Rockchip we were usually returning just 1, which caused trouble
with users that actually check number of transferred messages vs.
checking for negative error codes.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

For platforms that don't support DT, some early MFD modules can register
lookup tables. Remove the __init annotation so that this works. This is
similar to gpio_add_lookup_table() which allows late additions.

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

HSU_DMA is selected by the HSU_DMA_PCI driver, this should be user selected
so remove the user prompt for this
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After the switch to blk-mq rbd_wq processes requests, not devices.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use fixed length string for register names. This saves 416 bytes
in text size.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Fix some trivial coding style issues to reduce noise from static analyzers.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Convert OCTEON watchdog to WATCHDOG_CORE API. This enables support
for multiple watchdogs on OCTEON boards.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Remove Kconfig dependency and enable driver for
all ARCHs.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

MSM watchdog configuration happens in the same register block as the
timer, so we'll use the same binding as the existing timer.

The qcom-wdt will now be probed when devicetree has an entry compatible
with "qcom,kpss-timer" or "qcom-scss-timer".
Signed-off-by: NMathieu Olivari <mathieu@codeaurora.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: Guenter Roeck <linux~roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>