- 10 11月, 2014 2 次提交
-
-
由 Inki Dae 提交于
This patch resovles the infinite loop issue incurred when Exyno drm driver is enabled but all kms drivers are disabled on Exynos board by returning -EPROBE_DEFER only in case that there is kms device registered. Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
This patch resolves temporarily infinite loop issue incurred when Exynos drm driver is enabled and multi-platform kernel is used by registering Exynos drm device object only in case of Exynos SoC. So this patch will be replaced with more generic way later. Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 03 11月, 2014 7 次提交
-
-
由 Andrzej Hajda 提交于
During system suspend after connector switch off its dpms field is set to connector previous dpms state. To properly resume dpms field should be set to its actual state (off) before resuming to previous dpms state. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Before DPMS off driver disables vblank. It should be balanced by vblank enable after DPMS on. The patch fixes issue with page_flip ioctl not being able to acquire vblank counter introduced by patch: drm: Always reject drm_vblank_get() after drm_vblank_off() Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HPD events can be generated by components even if drm_dev is not fully initialized, to skip such events kms poll initialization should be performed at the end of load callback followed directly by forced connection detection. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
In case of error during plane initialization load callback incorrectly return success, this patch fixes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
encoder object isn't used anymore so remove it. Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
All KMS objects are destroyed by drm_mode_config_cleanup in proper order so component drivers should not care about it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Initialization of vblank with MAX_CRTC caused attempts to disabling vblanks for non-existing crtcs in case drm used fewer crtcs. The patch fixes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 24 9月, 2014 1 次提交
-
-
由 Daniel Vetter 提交于
v2: Don't forget git add, noticed by David. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Acked-by: NDavid Herrmann <dh.herrmann@gmail.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 20 9月, 2014 3 次提交
-
-
由 Andrzej Hajda 提交于
The patch replaces legacy functions drm_plane_init() / drm_crtc_init() with drm_universal_plane_init() and drm_crtc_init_with_planes(). It allows to replace fake primary plane with the real one. Additionally the patch leaves cleanup of crtcs to core, this way planes and crtcs are cleaned in correct order. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
This patch removes DRM_EXYNOS_GEM_MMAP ictrl feature specific to Exynos drm and instead uses drm generic mmap. We had used the interface specific to Exynos drm to do mmap directly, not to use demand paging which maps each page with physical memory at page fault handler. We don't need the specific mmap interface because the drm generic mmap which uses vm offset manager stuff can also do mmap directly. This patch makes a userspace region to be mapped with whole physical memory region allocated by userspace request when mmap system call is requested. Changelog v2: - do not set VM_IO, VM_DONTEXPEND and VM_DONTDUMP. These flags were already set by drm_gem_mmap - do not include <linux/anon_inodes.h>, which isn't needed anymore. Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
This interface and relevant codes aren't used anymore. Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 19 9月, 2014 27 次提交
-
-
由 Joonyoung Shim 提交于
From fimd driver and vidi driver, dev->irq_enabled and dev->vblank_disable_allowed are set and also mixer needs them even if missed. It's duplicated so set them when loads drm driver. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
During component removal driver should unregister connector. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
During component removal driver should unregister connector. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
During component removal it should unregister connector and optionally detach the panel. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
During component unbind connector should be unregistered. Also DSI host should be unregistered after KMS cleanup. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
In case drm_framebuffer_init fails exynos_fb should be freed before returning an error. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
exynos_gem_obj is used by exynos_drm_fbdev_destroy so it cannot be destroyed before calling the latter. exynos_gem_obj will be destroyed anyway by exynos_drm_fbdev_destroy->...->exynos_drm_fb_destroy. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Since components have their own cleanup routines calling drm_mode_config_cleanup before component_unbind_all causes errors due to double free of KMS objects. The patch fixes it by changing de-initialization order. Now it is exactly opposite to init order. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
On ipp subsystem removal list of ipp drivers is traversed and their members are deleted. To do it properly safe version of list_for_each* should be used. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
Update Exynos's DRM driver to use component match support rater than add_components. Changelog v2: - release devices and drivers if failed. - change compare_of to compare_dev. Signed-off-by: NInki Dae <inki.dae@samsung.com> Tested-by: NAndrzej Hajda <a.hajda@samsung.com>
-
由 Andrzej Hajda 提交于
Process should not have access to ipp nodes created by another process. The patch adds necessary checks. It also simplifies lookup for command node. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Since file pointer is preserved in c_node passing it as argument in node functions is redundant. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
FIMC in default mode of operation uses only one input buffer, but the driver used also second buffer, as a result only the first frame was processed correctly. The patch fixes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
The patch removes redundant checks, redundant HW reads and simplifies code. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
The patch removes redundant H/W activation. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Overflow bits shall be cleared by H/W. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Events were removed only during stop command, as a result there were memory leaks if program prematurely exited. This patch fixes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Memory shouldn't be freed when hardware is still running. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Type casting should be avoided if possible. In case of work_struct it can be simply replaced by reference to member field. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
The nodes should be removed before removing command node. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
The patch introduces ipp_clean_mem_nodes function which replaces redundant code. Additionally memory node function definitions are moved up to increase its visibility. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
In case of allocation errors some already allocated buffers were not freed. The patch fixes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Since command node have file pointer dev field became useless. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
On file close driver should remove only command nodes created via this file. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Command node should contain file reference to distinguish commands created by different processes. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
All pending works should be canceled prior to its removal. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
PM callbacks in ipp core do nothing, so the patch removes it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-