Per the IBTA spec, QP destroy shall fail if the QP is attached
to multicast groups, although the spec is silent on modify_qp
to reset state. It implies that ULP must deregister QP from
all mcast groups for destroy to succeed.
The faulty patch "IB/ipoib: Update broadcast object if PKey value
was changed in index 0" exposed two issues in rdmavt:
1. Rvt QP reset waits for qp references to go to zero.
This will hang if QP is attached to multicast groups.
2. The mcast group detach will fail for a QP in reset state
therefore preventing ULP from correcting the issue.
This patch moves the reference count wait to the the destroy QP
path and allows a QP mcast detach to work in the reset state.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A destroy of an MR prior to destroying the QP can cause the following
diagnostic if the QP is referencing the MR being de-registered:

hfi1 0000:05:00.0: hfi1_0: rvt_dereg_mr timeout mr ffff8808562108
              00 pd ffff880859b20b00

The solution is to when the a non-zero refcount is encountered when
the MR is destroyed the QPs needs to be iterated looking for QPs in
the same PD as the MR.  If rvt_qp_mr_clean() detects any such QP
references the rkey/lkey, the QP needs to be put into an error state
via a call to rvt_qp_error() which will trigger the clean up of any
stuck references.

This solution is as specified in IBTA 1.3 Volume 1 11.2.10.5.

[This is reproduced with the 0.4.9 version of qperf and the rc_bw test]
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There are currently 3 spots in the qib and hfi1 driver that have
knowledge of the internal QP hash list that should only be in
scope to rdmavt QP code.

Add an iterator API for processing all QPs to hide the
nature of the RCU hashlist.

The API consists of:
- rvt_qp_iter_init()
  * For iterating QPs one at a time for seq_file semantics
- rvt_qp_iter_next()
  * For iterating QPs one at a time for seq_file semantics
- rvt_qp_iter()
  * For iterating all QPs

The first two are used for things like seq_file prints.

The last is for code that just needs to iterate all QPs
in the system.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

hfi1 and qib were converted in previous patches, do the same for rdmavt.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rvt_check_ah() delegates lid verification to underlying
driver. Underlying driver uses different conditions to
check for dlid depending on whether the device supports
extended LIDs
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The pmtu field doens't have be stored in the QP structure
as it can easily be calculated when needed.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The server side of qperf panics as follows:

[242446.336860] IP: report_bug+0x64/0x10
[242446.341031] PGD 1c0c067
[242446.341032] P4D 1c0c067
[242446.343951] PUD 1c0d063
[242446.346870] PMD 8587ea067
[242446.349788] PTE 800000083e14016
[242446.352901]
[242446.358352] Oops: 0003 [#1] SM
[242446.437919] CPU: 1 PID: 7442 Comm: irq/92-hfi1_0 k Not tainted 4.12.0-mam-asm #1
[242446.446365] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/201
[242446.458397] task: ffff8808392d2b80 task.stack: ffffc9000664000
[242446.465097] RIP: 0010:report_bug+0x64/0x10
[242446.469859] RSP: 0018:ffffc900066439c0 EFLAGS: 0001000
[242446.475784] RAX: ffffffffa06647e4 RBX: ffffffffa06461e1 RCX: 000000000000000
[242446.483840] RDX: 0000000000000907 RSI: ffffffffa0675040 RDI: ffffffffffff740
[242446.491897] RBP: ffffc900066439e0 R08: 0000000000000001 R09: 000000000000025
[242446.499953] R10: ffffffff81a253df R11: 0000000000000133 R12: ffffc90006643b3
[242446.508010] R13: ffffffffa065bbf0 R14: 00000000000001e5 R15: 000000000000000
[242446.516067] FS:  0000000000000000(0000) GS:ffff88085f640000(0000) knlGS:000000000000000
[242446.525191] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003
[242446.531698] CR2: ffffffffa06647ee CR3: 0000000001c09000 CR4: 00000000001406e
[242446.539756] Call Trace
[242446.542582]  fixup_bug+0x2c/0x5
[242446.546277]  do_trap+0x12b/0x18
[242446.549972]  do_error_trap+0x89/0x11
[242446.554171]  ? hfi1_copy_sge+0x271/0x2b0 [hfi1
[242446.559324]  ? ttwu_do_wakeup+0x1e/0x14
[242446.563795]  ? ttwu_do_activate+0x77/0x8
[242446.568363]  do_invalid_op+0x20/0x3
[242446.572448]  invalid_op+0x1e/0x3
[242446.576247] RIP: 0010:hfi1_copy_sge+0x271/0x2b0 [hfi1
[242446.582075] RSP: 0018:ffffc90006643be8 EFLAGS: 0001004
[242446.587999] RAX: 0000000000000000 RBX: ffff88083e0fa240 RCX: 000000000000000
[242446.596058] RDX: 0000000000000000 RSI: ffff880842508000 RDI: ffff88083e0fa24
[242446.604116] RBP: ffffc90006643c28 R08: 0000000000000000 R09: 000000000000000
[242446.612172] R10: ffffc90009473640 R11: 0000000000000133 R12: 000000000000000
[242446.620228] R13: 0000000000000000 R14: 0000000000002000 R15: ffff88084250800
[242446.628293]  ? hfi1_copy_sge+0x1a1/0x2b0 [hfi1
[242446.633449]  hfi1_rc_rcv+0x3da/0x1270 [hfi1
[242446.638312]  ? sc_buffer_alloc+0x113/0x150 [hfi1
[242446.643662]  hfi1_ib_rcv+0x1c9/0x2e0 [hfi1
[242446.648428]  process_receive_ib+0x19a/0x270 [hfi1
[242446.653866]  ? process_rcv_qp_work+0xd2/0x160 [hfi1
[242446.659505]  handle_receive_interrupt_nodma_rtail+0x184/0x2e0 [hfi1
[242446.666693]  ? irq_finalize_oneshot+0x100/0x10
[242446.671846]  receive_context_thread+0x1b/0x140 [hfi1
[242446.677576]  irq_thread_fn+0x1e/0x4
[242446.681659]  irq_thread+0x13c/0x1b
[242446.685646]  ? irq_forced_thread_fn+0x60/0x6
[242446.690604]  kthread+0x112/0x15
[242446.694298]  ? irq_thread_check_affinity+0xe0/0xe
[242446.699738]  ? kthread_park+0x60/0x6
[242446.703919]  ? do_syscall_64+0x67/0x15
[242446.708292]  ret_from_fork+0x25/0x3
[242446.712374] Code: 63 78 04 44 0f b7 70 08 41 89 d0 4c 8d 2c 38 41 83 e0 01 f6 c2 02 74 17 66 45 85 c0 74 11 f6 c2 04 b9 01 00 00 00 75 bb 83 ca 04 <66> 89 50 0a 66 45 85 c0 74 52 0f b6 48 0b 41 0f b7 f6 4d 89 e0
[242446.733527] RIP: report_bug+0x64/0x100 RSP: ffffc900066439c
[242446.739935] CR2: ffffffffa06647e
[242446.743763] ---[ end trace 0e90a20d0aa494f7 ]--

The root cause is that the qib/hfi1 post receive call to rvt_lkey_ok()
doesn't interpret the new return value from rvt_lkey_ok() properly
leading to an mr reference count underrun.

Additionally, remove an unused argument in rvt_sge_adjacent()
aw well as an unneeded incr local in rvt_post_one_wr().

Fixes: Commit 14fe13fc ("IB/rdmavt: Compress adjacent SGEs in rvt_lkey_ok()")
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause
overflow due to the fact that the input to the function usecs_to_jiffies
is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is
equal to or greater than 30. The consequence is unnecessarily excessive
retry and thus degradation of the system performance.

This patch fixes the problem by limiting the input to 5-bit and calling
usecs_to_jiffies() before multiplying the scaling factor.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The caller to the driver marks GFP_NOIO allocations with help
of memalloc_noio-* calls now. This makes redundant to pass down
to the driver gfp flags, which can be GFP_KERNEL only.

The patch removes the gfp flags argument and updates all driver paths.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Ensure we can't come up with an array size that is bigger than the array
by applying the QPN mask before the divide in the free_qpn function.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The free_qpn() function from the hfi1/qib driver which was the basis for
rdmavt_free_qpn() function was accidentally left in the code. Remove it.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

SGEs that are contiguous needlessly consume driver dependent TX resources.

The lkey validation logic is enhanced to compress the SGE that ends
up in the send wqe when consecutive addresses are detected.

The lkey validation API used to return 1 (success) or 0 (fail).

The return value is now an -errno, 0 (compressed), or 1 (uncompressed).  A
additional argument is added to pass the last SQE for the compression.

Loopback callers always pass a NULL to last_sge since the optimization is
of little benefit in that situation.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The wqe should be read only and in fact the superfluous reset of the
RVT_SEND_RESERVE_USED flag causes an issue where reserved operations
elicit a bad completion to the ULP.

The maintenance of the flag is now entirely within rvt_post_one_wr()
where a reserved operation will set the flag and a non-reserved operation
will insure the operation that is about to be posted has the flag reset.

Fixes: Commit 856cc4c2 ("IB/hfi1: Add the capability for reserved operations")
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RC timeout counter isn't getting incremented.
Increment counter and add the trace for it.

Fixes: 87c23b4ab018 ("IB/rdmavt: Adding timer logic to rdmavt")
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This fix is to get additional debugging information.

The following fields are added:
- wqe
- qpt
- num_sge
- ssn
- pid
- send_flags

These additional fields provide for more focused filtering
and triggering.

The patch also moves the trace to just before the wqe is
posted to get the most accurate information and future proofs
the code to trace all possible reserved opcodes.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The work to create a completion helper moved the translation of send
wqe operations to completion opcodes to rdmvat.

This precludes having driver dependent operations.  Make the translation
driver dependent by doing the translation in the driver prior to the
rvt_qp_swqe_complete() call using restored translation tables.

Fixes: Commit f2dc9cdc ("IB/rdmavt: Add a send completion helper")
Fixes: Commit 0771da5a ("IB/hfi1,IB/qib: Use new send completion helper")
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Rename RVT AETH defines and export in rdma/ib_hdrs.h
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Return usec from an index into ib_rvt_rnr_table.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To move common code across target to rdmavt for code reuse.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add rvt_rc_error() and rvt_comm_est() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rvt_create_qp() creates qp->ip only when a qp creation request comes from
userspace (udata is not NULL).  If we exceed the number of available
queue pairs however, the error path always attempts to put a kref to this
structure.  If the requestor is inside the kernel, this leads to a crash.

We fix this by checking that qp->ip is not NULL before caling kref_put().
Signed-off-by: NJim Foraker <foraker1@llnl.gov>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: NJonathan Toppins <jtoppins@redhat.com>
Acked-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This is for use by client drivers to drive
send completions into a CQ.

A new exported table allows for the mapping
of ib_wr_opcode into a ib_wc_opcode.
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Corrected function name in comment from qib_ to rvt_.
Signed-off-by: NParav Pandit <pandit.parav@gmail.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds lockdep asserts in key code paths for
insuring lock correctness.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add an rvt_qp_init() to initialize specific
common fields as the qp is created or reset.

The routine is shared by the rvt_reset_qp() and
the rvt_create_qp().

The intent is that lock dep assertions will only
appear in the rvt_reset_qp().
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The reset calldown is misplaced.

It should only be called in the code that actually
transitions the QP to reset.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The __must_hold() is sufficent to correct the sparse
context imbalance inside a function.

Per Documentation/sparse.txt:
__must_hold - The specified lock is held on function entry and exit.

Fixes: Commit c0a67f6b ("IB/rdmavt: Annotate rvt_reset_qp()")
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This improves readability and hides the reference count
mechanism from the client drivers.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The unwind logic for creating a user QP has a double vfree
of the non-shared receive queue when handling a "too many qps"
failure.

The code unwinds the mmmap info by decrementing a reference
count which will call rvt_release_mmap_info() which in turn
does the vfree() of the r_rq.wq.  The unwind code then does
the same free.

Fix by guarding the vfree() with the same test that is done
in close and only do the vfree() if qp->ip is NULL.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The use of the specific opcode test is redundant since
all ack entry users correctly manipulate the mr pointer
to selectively trigger the reference clearing.

The overly specific test hinders the use of implementation
specific operations.

The change needs to get rid of the union to insure that
an atomic value is not seen as an MR pointer.
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Hanging has been observed while writing a file over NFSoRDMA. Dmesg on
the server contains messages like these:

[  931.992501] svcrdma: Error -22 posting RDMA_READ
[  952.076879] svcrdma: Error -22 posting RDMA_READ
[  982.154127] svcrdma: Error -22 posting RDMA_READ
[ 1012.235884] svcrdma: Error -22 posting RDMA_READ
[ 1042.319194] svcrdma: Error -22 posting RDMA_READ

Here is why:

With the base memory management extension enabled, FRMR is used instead
of FMR. The xprtrdma server issues each RDMA read request as the following
bundle:

(1)IB_WR_REG_MR, signaled;
(2)IB_WR_RDMA_READ, signaled;
(3)IB_WR_LOCAL_INV, signaled & fencing.

These requests are signaled. In order to generate completion, the fast
register work request is processed by the hfi1 send engine after being
posted to the work queue, and the corresponding lkey is not valid until
the request is processed. However, the rdmavt driver validates lkey when
the RDMA read request is posted and thus it fails immediately with error
-EINVAL (-22).

This patch changes the work flow of local operations (fast register and
local invalidate) so that fast register work requests are always
processed immediately to ensure that the corresponding lkey is valid
when subsequent work requests are posted. Local invalidate requests are
processed immediately if fencing is not required and no previous local
invalidate request is pending.

To allow completion generation for signaled local operations that have
been processed before posting to the work queue, an internal send flag
RVT_SEND_COMPLETION_ONLY is added. The hfi1 send engine checks this flag
and only generates completion for such requests.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This fix allows for support of in-kernel reserved operations
without impacting the ULP user.

The low level driver can register a non-zero value which
will be transparently added to the send queue size and hidden
from the ULP in every respect.

ULP post sends will never see a full queue due to a reserved
post send and reserved operations will never exceed that
registered value.

The s_avail will continue to track the ULP swqe availability
and the difference between the reserved value and the reserved
in use will track reserved availabity.
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some work requests are local operations, such as IB_WR_REG_MR and
IB_WR_LOCAL_INV. They differ from non-local operations in that:

(1) Local operations can be processed immediately without being posted
to the send queue if neither fencing nor completion generation is needed.
However, to ensure correct ordering, once a local operation is posted to
the work queue due to fencing or completion requiement, all subsequent
local operations must also be posted to the work queue until all the
local operations on the work queue have completed.

(2) Local operations don't send packets over the wire and thus don't
need (and shouldn't update) the packet sequence numbers.

Define a new a flag bit for the post send table to identify local
operations.

Add a new field to the QP structure to track the number of local
operations on the send queue to determine if direct processing of new
local operations should be enabled/disabled.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Change rvt_post_one_wr to use the new table mechanism for
post send.

Validate that each low level driver specifies the table.
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add flexibility for driver dependent operations in post send
because different drivers will have differing post send
operation support.

This includes data structure definitions to support a table
driven scheme along with the necessary validation routine
using the new table.
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The current drivers return errors from this calldown
wrapped in an ERR_PTR().

The rdmavt code incorrectly tests for NULL.

The code is fixed to use IS_ERR() and change ret according
to the driver return value.

Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail
pointers, there is no need to zero out qp->s_ack_queue itself.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Correct calculation of the low order bits which should be unset
based on use of qos_shift parameter when assigning QPN.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch avoids that sparse reports the following warning:

rdmavt/qp.c:507:17: warning: context imbalance in 'rvt_reset_qp' - unexpected unlock
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>