Like the MPC8610 HPCD, the P1022DS ASoC DMA driver probes on individual DMA
channel nodes, so the DMA controller nodes' compatible string must be
listed in p1022_ds_ids[] to work.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The first global-utilities node might not contain the rstcr
property, so we should search all the nodes
Signed-off-by: NMatthew McClintock <msm@freescale.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

There exists a four line chunk of code, which when configured for
64 bit address space, can incorrectly set certain page flags during
the TLB creation.  It turns out that this is code which isn't used,
but might still serve a purpose.  Since it isn't obvious why it exists
or why it causes problems, the below description covers both in detail.

For powerpc bootstrap, the physical memory (at most 768M), is mapped
into the kernel space via the following path:

MMU_init()
    |
    + adjust_total_lowmem()
            |
            + map_mem_in_cams()
                    |
                    + settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);

On settlbcam(), the kernel will create TLB entries according to the flag,
PAGE_KERNEL_X.

settlbcam()
{
        ...
        TLBCAM[index].MAS1 = MAS1_VALID
                        | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
                                ^
			These entries cannot be invalidated by the
			kernel since MAS1_IPROT is set on TLB property.
        ...
        if (flags & _PAGE_USER) {
           TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
           TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
        }

For classic BookE (flags & _PAGE_USER) is 'zero' so it's fine.
But on boards like the the Freescale P4080, we want to support 36-bit
physical address on it. So the following options may be set:

CONFIG_FSL_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y

As a result, boards like the P4080 will introduce PTE format as Book3E.
As per the file: arch/powerpc/include/asm/pgtable-ppc32.h

  * #elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
  * #include <asm/pte-book3e.h>

So PAGE_KERNEL_X is __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX) and the
book3E version of _PAGE_KERNEL_RWX is defined with:

  (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY | _PAGE_BAP_SX)

Note the _PAGE_BAP_SR, which is also defined in the book3E _PAGE_USER:

  #define _PAGE_USER        (_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */

So the possibility exists to wrongly assign the user MAS3_U<RWX> bits
to kernel (PAGE_KERNEL_X) address space via the following code fragment:

        if (flags & _PAGE_USER) {
           TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
           TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
        }

Here is a dump of the TLB info from Simics with the above code present:
------
L2 TLB1
                                            GT                   SSS UUU V I
 Row  Logical           Physical            SS TLPID  TID  WIMGE XWR XWR F P   V
----- ----------------- ------------------- -- ----- ----- ----- --- --- - -   -
  0   c0000000-cfffffff 000000000-00fffffff 00     0     0   M   XWR XWR 0 1   1
  1   d0000000-dfffffff 010000000-01fffffff 00     0     0   M   XWR XWR 0 1   1
  2   e0000000-efffffff 020000000-02fffffff 00     0     0   M   XWR XWR 0 1   1

Actually this conditional code was used for two legacy functions:

  1: support KGDB to set break point.
     KGDB already dropped this; now uses its core write to set break point.

  2: io_block_mapping() to create TLB in segmentation size (not PAGE_SIZE)
     for device IO space.
     This use case is also removed from the latest PowerPC kernel.

However, there may still be a use case for it in the future, like
large user pages, so we can't remove it entirely.  As an alternative,
we match on all bits of _PAGE_USER instead of just any bits, so the
case where just _PAGE_BAP_SR is set can't sneak through.

With this done, the TLB appears without U having XWR as below:

-------
L2 TLB1
                                            GT                   SSS UUU V I
 Row  Logical           Physical            SS TLPID  TID  WIMGE XWR XWR F P   V
----- ----------------- ------------------- -- ----- ----- ----- --- --- - -   -
  0   c0000000-cfffffff 000000000-00fffffff 00     0     0   M   XWR     0 1   1
  1   d0000000-dfffffff 010000000-01fffffff 00     0     0   M   XWR     0 1   1
  2   e0000000-efffffff 020000000-02fffffff 00     0     0   M   XWR     0 1   1
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds support for MPC8308 P1M board.
Supported devices:
 DUART
 Dual Ethernet
 NOR flash
 Both I2C controllers
 USB in peripheral mode
 PCI Express
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

When we do an mpic_reset_core we need to make sure the dcache is flushed.
Signed-off-by: NMatthew McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Make kexec_down_cpus atmoic since it will be incremented by all cores as
they are coming down.

Remove duplicate calls to mpc85xx_smp_kexec_down, now it's called by the
crash and normal kexec pathway only once.

Increase the timeout to wait for other cores to shutdown.
Signed-off-by: NMatthew McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We no longer need to call this explicitly as a generic version is called
by default.
Signed-off-by: NMatthew McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Right now just the kexec crash pathway turns turns off the interrupts.
Pull that out and make a generic version for use elsewhere
Signed-off-by: NMatthew McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Register the __init and __exit functions in the PowerPC Book-E Watchdog
driver as module entry/exit functions, and modify the Kconfig entry.

Add a .release method for the PowerPC Book-E Watchdog driver, so that the
watchdog is disabled when the driver is closed.

Loosely based on original code from Jiang Yutang <b14898@freescale.com>.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Export the global variable 'ppc_tb_freq', so that modules (like the Book-E
watchdog driver) can use it.  To maintain consistency, ppc_proc_freq is
changed to a GPL-only export.  This is okay, because any module that needs
this symbol should be an actual Linux driver, which must be GPL-licensed.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The following commit broke 83xx because it assumed the 83xx platforms
exposed the "IMMR" address in BAR0 like the 85xx/86xx/QoriQ devices do:

commit 3da34aae
Author: Kumar Gala <galak@kernel.crashing.org>
Date:   Tue May 12 15:51:56 2009 -0500

    powerpc/fsl: Support unique MSI addresses per PCIe Root Complex

However that is not true, so we have to search through the inbound
window settings on 83xx to find which one matches the IMMR address to
determine its PCI address.
Reported-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The default for llseek is changing, so we need
explicit operations everywhere.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Current firmware only allows us to send IRQs to the first processor or
all processors. We currently check to see if the passed in mask is equal
to the all_mask, but the firmware is only considering whether the
request is for the equivalent of the possible_mask. Thus, we think the
request is for some subset of CPUs and only assign IRQs to the first CPU
(on systems without irqbalance running) as evidenced by
/proc/interrupts. By using possible_mask instead, we account for this
and proper interleaving of interrupts occurs.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use set_dma_ops and remove unused oddly-named temp pointer sd.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

While looking at some code paths I came across this code that zeros
memory then copies over the entire length.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Release the TCE table as the XXX suggests, except on FW_FEATURE_ISERIES,
where the tables are allocated globally and reused.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The kernel doc for device_register (and device_initialize) very clearly
state to call put_device not kfree after calling, even on error.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The current check is wrong because it does not take the DMA offset intot
account, and in the case of a driver which doesn't actually support
64bits would falsely report that device as working.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The table offset is in entries, each of which imply a dma address of
an IOMMU page.

Also, we should check the device can reach the whole IOMMU table.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

BUID_HI and BUID_LO are used to pass data to call_rtas, which expects
ints or u32s. But the macro doesn't cast the return, so the result is
still u64. Use the upper_32_bits and lower_32_bits macros that have been
added to kernel.h.

Found by getting printf format errors trying to debug print the args, no
actual code change for 64 bit kernels where the macros are actually
used.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NLinas Vepstas <linasvepstas@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The function has an unsigned return type, but returns a negative constant
to indicate an error condition.  The result of calling the function is
always stored in a variable of type (signed) int, and thus unsigned can be
dropped from the return type.

A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@exists@
identifier f;
constant C;
@@

 unsigned f(...)
 { <+...
*  return -C;
 ...+> }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In this case, a device_node structure is stored in another structure that
is then freed without first decrementing the reference count of the
device_node structure.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression x;
identifier f;
position p1,p2;
@@

x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...);
... when != of_node_put(x)
kfree@p2(x)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@
cocci.print_main("call",p1)
cocci.print_secs("free",p2)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Enable partition migration in the kernel.  To do this a new sysfs file,
/sys/kernel/mobility/migration, is created.  In order to initiate a migration
the stream id (generated by the HMC managing the system) is written to this
file.

After a migration occurs, and what is the majority of this code, the device
tree needs to be updated for the new system the partition is running on. This
is done via the ibm,update-nodes and ibm,update-properties rtas calls which
return information regarding which nodes and properties of the device tree
are to be added/removed/updated.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Export the rtas_ibm_suspend_me() routine.  This is needed to perform
partition migration in the kernel.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Export routines associated with adding and removing device tree nodes on
pseries needed for device tree updating.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/built-in.o:(.toc1+0x18): undefined reference to `__early_start'

This is due to the 85xx/smp.c not handling the 64-bit side properly.  We
need to set the entry point for secondary cores on ppc64e to
generic_secondary_smp_init instead of __early_start that we due on ppc32.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* 'hwpoison-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
  HWPOISON: Stop shrinking at right page count
  HWPOISON: Report correct address granuality for AO huge page errors
  HWPOISON: Copy si_addr_lsb to user
  page-types.c: fix name of unpoison interface

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  elevator: fix oops on early call to elevator_change()

* 'for-linus' of git://neil.brown.name/md:
  md: check return code of read_sb_page
  md/raid1: minor bio initialisation improvements.
  md/raid1:  avoid overflow in raid1 resync when bitmap is in use.

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: don't drop handle reference on unload
  drm/ttm: Fix two race conditions + fix busy codepaths

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - fix runtime PM related deadlock
  Input: joydev - fix JSIOCSAXMAP ioctl
  Input: uinput - setup MT usage during device creation

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: properly account for reclaimed inodes

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (37 commits)
  V4L/DVB: v4l: radio: si470x: fix unneeded free_irq() call
  V4L/DVB: v4l: videobuf: prevent passing a NULL to dma_free_coherent()
  V4L/DVB: ir-core: Fix null dereferences in the protocols sysfs interface
  V4L/DVB: v4l: s5p-fimc: Fix 3-planar formats handling and pixel offset error on S5PV210 SoCs
  V4L/DVB: v4l: s5p-fimc: Fix return value on probe() failure
  V4L/DVB: uvcvideo: Restrict frame rates for Chicony CNF7129 webcam
  V4L/DVB: uvcvideo: Fix support for Medion Akoya All-in-one PC integrated webcam
  V4L/DVB: ivtvfb: prevent reading uninitialized stack memory
  V4L/DVB: cx25840: Fix typo in volume control initialization: 65335 vs. 65535
  V4L/DVB: v4l: mem2mem_testdev: add missing release for video_device
  V4L/DVB: v4l: mem2mem_testdev: fix errorenous comparison
  V4L/DVB: mt9v022.c: Fixed compilation warning
  V4L/DVB: mt9m111: added current colorspace at g_fmt
  V4L/DVB: mt9m111: cropcap and s_crop check if type is VIDEO_CAPTURE
  V4L/DVB: mx2_camera: fix a race causing NULL dereference
  V4L/DVB: tm6000: bugfix data handling
  V4L/DVB: gspca - sn9c20x: Bad transfer size of Bayer images
  V4L/DVB: videobuf-dma-sg: set correct size in last sg element
  V4L/DVB: cx231xx: Avoid an OOPS when card is unknown (card=0)
  V4L/DVB: dvb: fix smscore_getbuffer() logic
  ...

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  of/i2c: Fix module load order issue caused by of_i2c.c
  i2c: Fix checks which cause legacy suspend to never get called
  i2c-pca: Fix waitforcompletion() return value
  i2c: Fix for suspend/resume issue
  i2c: Remove obsolete cleanup for clientdata

When proc_doulongvec_minmax() is used with an array of longs, and no
min/max check requested (.extra1 or .extra2 being NULL), we dereference a
NULL pointer for the second element of the array.

Noticed while doing some changes in network stack for the "16TB problem"

Fix is to not change min & max pointers in __do_proc_doulongvec_minmax(),
so that all elements of the vector share an unique min/max limit, like
proc_dointvec_minmax().

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add Samsung S5P series FIMC(Camera Interface) maintainers.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>