Dig up the appropriate new crtc and plane states from the top level
atomic state in intel_pre_plane_update() and intel_post_plane_update().
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-5-ville.syrjala@linux.intel.com

Eliminate plane->state and crtc->state usage from
intel_plane_atomic_check_with_state() and its callers. Instead pass the
proper states in or dig them up from the top level atomic state.

Note that intel_plane_atomic_check_with_state() itself isn't allowed to
use the top level atomic state as there is none when it gets called from
the legacy cursor short circuit path.

v2: Rename some variables for easier comprehension (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-4-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

We can now make use of the intel_device_info.gt field.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-4-lionel.g.landwerlin@intel.com

As recommended by Chris.

v2: Switch from __initdata to __initconst.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-3-lionel.g.landwerlin@intel.com

Up to Coffeelake we could deduce this GT number from the device ID.
This doesn't seem to be the case anymore. This change reorders pciids
per GT and adds a gt field to intel_device_info. We set this field on
the following platforms :

   - SNB/IVB/HSW/BDW/SKL/KBL/CFL/CNL

Before & After :

$ modinfo drivers/gpu/drm/i915/i915.ko | grep ^alias | wc -l
209

v2: Add SNB & IVB (Chris)

v3: Fix compilation error in early-quirks (Lionel)

v4: Fix inconsistency between FEATURE/PLATFORM macros (Ville)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-2-lionel.g.landwerlin@intel.com

This patch fixes the DP AUX CH timeouts observed during CI runs causing
CI Failures on a specific PCI device. This issue was fixed previously
by adding a quirk but looks like we need to increase this delay even more
in order to get rid all the DP AUX CH timeouts.

Fixes: c99a259b ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502823591-25310-1-git-send-email-manasi.d.navare@intel.com

Use explicit old/new states instead of relying on obj->state.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-4-ville.syrjala@linux.intel.com

Pass the appropriate new crtc state explicitly to
intel_pipe_update_start/end() instead of of mucking around with
crtc->state.

v2: The mmio flip stuff is gone

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v1
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-2-ville.syrjala@linux.intel.com

In an effort to eliminate the obj->state usage let's pass on the
new crtc state pointer (which we already have!) to the color management
code.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-1-ville.syrjala@linux.intel.com

Currently the .modeset_calc_cdclk() hooks check the final cdclk value
against the max allowed. That's not really sufficient since the low
level calc_cdclk() functions effectively clamp the minimum required
cdclk to the max supported by the platform. Hence if the minimum
required exceeds the platforms capabilities we'd keep going anyway
using the max cdclk frequency.

To fix that let's move the check earlier into
intel_crtc_compute_min_cdclk() and we'll check the minimum required
cdclk of the pipe against the maximum supported by the platform.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170710193347.8734-2-ville.syrjala@linux.intel.comReviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

Make the min_pixclk thing less confusing by changing it to track
the minimum acceptable cdclk frequency instead. This means moving
the application of the guardbands to a slightly higher level from
the low level platform specific calc_cdclk() functions.

The immediate benefit is elimination of the confusing 2x factors
on GLK/CNL+ in the audio workarounds (which stems from the fact
that the pipes produce two pixels per clock).

v2: Keep cdclk higher on CNL to workaround missing DDI clock voltage handling
v3: Squash with the CNL cdclk limits patch (DK)
v4: s/intel_min_cdclk/intel_pixel_rate_to_cdclk/ (DK)

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830185703.8189-1-ville.syrjala@linux.intel.com

On clock recovery this function is called to find out
the max voltage swing level that we could go.

However gen 9 functions use the old buffer translation tables
to figure that out. That table is not valid for CNL
causing an invalid number of entries and an invalid selection
on the max voltage swing level.

v2: Let's use same approach that previous platforms.
v3: Actually use n_entries and avoid duplicated -1.
v4: Avoid cnl_max_level and use current style.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170831145356.15932-1-rodrigo.vivi@intel.com

Let's get a proper HDMI DDI entry level for vswing programming
sequences on CNL.

Spec doesn't specify any default for HDMI tables,
so let's pick the last entry as the default for now.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-7-rodrigo.vivi@intel.com

No functional changes. But those functions will be needed
to get max level for HDMI and DP, so let's move those
up closer to other similar functions existent for previous
platforms.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-6-rodrigo.vivi@intel.com

Let's start converging CNL buf translations to same style
used on previous platforms. So first thing is to use the
standard signature so we don't need to propagate the voltage
check into other parts of the code, but only on the parts
that it is really useful.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-5-rodrigo.vivi@intel.com

Sequences for DisplayPort asks us to
" Configure voltage swing and related IO settings.
Refer to DDI Buffer section."

before "Configure and enable DDI_BUF_CTL"

On BXT and CNL this means to execute the ddi vswing sequences.

At this point these sequences calls are getting duplicated for DP
because they are all called from DP link trainning sequences.

However this patch is not yet removing it before a futher discussion
since spec also allows that during link training without disabling
anything:

"
Notes
Changing voltage swing during link training:
Change the swing setting following the DDI Buffer section.
The port does not need to be disabled.
"

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-4-rodrigo.vivi@intel.com

Vswing sequences on BXT and CNL are equivalent
to the ddi buffer registers setting on other platforms.

For some reason it got aligned with skl_ddi_set_iboost what
is semantically incorrect. This forced us to keep skipping
ddi buffer translation tables on the platforms that has
the vswing sequences.

v2: Don't mess with DP signal levels on this patch.

Cc: Vandana Kannan <vandana.kannan@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-3-rodrigo.vivi@intel.com

Let's decouple bxt, glk and cnl dp signal levels
from other DDIs to avoid confusion.

No functional change. Only a reorg to avoid messing
with currently working DP signal levels when
moving voltage swing sequences around to match spec.

v2: ddi_signal_levels is also called from other ddi
    platforms, so don't remove IS_GEN9_BC check from
    skl_ddi_set_iboos. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-2-rodrigo.vivi@intel.com

No functional changes. This only moves the DP level
selection to a separated function that will be later
used to organize better the vswing sequences.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829232230.23051-1-rodrigo.vivi@intel.com

Driver’s CPU access to GTT is via the GTTMMADR BAR.

The current HW implementation of that BAR is to only
support <= DW (and maybe QW) writes—not 16/32/64B writes
that could occur with WC and/or SSE/AVX moves.

GTTMMADR must be marked uncacheable (UC).
Accesses to GTTMMADR(GTT), must be 64 bits or less (ie. 1 GTT entry).

v2: Get clarification on the reasons and spec is getting
    updated to reflect it now.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Suggested-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230907.21363-1-rodrigo.vivi@intel.com

On CNL B0 stepping GAM is not able to detect some deadlock
condition and then rise the rise the gam_coh_flush.

WA database and spec both mentions to set 4AB8[24]=1 as
workaround. Although register offset 0x4AB8 is not
documented for any platform.

References: HSD#1945815, BSID#1112

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230751.21047-1-rodrigo.vivi@intel.com

WA to enable HW L1 Banking fix that allows aniso to operate
at full sample rate.

References: HSD#1937670

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Anuj Phogat <anuj.phogat@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829230723.20898-1-rodrigo.vivi@intel.com

No functional changes.

Our code was only a bit messy with mixed style there so
let's clean up a bit using the short codenames for the platforms.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829052026.15038-1-rodrigo.vivi@intel.com

The CCS won't have the same stride as the main surface anyway so trying
to guard against the fence stride not matching the CCS stride is
not sensible. Just skip the fence vs. fb alignment check for the aux
plane.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-3-ville.syrjala@linux.intel.comReviewed-by: NBen Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb05 ("drm/i915: Add render decompression support")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Userspace wants to treat fb->offsets[] as raw byte offsets into the gem
bo. Adjust the kernel code to match.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-2-ville.syrjala@linux.intel.comAcked-by: NBen Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb05 ("drm/i915: Add render decompression support")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Since we hold the device wakeref when writing through the GTT (otherwise
the writes would fail), we presumed that before the device sleeps those
writes would naturally be flushed and that we wouldn't need our mmio
read trick. However, that presumption seems false and a sleepy bxt seems
to require us to always manually flush the GTT writes prior to direct
access.

Fixes: e2a2aa36 ("drm/i915: Check we have an wake device before flushing GTT writes")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829192546.1087-1-chris@chris-wilson.co.uk

If we fail to clear the outstanding request queue before suspending,
mark those requests as lost.

References: https://bugs.freedesktop.org/show_bug.cgi?id=102037Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-3-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

When we wake up from suspend, the device has been powered down and
should come back afresh. We should be able to safely remove the wedged
status from the previous session and start afresh.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-2-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

When we do a locked idle we know that afterwards all requests have been
completed and the engines have been cleared of tasks. For whatever
reason, this doesn't always happen and we may go into a suspend with
ELSP still full, and this causes an issue upon resume as we get very,
very confused.

If the engines refuse to idle, mark the device as wedged. In the process
we get rid of the maybe unused open-coded version of wait_for_engines
reported by Nick Desaulniers and Matthias Kaehlcke.

v2: Suppress the -EIO before suspend, but keep it for seqno wrap.

References: https://bugs.freedesktop.org/show_bug.cgi?id=101891
References: https://bugs.freedesktop.org/show_bug.cgi?id=102456Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826110935.10237-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

If we are using the cmdparser, we will have to copy the batch and so
stall for the relocations. Rather than prolong that stall by adding more
relocation requests, just use CPU relocations and do the stall upfront.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170826135620.25949-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Sometimes we know we are the only user of the bo, but since we take a
protective pin_pages early on, an attempt to change the vmap on the
object is denied because it is busy. i915_gem_object_pin_map() cannot
tell from our single pin_count if the operation is safe. Instead we must
pass that information down from the caller in the manner of
I915_MAP_OVERRIDE.

This issue has existed from the introduction of the mapping, but was
never noticed as the only place where this conflict might happen is for
cached kernel buffers (such as allocated by i915_gem_batch_pool_get()).
Until recently there was only a single user (the cmdparser) so no
conflicts ever occurred. However, we now use it to allocate batches for
different operations (using MAP_WC on !llc for writes) in addition to the
existing shadow batch (using MAP_WB for reads).

We could either keep both mappings cached, or use a different write
mechanism if we detect a MAP_WB already exists (i.e. clflush
afterwards), but as we haven't seen this issue in the wild (it requires
hitting the GPU reloc path in addition to the cmdparser) for simplicity
just allow the mappings to be recreated.

v2: Include the i915_MAP_OVERRIDE bit in the enum so the compiler knows
about all the valid values.

Fixes: 7dd4f672 ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_lut_handle # byt, completely by accident
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828104631.8606-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

  CHECK   drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_display.c:3753 intel_finish_reset() warn: inconsistent indenting
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828104604.8552-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Commit 6e644626 ("drm/i915: Beef up the IPS vs. CRC
workaround") was supposed to solve below bug. However, the
patch I tested is not the same as the one that got merged.
With this addition the test pass.

V2: removed unused: "struct intel_crtc *intel_crtc"

Fixes: 6e644626 ("drm/i915: Beef up the IPS vs. CRC workaround")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101664Signed-off-by: NMarta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828121810.13112-1-marta.lofstedt@intel.com

Copy over some fields defined in the intel_vbt_decode tool. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a42f0e4d1bba2679e9cd78da1e31b66133d562f.1503670197.git.jani.nikula@intel.com

Copy over some fields defined in the intel_vbt_decode tool. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bce6907fa24d80643b33d58091d7675ff3b4f30e.1503670197.git.jani.nikula@intel.com

Copy over some fields defined in the intel_vbt_tool. No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/884cf56c019999a2c826da7e50a5fbf1aec5146b.1503670197.git.jani.nikula@intel.com

This is according to the style all over the place. No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf5f0e5d10851db3796e632836d23551f59cc412.1503670197.git.jani.nikula@intel.com

Since we use a worker to enable FBC on the CRTC, it is possible for the
CRTC to be switched off before we run. In this case, the CRTC will not
allow us to wait upon a vblank, so remove the DRM_ERROR as this is very
much expected.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102410
Fixes: ca18d51d ("drm/i915/fbc: wait for a vblank instead of 50ms when enabling")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170825150215.19236-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When FBC is enabled for linear, legacy Y-tiled and Yf-tiled
surfaces on gen9, the cfb stride must be programmed by SW as

cfb_stride = ceiling[(at least plane width in pixels)/
		     (32 * compression limit factor)] * 8

v2: Minor fix for a build error
v3: Fixed subject, register name and platform check (Ville)
v4: Added WA details in comment (Paulo)
v5:
 - Read modified reg write to preserve other bit values (Paulo)
 - Store modified stride value in reg_params (Paulo)
 - Keep GLK out of the WA (Paulo)
v6:
 - added additional field in reg_params for gen9_wa_cfb_stride (Paulo)
 - Used appropriate bit mask while writing the register (Paulo)
v7 (from Paulo):
 - Fix coding style and spacing issues.
 - Mask the old values before writing.
 - Bikeshed comments and unnecessary checks.
Signed-off-by: NPraveen Paneri <praveen.paneri@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502389833-32621-1-git-send-email-praveen.paneri@intel.com

We have the macro, use it. Makes the code a little easier to
understand.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170825194004.26571-1-paulo.r.zanoni@intel.com