Suggested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Those configs are not new:

  $ cat .config
  ...
  CONFIG_NAMESPACES=y
  ...
  CONFIG_BLOCK=y
  ...

But are tagged as NEW:

  $ yes "" | make config > myconf
  $ cat myconf | grep '(NEW)'
  Namespaces support (NAMESPACES) [Y/?] (NEW) y
  ...
  Enable the block layer (BLOCK) [Y/?] (NEW) y
  ...

You can also notice this bug when using gconfig/xconfig.

It's because the SYMBOL_DEF_USER bit of an invisible symbol is cleared
when the config file is read:

int conf_read(const char *name)
{
	...
	for_all_symbols(i, sym) {
		if (sym_has_value(sym) && !sym_is_choice_value(sym)) {
			/* Reset values of generates values, so they'll appear
			 * as new, if they should become visible, but that
			 * doesn't quite work if the Kconfig and the saved
			 * configuration disagree.
			 */
			if (sym->visible == no && !conf_unsaved)
				sym->flags &= ~SYMBOL_DEF_USER;
	...
}

But a menu item which represents an invisible symbol is still
visible, if it's sub-menu is visible, so its SYMBOL_DEF_USER
bit should be set to indicate it's not NEW.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Without this patch, one has to refer to the Kconfig file to find
out the range of an integer/hex symbol.

  │ Symbol: NR_CPUS [=4]
  │ Type  : integer
  │ Range : [2 8]
  │ Prompt: Maximum number of CPUs
  │   Defined at arch/x86/Kconfig:761
  │   Depends on: SMP [=y] && !MAXSMP [=n]
  │   Location:
  │     -> Processor type and features
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Randy suggested to print out the symbol type in gconfig.

Note this change does more than Randy's suggestion, that it also
affects menuconfig and "make config".

  │ Symbol: BLOCK [=y]
  │ Type  : boolean
  │ Prompt: Enable the block layer
  │   Defined at block/Kconfig:4
  │   Depends on: EMBEDDED [=n]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This patch has been around for a long time in Fedora and Red Hat Enterprise
Linux kernels and it may be useful for others. The nonint_oldconfig target
will fail and print the unset config options while loose_nonint_oldconfig will
simply let the config option unset. They're useful in distro kernel packages
where the config files are built using a combination of smaller config files.

Arjan van de Ven wrote the initial nonint_config and Roland McGrath added the
loose_nonint_oldconfig.

Signed-off-by: Arjan van de Ven <arjan@redhat.com> [defunct email]
Whatevered-by: NKyle McMartin <kyle@redhat.com>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAristeu Rozanski <aris@redhat.com>
[mmarek: whitespace fixes]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

There's a button in gconfig to "Show all options", but I think
normally we are not interested in those configs which have no
prompt and thus can't be changed, so here I add a new button to
show hidden options which have prompts.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Usage:
  Press <Z> to show all config symbols which have prompts.

Quote Tim Bird:

| I've been bitten by this numerous times.  I most often
| use ftrace on ARM, but when I go back to x86, I almost
| always go through a sequence of searching for the
| function graph tracer in the menus, then realizing it's
| completely missing until I disable CC_OPTIMIZE_FOR_SIZE.
|
| Is there any way to have the menu item appear, but be
| unsettable unless the SIZE option is disabled?  I'm
| not a Kconfig guru...

I myself found this useful too. For example, I need to test
ftrace/tracing and want to be sure all the tracing features are
enabled, so I  enter the "Tracers" menu, and press <Z> to
see if there is any config hidden.

I also noticed gconfig and xconfig have a button "Show all options",
but that's a bit too much, and I think normally what we are not
interested in those configs which have no prompt thus can't be
changed by users.

Exmaple:

      --- Tracers
      -*-   Kernel Function Tracer
      - -     Kernel Function Graph Tracer
      [*]   Interrupts-off Latency Tracer
      - -   Preemption-off Latency Tracer
      [*]   Sysprof Tracer

Here you can see 2 tracers are not selectable, and then can find
out how to make them selectable.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This option is a no-op, so remove it.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Just use sym_get_type() and prop_get_type_name().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

zconfdump(), which is used for debugging, can't recognize P_SELECT,
P_RANGE and P_MENU (if associated with a symbol, aka "menuconfig"),
and output something like this:

config X86
  boolean
  default y
  unknown prop 6!
  unknown prop 6!
  unknown prop 6!
  ...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

- fix a typo in documentation
- fix a typo in a printk on error
- fix comments in dialog_inputbox()
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

A symbol's value won't be recalc-ed until we save config file or
enter the menu where the symbol sits.

So If I enable OPTIMIZE_FOR_SIZE, and search FUNCTION_GRAPH_TRACER:

  Symbol: FUNCTION_GRAPH_TRACER [=y]
  Prompt: Kernel Function Graph Tracer
    Defined at kernel/trace/Kconfig:140
    Depends on: ... [=y] && (!X86_32 [=y] || !CC_OPTIMIZE_FOR_SIZE [=y])
    ...

From the dependency it should result in FUNCTION_GRAPH_TRACER=n,
but it still shows FUNCTION_GRAPH_TRACER=y.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

While looking for something else I noticed that the symbol
hash function used by kconfig is quite poor. It doesn't
use any of the standard hash techniques but simply
adds up the string and then uses power of two masking,
which is both known to perform poorly.

The current x86 kconfig has over 7000 symbols.

When I instrumented it showed that the minimum hash chain
length was 16 and a significant number of them was over
30.

It didn't help that the hash table size was only 256 buckets.

This patch increases the hash table size to a larger prime
and switches to a FNV32 hash. I played around with a couple of hash
functions, but that one seemed to perform best with reasonable
hash table sizes.

Increasing the hash table size even further didn't
seem like a good idea, because there are a couple of global
walks which walk the complete hash table.

I also moved the unnamed bucket to 0. It's still the longest
of all the buckets (44 entries), but hopefully it's not
often hit except for the global walk which doesn't care.

The result is a much nicer distribution:
(first column bucket length, second number of buckets with that length)

1: 3505
2: 1236
3: 294
4: 52
5: 3
47: 1		<--- this is the unnamed symbols bucket

There are still some 5+ buckets, but increasing the hash table
even more would be likely not worth it.

This also cleans up the code slightly by removing hard coded
magic numbers.

I didn't notice a big performance difference either way
on my Nehalem system, but I presume it'll help somewhat
on slower systems.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This patch fixes two problems reported by Jan Engelhardt:
1) Border is now properly placed, to always be visible
2) Long menu items are properly displayed
Reported-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NNir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

scripts/kconfig/nconf.gui.c:23: warning: no previous prototype for 'set_normal_colors'
scripts/kconfig/nconf.gui.c:68: warning: no previous prototype for 'normal_color_theme'
scripts/kconfig/nconf.gui.c:100: warning: no previous prototype for 'no_colors_theme'
scripts/kconfig/nconf.c:455: warning: no previous prototype for 'process_special_keys'
scripts/kconfig/nconf.c:487: warning: no previous prototype for 'get_next_hot'
scripts/kconfig/nconf.c:506: warning: no previous prototype for 'canbhot'
scripts/kconfig/nconf.c:514: warning: no previous prototype for 'is_hot'
scripts/kconfig/nconf.c:522: warning: no previous prototype for 'make_hot'
scripts/kconfig/nconf.c:582: warning: no previous prototype for 'item_make'
scripts/kconfig/nconf.c:626: warning: no previous prototype for 'item_add_str'
scripts/kconfig/nconf.c:656: warning: no previous prototype for 'item_tag'
scripts/kconfig/nconf.c:668: warning: no previous prototype for 'curses_item_index'
scripts/kconfig/nconf.c:673: warning: no previous prototype for 'item_data'
scripts/kconfig/nconf.c:684: warning: no previous prototype for 'item_is_tag'
scripts/kconfig/nconf.c:691: warning: no previous prototype for 'set_config_filename'
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This patch was inspired by the kernel projects page, where an ncurses
replacement for menuconfig was mentioned (by Sam Ravnborg).

Building on menuconfig, this patch implements a more modern look
interface using ncurses and ncurses' satellite libraries (menu, panel,
form). The implementation does not depend on lxdialog, which is
currently distributed with the kernel.
Signed-off-by: NNir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Help text for certain config options is very extensive (the text
includes the names of all  other options the option in question depends
on). Long lines are not wrapped, making it impossible to see the list
without scrolling horizontally.

This patch adds some logic which wraps help screen lines at word
boundaries to prevent truncating.

Tested by running

  ARCH=powerpc make menuconfig O=/tmp/build

which shows that the long lines are now wrapped, and

 ARCH=powerpc make xconfig O=/tmp/build

to demonstrate that it still compiles and operates as expected.
Signed-off-by: NVadim Bendebury <vbendeb@google.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The toplevel Makefile creates the directory if it runs silentoldconfig
automatically, but if run manually, it fails:

  $ make mrproper
  $ make defconfig && make silentoldconfig
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  scripts/kconfig/conf -s arch/x86/Kconfig

  *** Error during update of the kernel configuration.
  ...

Move the mkdir command to the silentoldconfig target to make it work.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When the output directory is something other than the kernel source,
the streamline_config script gets confused. This patch passes in the
source directory to the script so that it can find the proper files.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Tested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

kconfig's keyword hash, lexer, and parser define various functions used
only locally.  Declare these functions as static, and regenerate the
corresponding generated files.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

zconf.y includes zconf.hash.c from the initial code section.
zconf.hash.c references the token constants from zconf.y.  However,
current bison defines the token constants after the initial code
section, making zconf.hash.c fail to compile.  Move the include of
zconf.hash.c later in zconf.y, so bison puts it after the token
constants.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

Warnings found via gcc -Wmissing-prototypes.
Signed-off-by: NTrevor Keith <tsrk@tsrk.net>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When typeahead find is enabled, using 'y', 'n' and 'm' to change the status
of the configuration items will also start up the search system, making you
jump around the configuration.

Disabling the enable_search property does not mean that search is not
possible, it only disables the typeahead; to execute a search in the
treeview, you can just call it up explicitly (i.e.: on most systems that
will be Ctrl-f).
Signed-off-by: NDiego Elio 'Flameeyes' Pettenò  <flameeyes@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Futhermore, gconfig interface lack the "search a symbol" function, do later.
Signed-off-by: NCheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
[sam: fix SEGV in gconfig]
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NCheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NCheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The removed functions are moved into menu.c for sharing with
gconfig & xconfig & config.
Signed-off-by: NCheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The three functions are moved from mconf.c, then they can be shared in
all menuconfig & gconfig & xconfig & config.

  +void menu_get_ext_help(struct menu *menu, struct gstr *help)
  +static void get_prompt_str(struct gstr *r, struct property *prop)
  +void get_symbol_str(struct gstr *r, struct symbol *sym)
Signed-off-by: NCheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Sometimes when configuring need to disable some unused item, but the item is
selected by many other items, it's hard to find the real dependency which
selected it, This patch add every symbol's value accompanied to make it
possible to find the real dependency easily.

An example is CONFIG_RFKILL,

  ---------------------- RF switch subsystem support ----------------------
  | CONFIG_RFKILL:                                                        |
  |                                                                       |
  | Say Y here if you want to have control over RF switches               |
  | found on many WiFi and Bluetooth cards.                               |
  |                                                                       |
  | To compile this driver as a module, choose M here: the                |
  | module will be called rfkill.                                         |
  |                                                                       |
  | Symbol: RFKILL [=m]                                                   |
  | Prompt: RF switch subsystem support                                   |
  |   Defined at net/rfkill/Kconfig:4                                     |
  |   Depends on: NET [=y]                                                |
  |   Location:                                                           |
  |     -> Networking support (NET [=y])                                  |
  |   Selected by: IWLCORE [=n] && NETDEVICES [=y] && !S390 [=S390] && PC |
  |                                                                       |
  ----------------------------------------------------------------( 99%)---
Signed-off-by: NCheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

There's a dependency missing.

$ make localyesconfig
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/basic/docproc
  HOSTCC  scripts/basic/hash
using config: '/boot/config-2.6.27.25-78.2.56.fc9.x86_64'
/bin/sh: line 8: scripts/kconfig/conf: No such file or directory
make[1]: *** [localyesconfig] Error 127
make: *** [localyesconfig] Error 2

Thus the script failed to run. But the sed command that converts the '=m'
to '=y' still ran. This gives us a distro config with all modules
converted to built in!

The missing dependency was for conf for localyesconfig. This
dependency was already set for localmodconfig.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If one were to run localmodconfig or localyesconfig without having
a .config already in the file, then the end of the process would give
a warning when it tries to move the old .config to .config.old.

This patch adds a test to check if .config exists and avoid the moves
if it does not.

[ Impact: remove warning after make localmodconfig ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As Andi Kleen pointed out, most people would expect that the local .config
file to be based for a streamline config. This patch changes the order
of searching for a config file to consider the .config in the local
directory first.
Reported-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Many distros put their config in /boot/config-`uname -r`, add a check
for that right after /proc/config.gz
Reported-by: NAlan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Due to cut and paste error IKCONFIG was both set and cleared.
It was suppose to be IKCONFIG_PROC to be cleared.

Also cleaned up if nesting.
Reported-by: NAlan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Instead of using the .config in the local directory. This patch
changes streamline_config.pl to search various locations for a config.

Here's the list and order of search:

  /proc/config.gz
  /boot/vmlinuz-`uname -r`
  vmlinux  # local to the directory
  /lib/modules/`uname -r`/kernel/kernel/configs.ko
  kernel/configs.ko
  kernel/configs.o
  .config

Once it finds a file that contains a config (it checks if the binary
objects have configs first) it then uses it to create the .config
with minimum modules needed.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Ingo Molnar suggested that the streamline_config.pl should enable
CONFIG_IKCONFIG to keep the current config in the kernel.
Then we can use scripts/extract-ikconfig to find the current
modules.

This patch changes streamline_config.pl to check if CONFIG_IKCONFIG
is not set, and if it is not, it enables it to be a module.

[ Impact: make current config options easier to find ]
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The streamline_config.pl finds all the configs that are needed to
compile the currently loaded modules. After it creates the .config
file, it tests to make sure all the configs that are needed were
set.

It only looks at the configs that are modules, it does not look
at the builtin configs. This causes unnecessary warnings about modules
not being covered.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>