btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe
and btrfs_log_new_name) both of which pass inode->root as the root
argument and the inode itself. Remove the redundant root argument and
get a reference to the root directly from the inode, also remove
redundant root != inode->root check from the same function. No
functional change.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function always sets keep_locks to 1 and saves the old value of
keep_locks which is restored at the end. So there is no way it can be
called without keep_locks being set. Remove comment imposing redundant
requirement on callers.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There's a proper header for xattr handlers.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The xattr_handler::get prototype returns int, use it. The only ssize_t
exception is the per-inode listxattr handler.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Extern for functions does not make any difference, there are only a few
so let's remove them before it's too late.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When send finishes processing an inode representing a regular file, it
always issues a truncate operation for that file, even if its size did
not change or the last write sets the file size correctly. In the most
common cases, the issued write operations set the file to correct size
(either full or incremental sends) or the file size did not change (for
incremental sends), so the only case where a truncate operation is needed
is when a file size becomes smaller in the send snapshot when compared
to the parent snapshot.

By not issuing unnecessary truncate operations we reduce the stream size
and save time in the receiver. Currently truncating a file to the same
size triggers writeback of its last page (if it's dirty) and waits for it
to complete (only if the file size is not aligned with the filesystem's
sector size). This is being fixed by another patch and is independent of
this change (that patch's title is "Btrfs: skip writeback of last page
when truncating file to same size").

The following script was used to measure time spent by a receiver without
this change applied, with this change applied, and without this change and
with the truncate fix applied (the fix to not make it start and wait for
writeback to complete).

  $ cat test_send.sh
  #!/bin/bash

  SRC_DEV=/dev/sdc
  DST_DEV=/dev/sdd
  SRC_MNT=/mnt/sdc
  DST_MNT=/mnt/sdd

  mkfs.btrfs -f $SRC_DEV >/dev/null
  mkfs.btrfs -f $DST_DEV >/dev/null
  mount $SRC_DEV $SRC_MNT
  mount $DST_DEV $DST_MNT

  echo "Creating source filesystem"
  for ((t = 0; t < 10; t++)); do
      (
          for ((i = 1; i <= 20000; i++)); do
              xfs_io -f -c "pwrite -S 0xab 0 5000" \
                  $SRC_MNT/file_$i > /dev/null
          done
      ) &
     worker_pids[$t]=$!
  done
  wait ${worker_pids[@]}

  echo "Creating and sending snapshot"
  btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
  /usr/bin/time -f "send took %e seconds"    \
         btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
  /usr/bin/time -f "receive took %e seconds" \
         btrfs receive -f $SRC_MNT/send_file $DST_MNT

  umount $SRC_MNT
  umount $DST_MNT

The results, which are averages for 5 runs for each case, were the
following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* Without this change and with the truncate fix

average receive time was 12.51 seconds
standard deviation of 0.32 seconds

* With this change and without the truncate fix

average receive time was 10.02 seconds
standard deviation of 1.11 seconds
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we truncate a file to the same size and that size is not aligned
with the sector size, we end up triggering writeback (and wait for it to
complete) of the last page. This is unncessary as we can not have delayed
allocation beyond the inode's i_size and the goal of truncating a file
to its own size is to discard prealloc extents (allocated via the
fallocate(2) system call). Besides the unnecessary IO start and wait, it
also breaks the oppurtunity for larger contiguous extents on disk, as
before the last dirty page there might be other dirty pages.

This scenario is probably not very common in general, however it is
common for btrfs receive implementations because currently the send
stream always issues a truncate operation for each processed inode as
the last operation for that inode (this truncate operation is not
always needed and the send implementation will be addressed to avoid
them).

So improve this by not starting and waiting for writeback of the inode's
last page when we are truncating to exactly the same size.

The following script was used to quickly measure the time a receive
operation takes:

 $ cat test_send.sh
 #!/bin/bash

 SRC_DEV=/dev/sdc
 DST_DEV=/dev/sdd
 SRC_MNT=/mnt/sdc
 DST_MNT=/mnt/sdd

 mkfs.btrfs -f $SRC_DEV >/dev/null
 mkfs.btrfs -f $DST_DEV >/dev/null
 mount $SRC_DEV $SRC_MNT
 mount $DST_DEV $DST_MNT

 echo "Creating source filesystem"
 for ((t = 0; t < 10; t++)); do
     (
         for ((i = 1; i <= 20000; i++)); do
             xfs_io -f -c "pwrite -S 0xab 0 5000" \
                $SRC_MNT/file_$i > /dev/null
         done
     ) &
     worker_pids[$t]=$!
 done
 wait ${worker_pids[@]}

 echo "Creating and sending snapshot"
 btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
 /usr/bin/time -f "send took %e seconds"    \
     btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
 /usr/bin/time -f "receive took %e seconds" \
     btrfs receive -f $SRC_MNT/send_file $DST_MNT

 umount $SRC_MNT
 umount $DST_MNT

The results for 5 runs were the following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* With this change

average receive time was 12.51 seconds
standard deviation of 0.32 seconds
Reported-by: NRobbie Ko <robbieko@synology.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It doens't make sense to process prealloc extents as pages will be
filled with zero when reading prealloc extents.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have btrfs_fs_info::data_chunk_allocations and
btrfs_fs_info::metadata_ratio declared as unsigned which would be
unsinged int and kernel style prefers unsigned int over bare unsigned.
So this patch changes them to u32.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Using any kind of memory barriers around atomic operations which have
a return value is redundant, since those operations themselves are
fully ordered. atomic_t.txt states:

    - RMW operations that have a return value are fully ordered;

    Fully ordered primitives are ordered against everything prior and
    everything subsequent. Therefore a fully ordered primitive is like
    having an smp_mb() before and an smp_mb() after the primitive.

Given this let's replace the extra memory barriers with comments.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In the same function we just ran btrfs_alloc_device() which means the
btrfs_device::resized_list is sure to be empty and we are protected
with the btrfs_fs_info::volume_mutex.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The __cold functions are placed to a special section, as they're
expected to be called rarely. This could help i-cache prefetches or help
compiler to decide which branches are more/less likely to be taken
without any other annotations needed.

Though we can't add more __exit annotations, it's still possible to add
__cold (that's also added with __exit). That way the following function
categories are tagged:

- printf wrappers, error messages
- exit helpers
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Recently, the __init annotations have been added. There's unfortunatelly
only one case where we can add __exit, because most of the cleanup
helpers are also called from the __init phase.

As the __exit annotated functions get discarded completely for a
built-in code, we'd miss them from the init phase.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We aren't verifying the parameter passed to the subvolid mount option,
so we won't report and fail the mount if a junk value is specified for
example, -o subvolid=abc.
This patch verifies the subvolid option with match_u64.

Up to now the memparse function accepts the K/M/G/ suffixes, that are
usually meant for size values and do not make sense for a subvolume it.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Fstests generic/475 provides a way to fail metadata reads while
checking if checksum exists for the inode inside run_delalloc_nocow(),
and csum_exist_in_range() interprets error (-EIO) as inode having
checksum and makes its caller enter the cow path.

In case of free space inode, this ends up with a warning in
cow_file_range().

The same problem applies to btrfs_cross_ref_exist() since it may also
read metadata in between.

With this, run_delalloc_nocow() bails out when errors occur at the two
places.

cc: <stable@vger.kernel.org> v2.6.28+
Fixes: 17d217fe ("Btrfs: fix nodatasum handling in balancing code")
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The custom crc32 init code was introduced in
14a958e6 ("Btrfs: fix btrfs boot when compiled as built-in") to
enable using btrfs as a built-in. However, later as pointed out by
60efa5eb ("Btrfs: use late_initcall instead of module_init") this
wasn't enough and finally btrfs was switched to late_initcall which
comes after the generic crc32c implementation is initiliased. The
latter commit superseeded the former. Now that we don't have to
maintain our own code let's just remove it and switch to using the
generic implementation.

Despite touching a lot of files the patch is really simple. Here is the gist of
the changes:

1. Select LIBCRC32C rather than the low-level modules.
2. s/btrfs_crc32c/crc32c/g
3. replace hash.h with linux/crc32c.h
4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly.

I've tested this with btrfs being both a module and a built-in and xfstest
doesn't complain.

Does seem to fix the longstanding problem of not automatically selectiong
the crc32c module when btrfs is used. Possibly there is a workaround in
dracut.

The modinfo confirms that now all the module dependencies are there:

before:
depends:        zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate

after:
depends:        libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ add more info to changelog from mails ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function returns a string with the currently in-use implementation
of the crc32c algorithm, i.e crc32c-generic (for unoptimised, generic
implementation) or crc32c-intel for the sse optimised version. This
will be used by btrfs.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
[ use crypto_shash_driver_name as suggested by Herbert ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Function __get_raid_index() is used to convert block group flags into
raid index, which can be used to get various info directly from
btrfs_raid_array[].

Refactor this function a little:

1) Rename to btrfs_bg_flags_to_raid_index()
   Double underline prefix is normally for internal functions, while the
   function is used by both extent-tree and volumes.

   Although the name is a little longer, but it should explain its usage
   quite well.

2) Move it to volumes.h and make it static inline
   Just several if-else branches, really no need to define it as a normal
   function.

   This also makes later code re-use between kernel and btrfs-progs
   easier.

3) Remove function get_block_group_index()
   Really no need to do such a simple thing as an exported function.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When inspecting the error message with real corruption, the "root=%llu"
always shows "1" (root tree), instead of the correct owner.

The problem is that we are getting @root from page->mapping->host, which
points the same btree inode, so we will always get the same root.

This makes the root owner output meaningless, and harder to port
tree-checker to btrfs-progs.

So get rid of the false and meaningless @root parameter and replace it
with @fs_info.
To get the owner, we can only rely on btrfs_header_owner() now.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This is adding a tracepoint 'btrfs_handle_em_exist' to help debug the
subtle bugs around merge_extent_mapping.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs_run_qgroups is doing a bit too much. Not only is it
responsible for synchronizing in-memory state of qgroups to disk but
it also contains code to trigger the initial qgroup rescan when
quota is enabled initially. This condition is detected by checking that
BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set.
Nothing really requires from the code to be structured (and scattered)
the way it is so let's streamline things. First move the quota rescan
code into btrfs_quota_enable, where its invocation is closer to the
use. This also makes the FS_QUOTA_ENABLING flag redundant so let's
remove it as well.

This has been tested with a full xfstest run with qgroups enabled on
the scratch device of every xfstest and no regressions were observed.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

load_free_space_tree calls either function load_free_space_bitmaps or
load_free_space_extents. And either of those two will lead to call
btrfs_next_item.  So in function load_free_space_tree, use READA_FORWARD
to read forward ahead.

This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.
Signed-off-by: NGu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

populate_free_space_tree calls function btrfs_search_slot_for_read with
parameter int find_higher = 1, it means that, if no exact match is
found, then use the next higher item.  So in function
populate_free_space_tree, use READA_FORWARD to read forward ahead.

This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.
Signed-off-by: NGu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

delayed_iput_count wa supposed to be used to implement, well, delayed
iput. The idea is that we keep accumulating the number of iputs we do
until eventually the inode is deleted. Turns out we never really
switched the delayed_iput_count from 0 to 1, hence all conditional
code relying on the value of that member being different than 0 was
never executed. This, as it turns out, didn't cause any problem due
to the simple fact that the generic inode's i_count member was always
used to count the number of iputs. So let's just remove the unused
member and all unused code. This patch essentially provides no
functional changes. While at it, also add proper documentation for
btrfs_add_delayed_iput
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ reformat comment ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Cleanup the following things:
1) open coded SZ_16M round up
2) use min() to replace open-coded size comparison
3) code style
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NGu Jinxiang <gujx@cn.fujitsu.com>
[ reformat comment ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The behavior of btrfs_delalloc_reserve_metadata depends on whether
the inode we are allocating for is the freespace inode or not. As it
stands if we are the free node we set 'flush' and 'delalloc_lock'
variable to certain values. Subsequently we check the values of those
vars and act accordingly. Instead, simplify things by having 1 if
which checks whether we are the freespace inode or not and do any
specific operation in either branches of that if. This makes the code
a bit easier to understand, as an added bonus it also shrinks the
compiled size:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-17 (-17)
Function                                     old     new   delta
btrfs_delalloc_reserve_metadata             1876    1859     -17
Total: Before=85966, After=85949, chg -0.02%

No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NEdmund Nadolski <enadolski@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add opened device to the tail of dev_alloc_list instead of head, so that
it maintains the same order as dev_list.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

By maintaining the device list sorted lets us reproduce the problems
related to missing chunk in the degraded mode much more consistent. So
fix this by sorting the devices by devid within the kernel. So that we
know which device is assigned to the struct fs_info::latest_bdev when
all the devices are having and same SB generation.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's not necessary to hold ->orphan_lock when checking inode's runtime
flags.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Instead of manually fiddling with the state of the task
(RUNNING->INTERRUPTIBLE->RUNNING) again just use schedule_timeout_interruptible
which adjusts the task state as needed. No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Even though btrfs_start_dirty_block_groups is fairly in the beginning of
btrfs_commit_transaction outside of the critical section defined by the
transaction states it can only be run by a single comitter. In other
words it defines its own critical section thanks to the
BTRFS_TRANS_DIRTY_BG run flag and ro_block_group_mutex. However, its
error handling is outside of this critical section which is a bit
counter-intuitive. So move the error handling righ after the function is
executed and let the sole runner of dirty block groups handle the return
value. No functional changes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

bio_add_page() can fail for logical reasons as from the bio_add_page()
comments:

/*
 * This will only fail if either bio->bi_vcnt == bio->bi_max_vecs or
 * it's a cloned bio.
 */

Here we have just allocated the bio, so both of those failures can't
occur. So drop the check. We can also drop the error stats for write
error.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Enospc_debug makes extent allocator print more debug messages,
however for chunk allocation, there is no debug message for enospc_debug
at all.

This patch will add message for the following parts of chunk allocator:

1) No rw device at all
   Quite rare, but at least output one message for this case.

2) Not enough space for some device
   This debug message is quite handy for unbalanced disks with stripe
   based profiles (RAID0/10/5/6).

3) Not enough free devices
   This debug message should tell us if current chunk allocator is
   working correctly under minimal device requirements.

Although in most cases, we will hit other ENOSPC before we even hit a
chunk allocator ENOSPC, but such debug info won't help.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use ASSERT to report logical error in cow_file_range(), also move it a
bit closer to when the num_bytes is derived.

The extent start could be (u64)-1 in some cases, the assert should catch
that we do not accidentally pass it to cow_file_range.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This patch deletes local variable disk_num_bytes as its value
is same as num_bytes in the function cow_file_range().
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit [1] removed the need to use btrfs_async_submit_limit(), so
delete it.

[1]
 commit 736cd52e
  Btrfs: remove nr_async_submits and async_submit_draining
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by btrfs at all.

So, remove the unused hardirq.h.
Signed-off-by: NYang Shi <yang.s@alibaba-inc.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently when enospc_debug mount option is turned on we do not print
any debug info in case metadata reservation failures happen. Fix this
by adding the necessary hook in reserve_metadata_bytes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The reason why io_bgs can be modified without holding any lock is
non-obvious. Document it and reference that documentation from the
respective call sites.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>