This patch provides the iommu support for OMAP4 co-processors.
Signed-off-by: NHari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

This patch includes changes to omap3-iommu.c file to make it generic
for all OMAPs. Renamed omap3-iommu.c to omap-iommu.c

[Hiroshi DOYU: Remove unnecessary "iommu-y" in Makefile]
Signed-off-by: NHari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error
  [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error
  [SCSI] scsi_debug: virtual_gb ignores sector_size
  [SCSI] libiscsi: regression: fix header digest errors
  [SCSI] fix locking around blk_abort_request()
  [SCSI] advansys: fix narrow board error path

commit 672917dc ("cpuidle: menu governor: reduce latency on exit")
added an optimization, where the analysis on the past idle period moved
from the end of idle, to the beginning of the new idle.

Unfortunately, this optimization had a bug where it zeroed one key
variable for new use, that is needed for the analysis.  The fix is
simple, zero the variable after doing the work from the previous idle.

During the audit of the code that found this issue, another issue was
also found; the ->measured_us data structure member is never set, a
local variable is always used instead.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Corrado Zoccolo <czoccolo@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://neil.brown.name/md:
  md: restore ability of spare drives to spin down.
  md/raid6: Fix raid-6 read-error correction in degraded state

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix compilation after 16bit state locking changes
  pcmcia: order userspace suspend and resume requests
  pcmcia: avoid pccard_validate_cis failure in resume callpath

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  blk-cgroup: Fix an RCU warning in blkiocg_create()
  blk-cgroup: Fix RCU correctness warning in cfq_init_queue()
  drbd: don't expose failed local READ to upper layers

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/ttm: Remove the ttm_bo_block_reservation() function.
  drm/ttm: Remove some leftover debug messages.
  drm/radeon: async event synchronization for drmWaitVblank

Move initialization of the virtio framework before the initialization of
mtd, so that block2mtd can be used on virtio-based block devices.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644Signed-off-by: NStijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix RCU issues in the NFSv4 delegation code
  NFSv4: Fix the locking in nfs_inode_reclaim_delegation()

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x
  ACPI: fix acpi_hest_firmware_first_pci() caused oops
  sbshc: acpi_device_class "smbus_host_controller" too long
  power_meter: acpi_device_class "power_meter_resource" too long
  acpi_pad: "processor_aggregator" name too long
  PNP: don't check for conflicts with bridge windows
  ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads
  PNPACPI: compute Address Space length rather than using _LEN
  ACPI: silence kmemcheck false positive

* 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB: pxa_camera: move fifo reset direct before dma start
  V4L/DVB: video: testing unsigned for less than 0
  V4L/DVB: mx1-camera: compile fix
  V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer 	dereference"
  V4L/DVB: ngene: Workaround for stuck DiSEqC pin
  V4L/DVB: saa7146: fix regression of the av7110/budget-av driver
  V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1
  V4L/DVB: feature-removal: announce videotext.h removal
  V4L/DVB: V4L - vpfe capture - fix for kernel crash
  V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver
  V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver
  V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration
  V4L/DVB: saa7146: fix up bytesperline if it is an impossible value
  V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails
  V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci
  V4L/DVB: omap24xxcam: potential buffer overflow

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: create rcu_my_thread_group_empty() wrapper
  memcg: css_id() must be called under rcu_read_lock()
  cgroup: Check task_lock in task_subsys_state()
  sched: Fix an RCU warning in print_task()
  cgroup: Fix an RCU warning in alloc_css_id()
  cgroup: Fix an RCU warning in cgroup_path()
  KEYS: Fix an RCU warning in the reading of user keys
  KEYS: Fix an RCU warning

Some time ago we stopped the clean/active metadata updates
from being written to a 'spare' device in most cases so that
it could spin down and say spun down.  Device failure/removal
etc are still recorded on spares.

However commit 51d5668c broke this 50% of the time,
depending on whether the event count is even or odd.
The change log entry said:

   This means that the alignment between 'odd/even' and
    'clean/dirty' might take a little longer to attain,

how ever the code makes no attempt to create that alignment, so it
could take arbitrarily long.

So when we find that clean/dirty is not aligned with odd/even,
force a second metadata-update immediately.  There are already cases
where a second metadata-update is needed immediately (e.g. when a
device fails during the metadata update).  We just piggy-back on that.
Reported-by: NJoe Bryant <tenminjoe@yahoo.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

Fix: Raid-6 was not trying to correct a read-error when in
singly-degraded state and was instead dropping one more device, going to
doubly-degraded state. This patch fixes this behaviour.
Tested-by: NJanos Haar <janos.haar@netcenter.hu>
Signed-off-by: NGabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com>
Reported-by: NJanos Haar <janos.haar@netcenter.hu>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

with CONFIG_PROVE_RCU=y, a warning can be triggered:

  # mount -t cgroup -o blkio xxx /mnt
  # mkdir /mnt/subgroup

...
kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection!
...

To fix this, we avoid caling css_depth() here, which is a bit simpler
than the original code.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', 'bugzilla-15903' and 'misc-2.6.34' into release

It's unused and buggy in its current form, since it can place a bo
in the reserved state without removing it from lru lists.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Bring radeon up to speed with the async event synchronization for
drmWaitVblank. See c9a9c5e0 for
more information. Without this patch event never get delivered
to userspace client.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move the fifo reset from pxa_camera_start_capture to pxa_camera_irq direct
before the dma start after an end of frame interrupt to prevent images from
shifting because of old data at the begin of the frame.
Signed-off-by: NStefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Tested-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

soc_mbus_bytes_per_line() returns -EINVAL on error but we store it in an
unsigned int so the test for less than zero doesn't work.  I think it
always returns "small" positive values so we can just cast it to int
here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This fixes a regression of

	7d58289f (mx1: prefix SOC specific defines with MX1_ and deprecate old names)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Never call dvb_frontend_detach if we failed to attach a frontend. This fixes
the following oops, which will be triggered by a missing stv090x module:

[    8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[    8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29
[    8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    8.562047] DVB: Unable to find symbol stv090x_attach()
[    8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac
[    8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core]

Ref http://bugs.debian.org/575207Signed-off-by: NBjørn Mork <bjorn@mork.no>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Send one DiSEqC byte to make sure that the pin is set to low level.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Reviewed-by: NManu Abraham <abraham.manu@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix
regression where v4l2_device was registered too late) caused a new
regression in the av7110 driver.

Reverted the old fix and fixed the problem in the mxb driver instead.
Tested on mxb and budget-av cards.

The real problem is that the saa7146 framework has separate probe()
and attach() driver callbacks which should be rolled into one. This
is now done for the mxb driver, but others should do the same. Lack
of hardware makes this hard to do, though. I hope to get hold of some
hexium cards and then I can try to improve the framework to prevent
this from happening again.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As part of upstream merge, set_params() function was removed from isif.c.
This requires removal of BUG_ON() and check for set_params ptr in
vpfe_capture.c. Without this kernel crash dump is seen while bootup on DM365

Also made following changes:-

 1) converted error messages to debug messages since it is not right to flood
    the console with error messages for user mistakes.
 2) returns -EINVAL if ioctl is not supported
Signed-off-by: NMuralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The 0461:0815 camera is spca561 based not spca508
Signed-off-by: NJohn Ellson <john.ellson@comcast.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The 046d:08da usb id shouldn't be associated with the stv06xx driver as they're
not compatible with each other.
This fixes a bug where Quickcam Messenger cams fail to use its proper driver
(gspca-zc3xx), rendering the camera inoperable.
Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Tested-by: NGabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
CC: Brian Johnson <brijohn@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

xawtv using DGA on a Radeon graphics card provides bogus
values to S_FBUF, which will then screw up overlay video:

https://bugs.launchpad.net/ubuntu/+source/xawtv/+bug/499734

This fixes the bytesperline value if it is off completely.
Signed-off-by: NMichael Hunold <michael@mihu.de>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes a bug in vpfe_probe() that doesn't call mutex_unlock() if memory
allocation for ccdc_cfg fails. See also the smatch warning report from Dan
Carpenter that shows this as an issue.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMuralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The previous loop goes until last == VIDEO_MAX_FRAME, so this could
potentially go one past the end of the loop.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add Dell Studio models (1558, 1557, 1555) to the 'set_sci_en_on_resume'
list to fix hang on resume.

BugLink: http://bugs.launchpad.net/bugs/553498Signed-off-by: NKamal Mostafa <kamal@canonical.com>
Acked-by: NAlex Chiang <achiang@canonical.com>
Cc: stable@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

Some RCU-lockdep splat repairs need to know whether they are running
in a single-threaded process.  Unfortunately, the thread_group_empty()
primitive is defined in sched.h, and can induce #include hell.  This
commit therefore introduces a rcu_my_thread_group_empty() wrapper that
is defined in rcupdate.c, thus avoiding the need to include sched.h
everywhere.
Signed-off-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Defconfig update
  microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macros
  microblaze: Fix consistent-sync code
  microblaze: Define correct L1_CACHE_SHIFT value
  microblaze: cpuinfo shows cache line length
  microblaze: Fix kmalloc alignment on non-coherent DMA platforms
  microblaze: Fix typo fault in cache code
  microblaze: Fix consistent code
  microblaze: pci-dma: use include/linux/dma-mapping.h
  microblaze: page.h: Remove get_user_page and free_user_page
  microblaze: Remove "cache" optimized copy_page function
  microblaze: invoke oom-killer from page fault
  microblaze: fix divide by zero exception message
  microblaze: Add isa_dma_bridge_buggy to dma.h
  microblaze: Remove ancient code
  microblaze: Quiet section mismatch warnings for MMU version
  microblaze: Quiet section mismatch warnings
  microblaze: Fix IRQ entry/exit ftracing
  microblaze: resource/PCI: align functions now return start of resource
  microblaze: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs