attribute_group are not supposed to change at runtime.  All functions
working with attribute_group provided by <linux/sysfs.h> work with const
attribute_group.  So mark the non-const structs as const.

Link: http://lkml.kernel.org/r/1501157167-3706-2-git-send-email-arvind.yadav.cs@gmail.comSigned-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit fa06235b ("cgroup: reset css on destruction") caused
css_reset callback to be called from the offlining path.  Although it
solves the problem mentioned in the commit description ("For instance,
memory cgroup needs to reset memory.low, otherwise pages charged to a
dead cgroup might never get reclaimed."), generally speaking, it's not
correct.

An offline cgroup can still be a resource domain, and we shouldn't grant
it more resources than it had before deletion.

For instance, if an offline memory cgroup has dirty pages, we should
still imply i/o limits during writeback.

The css_reset callback is designed to return the cgroup state into the
original state, that means reset all limits and counters.  It's
spomething different from the offlining, and we shouldn't use it from
the offlining path.  Instead, we should adjust necessary settings from
the per-controller css_offline callbacks (e.g.  reset memory.low).

Link: http://lkml.kernel.org/r/20170727130428.28856-2-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A removed memory cgroup with a defined memory.low and some belonging
pagecache has very low chances to be freed.

If a cgroup has been removed, there is likely no memory pressure inside
the cgroup, and the pagecache is protected from the external pressure by
the defined low limit.  The cgroup will be freed only after the reclaim
of all belonging pages.  And it will not happen until there are any
reclaimable memory in the system.  That means, there is a good chance,
that a cold pagecache will reside in the memory for an undefined amount
of time, wasting system resources.

This problem was fixed earlier by fa06235b ("cgroup: reset css on
destruction"), but it's not a best way to do it, as we can't really
reset all limits/counters during cgroup offlining.

Link: http://lkml.kernel.org/r/20170727130428.28856-1-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All users of pagevec_lookup() and pagevec_lookup_range() now pass
PAGEVEC_SIZE as a desired number of pages.

Just drop the argument.

Link: http://lkml.kernel.org/r/20170726114704.7626-11-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in filemap_range_has_page(),
furthermore we want at most a single page.

So use find_get_pages_range() instead of pagevec_lookup() and remove
unnecessary code.

Link: http://lkml.kernel.org/r/20170726114704.7626-10-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in page_cache_seek_hole_data().  Use
pagevec_lookup_range() instead of pagevec_lookup() and remove
unnecessary code.

Note that the check for getting less pages than desired can be removed
because index gets updated by pagevec_lookup_range().

Link: http://lkml.kernel.org/r/20170726114704.7626-9-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want only pages from given range in remove_inode_hugepages().  Use
pagevec_lookup_range() instead of pagevec_lookup().

Link: http://lkml.kernel.org/r/20170726114704.7626-8-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both occurences of pagevec_lookup() actually want only pages from a
given range.  Use pagevec_lookup_range() for the lookup.

Link: http://lkml.kernel.org/r/20170726114704.7626-7-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use pagevec_lookup_range() in ext4_find_unwritten_pgoff() since we are
interested only in pages in the given range.  Simplify the logic as a
result of not getting pages out of range and index getting automatically
advanced.

Link: http://lkml.kernel.org/r/20170726114704.7626-6-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit e64855c6 ("fs: Add helper to clean bdev aliases under a bh
and use it") added a wrapper for clean_bdev_aliases() that invalidates
bdev aliases underlying a single buffer head.

However this has caused a performance regression for bonnie++ benchmark
on ext4 filesystem when delayed allocation is turned off (ext3 mode) -
average of 3 runs:

  Hmean SeqOut Char  164787.55 (  0.00%) 107189.06 (-34.95%)
  Hmean SeqOut Block 219883.89 (  0.00%) 168870.32 (-23.20%)

The reason for this regression is that clean_bdev_aliases() is slower
when called for a single block because pagevec_lookup() it uses will end
up iterating through the radix tree until it finds a page (which may
take a while) but we are only interested whether there's a page at a
particular index.

Fix the problem by using pagevec_lookup_range() instead which avoids the
needless iteration.

Fixes: e64855c6 ("fs: Add helper to clean bdev aliases under a bh and use it")
Link: http://lkml.kernel.org/r/20170726114704.7626-5-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement a variant of find_get_pages() that stops iterating at given
index.  This may be substantial performance gain if the mapping is
sparse.  See following commit for details.  Furthermore lots of users of
this function (through pagevec_lookup()) actually want a range lookup
and all of them are currently open-coding this.

Also create corresponding pagevec_lookup_range() function.

Link: http://lkml.kernel.org/r/20170726114704.7626-4-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make pagevec_lookup() (and underlying find_get_pages()) update index to
the next page where iteration should continue.  Most callers want this
and also pagevec_lookup_tag() already does this.

Link: http://lkml.kernel.org/r/20170726114704.7626-3-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "Ranged pagevec lookup", v2.

In this series I make pagevec_lookup() update the index (to be
consistent with pagevec_lookup_tag() and also as a preparation for
ranged lookups), provide ranged variant of pagevec_lookup() and use it
in places where it makes sense.  This not only removes some common code
but is also a measurable performance win for some use cases (see patch
4/10) where radix tree is sparse and searching & grabing of a page after
the end of the range has measurable overhead.

This patch (of 10):

The callback doesn't ever get called.  Remove it.

Link: http://lkml.kernel.org/r/20170726114704.7626-2-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tetsuo Handa has reported[1][2][3] that direct reclaimers might get
stuck in too_many_isolated loop basically for ever because the last few
pages on the LRU lists are isolated by the kswapd which is stuck on fs
locks when doing the pageout or slab reclaim.  This in turn means that
there is nobody to actually trigger the oom killer and the system is
basically unusable.

too_many_isolated has been introduced by commit 35cd7815 ("vmscan:
throttle direct reclaim when too many pages are isolated already") to
prevent from pre-mature oom killer invocations because back then no
reclaim progress could indeed trigger the OOM killer too early.

But since the oom detection rework in commit 0a0337e0 ("mm, oom:
rework oom detection") the allocation/reclaim retry loop considers all
the reclaimable pages and throttles the allocation at that layer so we
can loosen the direct reclaim throttling.

Make shrink_inactive_list loop over too_many_isolated bounded and
returns immediately when the situation hasn't resolved after the first
sleep.

Replace congestion_wait by a simple schedule_timeout_interruptible
because we are not really waiting on the IO congestion in this path.

Please note that this patch can theoretically cause the OOM killer to
trigger earlier while there are many pages isolated for the reclaim
which makes progress only very slowly.  This would be obvious from the
oom report as the number of isolated pages are printed there.  If we
ever hit this should_reclaim_retry should consider those numbers in the
evaluation in one way or another.

[1] http://lkml.kernel.org/r/201602092349.ACG81273.OSVtMJQHLOFOFF@I-love.SAKURA.ne.jp
[2] http://lkml.kernel.org/r/201702212335.DJB30777.JOFMHSFtVLQOOF@I-love.SAKURA.ne.jp
[3] http://lkml.kernel.org/r/201706300914.CEH95859.FMQOLVFHJFtOOS@I-love.SAKURA.ne.jp

[mhocko@suse.com: switch to uninterruptible sleep]
  Link: http://lkml.kernel.org/r/20170724065048.GB25221@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170710074842.23175-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Getting -EBUSY from zs_page_migrate will make migration slow (retry) or
fail (zs_page_putback will schedule_work free_work, but it cannot ensure
the success).

I noticed this issue because my Kernel patched
(https://lkml.org/lkml/2014/5/28/113) that will remove retry in
__alloc_contig_migrate_range.

This retry will handle the -EBUSY because it will re-isolate the page
and re-call migrate_pages.  Without it will make cma_alloc fail at once
with -EBUSY.

According to the review from Minchan Kim in
https://lkml.org/lkml/2014/5/28/113, I update the patch to skip
unnecessary loops but not return -EBUSY if zspage is not inuse.

Following is what I got with highalloc-performance in a vbox with 2 cpu
1G memory 512 zram as swap.  And the swappiness is set to 100.

                                   ori          ne
                                  orig         new
Minor Faults                  50805113    50830235
Major Faults                     43918       56530
Swap Ins                         42087       55680
Swap Outs                        89718      104700
Allocation stalls                    0           0
DMA allocs                       57787       52364
DMA32 allocs                  47964599    48043563
Normal allocs                        0           0
Movable allocs                       0           0
Direct pages scanned             45493       23167
Kswapd pages scanned           1565222     1725078
Kswapd pages reclaimed         1342222     1503037
Direct pages reclaimed           45615       25186
Kswapd efficiency                  85%         87%
Kswapd velocity               1897.101    1949.042
Direct efficiency                 100%        108%
Direct velocity                 55.139      26.175
Percentage direct scans             2%          1%
Zone normal velocity          1952.240    1975.217
Zone dma32 velocity              0.000       0.000
Zone dma velocity                0.000       0.000
Page writes by reclaim       89764.000  105233.000
Page writes file                    46         533
Page writes anon                 89718      104700
Page reclaim immediate           21457        3699
Sector Reads                   3259688     3441368
Sector Writes                  3667252     3754836
Page rescued immediate               0           0
Slabs scanned                  1042872     1160855
Direct inode steals               8042       10089
Kswapd inode steals              54295       29170
Kswapd skipped wait                  0           0
THP fault alloc                    175         154
THP collapse alloc                 226         289
THP splits                           0           0
THP fault fallback                  11          14
THP collapse fail                    3           2
Compaction stalls                  536         646
Compaction success                 322         358
Compaction failures                214         288
Page migrate success            119608      111063
Page migrate failure              2723        2593
Compaction pages isolated       250179      232652
Compaction migrate scanned     9131832     9942306
Compaction free scanned        2093272     2613998
Compaction cost                    192         189
NUMA alloc hit                47124555    47193990
NUMA alloc miss                      0           0
NUMA interleave hit                  0           0
NUMA alloc local              47124555    47193990
NUMA base PTE updates                0           0
NUMA huge PMD updates                0           0
NUMA page range updates              0           0
NUMA hint faults                     0           0
NUMA hint local faults               0           0
NUMA hint local percent            100         100
NUMA pages migrated                  0           0
AutoNUMA cost                       0%          0%

[akpm@linux-foundation.org: remove newline, per Minchan]
Link: http://lkml.kernel.org/r/1500889535-19648-1-git-send-email-zhuhui@xiaomi.comSigned-off-by: NHui Zhu <zhuhui@xiaomi.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Nadav Amit report zap_page_range only specifies that the caller protect
the VMA list but does not specify whether it is held for read or write
with callers using either.  madvise holds mmap_sem for read meaning that
a parallel zap operation can unmap PTEs which are then potentially
skipped by madvise which potentially returns with stale TLB entries
present.  While the API could be extended, it would be a difficult API
to use.  This patch causes zap_page_range() to always consider flushing
the full affected range.  For small ranges or sparsely populated
mappings, this may result in one additional spurious TLB flush.  For
larger ranges, it is possible that the TLB has already been flushed and
the overhead is negligible.  Either way, this approach is safer overall
and avoids stale entries being present when madvise returns.

This can be illustrated with the following program provided by Nadav
Amit and slightly modified.  With the patch applied, it has an exit code
of 0 indicating a stale TLB entry did not leak to userspace.

---8<---

volatile int sync_step = 0;
volatile char *p;

static inline unsigned long rdtsc()
{
	unsigned long hi, lo;
	__asm__ __volatile__ ("rdtsc" : "=a"(lo), "=d"(hi));
	 return lo | (hi << 32);
}

static inline void wait_rdtsc(unsigned long cycles)
{
	unsigned long tsc = rdtsc();

	while (rdtsc() - tsc < cycles);
}

void *big_madvise_thread(void *ign)
{
	sync_step = 1;
	while (sync_step != 2);
	madvise((void*)p, PAGE_SIZE * N_PAGES, MADV_DONTNEED);
}

int main(void)
{
	pthread_t aux_thread;

	p = mmap(0, PAGE_SIZE * N_PAGES, PROT_READ|PROT_WRITE,
		 MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);

	memset((void*)p, 8, PAGE_SIZE * N_PAGES);

	pthread_create(&aux_thread, NULL, big_madvise_thread, NULL);
	while (sync_step != 1);

	*p = 8;		// Cache in TLB
	sync_step = 2;
	wait_rdtsc(100000);
	madvise((void*)p, PAGE_SIZE, MADV_DONTNEED);
	printf("data: %d (%s)\n", *p, (*p == 8 ? "stale, broken" : "cleared, fine"));
	return *p == 8 ? -1 : 0;
}
---8<---

Link: http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.netSigned-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NNadav Amit <nadav.amit@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When walking the page tables to resolve an address that points to
!p*d_present() entry, huge_pte_offset() returns inconsistent values
depending on the level of page table (PUD or PMD).

It returns NULL in the case of a PUD entry while in the case of a PMD
entry, it returns a pointer to the page table entry.

A similar inconsitency exists when handling swap entries - returns NULL
for a PUD entry while a pointer to the pte_t is retured for the PMD
entry.

Update huge_pte_offset() to make the behaviour consistent - return a
pointer to the pte_t for hugepage or swap entries.  Only return NULL in
instances where we have a p*d_none() entry and the size parameter
doesn't match the hugepage size at this level of the page table.

Document the behaviour to clarify the expected behaviour of this
function.  This is to set clear semantics for architecture specific
implementations of huge_pte_offset().

Discussions on the arm64 implementation of huge_pte_offset()
(http://www.spinics.net/lists/linux-mm/msg133699.html) showed that there
is benefit from returning a pte_t* in the case of p*d_none().

The fault handling code in hugetlb_fault() can handle p*d_none() entries
and saves an extra round trip to huge_pte_alloc().  Other callers of
huge_pte_offset() should be ok as well.

[punit.agrawal@arm.com: v2]
Link: http://lkml.kernel.org/r/20170725154114.24131-2-punit.agrawal@arm.comSigned-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These functions are the only bits of generic code that use
{pud,pmd}_pfn() without checking for CONFIG_TRANSPARENT_HUGEPAGE.  This
works fine on x86, the only arch with devmap support, since the *_pfn()
functions are always defined there, but this isn't true for every
architecture.

Link: http://lkml.kernel.org/r/20170626063833.11094-1-oohall@gmail.comSigned-off-by: NOliver O'Halloran <oohall@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mremap will attempt to create a 'duplicate' mapping if old_size == 0 is
specified.  In the case of private mappings, mremap will actually create
a fresh separate private mapping unrelated to the original.  This does
not fit with the design semantics of mremap as the intention is to
create a new mapping based on the original.

Therefore, return EINVAL in the case where an attempt is made to
duplicate a private mapping.  Also, print a warning message (once) if
such an attempt is made.

Link: http://lkml.kernel.org/r/cb9d9f6a-7095-582f-15a5-62643d65c736@oracle.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

init_pages_in_zone() is run under zone->lock, which means a long lock
time and disabled interrupts on large machines.  This is currently not
an issue since it runs early in boot, but a later patch will change
that.

However, like other pfn scanners, we don't actually need zone->lock even
when other cpus are running.  The only potentially dangerous operation
here is reading bogus buddy page owner due to race, and we already know
how to handle that.  The worst that can happen is that we skip some
early allocated pages, which should not affect the debugging power of
page_owner noticeably.

Link: http://lkml.kernel.org/r/20170720134029.25268-4-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

page_ext_init() can take long on large machines, so add a cond_resched()
point after each section is processed.  This will allow moving the init
to a later point at boot without triggering lockup reports.

Link: http://lkml.kernel.org/r/20170720134029.25268-3-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In init_pages_in_zone() we currently use the generic set_page_owner()
function to initialize page_owner info for early allocated pages.  This
means we needlessly do lookup_page_ext() twice for each page, and more
importantly save_stack(), which has to unwind the stack and find the
corresponding stack depot handle.  Because the stack is always the same
for the initialization, unwind it once in init_pages_in_zone() and reuse
the handle.  Also avoid the repeated lookup_page_ext().

This can significantly reduce boot times with page_owner=on on large
machines, especially for kernels built without frame pointer, where the
stack unwinding is noticeably slower.

[vbabka@suse.cz: don't duplicate code of __set_page_owner(), per Michal Hocko]
[akpm@linux-foundation.org: coding-style fixes]
[vbabka@suse.cz: create statically allocated fake stack trace for early allocated pages, per Michal]
  Link: http://lkml.kernel.org/r/45813564-2342-fc8d-d31a-f4b68a724325@suse.cz
Link: http://lkml.kernel.org/r/20170720134029.25268-2-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f52407ce ("memory hotplug: alloc page from other node in
memory online") has introduced N_HIGH_MEMORY checks to only use NUMA
aware allocations when there is some memory present because the
respective node might not have any memory yet at the time and so it
could fail or even OOM.

Things have changed since then though.  Zonelists are now always
initialized before we do any allocations even for hotplug (see
959ecc48 ("mm/memory_hotplug.c: fix building of node hotplug
zonelist")).

Therefore these checks are not really needed.  In fact caller of the
allocator should never care about whether the node is populated because
that might change at any time.

Link: http://lkml.kernel.org/r/20170721143915.14161-10-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zonelists_mutex was introduced by commit 4eaf3f64 ("mem-hotplug: fix
potential race while building zonelist for new populated zone") to
protect zonelist building from races.  This is no longer needed though
because both memory online and offline are fully serialized.  New users
have grown since then.

Notably setup_per_zone_wmarks wants to prevent from races between memory
hotplug, khugepaged setup and manual min_free_kbytes update via sysctl
(see cfd3da1e ("mm: Serialize access to min_free_kbytes").  Let's
add a private lock for that purpose.  This will not prevent from seeing
halfway through memory hotplug operation but that shouldn't be a big
deal becuse memory hotplug will update watermarks explicitly so we will
eventually get a full picture.  The lock just makes sure we won't race
when updating watermarks leading to weird results.

Also __build_all_zonelists manipulates global data so add a private lock
for it as well.  This doesn't seem to be necessary today but it is more
robust to have a lock there.

While we are at it make sure we document that memory online/offline
depends on a full serialization either via mem_hotplug_begin() or
device_lock.

Link: http://lkml.kernel.org/r/20170721143915.14161-9-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

build_all_zonelists has been (ab)using stop_machine to make sure that
zonelists do not change while somebody is looking at them.  This is is
just a gross hack because a) it complicates the context from which we
can call build_all_zonelists (see 3f906ba2 ("mm/memory-hotplug:
switch locking to a percpu rwsem")) and b) is is not really necessary
especially after "mm, page_alloc: simplify zonelist initialization" and
c) it doesn't really provide the protection it claims (see below).

Updates of the zonelists happen very seldom, basically only when a zone
becomes populated during memory online or when it loses all the memory
during offline.  A racing iteration over zonelists could either miss a
zone or try to work on one zone twice.  Both of these are something we
can live with occasionally because there will always be at least one
zone visible so we are not likely to fail allocation too easily for
example.

Please note that the original stop_machine approach doesn't really
provide a better exclusion because the iteration might be interrupted
half way (unless the whole iteration is preempt disabled which is not
the case in most cases) so the some zones could still be seen twice or a
zone missed.

I have run the pathological online/offline of the single memblock in the
movable zone while stressing the same small node with some memory
pressure.

Node 1, zone      DMA
  pages free     0
        min      0
        low      0
        high     0
        spanned  0
        present  0
        managed  0
        protection: (0, 943, 943, 943)
Node 1, zone    DMA32
  pages free     227310
        min      8294
        low      10367
        high     12440
        spanned  262112
        present  262112
        managed  241436
        protection: (0, 0, 0, 0)
Node 1, zone   Normal
  pages free     0
        min      0
        low      0
        high     0
        spanned  0
        present  0
        managed  0
        protection: (0, 0, 0, 1024)
Node 1, zone  Movable
  pages free     32722
        min      85
        low      117
        high     149
        spanned  32768
        present  32768
        managed  32768
        protection: (0, 0, 0, 0)

root@test1:/sys/devices/system/node/node1# while true
do
	echo offline > memory34/state
	echo online_movable > memory34/state
done

root@test1:/mnt/data/test/linux-3.7-rc5# numactl --preferred=1 make -j4

and it survived without any unexpected behavior.  While this is not
really a great testing coverage it should exercise the allocation path
quite a lot.

Link: http://lkml.kernel.org/r/20170721143915.14161-8-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

build_zonelists gradually builds zonelists from the nearest to the most
distant node.  As we do not know how many populated zones we will have
in each node we rely on the _zoneref to terminate initialized part of
the zonelist by a NULL zone.  While this is functionally correct it is
quite suboptimal because we cannot allow updaters to race with zonelists
users because they could see an empty zonelist and fail the allocation
or hit the OOM killer in the worst case.

We can do much better, though.  We can store the node ordering into an
already existing node_order array and then give this array to
build_zonelists_in_node_order and do the whole initialization at once.
zonelists consumers still might see halfway initialized state but that
should be much more tolerateable because the list will not be empty and
they would either see some zone twice or skip over some zone(s) in the
worst case which shouldn't lead to immediate failures.

While at it let's simplify build_zonelists_node which is rather
confusing now.  It gets an index into the zoneref array and returns the
updated index for the next iteration.  Let's rename the function to
build_zonerefs_node to better reflect its purpose and give it zoneref
array to update.  The function doesn't the index anymore.  It just
returns the number of added zones so that the caller can advance the
zonered array start for the next update.

This patch alone doesn't introduce any functional change yet, though, it
is merely a preparatory work for later changes.

Link: http://lkml.kernel.org/r/20170721143915.14161-7-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

try_online_node calls hotadd_new_pgdat which already calls
build_all_zonelists.  So the additional call is redundant.  Even though
hotadd_new_pgdat will only initialize zonelists of the new node this is
the right thing to do because such a node doesn't have any memory so
other zonelists would ignore all the zones from this node anyway.

Link: http://lkml.kernel.org/r/20170721143915.14161-6-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

build_all_zonelists gets a zone parameter to initialize zone's pagesets.
There is only a single user which gives a non-NULL zone parameter and
that one doesn't really need the rest of the build_all_zonelists (see
commit 6dcd73d7 ("memory-hotplug: allocate zone's pcp before
onlining pages")).

Therefore remove setup_zone_pageset from build_all_zonelists and call it
from its only user directly.  This will also remove a pointless zonlists
rebuilding which is always good.

Link: http://lkml.kernel.org/r/20170721143915.14161-5-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__build_all_zonelists reinitializes each online cpu local node for
CONFIG_HAVE_MEMORYLESS_NODES.  This makes sense because previously
memory less nodes could gain some memory during memory hotplug and so
the local node should be changed for CPUs close to such a node.  It
makes less sense to do that unconditionally for a newly creaded NUMA
node which is still offline and without any memory.

Let's also simplify the cpu loop and use for_each_online_cpu instead of
an explicit cpu_online check for all possible cpus.

Link: http://lkml.kernel.org/r/20170721143915.14161-4-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

boot_pageset is a boot time hack which gets superseded by normal
pagesets later in the boot process.  It makes zero sense to reinitialize
it again and again during memory hotplug.

Link: http://lkml.kernel.org/r/20170721143915.14161-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "cleanup zonelists initialization", v1.

This is aimed at cleaning up the zonelists initialization code we have
but the primary motivation was bug report [2] which got resolved but the
usage of stop_machine is just too ugly to live.  Most patches are
straightforward but 3 of them need a special consideration.

Patch 1 removes zone ordered zonelists completely.  I am CCing linux-api
because this is a user visible change.  As I argue in the patch
description I do not think we have a strong usecase for it these days.
I have kept sysctl in place and warn into the log if somebody tries to
configure zone lists ordering.  If somebody has a real usecase for it we
can revert this patch but I do not expect anybody will actually notice
runtime differences.  This patch is not strictly needed for the rest but
it made patch 6 easier to implement.

Patch 7 removes stop_machine from build_all_zonelists without adding any
special synchronization between iterators and updater which I _believe_
is acceptable as explained in the changelog.  I hope I am not missing
anything.

Patch 8 then removes zonelists_mutex which is kind of ugly as well and
not really needed AFAICS but a care should be taken when double checking
my thinking.

This patch (of 9):

Supporting zone ordered zonelists costs us just a lot of code while the
usefulness is arguable if existent at all.  Mel has already made node
ordering default on 64b systems.  32b systems are still using
ZONELIST_ORDER_ZONE because it is considered better to fallback to a
different NUMA node rather than consume precious lowmem zones.

This argument is, however, weaken by the fact that the memory reclaim
has been reworked to be node rather than zone oriented.  This means that
lowmem requests have to skip over all highmem pages on LRUs already and
so zone ordering doesn't save the reclaim time much.  So the only
advantage of the zone ordering is under a light memory pressure when
highmem requests do not ever hit into lowmem zones and the lowmem
pressure doesn't need to reclaim.

Considering that 32b NUMA systems are rather suboptimal already and it
is generally advisable to use 64b kernel on such a HW I believe we
should rather care about the code maintainability and just get rid of
ZONELIST_ORDER_ZONE altogether.  Keep systcl in place and warn if
somebody tries to set zone ordering either from kernel command line or
the sysctl.

[mhocko@suse.com: reading vm.numa_zonelist_order will never terminate]
Link: http://lkml.kernel.org/r/20170721143915.14161-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds document and kconfig for using of writeback feature.

Link: http://lkml.kernel.org/r/1498459987-24562-10-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch enables read IO from backing device.  For the feature, it
implements two IO read functions to transfer data from backing storage.

One is asynchronous IO function and other is synchronous one.

A reason I need synchrnous IO is due to partial write which need to
complete read IO before the overwriting partial data.

We can make the partial IO's case asynchronous, too but at the moment, I
don't feel adding more complexity to support such rare use cases so want
to go with simple.

[xieyisheng1@huawei.com: read_from_bdev_async(): return 1 to avoid call page_endio() in zram_rw_page()]
  Link: http://lkml.kernel.org/r/1502707447-6944-1-git-send-email-xieyisheng1@huawei.com
Link: http://lkml.kernel.org/r/1498459987-24562-9-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch enables write IO to transfer data to backing device.  For
that, it implements write_to_bdev function which creates new bio and
chaining with parent bio to make the parent bio asynchrnous.

For rw_page which don't have parent bio, it submit owned bio and handle
IO completion by zram_page_end_io.

Also, this patch defines new flag ZRAM_WB to mark written page for later
read IO.

[xieyisheng1@huawei.com: fix typo in comment]
  Link: http://lkml.kernel.org/r/1502707447-6944-2-git-send-email-xieyisheng1@huawei.com
Link: http://lkml.kernel.org/r/1498459987-24562-8-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For upcoming asynchronous IO like writeback, zram_rw_page should be
aware of that whether requested IO was completed or submitted
successfully, otherwise error.

For the goal, zram_bvec_rw has three return values.

-errno: returns error number
     0: IO request is done synchronously
     1: IO request is issued successfully.

Link: http://lkml.kernel.org/r/1498459987-24562-7-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With backing device, zram needs management of free space of backing
device.

This patch adds bitmap logic to manage free space which is very naive.
However, it would be simple enough as considering uncompressible pages's
frequenty in zram.

Link: http://lkml.kernel.org/r/1498459987-24562-6-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For writeback feature, user should set up backing device before the zram
working.

This patch enables the interface via /sys/block/zramX/backing_dev.

Currently, it supports block device only but it could be enhanced for
file as well.

Link: http://lkml.kernel.org/r/1498459987-24562-5-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zram_decompress_page naming is not proper because it doesn't decompress
if page was dedup hit or stored with compression.

Use more abstract term and consistent with write path function
__zram_bvec_write.

Link: http://lkml.kernel.org/r/1498459987-24562-4-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zram_compress does several things, compress, entry alloc and check
limitation.  I did for just readbility but it hurts modulization.:(

So this patch removes zram_compress functions and inline it in
__zram_bvec_write for upcoming patches.

Link: http://lkml.kernel.org/r/1498459987-24562-3-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "writeback incompressible pages to storage", v1.

zRam is useful for memory saving with compressible pages but sometime,
workload can be changed and system has lots of incompressible pages
which is very harmful for zram.

This patch supports writeback feature of zram so admin can set up a
block device and with it, zram can save the memory via writing out the
incompressile pages once it found it's incompressible pages (1/4 comp
ratio) instead of keeping the page in memory.

[1-3] is just clean up and [4-8] is step by step feature enablement.
[4-8] is logically not bisectable(ie, logical unit separation)
although I tried to compiled out without breaking but I think it would
be better to review.

This patch (of 9):

__zram_bvec_write has some of duplicated logic for zram meta data
handling of same_page|compressed_page.  This patch aims to clean it up
without behavior change.

[xieyisheng1@huawei.com: fix compr_data_size stat]
  Link: http://lkml.kernel.org/r/1502707447-6944-1-git-send-email-xieyisheng1@huawei.com
Link: http://lkml.kernel.org/r/1496019048-27016-1-git-send-email-minchan@kernel.org
Link: http://lkml.kernel.org/r/1498459987-24562-2-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Juneho Choi <juno.choi@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>