- 09 1月, 2006 9 次提交
-
-
由 David Howells 提交于
Force the 8230 serial driver to be built in if the on-CPU UARTs are to be used. It can't be used as a module because the arch setup needs to call into it. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Fix PCMCIA configuration for FRV by including the stock PCMCIA configuration description file. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Implement pci_iomap() for FRV. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Add stubs for FRV module support. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Fix the exception table handling so that modules exceptions are dealt with. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Export a number of features required to build all the modules. It also implements the following simple features: (*) csum_partial_copy_from_user() for MMU as well as no-MMU. (*) __ucmpdi2(). so that they can be exported too. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Drop support for debugging features that aren't supported on FRV: (*) EARLY_PRINTK The on-chip UARTs are set up early enough that this isn't required, and VGA support isn't available. There's also a gdbstub available. (*) DEBUG_PAGEALLOC This can't be easily be done since we use huge static mappings to cover the kernel, not pages. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Drop support for 8-bit and 16-bit xchg and cmpxchg emulation and implements 32-bit xchg with the SWAP/SWAPI instruction. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
sys_migrate_pages implementation using swap based page migration This is the original API proposed by Ray Bryant in his posts during the first half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org. The intent of sys_migrate is to migrate memory of a process. A process may have migrated to another node. Memory was allocated optimally for the prior context. sys_migrate_pages allows to shift the memory to the new node. sys_migrate_pages is also useful if the processes available memory nodes have changed through cpuset operations to manually move the processes memory. Paul Jackson is working on an automated mechanism that will allow an automatic migration if the cpuset of a process is changed. However, a user may decide to manually control the migration. This implementation is put into the policy layer since it uses concepts and functions that are also needed for mbind and friends. The patch also provides a do_migrate_pages function that may be useful for cpusets to automatically move memory. sys_migrate_pages does not modify policies in contrast to Ray's implementation. The current code here is based on the swap based page migration capability and thus is not able to preserve the physical layout relative to it containing nodeset (which may be a cpuset). When direct page migration becomes available then the implementation needs to be changed to do a isomorphic move of pages between different nodesets. The current implementation simply evicts all pages in source nodeset that are not in the target nodeset. Patch supports ia64, i386 and x86_64. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 1月, 2006 1 次提交
-
-
由 Russell King 提交于
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 1月, 2006 30 次提交
-
-
由 Russell King 提交于
Make the AMBA bus code visible to other architectures. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Fix a gcc4 build error (incomplete element type) in the pxa SharpSL PM code. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Brian Gerst 提交于
Many arches make shared objects for VDSOs. Generally exclude them. Signed-off-by: NBrian Gerst <bgerst@didntduck.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Linus Torvalds 提交于
This was harmless, but for the case of a device that had no irq pre-defined we would incorrectly suggest that "usepirqmask" might make a difference. It never would, and the message was just confusing people. Reported in the dmesg of Etienne Lorrain. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Frank Pavlic 提交于
New feature V=V qdio pass-through. QDIO and HiperSockets processing in z/VM V=V guest environments (as well as V=R with z/VM running in LPAR mode) requires shadowing of all QDIO architecture queue elements. Especially the shadowing of SBALs and SLSBs structures in the hypervisor, and the need to issue SIGA SYNC operations to observe state changes, eventually causes significant CPU processing overhead in the hypervisor. The QDIO pass-through support for V=V guests avoids the shadowing of SBALs and SLSBs. This significantly reduces the hypervisor overhead for QDIO based I/O. Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Glauber 提交于
Add support for the hardware accelerated AES crypto algorithm. Signed-off-by: NJan Glauber <jan.glauber@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Glauber 提交于
Add support for the hardware accelerated sha256 crypto algorithm. Signed-off-by: NJan Glauber <jan.glauber@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Glauber 提交于
Replace all references to z990 by s390 in the in-kernel crypto files in arch/s390/crypto. The code is not specific to a particular machine (z990) but to the s390 platform. Big diff, does nothing.. Signed-off-by: NJan Glauber <jan.glauber@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Krebbel 提交于
Signed-off-by: NAndreas Krebbel <krebbel1@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
There are some more places where the use of cputime_t instead of an integer type and the associated macros is necessary for the virtual cputime accounting on s390. Affected are the s390 specific appldata code and BSD process accounting. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Cedric Le Goater 提交于
Check return code of do_sigaltstack and force a SIGSEGV if it is -EFAULT. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NCedric Le Goater <clg@fr.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Convert __access_ok to an inline C function and change __get_user primitive to avoid uaccess compiler warnings. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Hugh Dickins <hugh@veritas.com> Fix the broken atomic_cmpxchg primitive. Add atomic_sub_and_test, atomic64_sub_return, atomic64_sub_and_test, atomic64_cmpxchg, atomic64_add_unless and atomic64_inc_not_zero. Replace old style atomic_compare_and_swap by atomic_cmpxchg. Shorten the whole header by defining most primitives with the two inline functions atomic_add_return and atomic_sub_return. In addition this patch contains the s390 related fixes of Hugh's "mm: fill arch atomic64 gaps" patch. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Free the network IRQ when closing down the network devices at shutdown. Delete the device from the opened devices list on close. These prevent an -EBADF when later disabling SIGIO on all extant descriptors and a complaint from free_irq about freeing the IRQ twice. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Fix up some bogus spacing in the mconsole driver. Also delete the emacs formatting comment at the end. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Pass sysrq output back to the mconsole client using the mechanism introduced for stack output. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
The stack command now sends the printk output back to the mconsole client. This is done by registering a special console for the mconsole driver. This receives all printk output. Normally, it is ignored, but when a stack command is issued, any printk output will be sent back to the client. This will capture any printk output, whether it is stack output or not, since we can't tell the difference. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This is needed for the console output patch, since we have a possibly non-NULL-terminated string there. So, the new interface takes a string and a length, and the old interface calls strlen on its string and calls the new interface with the length. There's also a bit of whitespace cleanup. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Produce a compile-time error if both MODE_SKAS and MODE_TT are disabled. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Code cleanup - unregister_winch and winch_cleanup had some duplicate code. This is now abstracted out into free_winch. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This patch cleans up the umid code: - The only_if_set argument to get_umid is gone. - get_umid returns an empty string rather than NULL if there is no umid. - umid_is_random is gone since its users went away. - Some printfs were turned into printks because the code runs late enough that printk is working. - Error paths were cleaned up. - Some functions now return an error and let the caller print the error message rather than printing it themselves. This eliminates the practice of passing a pointer to printf or printk in, depending on where in the boot process we are. - Major tidying of not_dead_yet - mostly error path cleanup, plus a comment explaining why it doesn't react to errors the way you might expect. - Calls to os_* interfaces that were moved under os are changed back to their native libc forms. - snprintf, strlcpy, and their bounds-checking friends are used more often, replacing by-hand bounds checking in some places. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
I reworked Gennady's umid OS abstraction patch because the code shouldn't be moved entirely to os. As it turns out, I moved most of it anyway. This patch is the minimal one needed to move the code and have it work. It turns out that the concept of the umid is OS-independent, but almost everything else about the implementation is OS-dependent. This is code movement without cleanup - a follow-on patch tidies everything up without shuffling code around. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This patch adds support for throttling and unthrottling input when the tty driver can't handle it. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
When the tty flip_buf is full, it's a good idea to delay the input processing for a jiffy, rather than just scheduling the tasklet immediately. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This patch simplifies the opening and closing of host console devices and the registration and deregistration of IRQs. The intent is to make it obvious that an IRQ can't exist without an open file descriptor. chan_enable will now open the channel, and when both opening and IRQ registration are desired, this should be used. Opening only is done for the initial console, so that interface still needs to exist. The free_irqs_later interface is now gone. It was intended to avoid freeing an IRQ while it was being processed. It did this, but it didn't eliminate the possiblity of free_irq being called from an interrupt, which is bad. In its place is a list of irqs to be freed, which is processed by the signal handler just before exiting. close_one_chan now disables irqs. When a host device disappears, it is just closed, and that disables IRQs. The device id registered with the IRQ is now the chan structure, not the tty. This is because the interrupt arrives on a descriptor associated with the channel. This caused equivalent changes in the arguments to line_timer_cb. line_disable is gone since it is not used any more. The count field in the line structure is gone. tty->count is used instead. The complicated logic in sigio_handler with freeing IRQs when necessary and making sure its idea of the next irq is correct is now much simpler. The irq list can't be rearranged underneath it, so it is now a simple list walk. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This patch changes when console devices are configured in order to prepare the ground for the next patch. parse_chan_pair is now done earlier, when initcalls are run, rather than when the device is opened. When a host device disappears, the channel list is closed, but not freed. This is required by the previous change. line_config now takes the options structure as an argument, and line_open doesn't. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
line_setup is changed to return the device which it set up, rather than just success or failure. This will be important in the line-config patch. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-