Pull networking fixes from David Miller:
 "Mostly small bits scattered all over the place, which is usually how
  things go this late in the -rc series.

   1) Proper driver init device resets in bnx2, from Baoquan He.

   2) Fix accounting overflow in __tcp_retransmit_skb(),
      sk_forward_alloc, and ip_idents_reserve, from Eric Dumazet.

   3) Fix crash in bna driver ethtool stats handling, from Ivan Vecera.

   4) Missing check of skb_linearize() return value in mac80211, from
      Johannes Berg.

   5) Endianness fix in nf_table_trace dumps, from Liping Zhang.

   6) SSN comparison fix in SCTP, from Marcelo Ricardo Leitner.

   7) Update DSA and b44 MAINTAINERS entries.

   8) Make input path of vti6 driver work again, from Nicolas Dichtel.

   9) Off-by-one in mlx4, from Sebastian Ott.

  10) Fix fallback route lookup handling in ipv6, from Vincent Bernat.

  11) Fix stack corruption on probe in qed driver, from Yuval Mintz.

  12) PHY init fixes in r8152 from Hayes Wang.

  13) Missing SKB free in irda_accept error path, from Phil Turnbull"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  tcp: properly account Fast Open SYN-ACK retrans
  tcp: fix under-accounting retransmit SNMP counters
  MAINTAINERS: Update b44 maintainer.
  net: get rid of an signed integer overflow in ip_idents_reserve()
  net/mlx4_core: Fix to clean devlink resources
  net: can: ifi: Configure transmitter delay
  vti6: fix input path
  ipmr, ip6mr: return lastuse relative to now
  r8152: disable ALDPS and EEE before setting PHY
  r8152: remove r8153_enable_eee
  r8152: move PHY settings to hw_phy_cfg
  r8152: move enabling PHY
  r8152: move some functions
  cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter
  qed: Fix stack corruption on probe
  MAINTAINERS: Add an entry for the core network DSA code
  net: ipv6: fallback to full lookup if table lookup is unsuitable
  net/mlx5: E-Switch, Handle mode change failures
  net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code
  net/mlx5: Fix flow counter bulk command out mailbox allocation
  ...

Since the TFO socket is accepted right off SYN-data, the socket
owner can call getsockopt(TCP_INFO) to collect ongoing SYN-ACK
retransmission or timeout stats (i.e., tcpi_total_retrans,
tcpi_retransmits). Currently those stats are only updated
upon handshake completes. This patch fixes it.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes these under-accounting SNMP rtx stats
LINUX_MIB_TCPFORWARDRETRANS
LINUX_MIB_TCPFASTRETRANS
LINUX_MIB_TCPSLOWSTARTRETRANS
when retransmitting TSO packets

Fixes: 10d3be56 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2016-09-21

1) Propagate errors on security context allocation.
   From Mathias Krause.

2) Fix inbound policy checks for inter address family tunnels.
   From Thomas Zeitlhofer.

3) Fix an old memory leak on aead algorithm usage.
   From Ilan Tayari.

4) A recent patch fixed a possible NULL pointer dereference
   but broke the vti6 input path.
   Fix from Nicolas Dichtel.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.8-20160921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-09-21

this is another pull request of one patch for the upcoming linux-4.8 release.

Marek Vasut fixes the CAN-FD bit rate switch in the ifi driver by configuring
the transmitter delay.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Taking over as maintainer since Gary Zambrano is no longer working
for Broadcom.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko reported an UBSAN warning happening in ip_idents_reserve()

[] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:11
[] signed integer overflow:
[] -2117905507 + -695755206 cannot be represented in type 'int'

Since we do not have uatomic_add_return() yet, use atomic_cmpxchg()
so that the arithmetics can be done using unsigned int.

Fixes: 04ca6973 ("ip: make IP identifiers less predictable")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans devlink resources by calling devlink_port_unregister()
to avoid the following issues:

- Kernel panic when triggering reset flow.
- Memory leak due to unfreed resources in mlx4_init_port_info().

Fixes: 09d4d087 ("mlx4: Implement devlink interface")
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.8

iwlwifi

* fix to prevent firmware crash when sending off-channel frames
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Configure the transmitter delay register at +0x1c to correctly handle
the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample
point) to a proper offset, so that the TDC mechanism works and won't
generate error frames on the CAN link.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Since commit 1625f452, vti6 is broken, all input packets are dropped
(LINUX_MIB_XFRMINNOSTATES is incremented).

XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling
xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in
xfrm6_rcv_spi().

A new function xfrm6_rcv_tnl() that enables to pass a value to
xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function
is used in several handlers).

CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Fixes: 1625f452 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

When I introduced the lastuse member I made a subtle error because it was
returned as an absolute value but that is meaningless to user-space as it
doesn't allow to see how old exactly an entry is. Let's make it similar to
how the bridge returns such values and make it relative to "now" (jiffies).
This allows us to show the actual age of the entries and is much more
useful (e.g. user-space daemons can age out entries, iproute2 can display
the lastuse properly).

Fixes: 43b9e127 ("net: ipmr/ip6mr: add support for keeping an entry age")
Reported-by: NSatish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: correct the flow of PHY

First, to enable the PHY as early as possible. Some settings may fail if the
PHY is power down.

Move the other PHY settings to hw_phy_cfg() to make sure the order is correct.

Finally, disable ALDPS and EEE before updating the PHY for RTL8153.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Disable ALDPS and EEE to avoid the possible failure when setting the PHY.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove r8153_enable_eee().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the PHY relative settings together to hw_phy_cfg().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move enabling PHY to init(), otherwise some other settings may fail.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the following functions forward.

	r8152_mmd_indirect()
	r8152_mmd_read()
	r8152_mmd_write()
	r8152_eee_en()
	r8152b_enable_eee()
	r8153_eee_en()
	r8153_enable_eee()
	r8152b_enable_fc()
	r8153_aldps_en()
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We were missing check for 25G and 100G while checking port speed,
which lead to less number of queues getting allocated for 25G & 100G
adapters and leading to low throughput. Adding the missing check for
both NIC and vNIC driver.

Also fixes port advertisement for 25G and 100G in ethtool output.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.8-20160919' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-09-19

this is a pull request of one patch for the upcoming linux-4.8 release.

The patch by Fabio Estevam fixes the pm handling in the flexcan driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull usercopy hardening fix from Kees Cook:
 "Expand the arm64 vmalloc check to include skipping the module space
  too"

* tag 'usercopy-v4.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  mm: usercopy: Check for module addresses

Switching iov_iter fault-in to multipages variants has exposed an old
bug in underlying fault_in_multipages_...(); they break if the range
passed to them wraps around.  Normally access_ok() done by callers will
prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into
such a range and they should not point to any valid objects).

However, on architectures where userland and kernel live in different
MMU contexts (e.g. s390) access_ok() is a no-op and on those a range
with a wraparound can reach fault_in_multipages_...().

Since any wraparound means EFAULT there, the fix is trivial - turn
those

    while (uaddr <= end)
	    ...
into

    if (unlikely(uaddr > end))
	    return -EFAULT;
    do
	    ...
    while (uaddr <= end);
Reported-by: NJan Stancek <jstancek@redhat.com>
Tested-by: NJan Stancek <jstancek@redhat.com>
Cc: stable@vger.kernel.org # v3.5+
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While running a compile on arm64, I hit a memory exposure

usercopy: kernel memory exposure attempt detected from fffffc0000f3b1a8 (buffer_head) (1 bytes)
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:75!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in: ip6t_rpfilter ip6t_REJECT
nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_broute bridge stp
llc ebtable_nat ip6table_security ip6table_raw ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle
iptable_security iptable_raw iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle
ebtable_filter ebtables ip6table_filter ip6_tables vfat fat xgene_edac
xgene_enet edac_core i2c_xgene_slimpro i2c_core at803x realtek xgene_dma
mdio_xgene gpio_dwapb gpio_xgene_sb xgene_rng mailbox_xgene_slimpro nfsd
auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sdhci_of_arasan
sdhci_pltfm sdhci mmc_core xhci_plat_hcd gpio_keys
CPU: 0 PID: 19744 Comm: updatedb Tainted: G        W 4.8.0-rc3-threadinfo+ #1
Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.12 Aug 12 2016
task: fffffe03df944c00 task.stack: fffffe00d128c000
PC is at __check_object_size+0x70/0x3f0
LR is at __check_object_size+0x70/0x3f0
...
[<fffffc00082b4280>] __check_object_size+0x70/0x3f0
[<fffffc00082cdc30>] filldir64+0x158/0x1a0
[<fffffc0000f327e8>] __fat_readdir+0x4a0/0x558 [fat]
[<fffffc0000f328d4>] fat_readdir+0x34/0x40 [fat]
[<fffffc00082cd8f8>] iterate_dir+0x190/0x1e0
[<fffffc00082cde58>] SyS_getdents64+0x88/0x120
[<fffffc0008082c70>] el0_svc_naked+0x24/0x28

fffffc0000f3b1a8 is a module address. Modules may have compiled in
strings which could get copied to userspace. In this instance, it
looks like "." which matches with a size of 1 byte. Extend the
is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover
all possible cases.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NKees Cook <keescook@chromium.org>

We hit hardened usercopy feature check for kernel text access by reading
kcore file:

  usercopy: kernel memory exposure attempt detected from ffffffff8179a01f (<kernel text>) (4065 bytes)
  kernel BUG at mm/usercopy.c:75!

Bypassing this check for kcore by adding bounce buffer for ktext data.
Reported-by: NSteve Best <sbest@redhat.com>
Fixes: f5509cc1 ("mm: Hardened usercopy")
Suggested-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Next patch adds bounce buffer for ktext area, so it's
convenient to have single bounce buffer for both
vmalloc/module and ktext cases.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit fe56b9e6 ("qed: Add module with basic common support")
has introduced a stack corruption during probe, where filling a
local struct with data to be sent to management firmware is incorrectly
filled; The data is written outside of the struct and corrupts
the stack.

Changes from v1:
----------------
 - Correct the value written [Caught by David Laight]

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The core distributed switch architecture code currently does not have
a MAINTAINERS entry, which results in some contributions not landing
in the right peoples inbox.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 8c14586f ("net: ipv6: Use passed in table for nexthop
lookups") introduced a regression: insertion of an IPv6 route in a table
not containing the appropriate connected route for the gateway but which
contained a non-connected route (like a default gateway) fails while it
was previously working:

    $ ip link add eth0 type dummy
    $ ip link set up dev eth0
    $ ip addr add 2001:db8::1/64 dev eth0
    $ ip route add ::/0 via 2001:db8::5 dev eth0 table 20
    $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
    RTNETLINK answers: No route to host
    $ ip -6 route show table 20
    default via 2001:db8::5 dev eth0  metric 1024  pref medium

After this patch, we get:

    $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
    $ ip -6 route show table 20
    2001:db8:cafe::1 via 2001:db8::6 dev eth0  metric 1024  pref medium
    default via 2001:db8::5 dev eth0  metric 1024  pref medium

Fixes: 8c14586f ("net: ipv6: Use passed in table for nexthop lookups")
Signed-off-by: NVincent Bernat <vincent@bernat.im>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Tested-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
mlx5 fixes to 4.8-rc6

This series series has a fix from Roi to memory corruption bug in
the bulk flow counters code and two late and hopefully last fixes
from me to the new eswitch offloads code.

Series done over net commit 37dd3482 "bna: fix crash in bnad_get_strings()"
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

E-switch mode changes involve creating HW tables, potentially allocating
netdevices, etc, and things can fail. Add an attempt to rollback to the
existing mode when changing to the new mode fails. Only if rollback fails,
getting proper SRIOV functionality requires module unload or sriov
disablement/enablement.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When enablement of the SRIOV e-switch in certain mode (switchdev or legacy)
fails, we must set the mode to none. Otherwise, we'll run into double free
based crashes when further attempting to deal with the e-switch (such
as when disabling sriov or unloading the driver).
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The FW command output length should be only the length of struct
mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy
call which is invoked later in the driver to write over wrong memory
address and corrupt kernel memory which results in random crashes.

This bug was found using the kernel address sanitizer (kasan).

Fixes: a351a1b0 ('net/mlx5: Introduce bulk reading of flow counters')
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge fixes from Andrew Morton:
 "20 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  rapidio/rio_cm: avoid GFP_KERNEL in atomic context
  Revert "ocfs2: bump up o2cb network protocol version"
  ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
  cgroup: duplicate cgroup reference when cloning sockets
  mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting
  ocfs2: fix double unlock in case retry after free truncate log
  fanotify: fix list corruption in fanotify_get_response()
  fsnotify: add a way to stop queueing events on group shutdown
  ocfs2: fix trans extend while free cached blocks
  ocfs2: fix trans extend while flush truncate log
  ipc/shm: fix crash if CONFIG_SHMEM is not set
  mm: fix the page_swap_info() BUG_ON check
  autofs: use dentry flags to block walks during expire
  MAINTAINERS: update email for VLYNQ bus entry
  mm: avoid endless recursion in dump_page()
  mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin()
  khugepaged: fix use-after-free in collapse_huge_page()
  MAINTAINERS: Maik has moved
  ocfs2/dlm: fix race between convert and migration
  mem-hotplug: don't clear the only node in new_node_page()

As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737):
riocm_send_close() is called from rio_cm_shutdown() under
spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL
allocation.

Fix by taking riocm_send_close() outside of spinlock protected code.

[akpm@linux-foundation.org: remove unneeded `if (!list_empty())']
Link: http://lkml.kernel.org/r/20160915175402.10122-1-alexandre.bounine@idt.comSigned-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Reported-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 38b52efd ("ocfs2: bump up o2cb network protocol
version").

This commit made rolling upgrade fail.  When one node is upgraded to new
version with this commit, the remaining nodes will fail to establish
connections to it, then the application like VMs on the remaining nodes
can't be live migrated to the upgraded one.  This will cause an outage.
Since negotiate hb timeout behavior didn't change without this commit,
so revert it.

Fixes: 38b52efd ("ocfs2: bump up o2cb network protocol version")
Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we punch a hole on a reflink such that following conditions are met:

1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
   (hole range > MAX_CONTIG_BYTES(1MB)),

we dont COW the first cluster starting at the start offset.  But in this
case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out.  This will modify the
cluster in place and zero it in the source too.

Fix this by skipping this cluster in such a scenario.

To reproduce:

1. Create a random file of say 10 MB
     xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink  it
     reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary  with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
     fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the  first cluster in the source file. (It will be zeroed out).
    dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C

Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.comSigned-off-by: NAshish Samant <ashish.samant@oracle.com>
Reported-by: NSaar Maoz <saar.maoz@oracle.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a socket is cloned, the associated sock_cgroup_data is duplicated
but not its reference on the cgroup.  As a result, the cgroup reference
count will underflow when both sockets are destroyed later on.

Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup")
Link: http://lkml.kernel.org/r/20160914194846.11153-2-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During cgroup2 rollout into production, we started encountering css
refcount underflows and css access crashes in the memory controller.
Splitting the heavily shared css reference counter into logical users
narrowed the imbalance down to the cgroup2 socket memory accounting.

The problem turns out to be the per-cpu charge cache.  Cgroup1 had a
separate socket counter, but the new cgroup2 socket accounting goes
through the common charge path that uses a shared per-cpu cache for all
memory that is being tracked.  Those caches are safe against scheduling
preemption, but not against interrupts - such as the newly added packet
receive path.  When cache draining is interrupted by network RX taking
pages out of the cache, the resuming drain operation will put references
of in-use pages, thus causing the imbalance.

Disable IRQs during all per-cpu charge cache operations.

Fixes: f7e1cb6e ("mm: memcontrol: account socket memory in unified hierarchy memory controller")
Link: http://lkml.kernel.org/r/20160914194846.11153-1-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If ocfs2_reserve_cluster_bitmap_bits() fails with ENOSPC, it will try to
free truncate log and then retry.  Since ocfs2_try_to_free_truncate_log
will lock/unlock global bitmap inode, we have to unlock it before
calling this function.  But when retry reserve and it fails with no
global bitmap inode lock taken, it will unlock again in error handling
branch and BUG.

This issue also exists if no need retry and then ocfs2_inode_lock fails.
So fix it.

Fixes: 2070ad1a ("ocfs2: retry on ENOSPC if sufficient space in truncate log")
Link: http://lkml.kernel.org/r/57D91939.6030809@huawei.comSigned-off-by: NJoseph Qi <joseph.qi@huawei.com>
Signed-off-by: NJiufei Xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fanotify_get_response() calls fsnotify_remove_event() when it finds that
group is being released from fanotify_release() (bypass_perm is set).

However the event it removes need not be only in the group's notification
queue but it can have already moved to access_list (userspace read the
event before closing the fanotify instance fd) which is protected by a
different lock.  Thus when fsnotify_remove_event() races with
fanotify_release() operating on access_list, the list can get corrupted.

Fix the problem by moving all the logic removing permission events from
the lists to one place - fanotify_release().

Fixes: 5838d444 ("fanotify: fix double free of pending permission events")
Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Reported-by: NMiklos Szeredi <mszeredi@redhat.com>
Tested-by: NMiklos Szeredi <mszeredi@redhat.com>
Reviewed-by: NMiklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>