- 08 1月, 2006 1 次提交
-
-
由 Russell King 提交于
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 04 1月, 2006 1 次提交
-
-
由 Russell King 提交于
It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 11月, 2005 1 次提交
-
-
由 Russell King 提交于
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 10月, 2005 1 次提交
-
-
由 Russell King 提交于
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 10月, 2005 4 次提交
-
-
由 Ben Dooks 提交于
Initialise the .owner field of the driver with the module that owns it, to aid in linking drivers to modules. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
-
由 David Brownell 提交于
This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-)
-
- 29 9月, 2005 1 次提交
-
-
由 Russell King 提交于
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 9月, 2005 1 次提交
-
-
由 Ben Dooks 提交于
Fix the port numbering confusion for the S3C24XX platform device information as reported by Rudy <rudyboy168@gmail.com> This patch ensurs that the the ports are numbered 0 and 1. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 7月, 2005 1 次提交
-
-
由 Ben Dooks 提交于
USB (OHCI) Host driver for S3C2410/S3C2440 based systems Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-