- 24 3月, 2013 2 次提交
-
-
由 Kent Overstreet 提交于
Just a little convenience macro - main reason to add it now is preparing for immutable bio vecs, it'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: NKent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: Lars Ellenberg <drbd-dev@lists.linbit.com> CC: Jiri Kosina <jkosina@suse.cz> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: Heiko Carstens <heiko.carstens@de.ibm.com> CC: linux-s390@vger.kernel.org CC: Chris Mason <chris.mason@fusionio.com> CC: Steven Whitehouse <swhiteho@redhat.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Kent Overstreet 提交于
Signed-off-by: NKent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: NeilBrown <neilb@suse.de> Acked-by: NNeilBrown <neilb@suse.de>
-
- 02 3月, 2013 30 次提交
-
-
由 Heinz Mauelshagen 提交于
A simple cache policy that writes back all data to the origin. This is used to decommission a dm cache by emptying it. Signed-off-by: NHeinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
A cache policy that uses a multiqueue ordered by recent hit count to select which blocks should be promoted and demoted. This is meant to be a general purpose policy. It prioritises reads over writes. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Add a target that allows a fast device such as an SSD to be used as a cache for a slower device such as a disk. A plug-in architecture was chosen so that the decisions about which data to migrate and when are delegated to interchangeable tunable policy modules. The first general purpose module we have developed, called "mq" (multiqueue), follows in the next patch. Other modules are under development. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NHeinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Add a persistent bitset as a wrapper around dm-array. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Add a transactional array. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
This patch takes advantage of the new bio-prison interface where the memory is now passed in rather than using a mempool in bio-prison. This allows the map function to avoid performing potentially-blocking allocations that could lead to deadlocks: We want to avoid the cell allocation that is done in bio_detain. (The potential for mempool deadlocks still remains in other functions that use bio_detain.) Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Change the dm_bio_prison interface so that instead of allocating memory internally, dm_bio_detain is supplied with a pre-allocated cell each time it is called. This enables a subsequent patch to move the allocation of the struct dm_bio_prison_cell outside the thin target's mapping function so it can no longer block there. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Add dm_btree_walk to iterate through the contents of a btree. This will be used by the dm cache target. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Add a num_write_bios function to struct target. If an instance of a target sets this, it will be queried before the target's mapping function is called on a write bio, and the response controls the number of copies of the write bio that the target will receive. This provides a convenient way for a target to send the same data to more than one device. The new cache target uses this in writethrough mode, to send the data both to the cache and the backing device. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
This patch allows the administrator to reduce the rate at which kcopyd issues I/O. Each module that uses kcopyd acquires a throttle parameter that can be set in /sys/module/*/parameters. We maintain a history of kcopyd usage by each module in the variables io_period and total_period in struct dm_kcopyd_throttle. The actual kcopyd activity is calculated as a percentage of time equal to "(100 * io_period / total_period)". This is compared with the user-defined throttle percentage threshold and if it is exceeded, we sleep. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
This patch introduces enhanced message support that allows the device-mapper core to recognise messages that are common to all devices, and for messages to return data to userspace. Core messages are processed by the function "message_for_md". If the device mapper doesn't support the message, it is passed to the target driver. If the message returns data, the kernel sets the flag DM_MESSAGE_OUT_FLAG. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Device-mapper ioctls receive and send data in a buffer supplied by userspace. The buffer has two parts. The first part contains a 'struct dm_ioctl' and has a fixed size. The second part depends on the ioctl and has a variable size. This patch recognises the specific ioctls that do not use the variable part of the buffer and skips allocating memory for it. In particular, when a device is suspended and a resume ioctl is sent, this now avoid memory allocation completely. The variable "struct dm_ioctl tmp" is moved from the function copy_params to its caller ctl_ioctl and renamed to param_kernel. It is used directly when the ioctl function doesn't need any arguments. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
This patch introduces flags for each ioctl function. So far, one flag is defined, IOCTL_FLAGS_NO_PARAMS. It is set if the function processing the ioctl doesn't take or produce any parameters in the section of the data buffer that has a variable size. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Jun'ichi Nomura 提交于
This patch merges io_pool and tio_pool into io_pool and cleans up related functions. Though device-mapper used to have 2 pools of objects for each dm device, the use of bioset frontbad for per-bio data has shrunk the number of pools to 1 for both bio-based and request-based device types. (See c0820cf5 "dm: introduce per_bio_data" and 94818742 "dm: Use bioset's front_pad for dm_rq_clone_bio_info") So dm no longer has to maintain 2 different pointers. No functional changes. Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Jun'ichi Nomura 提交于
Remove _rq_bio_info_cache, which is no longer used. No functional changes. Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Christie 提交于
dm_calculate_queue_limits will first reset the provided limits to defaults using blk_set_stacking_limits; whereby defeating the purpose of retaining the original live table's limits -- as was intended via commit 3ae70656 ("dm: retain table limits when swapping to new table with no devices"). Fix this improper limits initialization (in the no data devices case) by avoiding the call to dm_calculate_queue_limits. [patch header revised by Mike Snitzer] Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.6+ Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Add module aliases so that autoloading works correctly if the user tries to activate "snapshot-origin" or "snapshot-merge" targets. Reference: https://bugzilla.redhat.com/889973Reported-by: NChao Yang <chyang@redhat.com> Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Mark some constant parameters constant in some dm-btree functions. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Refactor part of the bio splitting and cloning code to try to make it easier to understand. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Rename functions involved in splitting and cloning bios. The sequence of functions is now: (1) __split_and_process* - entry point that selects the processing strategy (2) __send* - prepare the details for each bio needed and loop through them (3) __clone_and_map* - creates a clone and maps it Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Remove the no-longer-used struct bio_set argument from clone_bio and split_bvec. Use tio->ti in __map_bio() instead of passing in ti. Factor out some code for setting up cloned bios. Take target_request_nr as a parameter to alloc_tio(). Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: Joe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Kees Cook 提交于
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Remove EXPERIMENTAL from all existing device-mapper targets. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Use block_size_is_power_of_two() rather than checking sectors_per_block_shift directly. Also introduce local pool variable in get_bio_block() to eliminate redundant tc->pool dereferences. No functional change. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Use WRITE_FLUSH instead of REQ_FLUSH for submitted requests to make it consistent with the rest of the kernel. There is no functional change. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Wang Sheng-Hui 提交于
If allocation fails, the local var *t is not used any more after kfree. Don't need to reset it to NULL. Remove the unnecesary NULL set here. Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Support a non-power-of-2 discard granularity in dm-thin, now that the block layer supports this(via 8dd2cb7e "block: discard granularity might not be power of 2" and 59771079 "blk: avoid divide-by-zero with zero discard granularity"). Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Jun'ichi Nomura 提交于
This patch fixes a regression introduced in v3.8, which causes oops like this when dm-multipath is used: general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffff810fe754>] [<ffffffff810fe754>] mempool_free+0x24/0xb0 Call Trace: <IRQ> [<ffffffff81187417>] bio_put+0x97/0xc0 [<ffffffffa02247a5>] end_clone_bio+0x35/0x90 [dm_mod] [<ffffffff81185efd>] bio_endio+0x1d/0x30 [<ffffffff811f03a3>] req_bio_endio.isra.51+0xa3/0xe0 [<ffffffff811f2f68>] blk_update_request+0x118/0x520 [<ffffffff811f3397>] blk_update_bidi_request+0x27/0xa0 [<ffffffff811f343c>] blk_end_bidi_request+0x2c/0x80 [<ffffffff811f34d0>] blk_end_request+0x10/0x20 [<ffffffffa000b32b>] scsi_io_completion+0xfb/0x6c0 [scsi_mod] [<ffffffffa000107d>] scsi_finish_command+0xbd/0x120 [scsi_mod] [<ffffffffa000b12f>] scsi_softirq_done+0x13f/0x160 [scsi_mod] [<ffffffff811f9fd0>] blk_done_softirq+0x80/0xa0 [<ffffffff81044551>] __do_softirq+0xf1/0x250 [<ffffffff8142ee8c>] call_softirq+0x1c/0x30 [<ffffffff8100420d>] do_softirq+0x8d/0xc0 [<ffffffff81044885>] irq_exit+0xd5/0xe0 [<ffffffff8142f3e3>] do_IRQ+0x63/0xe0 [<ffffffff814257af>] common_interrupt+0x6f/0x6f <EOI> [<ffffffffa021737c>] srp_queuecommand+0x8c/0xcb0 [ib_srp] [<ffffffffa0002f18>] scsi_dispatch_cmd+0x148/0x310 [scsi_mod] [<ffffffffa000a38e>] scsi_request_fn+0x31e/0x520 [scsi_mod] [<ffffffff811f1e57>] __blk_run_queue+0x37/0x50 [<ffffffff811f1f69>] blk_delay_work+0x29/0x40 [<ffffffff81059003>] process_one_work+0x1c3/0x5c0 [<ffffffff8105b22e>] worker_thread+0x15e/0x440 [<ffffffff8106164b>] kthread+0xdb/0xe0 [<ffffffff8142db9c>] ret_from_fork+0x7c/0xb0 The regression was introduced by the change c0820cf5 "dm: introduce per_bio_data", where dm started to replace bioset during table replacement. For bio-based dm, it is good because clone bios do not exist during the table replacement. For request-based dm, however, (not-yet-mapped) clone bios may stay in request queue and survive during the table replacement. So freeing the old bioset could cause the oops in bio_put(). Since the size of front_pad may change only with bio-based dm, it is not necessary to replace bioset for request-based dm. Reported-by: NBart Van Assche <bvanassche@acm.org> Tested-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: NMikulas Patocka <mpatocka@redhat.com> Acked-by: NMike Snitzer <snitzer@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 28 2月, 2013 5 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
If something has failed while the array was read-auto, then when we switch to 'active' we need to update the metadata. This will happen anyway but it is good to expedite it, and also to ensure any failed device has been released by the underlying device before we try to action the ioctl which caused us to switch to 'active' mode. Reported-by: NJoe Lawrence <Joe.Lawrence@stratus.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
This doesn't seem to actually help and we have an alternate multi-threading approach waiting in the wings, so just get rid of this config option and associated code. As a bonus, we remove one use of CONFIG_EXPERIMENTAL Cc: Dan Williams <djbw@fb.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: NNeilBrown <neilb@suse.de>
-
- 26 2月, 2013 3 次提交
-
-
由 NeilBrown 提交于
When raid1/raid10 needs to fix a read error, it first drains all pending requests by calling freeze_array(). This calls flush_pending_writes() if it needs to sleep, but some writes may be pending in a per-process plug rather than in the per-array request queue. When raid1{,0}_unplug() moves the request from the per-process plug to the per-array request queue (from which flush_pending_writes() can flush them), it needs to wake up freeze_array(), or freeze_array() will never flush them and so it will block forever. So add the requires wake_up() calls. This bug was introduced by commit f54a9d0e for raid1 and a similar commit for RAID10, and so has been present since linux-3.6. As the bug causes a deadlock I believe this fix is suitable for -stable. Cc: stable@vger.kernel.org (3.6.y 3.7.y 3.8.y) Reported-by: NTregaron Bayly <tbayly@bluehost.com> Tested-by: NTregaron Bayly <tbayly@bluehost.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Mentioning "bad disk number -1" exposes irrelevant internal detail. Just say they are inactive and must be removed. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Create_stripe_zones returns an error slightly differently to raid0_run and to raid0_takeover_*. The error returned used by the second was wrong and an error would result in mddev->private being set to NULL and sooner or later a crash. So never return NULL, return ERR_PTR(err), not NULL from create_stripe_zones. This bug has been present since 2.6.35 so the fix is suitable for any kernel since then. Cc: stable@vger.kernel.org Signed-off-by: NNeilBrown <neilb@suse.de>
-