If a resource is already in use, mark it with -EBUSY. Same for cards already
asleep.

(includes a fix for a bug found by Larry Finger -- thanks!)
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This error code meant that trying to change the configuration after the
initialization phase is forbidden.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

CS_BAD_HANDLE means that something went badly wrong: no parameter was passed,
or the paramater passed wasn't the correct one. Therefore, replace it with
-EINVAL.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

It's only used by pcmcia_core when socket-related queries time out.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

It means that no card can be detected in the socket, so return -ENODEV
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

They were either used to report that changing voltage is not allowed, or that
changing voltage failed.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

CS_UNSUPPORTED_MODE and CS_UNSUPPORTED_FUNCTION were mostly used to denote
trying to use PCMCIA functions on CardBus cards.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

CS_OUT_OF_RESOURCE was almost only used to note -ENOMEM situations.
Therefore, use -ENOMEM explicitely, and also print out warnings.

CC: netdev@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Deprecate unused CS_ error codes by replacing their definitions with
generic error messages, and removing them from the error_t lookup table.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Instead of using own error or success codes, the PCMCIA code should rely on
the generic return values. Therefore, replace all occurrences of CS_SUCCESS
with 0.

CC: netdev@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

With the PCMCIA ioctl being the only remaining user of
_get_configuration_info, move the function to pcmcia_ioctl.c
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the three remaining pcmcia_get_configuration_info() users:
- pcmciamtd is marked broken anyway.
- serial_cs.c can access the relevant structs directly
- ipwireless didn't use the output

CC: linux-serial@vger.kernel.org
CC: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

* pcmcia-config-loop:
  pcmcia: pcmcia_config_loop() improvement by passing vcc
  pcmcia: pcmcia_config_loop() default CIS entry handling
  pcmcia: pcmcia_config_loop() ConfigIndex unification
  pcmcia: use pcmcia_loop_config in misc pcmcia drivers
  pcmcia: use pcmcia_loop_config in net pcmcia drivers
  pcmcia: use pcmcia_loop_config in ISDN pcmcia drivers
  pcmcia: use pcmcia_loop_config in scsi pcmcia drivers
  pcmcia: use pcmcia_loop_config in bluetooth drivers
  pcmcia: use pcmcia_loop_config in pata and ide drivers
  pcmcia: add pcmcia_loop_config() helper

* pcmcia-printk:
  pcmcia: don't add extra DEBUG cflag
  pcmcia: remove unused cs_socket_name() definition
  pcmcia: use dev_printk in module rsrc_nonstatic
  pcmcia: use dev_printk in module pcmcia
  pcmcia: use dev_printk in module pcmcia_core
  pcmcia: use dev_printk and dev_dbg in yenta_socket

Use CONFIG_PCMCIA_DEBUG instead of DEBUG so that dev_dbg() and other tricks
work properly.

(includes bugfixes from and
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
)
Signed-off-by: NDominik Broodwski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

(includes bugfix from and
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
)
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

By passing the current Vcc setting to the pcmcia_config_loop callback
function, we can remove pcmcia_get_configuration_info() calls from many
drivers.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in
the pcmcia_config_loop() callback function. Therefore, factor it out.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in misc pcmcia drivers.

CC: Harald Welte <laforge@gnumonks.org>
CC: <linux-parport@lists.infradead.org>
CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Ed Okerson <eokerson@quicknet.net>
CC: linux-serial@vger.kernel.org
CC: boti@rocketmail.com
CC: linux-usb@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in (some) net pcmcia drivers.

CC: netdev@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in ISDN pcmcia drivers.

CC: Karsten Keil <kkeil@suse.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in scsi pcmcia drivers.

CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in bluetooth pcmcia drivers.

CC: Marcel Holtmann <marcel@holtmann.org>
CC: linux-bluetooth@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the config loop helper in pata_pcmcia and ide_cs

CC: Tejun Heo <htejun@gmail.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

By calling pcmcia_loop_config(), a pcmcia driver can iterate over all
available configuration options. During a driver's probe() phase, one
doesn't need to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data
and pcmcia_parse_tuple directly in most if not all cases.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Over time, a few differences have accumulated between pata_pcmcia
and ide-cs. Fix those.

CC: linux-ide@vger.kernel.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Instead of copying CIS override data in socket_sysfs.c or ds.c, and then again
in cistpl.c, only do so once. Also, cisdump_t is now only used by the
deprecated ioctl.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: turn Waker into a thread, not a process
  lguest: Enlarge virtio rings
  lguest: Use GSO/IFF_VNET_HDR extensions on tun/tap
  lguest: Remove 'network: no dma buffer!' warning
  lguest: Adaptive timeout
  lguest: Tell Guest net not to notify us on every packet xmit
  lguest: net block unneeded receive queue update notifications
  lguest: wrap last_avail accesses.
  lguest: use cpu capability accessors
  lguest: virtio-rng support
  lguest: Support assigning a MAC address
  lguest: Don't leak /dev/zero fd
  lguest: fix verbose printing of device features.
  lguest: fix switcher_page leak on unload
  lguest: Guest int3 fix
  lguest: set max_pfn_mapped, growl loudly at Yinghai Lu

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: accept pure device as a parent, not only platform_device
  mfd: add platform_data to mfd_cell
  mfd: Coding style fixes
  mfd: Use to_platform_device instead of container_of

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  x86/PCI: use dev_printk when possible
  PCI: add D3 power state avoidance quirk
  PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot
  PCI: add an option to allow ASPM enabled forcibly
  PCI: disable ASPM on pre-1.1 PCIe devices
  PCI: disable ASPM per ACPI FADT setting
  PCI MSI: Don't disable MSIs if the mask bit isn't supported
  PCI: handle 64-bit resources better on 32-bit machines
  PCI: rewrite PCI BAR reading code
  PCI: document pci_target_state
  PCI hotplug: fix typo in pcie hotplug output
  x86 gart: replace to_pages macro with iommu_num_pages
  x86, AMD IOMMU: replace to_pages macro with iommu_num_pages
  iommu: add iommu_num_pages helper function
  dma-coherent: add documentation to new interfaces
  Cris: convert to using generic dma-coherent mem allocator
  Sh: use generic per-device coherent dma allocator
  ARM: support generic per-device coherent dma mem
  Generic dma-coherent: fix DMA_MEMORY_EXCLUSIVE
  x86: use generic per-device dma coherent allocator
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla2xxx: fix msleep compile error

Alexey Dobriyan reported trouble with LTP with the new fast-gup code,
and Johannes Weiner debugged it to non-page-aligned addresses, where the
new get_user_pages_fast() code would do all the wrong things, including
just traversing past the end of the requested area due to 'addr' never
matching 'end' exactly.

This is not a pretty fix, and we may actually want to move the alignment
into generic code, leaving just the core code per-arch, but Alexey
verified that the vmsplice01 LTP test doesn't crash with this.
Reported-and-tested-by: NAlexey Dobriyan <adobriyan@gmail.com>
Debugged-by: NJohannes Weiner <hannes@saeurebad.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lguest uses a Waker process to break it out of the kernel (ie.
actually running the guest) when file descriptor needs attention.

Changing this from a process to a thread somewhat simplifies things:
it can directly access the fd_set of things to watch.  More
importantly, it means that the Waker can see Guest memory correctly,
so /dev/vring file descriptors will work as anticipated (the
alternative is to actually mmap MAP_SHARED, but you can't do that with
/dev/zero).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

With big packets, 128 entries is a little small.

Guest -> Host 1GB TCP:
Before: 8.43625 seconds xmit 95640 recv 198266 timeout 49771 usec 1252
After: 8.01099 seconds xmit 49200 recv 102263 timeout 26014 usec 2118
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>