Commit cc7cc02b ("PCI: Query platform firmware for device power
state") augmented struct pci_platform_pm_ops with a ->get_state hook and
implemented it for acpi_pci_platform_pm, the only pci_platform_pm_ops
existing till v4.7.

However v4.8 introduced another pci_platform_pm_ops for Intel Mobile
Internet Devices with commit 5823d089 ("x86/platform/intel-mid: Add
Power Management Unit driver").  It is missing the ->get_state hook,
which is fatal since pci_set_platform_pm() enforces its presence.  Andy
Shevchenko reports that without the present commit, such a device
"crashes without even a character printed out on serial console and
reboots (since watchdog)".

Retrofit mid_pci_platform_pm with the missing callback to fix the
breakage.
Acked-and-tested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: cc7cc02b ("PCI: Query platform firmware for device power state")
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: http://lkml.kernel.org/r/7c1567d4c49303a4aada94ba16275cbf56b8976b.1477221514.git.lukas@wunner.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

There's no module user of this.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b8cf9b508c89d3c69d20a61ff540e666d4243747.1477374931.git.lukas@wunner.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

On Penwell SRAM has to be powered on, otherwise it prevents booting.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ca22312d ("x86/platform/intel-mid: Extend PWRMU to support Penwell")
Link: http://lkml.kernel.org/r/20160908103232.137587-2-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  ca22312d ("x86/platform/intel-mid: Extend PWRMU to support Penwell")

... enabled the PWRMU driver on platforms based on Intel Penwell, but
unfortunately this is not enough.

Add Intel Penwell ID to pci-mid.c driver as well. To avoid confusion in the
future add a comment to both drivers.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ca22312d ("x86/platform/intel-mid: Extend PWRMU to support Penwell")
Link: http://lkml.kernel.org/r/20160908103232.137587-1-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Tell SCU that we are about powering off the device.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160907123955.21228-1-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

On some firmwares we have to tell how exactly we want the command to be
proceeded. The default case, based on the official BSP code, is to run it
immediately.

This appears to be a safer approach based on the documentation.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1471530580-94247-1-git-send-email-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.

One module.h was converted to moduleparam.h since the file had
multiple module_param() in it, and another file had an instance of
MODULE_DEVICE_TABLE deleted, since that is a no-op when builtin.

Finally, the 32 bit build coverage of olpc_ofw revealed a couple
implicit includes, which were pretty self evident to fix based on
what gcc was complaining about.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-6-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Intel Penwell is one of the first SoCs in Intel MID series. It has slightly
older version of PWRMU IP, though it is compatible with one found on Intel
Tangier. Since we are not using (yet) any advanced stuff in the driver we may
safely re-use what it's done for Intel Tangier for now.

Extend PWRMU driver to support Intel Penwell by adding PCI ID and re-using
existing ->set_initial_state() function.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1467749348-100518-2-git-send-email-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add Power Management Unit driver to handle power states of South Complex
devices on Intel Tangier. In the future it might be expanded to cover North
Complex devices as well.

With this driver the power state of the host controllers such as SPI, I2C,
UART, eMMC, and DMA would be managed.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/1465928985-12113-1-git-send-email-andriy.shevchenko@linux.intel.com
[ Minor readability edits. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>