Fix:
/tmp/ccvoZ6h8.s: Assembler messages:
/tmp/ccvoZ6h8.s:284: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:881: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:1087: Warning: register range not in ascending order

by ensuring that we have temporary variables placed into specific
registers.  Reorder the code a bit to allow the resulting assembly
to be slightly more optimal.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We were clearing out the multicast filter whenever the interface was
upped, and not setting the mode bits correctly.  This can cause
problems if there are any multicast addresses already set at this
point, or if ALLMULTI was set.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this the compiler can (and does) optimize register reads away
from within loops, and other such optimizations.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lennert stated that he has been short on time lately. Since I'm maintaining
the ep93xx core stuff, I'm willing to also take over maintaining the Ethernet
driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NMika Westerberg <mika.westerberg@iki.fi>
Acked-by: NLennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We assume that transhdrlen is positive on the first fragment
which is wrong for raw packets. So we don't add exthdrlen to the
packet size for raw packets. This leads to a reallocation on IPsec
because we have not enough headroom on the skb to place the IPsec
headers. This patch fixes this by adding exthdrlen to the packet
size whenever the send queue of the socket is empty. This issue was
introduced with git commit 1470ddf7 (inet: Remove explicit write
references to sk/inet in ip_append_data)
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem

In commit 8d8fc29d
(netpoll: disable netpoll when enslave a device), we automatically
disable netpoll when the underlying device is being enslaved,
we also need to prevent people from setuping netpoll on
devices that are already enslaved.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 2c8cec5c (ipv4: Cache learned PMTU information in inetpeer)
added some racy peer->pmtu_expires accesses.

As its value can be changed by another cpu/thread, we should be more
careful, reading its value once.

Add peer_pmtu_expired() and peer_pmtu_cleaned() helpers
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each eTSEC device should own localized filer table.
Signed-off-by: NJiajun Wu <b06378@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We use priv->mutex to avoid race conditions between chswitch_done()
and mac_channel_switch(), when marking channel switch in
progress. But chswitch_done() can be called in atomic context
from rx_csa() or with mutex already taken from commit_rxon().

To fix remove mutex from chswitch_done() and use atomic bitops
for marking channel switch pending.

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Ignacy reports that sometimes after leaving an IBSS
joining a new one didn't work because there still
were stations on the list. He fixed it by flushing
stations when attempting to join a new IBSS, but
this shouldn't be happening in the first case. When
I looked into it I saw a race condition in teardown
that could cause stations to be added after flush,
and thus cause this situation. Ignacy confirms that
after applying my patch he hasn't seen this happen
again.
Reported-by: NIgnacy Gawedzki <i@lri.fr>
Debugged-by: NIgnacy Gawedzki <i@lri.fr>
Tested-by: NIgnacy Gawedzki <i@lri.fr>
Cc: stable@kernel.org
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

During channge channel, tx power will not send to uCode, the tx power command
should send after scan complete. but should also can send after RXON command.

Stable fix identified by Stanislaw Gruszka <sgruszka@redhat.com>.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We may write 4 byte too much when we reinitialize the anti replay
window in the replay advance functions. This patch fixes this by
adjusting the last index of the initialization loop.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When SR-IOV is enabled, i350 devices fail to pass traffic. This is due to
the driver attempting to enable RSS on the PF device, which is not
supported by the i350.

When max_vfs is specified on an i350 adapter, set the number of RSS queues
to 1.

This issue affects 2.6.39 as well.

CC: stable@kernel.org
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When one of the SSID's length passed in a scan or sched_scan request
is larger than 255, there will be an overflow in the u8 that is used
to store the length before checking.  This causes the check to fail
and we overrun the buffer when copying the SSID.

Fix this by checking the nl80211 attribute length before copying it to
the struct.

This is a follow up for the previous commit
208c72f4, which didn't fix the problem
entirely.
Reported-by: NIdo Yariv <ido@wizery.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In the case we fail to allocate a new skb, the old skb should
be resubmitted unmodified.

Fixes bug introduced in a9e12869.
Signed-off-by: NMike McCormack <mikem@ring3k.org>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Should pass along packet if there's no CRC and no hardware error.
Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This reverts commit 1d38c16c.

The mac80211 maintainer raised complaints about abuse of the CSA stop
reason, and about whether this patch actually serves its intended
purpose at all.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Frank Blaschka reported :
<quote>
  During heavy network load we turn off/on cpus.
  Sometimes this causes a stall on the network device.
  Digging into the dump I found out following:

  napi is scheduled but does not run. From the I/O buffers
  and the napi state I see napi/rx_softirq processing has stopped
  because the budget was reached. napi stays in the
  softnet_data poll_list and the rx_softirq was raised again.

  I assume at this time the cpu offline comes in,
  the rx softirq is raised/moved to another cpu but napi stays in the
  poll_list of the softnet_data of the now offline cpu.

  Reviewing dev_cpu_callback (net/core/dev.c) I did not find the
  poll_list is transfered to the new cpu.
</quote>

This patch is a straightforward implementation of Frank suggestion :

Transfert poll_list and trigger NET_RX_SOFTIRQ on new cpu.
Reported-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Tested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like in commit 0972ddb2 (provide cow_metrics() methods to blackhole
dst_ops), we must provide a cow_metrics for bridges fake_dst_ops as
well.

This fixes a regression coming from commits 62fa8a84 (net: Implement
read-only protection and COW'ing of metrics.) and 33eb9873 (bridge:
initialize fake_rtable metrics)

ip link set mybridge mtu 1234
-->
[  136.546243] Pid: 8415, comm: ip Tainted: P 
2.6.39.1-00006-g40545b7 #103 ASUSTeK Computer Inc.         V1Sn 
        /V1Sn
[  136.546256] EIP: 0060:[<00000000>] EFLAGS: 00010202 CPU: 0
[  136.546268] EIP is at 0x0
[  136.546273] EAX: f14a389c EBX: 000005d4 ECX: f80d32c0 EDX: f80d1da1
[  136.546279] ESI: f14a3000 EDI: f255bf10 EBP: f15c3b54 ESP: f15c3b48
[  136.546285]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  136.546293] Process ip (pid: 8415, ti=f15c2000 task=f4741f80 
task.ti=f15c2000)
[  136.546297] Stack:
[  136.546301]  f80c658f f14a3000 ffffffed f15c3b64 c12cb9c8 f80d1b80 
ffffffa1 f15c3bbc
[  136.546315]  c12da347 c12d9c7d 00000000 f7670b00 00000000 f80d1b80 
ffffffa6 f15c3be4
[  136.546329]  00000004 f14a3000 f255bf20 00000008 f15c3bbc c11d6cae 
00000000 00000000
[  136.546343] Call Trace:
[  136.546359]  [<f80c658f>] ? br_change_mtu+0x5f/0x80 [bridge]
[  136.546372]  [<c12cb9c8>] dev_set_mtu+0x38/0x80
[  136.546381]  [<c12da347>] do_setlink+0x1a7/0x860
[  136.546390]  [<c12d9c7d>] ? rtnl_fill_ifinfo+0x9bd/0xc70
[  136.546400]  [<c11d6cae>] ? nla_parse+0x6e/0xb0
[  136.546409]  [<c12db931>] rtnl_newlink+0x361/0x510
[  136.546420]  [<c1023240>] ? vmalloc_sync_all+0x100/0x100
[  136.546429]  [<c1362762>] ? error_code+0x5a/0x60
[  136.546438]  [<c12db5d0>] ? rtnl_configure_link+0x80/0x80
[  136.546446]  [<c12db27a>] rtnetlink_rcv_msg+0xfa/0x210
[  136.546454]  [<c12db180>] ? __rtnl_unlock+0x20/0x20
[  136.546463]  [<c12ee0fe>] netlink_rcv_skb+0x8e/0xb0
[  136.546471]  [<c12daf1c>] rtnetlink_rcv+0x1c/0x30
[  136.546479]  [<c12edafa>] netlink_unicast+0x23a/0x280
[  136.546487]  [<c12ede6b>] netlink_sendmsg+0x26b/0x2f0
[  136.546497]  [<c12bb828>] sock_sendmsg+0xc8/0x100
[  136.546508]  [<c10adf61>] ? __alloc_pages_nodemask+0xe1/0x750
[  136.546517]  [<c11d0602>] ? _copy_from_user+0x42/0x60
[  136.546525]  [<c12c5e4c>] ? verify_iovec+0x4c/0xc0
[  136.546534]  [<c12bd805>] sys_sendmsg+0x1c5/0x200
[  136.546542]  [<c10c2150>] ? __do_fault+0x310/0x410
[  136.546549]  [<c10c2c46>] ? do_wp_page+0x1d6/0x6b0
[  136.546557]  [<c10c47d1>] ? handle_pte_fault+0xe1/0x720
[  136.546565]  [<c12bd1af>] ? sys_getsockname+0x7f/0x90
[  136.546574]  [<c10c4ec1>] ? handle_mm_fault+0xb1/0x180
[  136.546582]  [<c1023240>] ? vmalloc_sync_all+0x100/0x100
[  136.546589]  [<c10233b3>] ? do_page_fault+0x173/0x3d0
[  136.546596]  [<c12bd87b>] ? sys_recvmsg+0x3b/0x60
[  136.546605]  [<c12bdd83>] sys_socketcall+0x293/0x2d0
[  136.546614]  [<c13629d0>] sysenter_do_call+0x12/0x26
[  136.546619] Code:  Bad EIP value.
[  136.546627] EIP: [<00000000>] 0x0 SS:ESP 0068:f15c3b48
[  136.546645] CR2: 0000000000000000
[  136.546652] ---[ end trace 6909b560e78934fa ]---
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In 2.6.27, commit 393e52e3 (packet: deliver VLAN TCI to userspace)
added a small information leak.

Add padding field and make sure its zeroed before copy to user.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SEQ output functions grab the obj->attrib->hb_spinlock lock of
sub-objects found in the hash traversal.  These locks are in a different
realm than the one used for the irias_objects hash table itself.

So put the latter into it's own lockdep class.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This interface uses a temporary buffer, but for no real reason.
And now can generate warnings like:

net/sched/sch_generic.c: In function dev_watchdog
net/sched/sch_generic.c:254:10: warning: unused variable drivername

Just return driver->name directly or "".
Reported-by: NConnor Hansen <cmdkhh@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same check as for IPv4, also do for IPv6.

(If you passed in a IPv4 sockaddr_in here, the sizeof check
 in the line before would have triggered already though.)
Signed-off-by: NMarcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Setting tx power can be deferred during scan or changing channel.
If after that correct tx power settings will not be sent to device,
we can observe transmission problems and timeouts. Force to send
tx power settings also after partial rxon change, to assure device
always be configured with up-to-date settings.

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=36492

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Avoid queue and run autowakeup_work when device is not present anymore.
That prevent rmmod and device remove crash introduced by:

commit 1c0bcf89
Author: Ivo van Doorn <ivdoorn@gmail.com>
Date:   Sat Apr 30 17:18:18 2011 +0200

    rt2x00: Add autowake support for USB hardware
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes 802.11n stability and performance regression we have
since 2.6.35. It boost performance on my 5GHz N-only network from about
5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz.

These are test results of 5x downloading of approximately 700MB iso
image:

vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110
patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946

This was achieved with NetworkManager configured to do not perform
periodical scans, by configuring constant BSSID. With periodical scans,
after some time, performance downgrade to unpatched driver level, like
in example below:

patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683

However patch still make better here, since similar test on unpatched
driver make link disconnects with below messages after some time:

wlan1: authenticate with 00:23:69:35:d1:3f (try 1)
wlan1: authenticate with 00:23:69:35:d1:3f (try 2)
wlan1: authenticate with 00:23:69:35:d1:3f (try 3)
wlan1: authentication with 00:23:69:35:d1:3f timed out

On 2.6.35 kernel patch helps against connection hangs with messages:

iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload.
iwlagn 0000:20:00.0: On demand firmware reload
iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting

Cc: stable@kernel.org # 2.6.35+
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This reverts commit aac6af55.

Conflicts:

	net/mac80211/key.c

That commit has a race that causes a warning, as documented in the thread
here:

	http://marc.info/?l=linux-wireless&m=130717684914101&w=2Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem

Fix missing semicolon at end of smc91x.c match tabledevice driver.
Also remove unnecessary #ifdef around of_match_table pointer.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netlink message lengths can't be negative, so use unsigned variables.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch fixes a refcount leak of ct objects that may occur if
l4proto->error() assigns one conntrack object to one skbuff. In
that case, we have to skip further processing in nf_conntrack_in().

With this patch, we can also fix wrong return values (-NF_ACCEPT)
for special cases in ICMP[v6] that should not bump the invalid/error
statistic counters.
Reported-by: NZoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Fix crash in nf_nat_csum when mangling packets
in OUTPUT hook where skb->dev is not defined, it is set
later before POSTROUTING. Problem happens for CHECKSUM_NONE.
We can check device from rt but using CHECKSUM_PARTIAL
should be safe (skb_checksum_help).
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The stored cidr values are tried one after anoter. The boolean
condition evaluated to '1' instead of the first stored cidr or
the default host cidr.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

	Fix the IPVS priority in LOCAL_IN hook,
so that SNAT target in POSTROUTING is supported for IPVS
traffic as in 2.6.36 where it worked depending on
module load order.

	Before 2.6.37 we used priority 100 in LOCAL_IN to
process remote requests. We used the same priority as
iptables SNAT and if IPVS handlers are installed before
SNAT handlers we supported SNAT in POSTROUTING for the IPVS
traffic. If SNAT is installed before IPVS, the netfilter
handlers are before IPVS and netfilter checks the NAT
table twice for the IPVS requests: once in LOCAL_IN where
IPS_SRC_NAT_DONE is set and second time in POSTROUTING
where the SNAT rules are ignored because IPS_SRC_NAT_DONE
was already set in LOCAL_IN.

	But in 2.6.37 we changed the IPVS priority for
LOCAL_IN with the goal to be unique (101) forgetting the
fact that for IPVS traffic we should not walk both
LOCAL_IN and POSTROUTING nat tables.

	So, change the priority for processing remote
IPVS requests from 101 to 99, i.e. before NAT_SRC (100)
because we prefer to support SNAT in POSTROUTING
instead of LOCAL_IN. It also moves the priority for
IPVS replies from 99 to 98. Use constants instead of
magic numbers at these places.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Following error is raised (and other similar ones) :

net/ipv4/netfilter/nf_nat_standalone.c: In function ‘nf_nat_fn’:
net/ipv4/netfilter/nf_nat_standalone.c:119:2: warning: case value ‘4’
not in enumerated type ‘enum ip_conntrack_info’

gcc barfs on adding two enum values and getting a not enumerated
result :

case IP_CT_RELATED+IP_CT_IS_REPLY:

Add missing enum values
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>