- Use printk formatting for indentation
- Don't leave NTFS in the default event filter
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cc: "Michael Kerrisk" <mtk-manpages@gmx.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the partition code in fs/partitions/check.c to initialize a newly
detected partition's policy field with that of the containing block device
(see patch below).

My reasoning is that function set_disk_ro() in block/genhd.c modifies the
policy field (read-only indicator) of a disk and all contained partitions.
When a partition is detected after the call to set_disk_ro(), the policy
field of this partition will currently not inherit the disk's policy field.
 This behavior poses a problem in cases where a block device can be
'logically de- and reactivated' like e.g.  the s390 DASD driver because
partition detection may run after the policy field has been modified.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Acked-by: NAl Viro <viro@ftp.linux.org.uk>
Makes-sense-to: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch Description:
Add "Specialix IO8+ card support" hotplug support

patch location:
http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=d795cfc591bb44f6b3d86d8f054a227cecb44bb4

[akpm@osdl.org: cleanup]
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NChuck Short <zulcss@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch Description:
Add "Computone IntelliPort Plus serial" hotplug support

patch location:
http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=8c36723187c0fa5efe0e5c6a9b1e66ed4b824792

[akpm@osdl.org: cleanup]
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NChuck Short <zulcss@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* Document the ip command a little differently to make the
  interaction between defaults and autoconfiguration a little clearer
  (I hope)

* Update autoconfiguration the current set of options, including DHCP

* Update the boot methods to add syslinux and isolinux, and remove
  dd of=/dev/fd0 which is no longer supported by linux

* Add a referance to initramfs along side initrd.
  Should the latter and its document be removed some time soon?

* Various cleanups to put the text consistently into the thrid person

* Reformated a bit to fit into 80 columns a bit more nicely

* Should the bootloaders documentation be removed or split
  into a separate documentation, it seems somewhat out of scope
Signed-off-by: NHorms <horms@verge.net.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When write() extends a file(i_size is increased) and fsync() is called,
change of inode must be written to journaling area through fsync().
But,currently the i_trans_id is not correctly updated when i_size is
increased.  So fsync() does not kick the journal writer.

Reiserfs_file_write() already updates the transaction when blocks are
allocated, but the case when i_size increases and new blocks are not added
is not correctly treated.

Following patch fix this bug.
Signed-off-by: NHisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Cc: Hans Reiser <reiser@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce a new rootcontext= option to FS mounting.  This option will allow
you to explicitly label the root inode of an FS being mounted before that
FS or inode because visible to userspace.  This was found to be useful for
things like stateless linux, see
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=190001Signed-off-by: NEric Paris <eparis@parisplace.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the conflict between fscontext and context mount options.  If
context= is specified without fscontext it will operate just as before, if
both are specified we will use mount point labeling and all inodes will get
the label specified by context=.  The superblock will be labeled with the
label of fscontext=, thus affecting operations which check the superblock
security context, such as associate permissions.
Signed-off-by: NEric Paris <eparis@parisplace.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- constify and optimize stat_nam (thanks to Michael Tokarev!)
- spelling and comment fixes
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Problem:

In the function __migrate_task(), deactivate_task() followed by
activate_task() is used to move the task from one run queue to
another.  This has two undesirable effects:

1. The task's priority is recalculated. (Nowhere else in the
scheduler code is the priority recalculated for a change of CPU.)

2. The task's time stamp is set to the current time.  At the very least,
this makes the adjustment of the time stamp before the call to
deactivate_task() redundant but I believe the problem is more serious
as the time stamp now holds the time of the queue change instead of
the time at which the task was woken.  In addition, unless dest_rq is
the same queue as "current" is on the time stamp could be inaccurate
due to inter CPU drift.

Solution:

Replace the call to activate_task() with one to __activate_task().
Signed-off-by: NPeter Williams <pwil3058@bigpond.net.au>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Dopey bug.  Causes hopelessly-wrong numbers from vmstat(8) and several other
counters.

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/x86_64/kernel/e820.c:42: error: 'MAXMEM' undeclared here (not in a function)

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's useful to be able to turn off CONFIG_HOTPLUG for compile-coverage testing
and for section-checking coverage.  But a few things go and select
CONFIG_HOTPLUG, making it a royal PITA to turn the thing off.

It's only turnable offable if CONFIG_EMBEDDED anyway.  So let's make those
things depend on HOTPLUG, not select it.

Cc: Greg KH <greg@kroah.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use thread info flags to track use of debug registers and IO bitmaps.

 - add TIF_DEBUG to track when debug registers are active
 - add TIF_IO_BITMAP to track when I/O bitmap is used
 - modify __switch_to() to use the new TIF flags

Performance tested on Pentium II, ten runs of LMbench context switch
benchmark (smaller is better:)

	before	after
avg	3.65	3.39
min	3.55	3.33
Signed-off-by: NStephane Eranian <eranian@hpl.hp.com>
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* HEAD:
  [AX.25]: Use kzalloc
  [ATM] net/atm/clip.c: fix PROC_FS=n compile
  [PKT_SCHED]: act_api: Fix module leak while flushing actions
  [NET]: Fix IPv4/DECnet routing rule dumping
  [NET] gso: Fix up GSO packets with broken checksums
  [NET] gso: Add skb_is_gso
  [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init()
  [ATM]: fix possible recursive locking in skb_migrate()
  [ATM]: Typo in drivers/atm/Kconfig...
  [TG3]: add amd8131 to "write reorder" chipsets
  [NET]: Fix network device interface printk message priority

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (23 commits)
  [PATCH] 8139too deadlock fix
  [netdrvr] 3c59x: snip changelog from source code
  e1000: increase version to 7.1.9-k2
  e1000: add ich8lan device ID's
  e1000: allow user to disable ich8 lock loss workaround
  e1000: integrate ich8 support into driver
  e1000: add ich8lan core functions
  e1000: disable ERT
  e1000: check return value of _get_speed_and_duplex
  e1000: M88 PHY workaround
  e1000: fix adapter led blinking inconsistency
  e1000: disable CRC stripping workaround
  e1000: force register write flushes to circumvent broken platforms
  e1000: rework module param code with uninitialized values
  e1000: recycle skb
  e1000: change printk into DPRINTK
  e1000: add smart power down code
  e1000: small performance tweak by removing double code
  e1000: fix CONFIG_PM blocks
  e1000: Make PHY powerup/down a function
  ...

* 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Only the first two bits in bio->bi_rw and rq->flags match
  [PATCH] blktrace: readahead support
  [PATCH] blktrace: fix barrier vs sync typo

Replace kzalloc instead of kmalloc + memset.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following compile error with CONFIG_PROC_FS=n by 
reverting commit dcdb0275:

<--  snip  -->

...
  CC      net/atm/clip.o
net/atm/clip.c: In function ‘atm_clip_init’:
net/atm/clip.c:975: error: ‘atm_proc_root’ undeclared (first use in this function)
net/atm/clip.c:975: error: (Each undeclared identifier is reported only once
net/atm/clip.c:975: error: for each function it appears in.)
net/atm/clip.c:977: error: ‘arp_seq_fops’ undeclared (first use in this function)
make[2]: *** [net/atm/clip.o] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Module reference needs to be given back if message header
construction fails.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit a5e1b940.

Adrian Bunk points out that it has build errors, and apparently no
maintenance. Throw it out.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use "+m" rather than a combination of "=m" and "m" for improved clarity
and consistency.

This also fixes some inlines that incorrectly didn't tell the compiler
that they read the old value at all, potentially causing the compiler to
generate bogus code.  It appear that all of those potential bugs were
hidden by the use of extra "volatile" specifiers on the data structures
in question, though.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use "+m" rather than a combination of "=m" and "m" for improved
clarity and consistency.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When more rules are present than fit in a single skb, the remaining
rules are incorrectly skipped.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Certain subsystems in the stack (e.g., netfilter) can break the partial
checksum on GSO packets.  Until they're fixed, this patch allows this to
work by recomputing the partial checksums through the GSO mechanism.

Once they've all been converted to update the partial checksum instead of
clearing it, this workaround can be removed.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the wrapper function skb_is_gso which can be used instead
of directly testing skb_shinfo(skb)->gso_size.  This makes things a little
nicer and allows us to change the primary key for indicating whether an skb
is GSO (if we ever want to do that).
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Coverity checker spotted, that from the changes from commit 
898b1d16 the
       if (ret)
               platform_driver_unregister(&ali_ircc_driver);
was dead code.

This patch changes this function to what seems to have been the 
intention.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ok this is a real potential deadlock in a way, it takes two locks of 2
skbuffs without doing any kind of lock ordering; I think the following
patch should fix it. Just sort the lock taking order by address of the
skb.. it's not pretty but it's the best this can do in a minimally
invasive way.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: NCharles Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the AMD 8131 bridge to the list of chipsets that reorder writes.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The printk's in the network device interface code should all be tagged
with severity.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[ There's some not quite baked bits in cpufreq-git right now
  so sending this on as a patch instead ]

On Thu, 2006-07-06 at 07:58 -0700, Tom London wrote:

> After installing .2356 I get this each time I boot:
> =======================================================
> [ INFO: possible circular locking dependency detected ]
> -------------------------------------------------------
> S06cpuspeed/1620 is trying to acquire lock:
>  (dbs_mutex){--..}, at: [<c060d6bb>] mutex_lock+0x21/0x24
>
> but task is already holding lock:
>  (cpucontrol){--..}, at: [<c060d6bb>] mutex_lock+0x21/0x24
>
> which lock already depends on the new lock.
>

make sure the cpu hotplug recursive mutex (yuck) is taken early in the
cpufreq codepaths to avoid a AB-BA deadlock.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Not three, as assumed. This causes the barrier bit to be needlessly set
for some IO.
Signed-off-by: NJens Axboe <axboe@suse.de>

Provide the needed kernel support for distinguishing readahead
from regular read requests when tracing block devices.
Signed-off-by: NNathan Scott <nathans@sgi.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NNathan Scott <nathans@sgi.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

It's all good.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [PKT_SCHED]: Fix error handling while dumping actions
  [PKT_SCHED]: Return ENOENT if action module is unavailable
  [PKT_SCHED]: Fix illegal memory dereferences when dumping actions

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix stack overflow checking in modular non-SMP kernels.
  [SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.